Facing an error while mailing from SAP to internet email

Hi friends ,
i found this error in SCOT.
Internal error: SO_OBJECT_MIME_GET Exception: 2
could anyone please help me .
thank you,

for error look at this..
Error configuring Alerts
for sending mail look at this..
Sending Mails to SAP inbox

Similar Messages

Error Sending Mail from SAP

Hi all,
I am facing this error when i try to send a mail from Sap to external address. I have maintained the necessary settings in SCOT, maintained the email address in SU01and SAPconnect is activated in transaction SICF.
No delivery to ..... as recipient unknown
Can anyone help me out...
Thanks

Hello ..
I have followed the Recommendations and everything is going well but now I can only send emails from the same domain (my default domain), but cannot send outside that domain for example hotmail, gmail, yahoo..
The administrator said that: the Exchange server already has registered the IP SAP server to enable him to relay.(but like knowing if it is truth)
But nothing happens, The error is the same: No delivery to ..... as recipient unknown
Here is the error: http://img.photobucket.com/albums/v484/mauzzz/SAP/SO01Erroringles-1.jpg
thanks to all

Depreciation Run Error while Upgrading from SAP 4.6C TO ECC6.0

Hi
We are upgrading from 4.6c to ECC 6.0. In ECC 6.0 we need to make the Number Range Interval as "Internal" and Batch Session tick to be removed from the Depreciation Document Type.
While executing depreciation run, it got terminated and I have done the above changes. After that I have restarted the Depreciation. I have got the following error Message.
Message(s) during check of document ERROR00001
Message no. AAPO511
S:/SAPDMC/LSMW_AUX_020:006 20
Message no. /SAPDMC/LSMW_AUX_020006
If any body aware solution, kindly reply to this message
Thanks
siva

Check this useful links
Key differences between SAP 4.6 - ECC 6.0
http://sap.ittoolbox.com/groups/technical-functional/sap-hr/difference-sap-ecc60-with-sap-r3-3161113
LE/WM functionality difference between 4.6c and ECC 6.0
differences between SAP R/3 ECC 6 & SAP R/3 4.6C in Material management mod
Upgrade from SAP R/3 4.6 C to ECC6.0 - To find obselete and new tcodes
Upgrade from SAP R/3 4.6 C to ECC6.0 - To find obselete and new tcodes

Runtime error while connecting from SAP to MS-SQL DB

Hi,
I am writing a program to send data from SAP to MS SQL DB.
The stored procedure when run alone works fine.
I have defined connection 'C04' in DBCO with correct attributes.
But the 'CONNECT TO C04' statement gives me runtime error DBIF_DSQL2_CONNECTERR saying that 'Connection to Database system with the identifier C04 is not possible;.
First of all, I am not very clear if it is a ABAP problem or BASIS problem.
I did a lot of research but could not find a solution.
Please help me.
Thanks & Regards,
Shubha.

Hi shubha,
1. If your application server
   is unix/aix,
   then connection to MSSQL db
   is not possible.
(Bcos both OS are different,
and the connector is not provided
by sap / not available)
2. After making an entry in DBCON Table,
   probably something may be required to
   be done on the application server,
   by the basis team.
3. If this connection is required
   to be made to oracle server,
   then basis definitely requires
   to make a connection string
   on the application server
   (apart from the dbcon entry)
regards,
amit m.

Sending mails from SAP to Internet

Dear Experts,
Please let me know how to configure SCOT so that i can send mail to Yahoo /Gmail accounts of the User.
Thanks in advance,
Sandeep

My problem is solved

Error while sending mail from SAP

Hello All,
Recently we are facing an error while sending mail from SAP. When we try to compose a message ,it is moving to a dump error RAISE_EXCEPTION.
The details from ST22,
Short text
    Exception condition "FOLDER_NOT_EXIST" raised.
Error analysis
    A RAISE statement in the program "SA
    condition "FOLDER_NOT_EXIST".
    Since the exception was not intercep
    program, processing was terminated.
Kindly suggest..
Thank You,
Regards,
Hasan

Hello Priyanka,
Actually, I performed the following two steps in order to solve the issue:
- In transaction SICF, the node for SAPConnect must be active. In our system, this node was in inactive state. Hence I activated it.
- Then In transaction SCOT-> Settings menu--> default domain should be 'xyz.com' if the email addresses in your company are maintained with a suffix xyz.com.
But for me the problem didnt get solved here..
The problem that i am facing now is that if in my user profile, I have the email address maintained, then i get an error saying 'Sender address rejected'. However, if i goto transaction SU01 and clear the email id, the mail is successfully sent to outer world.
You can try the above mentioned two steps using SICF and SCOT. If the problem does not get solved then try clearing the mail id in ur user profile.
Hope this helps. If you find an answer to the problem of the mail id getting cleared, then please let me know..
Regards,
Himanshu

Error while sending mails from SAP

Hello Experts,
I am facing the below problem:
If an error occurs during the processing of a Z SAP transaction, an email needs to be sent to the user who is executing the transaction.
So, in this case the sender and receiver is the same user.
But the problem that i am facing is that for sending the mail from SAP, i have to maintain the email address in the user profile as blank. If I maintain some email address in the user profile, i encounter the following error:
Internal error: CL_SMTP_RESPONSE ESMTP error code is not known. 554 554 <email address>: Sender address rejected .
Please help me resolve this.
Thanks a lot in advance to answer the above query.
Regards,
Himanshu

Hi Himanshu,
I think its the problem with mail server configured in ur system.
Please contact ur basis Person.Ask him to chk The SCOT tcode once.Maybe ur SMTP configuration is not done properly.Also chk this sap note 455140 - Configuration for e-mail, fax using SMTP
Regards,
Lakshman.

Problem while sending the mail from sap

Hi experts,
                 I am facing some problem while sending mail from sap to external mail.
this is th code i am using but it is not working. plz check and tell me.
REPORT ZMAIL_DEMO.
data: maildata type sodocchgi1.
data: mailtxt type table of solisti1 with header line.
data: mailrec type table of somlrec90 with header line.
start-of-selection.
break-point.
clear: maildata, mailtxt, mailrec.
refresh: mailtxt, mailrec.
maildata-obj_name = 'TEST'.
maildata-obj_descr = 'Test'.
maildata-obj_langu = sy-langu.
mailtxt-line = 'This is a test'.
append mailtxt.
mailrec-receiver = 'SOME MAIL ID'.
mailrec-rec_type = 'U'.
append mailrec.
call function 'SO_NEW_DOCUMENT_SEND_API1'
exporting
document_data = maildata
document_type = 'RAW'
put_in_outbox = 'X'
tables
object_header = mailtxt
object_content = mailtxt
receivers = mailrec
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
if sy-subrc = 0.   "( did not receive any mail) *
write : 'mail sent'.
endif.

Hi,
Please check with the following code.
TABLES: KNA1.
data for send function
DATA DOC_DATA LIKE SODOCCHGI1.
DATA OBJECT_ID LIKE SOODK.
DATA OBJCONT   LIKE SOLI OCCURS 10 WITH HEADER LINE.
DATA RECEIVER LIKE SOMLRECI1 OCCURS 1 WITH HEADER LINE.
SELECT * FROM KNA1 WHERE ANRED LIKE 'C%'.
WRITE:/ KNA1-KUNNR, KNA1-ANRED.
send data internal table
CONCATENATE KNA1-KUNNR KNA1-ANRED
                         INTO OBJCONT-LINE SEPARATED BY SPACE.
APPEND OBJCONT.
ENDSELECT.
insert receiver (sap name)
REFRESH RECEIVER.
CLEAR RECEIVER.
MOVE: 'any_email'_ TO RECEIVER-RECEIVER,                " SY-UNAME
        'X'      TO RECEIVER-EXPRESS,
        'U'      TO RECEIVER-REC_TYPE.
APPEND RECEIVER.
insert mail description
WRITE 'Sending a mail through abap'
                 TO DOC_DATA-OBJ_DESCR.
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
     EXPORTING
          DOCUMENT_DATA              = DOC_DATA
     IMPORTING
          NEW_OBJECT_ID              = OBJECT_ID
     TABLES
          OBJECT_CONTENT             = OBJCONT
          RECEIVERS                  = RECEIVER
     EXCEPTIONS
          TOO_MANY_RECEIVERS         = 1
          DOCUMENT_NOT_SENT          = 2
          DOCUMENT_TYPE_NOT_EXIST    = 3
          OPERATION_NO_AUTHORIZATION = 4
          PARAMETER_ERROR            = 5
          X_ERROR                    = 6
          ENQUEUE_ERROR              = 7
          OTHERS                     = 8.

Error in sending mail from SAP to microsoft outlook

Hi all.
Greetings.
I have a requirement to send mail from SAP to Outlook.
SMTP is configured here....i have checked the steps.
I am using FM "SO_NEW_DOCUMENT_SEND_API1" to send the mail text.
when i check the SOST Tcode i got message "Wait for communications service".
after evry 10 minutes the sap connect all process runs..as it is configured in SCOT transaction, but even after 30 minutes the mail is not sent.
I don't know how should i check the error message?
tell me the checking stepls plz?...how should i step through in checking this?
what are the prerequsites for sending mails from SAP to Microsoft outlook?
regards
Prashant Tiwari
Edited by: prashant tiwari on Feb 6, 2009 10:26 AM

Hi prashant,
Pls refer to the link below:
Re: Inbound Email- SAP Connect
or
check your userid .
If not correct no mail will go from u r id.
Try it with another user id.
or try using the following function module
'SO_NEW_DOCUMENT_ATT_SEND_API1'
I Hope this helps you with the issue.
Thanks
Ravi Aswani

Problem while sending mail from SAP

Hi ABAP gurus,
    I tried to send mail from SAP. For this we configured SMTP Services using the transaction SCOT and all are Completed.
When I send a mail using SAPOffice it is Executing successfully and main is delivered to me.
   When I tried in the program using the function module 'SO_NEW_DOCUMENT_SEND_API1' mail is not delivered to me but it is placed in SAPoffice outbox.The status of the mail says "SEND PROCESS STILL RUNNING". Even when i execute SAPconnect manually mail is not transmitted.
   This is the transaction history of the mail.
Trans. history
18.02.2006 13:44:31 Document sent
             13:44:31 Wait for communications service
After This stage Delivery attempt is not taking place.
This is the Code
****Document DATA
EMAIL_DATA-OBJ_NAME = 'MESSAGE'.
EMAIL_DATA-OBJ_DESCR = SUBJECT.
EMAIL_DATA-OBJ_LANGU = 'E'.
EMAIL_DATA-SENSITIVTY = 'P'.
EMAIL_DATA-OBJ_PRIO = '1'.
EMAIL_DATA-NO_CHANGE = 'X'.
EMAIL_DATA-PRIORITY = '1'.
***Receiver
    EMAIL_SEND-RECEIVER = '[email protected]'.
    EMAIL_SEND-REC_TYPE = 'U'.
    EMAIL_SEND-EXPRESS = 'X'.
    APPEND EMAIL_SEND.
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
     EXPORTING
          DOCUMENT_DATA              = EMAIL_DATA
          DOCUMENT_TYPE              = 'RAW'
          PUT_IN_OUTBOX              = 'X'
    IMPORTING
         SENT_TO_ALL                = SENT
         NEW_OBJECT_ID              = EMAIL_ID
     TABLES
          OBJECT_CONTENT             = EMAIL_TEXT
          RECEIVERS                  = EMAIL_SEND
     EXCEPTIONS
          TOO_MANY_RECEIVERS         = 1
          DOCUMENT_NOT_SENT          = 2
          DOCUMENT_TYPE_NOT_EXIST    = 3
          OPERATION_NO_AUTHORIZATION = 4
          PARAMETER_ERROR            = 5
          X_ERROR                    = 6
          ENQUEUE_ERROR              = 7
          OTHERS                     = 8.
Please Help me to solve this Problem.
Regards,
Viswanath Babu.P.D

Hi viswanath,
1. in scot, in smtp node,
2. press the internet button
3. In ADDRESS AREA,
   type
   *yahoo.com
   *rediffmail.com
etc,etc.
4. Only when such domains are entered,
   will sap send mail.
5. It will not send any mail to other domains.
6. Or simply enter *
regards,
amit m.

Error while extracting from BI source

Hi,
We are facing a wierd problem:
Scenario:
Loading data from one DSO to another DSO with the help of transformation
The DTP fails at second data package each time. First data package goes successfully but it fails at the second data package) We have tried to vary the data package for e.g. 100 records, 5 records etc.....no matter what we do the load fails at the second data package with the following error message.
Error:
Data package processing terminated
Error while extracting from source EPUD0002 (type InfoProvider)
System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE (see long text)
Unknown error in SQL interface
Error reading the data of InfoProvider EPUD0002
Exception CX_RS_STEP_FAILED logged
Workaround:
We tried to increase the number of data package size so that all the records can be processed in only one data package and the load has never to request for 2nd data package . BUT as the data package size is big it takes long time to process and never completes....
FYI...Our transformation has lots of abap coding ...
Addn Info:
SAP_BW 700 0010
BI_CONT 703 0005
SAP_BASIS 700 0010
Any help will be highly appreciated...
- Amit

There must be some bug in the code which is causing this issue.
try to debug it,
refer: /people/community.user/blog/2007/03/29/sap-netweaver-70-bi-extended-capabilities-to-debug-a-data-transfer-process-dtp-request
/people/dirk.herzog/blog/2005/02/11/abap-development-in-sap-bw

E-mail from SAP R/3 to Outlook

Hi,
I am facing issues when attempting to send e-mails from SAP R/3 to Outlook it gives following error. E-mail id of the user id correct but for some reason but I still get these odd error/no message.
There is no resource constraint from SAP R/3 side, I have even seen a case when both the e-mail ids(To & CC) were correct. It failed on CC and TO went successful and visa-versa.
1. When E-mail is erroring out in SOST
Internal error: No Send Order Generated. Error Code:NI_SREQ
Internal error: No Send Order Generated. Error Code:NI_SREQ
Message no. XS829
Diagnosis
An error occurred in program No Send Order Generated. Error Code:NI_SREQ
Error text:
Additional information:
System Response
Message processing terminated.
Procedure
Report the error to the SAP Hotline.
Log :
04/11/2007     10:30:28     Document sent
04/11/2007     10:30:28     Wait for communications service
04/11/2007     10:30:35     Internal error: No Send Order Generated. Error Code:NI_SREQ
04/11/2007     10:30:36     Document deleted from queue
2. When NO STATUS is updated in SAP - SOST.
Recipient Is Valid. Delivery Attempted
Message no. XS718
Diagnosis
The communication system recognized the recipient as valid and will send the message to this recipient, or will generate an appropriate status message if the message cannot be delivered.
System Response
Processing was completed normally.
Additional information on the node used (in the system language of the node, if available):
250 2.1.5 [email protected]
Procedure
No action is necessary.
04/11/2007     11:00:41     Document sent
04/11/2007     11:00:41     Wait for communications service
04/11/2007     11:05:35     Recipient Is Valid. Delivery Attempted
04/11/2007     11:05:35     Document deleted from queue
Appreciate your help in resolving the issue.
Thanks
Nani

Default domain is maintained.
This issue is happening only with few users when they are trying to send a mail through some customized Z t-code.
Recipient ................... Is Valid. Delivery Attempted.
Message XS718.
Pls advice.

Problem in sending mails from SAP

Hi Gurus,
Let me explain the problem what I am facing.
We have configured for sending automatic mails from SAP to lotus when a PO is created. Also mail details for both sender and recipient are maintained.
But when I create/change a PO, I am getting the error message 'route is not found'
(Error code XS826).
Please throw some light on this.
-B S B

When you did the SCOT maintenance..Add the address areas.
To do this..double click on the node for the smtp...in the supported address types group select the internet check box and click the set button...In the popup screen there is a table control for address areas..make the required entries there....
Pls check that you have also set your default domain....It is in the menu option
Settings --> Default Domain...
And also Check the mail status in SAP in transaction SOST . If its not green then it is waiting to be send .
You can start send process by running program RSCONN01 with MODE = 'INT' or trigger it from transaction SCOT .
On production environment the program RSCONN01 is schedued as job to send mails in que at ceratin intervals.
Rgds,
Naren

Error while deleting from BIA index

HI EXPERTS GETTING BELOW ERROR PLZ GIVE CLARITY ON THIS:
1.A communication error occured, with the TREX TcpIp
2.Error while deleting from BIA index; reconstruction required
THANKS &REGARDS,
rAMESH,

Dear Ramesh,
Please check the connection with BIA. Please ask the Basis team to check the BW to BIA connection if they maintain it.
YOu can go to rsddbiamon2 and check BIA connection availibility for more details.
If that is right please try redoing the step at which you faced error and it should help.
Please close the question if you have got the answer or solved it.
Regards,
Den

Error while installing the SAP J2EE add-on for SAP NW XI installation

Error while installing the SAP J2EE add-on for SAP NW XI installation
Posted: Jan 24, 2007 5:23 PM Reply E-mail this post
Hello,
When I am installing the SAP SAP J2EE add-on for SAP NW XI installation I am getting the follwing error:
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: Executable /oracle/XID/920_64/bin/sqlplus returns 127.. SOLUTION: See ora_sql_results.log and the Oracle documentation for details
Could some one help me to resolve this error and install the SAP J2EE add-on?
Thanks,
George

Hi George,
Kindly use the latest installation Masted in Service market place. That will possibly solve your problem.
Regards
Vivek

Facing an error while mailing from SAP to internet email

Similar Messages

Maybe you are looking for