Facetime via iphone connected to TV, image inverted..why?

I have an iphone 5S. I use the apple lighting adapter to hdmi connection to mirror my iphone to tv. However, when using facetime, the screen get inverted to the opposite of what i am seeing on the iphone. For example, if i hold the phone landscape, the image comes out portrait on tv and vice-versa. So, I end up removing the connection and facetiming without mirroring on tv. I used to be able to mirror landscape screen to landscape screen on tv before but i am assuming this problem started after the software updates.
Any help will be greatly appreciated! Thnk you

Here's an image of the settings too.
Uploaded with ImageShack.us
Message was edited by: CBeditor

Similar Messages

HT1386 MUSIC PURCHASED VIA IPHONE NOT SHOWING UP IN ITUNES

MUSIC PURCHASED VIA IPHONE NOT SHOWING UP IN ITUNES
why is 4.0.1 not in the list - I have 4.0.1 installed on this iPhone

after i entered this post a similar post or a couple clicks ("inward") came up on the sidebar that answered it - no rply needed.

How to fix connection error on facebook via iphone 4s

How to fix connection error on facebook via iphone 4s?

I had the same problem for days. I reset the phone bu holding down the home button and the on off switch together. Don't swipe to turn off. Just hold down the two buttons until phone switched off then wait a few seconds and switch it back on. I can't also use Facebook on safari which I was also having problems with. Hope it helps

TS2756 When trying to update ITunes on my pc using my Iphone 4 personal hot spot via usb connection the download interups and will not install.

When trying to update ITunes on my pc using Iphone 4 verizon personal hotspot via usb connection the download fails.

I called this problem into Apple and they solved it for me. The problem is in the downloader associated with iTunes. Skip that step and go to Apple.com and download the new iTunes softwere update (Version 11.1) directly. I did this and installed it successfully. After restarting the computer iTunes recognized my phone and all was well. Then I updated and installed the ios7 update without any problems. No charge. Full cudo's to Apple!

Ensure image loaded via http connection

hi all
I have a midlet that will load various images and displaying them on a canvas, upon request from the sever via HTTP connection.
And since the operation are being performed via the commands, the http connection code had been placed in another thread.
My question is, how can I ensure that all the necessary images are being loaded before moving on to execute the next code segment in my midlet?

When i try to send the server its unable to recieve image data . it was able to recieve request data.
As we use the same procedure to send data(irrespective of form as i m sending bytes)
Here is the code snippet
private boolean OpenHTTPConnection(String xmlData, String strUrl, String strRequestType) {
        System.out.println("UUURRRRLLL ->" + strUrl);
        System.out.println("XML Data---> ->" + xmlData + "'''''''" + bHTTPStatus);
        int rc, height, width;
        byte[] data;
        byte[] imageData = null;
        InputStream iStrm = null;
        try {
            if (xmlData != null) {
                con = (HttpConnection) Connector.open(strUrl, Connector.READ_WRITE, false);
                con.setRequestMethod(HttpConnection.POST);
                data = xmlData.getBytes();
                System.out.println("1->" + data);
                OutputStream ops = con.openOutputStream();
                System.out.println("----data length---" + data.length);
              ops.write(data);
   if (Snapper.isUpload == true) {
ops.write(Snapper.raw,0,Snapper.raw.length);
                rc = con.getResponseCode();
                if (rc != HttpConnection.HTTP_OK) {
                    result.setText("Server is not ready...");
                if (ops != null) {
                    ops.close();
                xmlData = null;
                imageData = null;
                Snapper.isUpload = false;
            }// end of null check
            else {
                System.out.println("Open the Con using this URL--->" + strUrl);
                // open the specific photo for View module
                con = (HttpConnection) Connector.open(strUrl);
                con.setRequestMethod(HttpConnection.GET);
            strParameters = null;
        } catch (Exception e) {
            System.out.println("Exception------->" + e);
            e.printStackTrace();
            midlet.uiManeger.SetLastErrorCode(Parser.NO_NETWORK);
        return true;
    }

Why I cannot connect to twitter via iPhone?

I just cannot connect to Twitter via iPhone.
It started around 6 months ago, before it was working just fine.
Important notes:
I live in China, dono need to connect to it via VPN.
Interesting thing is that in my iPad app I have no problem at all, can connect, place posts, etc.
Just in iPhone its not possible, not even connecting to the site via Safari.
Why's that? Anyone has any idea on how to solve this problem?

You have to buy Photoshop Express first. It's a In-App Purchase.
Setting>Purchases>Adobe Effect Pack
http://i1224.photobucket.com/albums/ee374/Diavonex/e6e3553e.jpg

HT4437 Is it possible to have my iphone connected via 3g/4g airplay youtube videos to apple tv?

My internet connection is opposite the rest of the universe: I have an iphone 4S with unlimited data. My home internet connection is limited data (rural satellite service). I'm thinking of getting an Apple TV. Is it possible to have my iphone connected via 3g/4g airplay youtube videos to apple tv? Can the iPhone even "see" the apple tv if it's not connected to the home wifi network?

No. Both devices need to be on the same network so they can see each other and stream over the local network.

Facetime stuck at "connecting" or immediately drops after (iPhone 4)

Hello all,
I have just updated to iOS 7 in hopes of fixing my facetime problem, however, no luck found. My facetime was working about a week ago, I was on the phone with someone, then the call just dropped. Tried to call again but the facetime interface would just show the "connecting..." part then never get through again.
I thought it was my school's wifi, but I tried my wifi at home and it still did not work. I also tried resetting network settings and restoring an older iphone backup before updating to iOS 7, and it still does not work.
I have tried with multiple iPhone users, mac users, and even a person sitting next to me in the same room using the same wifi network.
Any help or opinions would be much appreciated in solving this issue!
DC

I have finally manged to sort this frustrating iphone 4 issue regarding NOT being able to Facetime.
First VERY VERY Important ... backup the complete phone on icloud or itunes. (I did not do this and lost my NOTES. Luckily my phone contact were on my Sim Card)
Step 1 . Go to settings and Reset complete phone to factory default (Settings - General - Reset All Settings (Enter code if requested) - Erase all Content and settings.
Step 2 . Once reset you will have a factor default iphone (In my case it had ios7 on boot up)
Step 3 . Setup as new phone in itunes i.e choose english then find my phone - icloud etc etc etc
Step 4 . Test out facetime (DO NOT restore Apps or Music at this stage)
Step 5 . Once facetime worked I restored my Music ,videos etc from itunes.
Really happy that finally it all works..
Trust this helps all the frustrated people out there who can not facetime on iphone 4

Iphone 4 facetime won't connect to my wifi ?? AT

iphone 4 facetime won't connect to my AT&T wifi

Take a look at the link: troubleshooting factime
http://support.apple.com/kb/TS3367

FaceTime fails to connect snow leopard imac

The setup is a home network with ethernet to an up-to-date snow leopard iMac and the WiFi on the same subnet, running off of a Linksys wft54g with the latest firmware. uPnP is enabled on the router.
From a Macbook Air with Lion on a network at work, I can call and receive FaceTime calls to the iPhone on the home WiFi network.
However, FaceTime rings but fails to connect on the iMac.
So, Facetime to/from iPhone is going through the same home router over the same network using the same DNS, etc.. and it works.
But Facetime to/from the iMac does not. I've tried with the firewall on/off on the iMac as well as google DNS, etc., with no luck.
If the Lion MBA is on the same network, all works fine.
Any ideas? What is different about Facetime btw iPhone and snow leopard iMac that causes this difference?
Much appreciated.

HI. I have a macbook air 1.3 ghz intel core i5 / 4gb 1600 mhz ddr3, and i use OS X mav 10.9.4.
Today i tryed to conect facetime either to another same macbook air or iphone 5 and i cant see my camera image.
Facetime opens and i can get audio but no image at all.
Preferences are not available on menu. if i click, it goes gray (notjing shows up) then its impossible to see it.
I have tryed reinstaling os x and also reset smc and nothing worked so far.
I open photo both and image not showing also. open skype and camera preview not showing.
Could it be a problem with my camera? if so, why cant i log in my facetime preferences??
Tks

Why does FaceTime keep saying "connection lost" when we both have full bars on our wifi?

Why does FaceTime keep saying "connection lost" when we both have full bars on our wifi? My friend in Texas has tried to call my via FaceTime but for some reason, every time she does, it keeps saying "connection lost" when we both have full bars on our wifi. Keep in mind, I am from Nebraska so we have the same time zone and I have an iPod 4 while she has a iPhone of some sort but that shouldn't matter because I am still able to FaceTime my friend in California, which is two hours behind me. So, I guess I just want to know why I cannot reach my friend in Texas. Please, someone help me!
-Mukestina

Apple has released a document which is reported to address the recent FaceTime issue.
http://support.apple.com/kb/TS5419

Unable to Re-Setup Airport Express via iPhone or OSX

Hi, folks —
Am temporarily in a friend's house and want to reconfigure my airport express for music playback. Have never had issues with the AE before, but I can't get it configured — either via iphone or imac.
I have my iMac and iPhone 5s both on my friend's wifi network. I have factory reset my AE. It is flashing amber.
iPhone 5s (iOs 7.0.3)
The reset AE never appears in the Airport Utility on the iPhone. Internet appears and "No AirPort base stations have been found. Airport Utility will continue searching" is all it shows.
The phone is not connected to any VPN. I've tried this both connected to the friend's wifi network and just on the cellular network (LTE).
OSX Mavericks (all sub-updated installed as of Nov 12)
1. Reset AE appears under "Other Wi-Fi Devices (1)"
2. I select it, and when given the option, I choose "Add to Existing Network" under Other Options.
3. I name the new AE and give it a "test" password.
4. After several apparently successful steps (adding network, configuring, connecting, etc), the iMac itself loses internet connection during the attached screenshot step ("GVTC147650" is the wifi network name). The menu bar wifi turns to a greyed out wifi icon with an exclamation mark.
5. The Utility proceeds to "Waiting for [AE Name]".
6. This times out, leading to a "An unexpected error occurs" message.
At this point, the AE setup is incomplete and my iMac internet connection is broken. I am successfully connected to the wifi network, but told (in the menubar dropdown): "Alert: no internet connection"). The iphone connected to the same network can still access the internet without issue. The only way to solve the latter is to turn off wifi, remove the remembered ssid, and reconnect to it (when I am asked again for the password).
Any thoughts? This is pretty **** annoying. Should be so simple.
Thanks in advance for any suggestions!

The reset AE never appears in the Airport Utility on the iPhone
Did you tap Settings, then tap Wi-Fi, and then tap on the AirPort Express under the heading of Set up a new AirPort Base Station?
Is your friend using WPA2 Personal wireless security on his router/network?
That is what the Express wants to see, and it will not connect to the network if it doesn't. instead, you will see "An unexpected error has occurred" over and over, etc.

How do i let my iphone connect to my computer wifi with usb ?

As the title stated,
How do i let my iphone connect to my computer wifi with USB ?
The reason is because my iPhone 3Gs wifi having some problem. So i have to use a USB cable to connect to my computer and let my iphone to connect to the internet .
If i don't do this i would have to keep on running out & in to my room & my living room.
My iPhone 3Gs allows to connect to the wifi when i am in my living room, but once i enter my room the wifi won't be able any more. So please help me out please people
I'm not sure about why i can't connect to my Ad hoc even it's so near, but i can connect to my router if i am in living rooms.
Regards,

I believe the next time you sync your phone to itune via the cord, you will have to check the box that says sync via wifi and also enable that setting on your iphone.

Not able to import User Profile Property via BDC Connection

I want to fill some of the user profile properties via BDC Connection. I already have created more than 50 user profiles which I imported from AD. Now, in order to import profiles properties using BDC, I performed below steps:
a) Ensured Business Data Connectivity and Secure Store are running and used account has Full permission on these services.
b) Created an external content type using SharePoint Designer and created an external list to ensure that data is available:
Set email field as identifier, which is one of the columns in SQL table and is a primary key.
Created Read Item and Read List operations on above ECT.
c) Checked the presence of above ECT in BDC service and ensured it has all necessary permissions i.e. Edit, Execute etc.
d) Configure a new synchronization connection in User profile Service by selecting the same ECT. Here I chose to connect 1:1 mapping and picked up WorkEmail property to return items.
e) Mapped one of the custom property with one of the fields of SQL Server. Here, I ensured they both have same type.
f) Ran Full Synchronize after above steps. On checked, I do not find any data in the mapped properties.
Below are the traces of LOGS:
Profile sync step BusinessConnection (stage BusinessDataCatalogFullImport) finished successfully. 8ecffe9c-6d0a-e0e8-ec25-eb7a5f1c1215
04/21/2015 12:37:00.68 OWSTIMER.EXE (0x337C)                   0x02DC SharePoint Portal Server      User Profiles
ac4iu Medium Profile sync step BusinessConnection (stage BusinessDataCatalogFullSync) started execution.
04/21/2015 12:37:00.68 OWSTIMER.EXE (0x337C)                   0x4CCC SharePoint Foundation         Topology
8xqz Medium Updating SPPersistedObject UserProfileImportJob Name=UserProfileServiceApplication_ProfileImportJob. Version: 2294209 Ensure: False, HashCode: 36728399, Id: 4f037df6-d339-4b5a-8892-ef3699c16b20, Stack:    at
Microsoft.SharePoint.Administration.SPJobDefinition.Update()     at Microsoft.Office.Server.UserProfiles.UserProfileImportJob.SaveStatus()     at Microsoft.Office.Server.UserProfiles.UserProfileImportJob.Execute()
at Microsoft.Office.Server.Administration.UserProfileApplicationJob.Execute(SPJobState jobState)     at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService,
Int32& result)     at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result) 8ecffe9c-6d0a-e0e8-ec25-eb7a5f1c1215
04/21/2015 12:37:01.70 OWSTIMER.EXE (0x337C)                   0x4CCC SharePoint Portal Server      User Profiles
ac4iq Medium Profile sync step BusinessConnection (stage BusinessDataCatalogFullSync) finished successfully. 8ecffe9c-6d0a-e0e8-ec25-eb7a5f1c1215
04/21/2015 12:37:01.70 OWSTIMER.EXE (0x337C)                   0x4CCC SharePoint Foundation         Topology
8xqz Medium Updating SPPersistedObject UserProfileImportJob Name=UserProfileServiceApplication_ProfileImportJob. Version: 2294211 Ensure: False, HashCode: 36728399, Id: 4f037df6-d339-4b5a-8892-ef3699c16b20, Stack:    at
Microsoft.SharePoint.Administration.SPJobDefinition.Update()     at Microsoft.Office.Server.UserProfiles.UserProfileImportJob.SaveStatus()     at Microsoft.Office.Server.UserProfiles.UserProfileImportJob.Execute()
at Microsoft.Office.Server.Administration.UserProfileApplicationJob.Execute(SPJobState jobState)     at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService,
Int32& result)     at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result) 8ecffe9c-6d0a-e0e8-ec25-eb7a5f1c1215
04/21/2015 12:37:02.53 OWSTIMER.EXE (0x337C)                   0x319C SharePoint Foundation         Monitoring
nasq Medium Entering monitored scope (Timer Job job-upgrade-sites). Parent No 9f354308-7b18-40f3-80d6-c7d0616cd9e5
04/21/2015 12:37:02.53 OWSTIMER.EXE (0x337C)                   0x319C SharePoint Foundation         Logging
Correlation Data      xmnv Medium Name=Timer Job job-upgrade-sites a0cffe9c-7d80-e0e8-ec25-e024bd692f28
04/21/2015 12:37:02.67 OWSTIMER.EXE (0x337C)                   0x319C SharePoint Foundation         Monitoring
b4ly Medium Leaving Monitored Scope (Timer Job job-upgrade-sites). Execution Time=136.402252241556 a0cffe9c-7d80-e0e8-ec25-e024bd692f28
04/21/2015 12:37:04.94 w3wp.exe (0x4440)                       0x4070 SharePoint Portal Server      Runtime
8gp7 Medium Topology cache updated. (AppDomain: /LM/W3SVC/1712947452/ROOT-1-130740700225995467)
04/21/2015 12:37:05.00 OWSTIMER.EXE (0x337C)                   0x1FA0 SharePoint Foundation         Monitoring
aeh57 Medium Sql Ring buffer status eventsPerSec = ,processingTime=0,totalEventsProcessed=0,eventCount=0,droppedCount=0,memoryUsed=0
04/21/2015 12:37:05.52 w3wp.exe (0x4440)                       0x3DD8 SharePoint Foundation
Topology                      e5mc Medium WcfSendRequest: RemoteAddress: 'http://172.20.21.163:32843/af95f58c149b4b61b13c0d0250479beb/MetadataWebService.svc'
Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges2' MessageId: 'urn:uuid:324f52f2-8c3a-49e3-9d2c-6119776db97b' 08d6992a-9413-4d09-b8f9-bcfb08266cc7
04/21/2015 12:37:05.52 w3wp.exe (0x4848)                       0x3D98 SharePoint Foundation
Monitoring                    nasq Medium Entering monitored scope (ExecuteWcfServerOperation). Parent No
04/21/2015 12:37:05.52 w3wp.exe (0x4848)                       0x3D98 SharePoint Foundation
Topology                      e5mb Medium WcfReceiveRequest: LocalAddress: 'http://ispantest.domainname.local:32843/af95f58c149b4b61b13c0d0250479beb/MetadataWebService.svc'
Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges2' MessageId: 'urn:uuid:324f52f2-8c3a-49e3-9d2c-6119776db97b' 08d6992a-9413-4d09-b8f9-bcfb08266cc7
04/21/2015 12:37:05.52 w3wp.exe (0x4848)                       0x3D98 SharePoint Server
Taxonomy                      fuc5 Medium MetadataWebServiceApplication.GetChanges called on 'Managed Metadata Service' starting. 08d6992a-9413-4d09-b8f9-bcfb08266cc7
04/21/2015 12:37:05.53 w3wp.exe (0x4848)                       0x3D98 SharePoint Server
Taxonomy                      fuc6 Medium MetadataWebServiceApplication.GetChanges called on 'Managed Metadata Service' completed. 08d6992a-9413-4d09-b8f9-bcfb08266cc7
04/21/2015 12:37:05.53 w3wp.exe (0x4848)                       0x3D98 SharePoint Foundation
Monitoring                    b4ly Medium Leaving Monitored Scope (ExecuteWcfServerOperation). Execution Time=2.03964470344695 08d6992a-9413-4d09-b8f9-bcfb08266cc7
04/21/2015 12:37:05.53 w3wp.exe (0x4440)                       0x3DD8 SharePoint Foundation
General                       aipzw High    An exception occurred while writing a service call usage
entry. Exception details: System.ObjectDisposedException: Safe handle has been closed     at
System.Runtime.InteropServices.SafeHandle.DangerousAddRef(Boolean& success)     at Microsoft.Win32.Win32Native.GetTokenInformation(SafeTokenHandle TokenHandle, UInt32 TokenInformationClass, SafeLocalAllocHandle TokenInformation,
UInt32 TokenInformationLength, UInt32& ReturnLength)     at System.Security.Principal.WindowsIdentity.GetTokenInformation(SafeTokenHandle tokenHandle, TokenInformationClass tokenInformationClass)     at System.Security.Principal.WindowsIdentity.get_User()
at System.Security.Principal.WindowsIdentity.GetName()     at System.Security.Principal.WindowsIdentity.get_Name()     at Microsoft.SharePoint.Utilities.SPUtili... 08d6992a-9413-4d09-b8f9-bcfb08266cc7

Thanks for the very clear answer back. You're a star. Much appreciated and better to know where you stand directly. Have called the helpdesk and are willing to solve and take this one back in, although it will hurt. The macBook Pro continues to be out of reach economically, so it would need to be the white macBook...
Just wanted to check some last items before making final decisions as I am checking an alternative workaround
- my camcorder supports recording on memory stick which can then be read into iMovie without problem. Any idea if memory stick is lower in resolution as normal DV tape recording? If this is comparable I can choose to from now on switch to memory stick. When I record on the stick it is then recognised as MOV.
- is there any other (non apple made) OSX software on the market to facilitate only the USB driven capturing? Hence did any other SW supplier plug this hole? The old windows pc has proven that the camera streams images via the USB port (hence don't at all understand why iMovie cannot just support capturing via USB streaming...!!!!) and I understand it is more that iMovie doesn't support capturing images via USB, but does anybody else at least for the capturing bit?
- You read about Firewire - USB adapters/hubs/convertors. It is however never clear if it would solve this issue. Dead-end street or an option?
- I can capture my archive of old tapes on my old PC and then put them into my Mac. However the capturing SW makes one large file of it and no event is split. Any idea if on import iMovie could automatically split this into different events (based on date or start/stop?)
- final question: does iMovie when capturing video from tapebased camcorder automatically split events based on date or start/stop? Would be silly to make switch and then still find out I need to manually make the cuts.
Very grateful for your support. Just a couple of days left to make final decision...

Windows XP can no longer "see" my iPhone as a camera/imaging device

can't sync photos from iPhone to computer; Windows XP doesn't even see it as a camera or imaging device. Weird, since iTunes is able to synch music/contacts.
No matter how I check, Windows XP can't find the device:
control panel --> scanners and cameras - nothing!
My Computer --> devices with removable storage - no iPhone
Computer Management--> Device Manager - no iPhone or scanner/camera

UPDATE - I think I've resolved my problem and that it is related to having my iPhone "passcode locked".
1. I connected it and unlocked the iPhone, synced music, but had the problems I noted in my original discussion post
2. I disconnected the iPhone, closed iTunes, reopened iTunes and reconnected the iPhone (making sure it was NOT passcode locked before connecting it) -- everything works fine.
3. now I can get back to my original issue, was to figure out how to get only my NEW iPhone captured photos to synch, or at least have them date ordered. But that's a subject for another post.
BOTTOM LINE - passcode lock may be the key for those who are having problems with their PC not able to see the iPhone as a camera/imaging device

Facetime via iphone connected to TV, image inverted..why?

Similar Messages

Maybe you are looking for