Facetime with iPad issues. Help please

Own an iPhone 4 and iPad (3rdgen) and using facetime without issue until ios7 upgrade. iPhone not upgraded as no space. Now I cannot receive facetime calls on iPad but can make them. Can receive calls on iPhone but they cannot connect. Not sure if just coincidence with upgrade but would appreciate any solutions.

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

Similar Messages

Hello.I wanted to upgrade my iPad 1 to iOS 5.1 Over the Air.I was running iOS 5.0.1.It said it had an error connecting to server.It is already 5 hours i cant install this update.I also have an iPhone 4 with iOS 5.0.1 with the same issues.Help please!

Hello.I wanted to upgrade my iPad 1 to iOS 5.1 Over the Air.I was running iOS 5.0.1.It said it had an error connecting to server.It is already 5 hours i cant install this update.I also have an iPhone 4 with iOS 5.0.1 with the same issues.Help please!

You're probably running into the servers simply being swamped. Thousands of people are all going for the software update at the same time. Give it a try again and if that doesn't work, then try plugging it into your computer and trying it that way.
I didn't get a notion of the size, it doesn't seem to be as big as the 700 meg 5.0 update, but it did take me 20+ minutes to download via cable internet so it's a large file. That in and of itself takes a while.
If you're trying to download it directly to your iPhone, you'll need to be on wifi since I'm sure it's well over the 20 meg file size limit for 3G.

Recently i upgrade my iPad2 to 7.1(11D167) and now the wifi connection is very weak, I am not sure if it is a hardware or software issue, help please!

Recently i upgrade my iPad2 to 7.1(11D167) and now the wifi connection is very weak, I am not sure if it is a hardware or software issue, help please!

I am not sure, I have full signal on my iphone 5 and just 1 dot on my ipad, tomorrow I will test connection with other router and network, I thank you for your help and I will tell you the test result when done

My imessage isn't working when i send messages to people with iphones that have imessage it works with very few people, now it's starting to stop working with those people. help please.

my imessage doesn't work between my friends and i. i have a new iphone 5. my messages only work with some people. with others imessage doesn't work in the first place and now its starting to stop working with other people help please.
& yes we all have imessage on.

Hi there,
I see that you are having IMessage problems. Some of the problems might be:
- Your friends IMessage is not activated (you have to activiate it with your apple id)
- Your IMessage is not activated
Here is some links to another person`s Imessage problems:
https://discussions.apple.com/message/17301880#17301880
https://discussions.apple.com/message/20142285#20142285
https://discussions.apple.com/message/18988318#18988318
Hope that helps!

After mixing a project i select bounce and burn the disc that is burned plays on any cd player but when i try to burn the wav or mp3 file that was created the resulting disc will only play in a computer this also happens with video projects help please

after mixing a project i select bounce and burn the disc that is burned plays on any cd player but when i try to burn the wav or mp3 file that was created the resulting disc will only play in a computer this also happens with video projects help please are there any settings i need to alter as it seems the wav or mp3 file i ceated is being converted to a data file somewhere between the folder and disc drive

Same thing for a movie file.. If you want to play back the movie via a DVD and a DVD player you must create a Movie DVD and not just burn files to a data DVD... as Data DVDs are just storage devices for files and therefore will only work with computers...
Movie DVDs are special formats that include things like menus and special file formats.. so they can playback via a DVD Player...
You will need a 3rd party DVD Burning app like Toast which is what i actually use.... or the more popular DVD Creator app...to create and then burn a Movie DVD that will playback on a DVD Player....
https://answers.yahoo.com/question/index?qid=20101220205435AA70beb

Trouble doing FaceTime with iPad 2 using email address. Please help?

I have an iPhone 4S my wife also has an iPhone 4S
I have iPad 2 as well.
While at home connected to the same wifi source
I am able to do FaceTime video chat with each phone just by dialing the number of the other phone
I am able to do FaceTime connection from iPad2 by dialing either one of the phone numbers
However if I try to do FaceTime with iPad2 using the registered email account
it says busy call back
I went to work and connected my iPhone to another wifi
I tried FaceTime with with the iPad2 using the registered email it says myphone or iPad is busy
Both the iPhones and the iPad2 have the same registered email address
Even if I enter an alternate eamil address in iPad2 it still says my phone or iPad is2 busy call back
iphone 2 iphone using same wifi ok
ipad to iPhone using the same wifi ok
ipad to iPhone with each using different wifi it is still ok
however iphone to Ipad using the registered email address it is not going through
whether the ipad is connected to the same wifi or different wifi
Any suggestions
Indyram

Figured it out
Here are some tips
If you want to Facetime using email address with another apple device
be it iPhone or iPad each individual device has to have a unique email address
You can have the same ID for billing purposes but for FaceTime connection
it has to have different email addresses
In Settings select Facetime and make sure you have different email addresses
If not you will get a busy signal
To connect to an iPad you have to use the email address assigned to the facetime of that iPad
To connect to the iPhone you can use either email address or the phone number
Hope this will help some one
Ram

No vídeo in my TV with original cable component and Ipad air, help please.

How can I see my Ipad air and moviles in my TV with the original component cable, at the moment no works.
Help please.

Hey adbridge683,
This is usually in reference to USB issues. This article has great step by step troubleshooting, so you can see the steps first hand yourself to try. http://support.apple.com/kb/ts3694#error50
There's really only about 7 things to look for in there, and I hope that one of them helps you out!
Let me know.
-Regards

We recently purchased the iphone5 (2) and are having problems with sound coming thru the earbuds when we plug them in to the iphones. works fine with the ipad. help please

recently purchased the iphone5 (2 of them) and are having problems with the earpods. no sound when plugged in to the iphone. both phones. works with the ipad. help please

Hi P5052,
Welcome to the Support Communities ... and congratulations on the purchase of your iPhone 5's!
It is very unusual that neither phone is working with the new earpods.
Have you tried a different headphone just to see if the issue is with the earpods or the iPhones?
The article below will give you the basic troubleshooting steps for this issue.
Click on the link below to see more details and screenshots.
I've quoted some helpful highlights for you:
iPhone: Can't hear through the receiver or speakers
Symptoms
When someone calls, I can't hear them through the receiver or speaker phone, and I can't hear music through the speaker. I also can't be heard by someone who is calling me.
Note: iPhone has one speaker, which is adjacent to the dock connector. On iPhone 4 or later models, the speaker is to the right of the dock connector. On earlier iPhone models, the speaker is to the left of the dock connector.
Resolution
Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
Make sure the Ring/Silent switch is not switched to silent.
While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (chooseSettings > General > Bluetooth).
Restart the iPhone.
If restarting the iPhone doesn't resolve the issue, try restoring the device.
If the issue persists, go to the Service Answer Center - iPhone for information on service.
Hope this helps!
- Judy
<Edited by Host>

Windows 8, Y55 ideapad continual clicking issue with touchpad. Help please

For some reason, when I tap to click the item I clicked remains actively clicked when I move my hand away from the touchpad. In order to process any action, I need to move my cursor away from the button I'm trying to click.
Interestingly enough I tried to disable tapping to see if it would solve the issue, and tapping continued to work...which is odd. It doesn't have this issue when I click objects with a mouse, only when I use the trackpad. Please help me, I'm confused.

hi BFG9000,
Welcome to Lenovo Community Forums!
You can try Uninstalling the driver of your touchpad from Device Manager, under Mice and other pointing device and make sure to put a check on Delete Driver/software prompt.
Then try Checking the touchpad if it works ok without a driver, If it does then try downloading a driver from synaptics website.
If not then Most likely this is a Hardware concern and you need to contact Lenovo Technical Support for assistance.
Best Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

N8 wlan and hard reset issues, help please

Have a nokia N8, after installing Connectivity analyser beta from beta labs, my wifi reception has become very poor. i ave a wireless N router and before this date the signal was very strong. my friend has an N8 also, he tested the rooms i was having signal issues to see if the router was the problem, however he had excellent signal, leading me to think it was my phone. i uninstalled the app and he weak signal remained, i did a factory reset and the problem remeained, i did a hard reset and the problem is still there, I now have the added problem of no Ovi Suite and other Qt related app issues. Help please, this is really annoying. btw this is my second N8, really getting annoyed at Nokia now. any further specs, please ask

As synth_fg rightly points out it takes quite a bit of tinkering to recover from "hard reset" on N8. To give you an idea what would be involved:-
Download from Ovi Store website the sis installer of WordPress and install it on phone (wordpress install also Nokia Smart Install and all QT and PIPS components)
Launch Ovi Store on phone: which will download the .sis installer and should work without any error
Reinstall Social_1_2_update.sisx from here: http://nmota.messaging.nokia.com/clients/Social_1_2_update.sisx
At this point you are still without OVI Maps but you can install v3.06 pre-release from Nokia Beta Labs: http://betalabs.nokia.com/apps/ovi-maps-306 which will allow you to pinch to zoom on your N8
Happy to have helped forum with a Support Ratio = 42.5

IPad/iMovie help please!

Hey there...I have the "New iPad and have recently downloaded the app iMovie and iPhoto in hopes of putting together a slide show for my daughter's 13th birthday. That being said, I have about 50 pictures that I selected, fixed to fit the screen and they worked perfectly and I was able to preview the slide show with no issues. Today when I started to add a few more pictures all the pictures seemed to overlap and the ones that I had fixed as far as how long I wanted them to show on screen changed to a much longer period (meaning that one picture would show for a very long time). In addition when I tried to preview the show it was a blank screen. you could see it was moving, however, everything was black. Does anyone have any ideas for me?
One more question...as I am new to this, do you think I am really chancing trying to put this on my PC so I can show it at the ice skating rink or is there a way to hook my iPad up to the projector at the rink?
Thank you for your help!
Bonnie

Hi Applefananswer,
If you are having issues transferring your project to your Camera Roll, you may want to try transferring it to iTunes on your computer, then transferring it back. This will also give you an opportunity to back up the file, should anything happen to it during further troubleshooting on your iPad. You may find the following article helpful:
iMovie for iOS (iPad): Send to iTunes
http://support.apple.com/kb/PH3238
Regards,
- Brenden

Macbook stuck on white screen with apple logo. help please

I have a macbook (black model) and while I was surfing on internet it is frozen. so I shut it down and restarted. When I restarted, it stuck on white screen with gray apple logo and seems like booting but nothing happens.
after that, I restarted again and put installation disc (leopard) without pressing any key and it opened normally. I backed up os with time machine but in one hour it is frozen again.
restarted again but this time it did not boot normally. so i tried booting from cd with c key, it opened installation screen. I have opened disk utility top repair disk, but when I click on disc image, repair / verify disk buttons are unavailable to click and S.M.A.R.T status is not supported.
After all, I tried to erase and install system several times, but after language section when I click agree to terms and conditions, mac freeze again.
So, I do not know what to do. Any help please?
Note: I already tried PRM and Safe Mode. (after safe mode it took me to installation screen again and nothing changed.)
Any help would be much appreciated!
Uptade: Also, opened system profiler and clicked on Serial-ATA, it seems loading but do not show any info. stucked again! help please
Message was edited by: burakbey

HI,
*"I have opened disk utility top repair disk, but when I click on disc image, repair / verify disk buttons are unavailable to click and S.M.A.R.T status is not supported."*
You need to select "MacintoshHD 10.5.8 not "disc image" in order to run Disk Utility and Verify and if necessary, Repair the disk.
That's why you are seeing this dialog.
*are unavailable to click and S.M.A.R.T status is not supported.*
Also, run the Apple Hardware Test.
http://abclocal.go.com/kgo/video?id=7011117
Carolyn

Facetime with iPad 3 g / wifi

Can you use the new iPod Touch Facetime with the iPad 3g / wifi?

The cell carriers - at least all I know of - do not allow Facetime over their connections, so you need to use WiFi.
BTW, you'll generally have better luck getting replies to a question if you avoid posting in a seven-month-old thread, particularly one started by someone else. You'll also have better luck with iPad questions if you post in the iPad forums.
Regards.

Login Issues - Help please

Hi All-
I had to reinstall the OS system and now it is asking for a login. Not sure what it is-so I go back to the start up cd hold down C get to change password. Change password as system admin (root level). Quit installer and restart the mac. enter my name and the new password the screen shakes and drops out the password. What am I doing wrong?
Help please.
LB

Hi Sherry-
Thanks for the info - Just a brief history on my problem.
I was trying to open an application on the mac and it froze - nothing would work. I powered down at the surge protector. restarted to have the mac hang on the grey screen with the apple. Let it sit for 15 min with nothing. Called and apple dealer near us and was told to reinstall the OS. I had to do an archive & install. I think I had 10.3.9 but the system cds were 10.3.1 or something like that. So reinstalled and you know where I am. SO, should I still restore the netinfo data base? Will this effect my network with others. I back up my HD to another mac at night and vicea versa.
Thoughts.....
Thanks for your help!
Larry

My phone although fully charged has just switched itself off and won't turn back on again! I'm just coming to the end of a 2 year contract and never had any problems with it. Help please!

My iPhone 4 although fully charges has just switched itself off and won't turn back on again. I've tried taking the sim card out but nothing happens. I'm just coming to the end of a 2 year contract and never had any problems with it before. Help please.

Start here
http://support.apple.com/kb/HT1430

Facetime with iPad issues. Help please

Similar Messages

Maybe you are looking for