Facetime won't go past the verifying stage, yet I've verified the email?
Hi Guys,
I'm new to this!
I'm trying to connect to Facetime, however I have verified the email that was sent!
I am able to type in my password and get to the stage when it verifys it, however it then goes back to the previous screen and i have to type in my password again?!
Any ideas will be muchly apprieciated of what to do!
A common thumb rule says, that you should have at least 10% of the total disk capacity as free space for swapping files and system usage. As this is a number for smaller drives, on actual big drives the percentage can be smaller, but depending on your actual RAM size the system may use the disk for swapping and need a few GB space.
Warning: audit space low (< 5% free)on audit log file-system
In your case, it's a low-level system error connected to some log operation. It may be that an existing log file is too large or has become corrupted such that the OS cannot add to the log.
First Aid
Try to boot in single mode and clean the logs or shoot off the Audit mode with CLI command "sudo audit -t" (without the braces)
If that does not solve the problem start (if possible) the system as a target from a nother Mac (target mode) and perform a logfile cleanup with a apropriate tool; e.g. TinkerTool.
Lupunus
Similar Messages
-
When I try using Migration Assistant an error appears on my pc... "An error occurred while preparing your information for transfer." My mac just continues searching for the pc and yet both are on the same wifi. I'm not getting anywhere! Please help!!!
Simple...
http://www.apple.com/uk/support/mac/app-store/contact/ -
Have an iMac. Problem is I hear the fan noise, yet no power on the screen yielding no power. I have checked the power cord and it seems to be fine. Not sure if computer is a total loss. What would be the next step?
<Email Edited by Host>What does the EMC# say on the base?
-
I cannot synch movies to my iPad. This has worked for me in the past. I keep getting an error message that I am not connected to the internet. Yet, I certainly am. How else could I post this message. I can listen to music clips from the iTunes store, fetch my email, and read current newspapers on the internet. I restarted both my iMac and my Ipad and that didnot help.
I completely understand what is happening. I know that you are connected to the Internet. I made the suggestion because I have seen it work in similar circumstances. The Apple iTunes servers can be a bit fussy about things and sometimes rebooting the router clears up this miscommunication between iTunes and your network.
Have you tried signing into your account and then try to sync again. Go to Store>View Account. You will have to enter your password. Then try to sync again. Or try signing out completely in Store>Sign out. Quit iTunes, sign in again and then try to sync again.
Sometimes refreshing settings will help clear up weird problems. -
Help!
Try going to icloud.com from your computer, opening Mail and ensuring that you don't have any unread emails in your inbox or in any of your folders. If not, try going to Settings>Notifications>Mail and turn Badge App Icon to Off. (If you have multiple email accounts, tap each account separately then turn Badge App Icon to Off.) Then force-close the Mail app: from the home screen, double-tap the home button, locate Mail in the list at the bottom, tap and hold it until it wiggles, tap to close it, then tap the home button again. Next, go back to Settings>Notifications>Mail and turn Badge App Icon back to On. The reopen Mail and see if it's cleared now.
-
TS3824 2011 mac mini won't go past white screen with apple logo
My Mac mini won't move past a white screen with apple logo in the center. What should I do?
Hi ..
If you have v10.7 Lion installed, use Lion Recovery to repair the startup disk if necessary, or reinstall the Mac OS X.
If you are running a prior Mac OS X, boot from your install disc, run Disk Utility. The startup disk may need repairing > Using Disk Utility to verify or repair disks
And try Resetting your Mac's PRAM and NVRAM -
Hello,
I'm new with edge animate, but i fell in love with it.
I'd like to know, is it possible to load different html pages dynamically in the main stage in order to avoid the preloader to be load?
I can figure out how to save all the pages of the site, but i can't merge them in a continuous animated browsing experience.
As sample.
I've got a index.html and home.html, how to switch form index to home without having a clear division between the two pages?
I can place all the animations within a file and this will allow me to have a continuous surfing experience but it won't generate specific and google indexable pages within the site.
Example, index.html will generate www.mysite.com, home will generate www.mysite.com/home. How ho switch dinamically between them and integrate them in a unique fading experience?
Thanks in advance for any help. I'm a newby, but i would like to learn.
Fea.Look into using the Loader class to load the swf files. If you want to have it happen in different frames then you can put the code into the different frames.
-
Iphone 4 facetime won't connect to my wifi ?? AT
iphone 4 facetime won't connect to my AT&T wifi
Take a look at the link: troubleshooting factime
http://support.apple.com/kb/TS3367 -
Access a nested symbol timeline from the main stage
Hi all,
Would love some help on accessing a nested symbol from the main stage please.
To set the scene.....
"Its an autumn day..
no sorry...just joking...
So i have a symbol called "NormalAnatomy" - its not on the main stage, but when a button is clicked it appears in the 'content' box which is just a rectangle on the main stage.
Inside "NormalAnatomy" symbol is another symbol called "Scrub_all" which is an animation
For users to view the animation they use a scrub bar like this lovely lady has invented:
Create Click and Touch Draggable Scrubbers with Edge Animate CC | sarahjustine.com
So for Sarah Justines scrubber to work - the main stage has a lot of actions added to it. Also the "timelinePlay" symbol is on the main stage
Its starts:
var symDur = sym.getSymbol("timelinePlay").getDuration();
var mySymbol = sym.getSymbol("timelinePlay");
var scrubber = sym.$("scrubber");
var bar = sym.$("bar");
sym.$("mobileHit").hide();
var dragme = false;
So I put my "NormalAnatomy" symbol on my main stage to see if the code would work and changed all the relevant details.. and indeed it worked!
var symDur = sym.getSymbol("NormalAnatomy").getSymbol("Scrub_all").getDuration();
var mySymbol = sym.getSymbol("NormalAnatomy").getSymbol("Scrub_all");
var scrubber = sym.getSymbol("NormalAnatomy").$("scrubber");
var bar = sym.getSymbol("NormalAnatomy").$("bar");
sym.getSymbol("NormalAnatomy").$("mobileHit").hide();
var dragme = false;
But i don't want the "NormalAnatomy" symbol to be on the main stage as I want it to appear in the 'content' box only when i hit a btn
So as soon as I took this symbol off the main stage, the scrubber doesn't work. So I click a btn, and the symbol appears in the content box but the scrubber doesn't work.
so I tried in front of the "NormalAnatomy"
getStage().
getStage("content").
getComposition().getStage().
getSymbol("content").
but nothing works
The main problem must be the fact that the NormalAnatomy symbol appears inside a content box so the MainStage actions doesn't know how to find it??
So my question is... what should I put in the main stage actions to make it access the "NormalAnatomy" symbol?
Thanks for your help in advance!On click handler for the symbol use
sym.getComposition().getStage().getSymbol("nameofsymbol").play();
or
sym.getSymbol("nameofsymbol").play();
replace the italics with the literal name of the symbol as it appears in the Elements panel.
Some API details found here (http://www.adobe.com/devnet-docs/edgeanimate/api/current/index.html) in the Work With Symbols section.
Darrell -
How can I use Chrome Frame when the downlevel stage always displays?
I wan't to try Chrome frame but even after the user installs chrome frame the Edge animation will display the downlevel stage content because it detects the browser is older than IE9. Is there some technique to reset play the HTML5 content after installing the plugin?
Hi DickW
Thank you for your help!
I have tried the example.But the example shows how to connect one CAN network with two ports.
I want each port connect to the net can both read and write;
I want to apply the function like this:
1.config the port1 and port2
2,open port1 and port2
But after I open port1 or port2 the other port can't be opened;
After I open the second port it always returns negative.
In the codes I use CAN0 and CAN1 as the CAN objects.
Attachments:
twoport.zip 1184 KB -
Backup to the remote stages is very slow
Hello!
I am facing with the following problem for DB Backup to the remote stage.
If I plan the ALL ONLINE-Backup, then the backup is takes very slow, backups two or more files and aborts.
I have checked the appropriate BTC WP and saw that the WP is holding/waitng.
The reason is RFC.
How can the problem be solved?
Thank you very much!
regards
ThomWithout logs of the backups we can just guess, what is wrong.
Post the log of a failed remote backup here and let´s see then.
Markus -
My FaceTime won't let me sign in, I verified my ID online but when I go to sign in on the iPad 2 it says unable to connect and Wont send me the email?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
Cheers, Tom -
My eyeTV Hybrid won't get past the 'connect to your mac' stage. anyone know whats wrong?
Forgot to put its not recognising the fact thats its plugged in during set-up. But if put it in before i've even started set-up it starts on its own. so my mac know's its there. so confused
-
My macbook won't go past the loading stage when I start it up.
When I turn on my Macbook normally it won't go past the white screen with the grey apple and spinning gear symbol. When I start it up in Safe Mode the progress bar reaches 60% then vanishes. When I start it up in Verbose Mode it says:
Cannot get audit control port
Warning: audit space low (< 5% free)on audit log file-system
and
systemShutdown false
normal code
normal code
Previous Shutdown Cause: 3
Before it stopped loading I had less than 5GB of memory spare if that helps.A common thumb rule says, that you should have at least 10% of the total disk capacity as free space for swapping files and system usage. As this is a number for smaller drives, on actual big drives the percentage can be smaller, but depending on your actual RAM size the system may use the disk for swapping and need a few GB space.
Warning: audit space low (< 5% free)on audit log file-system
In your case, it's a low-level system error connected to some log operation. It may be that an existing log file is too large or has become corrupted such that the OS cannot add to the log.
First Aid
Try to boot in single mode and clean the logs or shoot off the Audit mode with CLI command "sudo audit -t" (without the braces)
If that does not solve the problem start (if possible) the system as a target from a nother Mac (target mode) and perform a logfile cleanup with a apropriate tool; e.g. TinkerTool.
Lupunus -
Facetime for Mac won't get past "verifying"
No e-mail message is being sent. I hit "resend"...nothing.
Can't get beyond this part, so it doesn't work.
It says to follow the instructions in the e-mail to verify the address. I am not getting an e-mail, so I have no instructions. Is there a way to "verify" my address that will circumvent the need to receive the e-mail? I seem to remember doing some sort of verification process to get my daughter's ipod touch Facetime to work. I poked around in mobile me and couldn't find anything.
I added DNS entries for 8.8.8.8 etc.
I am on WIFI on each laptop going through an Airport Extreme hardwired to cable "modem".It seems you didn't read the system requirements on the Facetime for Mac download page:
+"Requires Mac OS X v10.6.4 Snow Leopard or later."+
Your signature say's you are running Mac OS X 10.5.8 Leopard, which would also explain why you are unable to install the Security Update for Snow Leopard.
Maybe you are looking for
-
My iphone is not backing up to icloud even though on itunes i have set it to back up to icloud. whenever i do a cable connection between my iphone and mac at the end of the exercise it indicates the last time the iphone was backed up i.e. "last back:
-
Implications that we could have if we allow Negative Stock in SAP
Hi Gurus. Can I have in details the Implications that we could have if we allow Negative Stock in SAP please ? Thanks Nainar
-
ID CS6v8 -- Blank pages, missing text, slanted cursor, etc.
Having very strange problems with a file. 1. I am getting blank pages where I had completed a layout (yes, I can see elements in Layers and some items reappear if I turn off some items called <group>, but not all. 2. Some pages have missing items. 3.
-
Hi, First pardon my generic question, but I am posting this after much frustration. When you create an index on a table, which thought process you follow? I mean instead of blindly throwing index on every column in where clause, how do you decide as
-
Photos appear small in iphone/blank space on top and bottom
After struggling to duplicate, cut and paste (because iphoto wouldn't just let me copy) 20 pictures into my iphone folder, I synced the phone and first got a bunch of black squares. I didn't panic- just re-synced it and all the pictures appeared. How