Facing an issue while Bookmarking a report in the query

Hi,
I opened a report in the portal and executed it.
I try to bookmark a page with all my desired factors i want in my query .
and when i bookmark, it diverts me back to an older query that i've created
and all of the links to my previous bookmarks are bringing me back to the same ONE QUERY
i've tried sending my bookmarks to different collegues and when they open it - it leads them to different ones
however when i open them, it leads me back to one same query
the url addresses are different for all these bookmarked queries also
however, they are all diverting me back to the same one.
Please provide me some solution to this issue

Hi
You may have enabled a Payables option that does not permit making adjustment for paid invoices.
Try disabling this profile option in AP.
Dina

Similar Messages

Issue while opening webi reports using OpenDoc url in Chrome browser

Hi
We are in SAP BI4.0 SP7. We are facing weird issue while opening the webi report via OpenDoc url in chrome. we are facing the below issue only in chrome and it works perfectly in IE and Firefox.
For the first time the report gets opened properly(when a session is created). If we try to open the same report from the same machine in a different browser tab, report gets opened up without any Tables\charts. We could see only a blank page with just the Report Tab name at the bottom. If we do refresh on the page, the report opens up correctly. We have checked for packet drops and there is no such thing. Is there any setting that we should make to resolve this. Your help is appreciated.
thanks
Gokul

Hello Gokul,
first thing is to check is if your chrome version is supported by your current BO version as specified in the PAM (is it?). If the chrome version is supported, and you still have an issue, then you can check with a sap support engineer.
best regards,
Victor

I'm facing performance issue while accessing the PLAF Table

Dar all,
I'm facing performance issue while accessing the PLAF Table.
The START-OF-SELECTION of the report starts with the following select query.
    SELECT plnum pwwrk matnr gsmng psttr FROM plaf
    INTO CORRESPONDING FIELDS OF TABLE it_tab
    WHERE matnr IN s_matnr
      AND pwwrk = p_pwwrk
      AND psttr IN s_psttr
      AND auffx = 'X'
      AND paart = 'LA' .
While executing the report in the Quality system it does not face any performance issue...
When it comes to Production System the above said select query itself it is taking 15 - 20 minutes time to move further.
Kindly help me to over come this problem...
Regards,
Jessi

Hi,
"Just implement its primary Key
WHERE PLNUM BETWEEN '0000000001' AND '9999999999' " By this you are implementing the Primary Key
This statement has nothing to do with performance, because system is not able to use primary key or uses every row.
Jessica, your query uses secondary index created by SAP:
1     (Material, plant) which uses fields MANDT MATNR and PLWRK.
but it is not suitable in your case.
You can consider adding new one, which would containt all fields: MANDT, MATNR, PWWRK, PSTTR AUFFX PAART
or - but it depends on number of rows meeting and not meeting (auffx = 'X' AND paart = 'LA' ) condition.
It could speed the performance, if you would create secondary index based on fields MANDT, MATNR, PWWRK, PSTTR
and do like Ramchander suggested: remove AUFFX and PAART from index and where section, and remove these unwanted rows
after the query using DELETE statement.
Regards,
Przemysław
Please check how many rows in production system

TS3700 I am facing this issues that music stops playing when the display goes...Please help me with this...:)

I am facing this issues that music stops playing when the display goes...Please help me with this...:)

Did you see the article linked at the top of this page?
iPod nano (6th generation): Music stops when display turns off
B-rock

Save Query - An error occurred while creating connection strings for the query

A workbook trying to edit and reload I get the following error "Save Query - An error occurred while creating connection strings for the query" No Power Pivot data model or anything.

I am getting the same error when editing a Power Query in an Excel spreadsheet. It happens when I change a Group By step to do a Sum instead of Count Rows.

How to Export/Import "report for the query" to another company

Hello,
I do this:
1.create query in SQL analizer
2.copy paste into SBO query generator and save
3.create report for the query
Then, How to Export/Import "report for the query" to another company ?
Thanks for your HELP.

Look for SAP Note number 600813
That's the note Adele means, I guess.
<b>Edit (@13:18)</b>
The direct link:
https://websmp101.sap-ag.de/~sapidb/012006153200000183292003E.ITF
---- Replace *SOURCE* with the source database name.
---- Replace *DEST* with the destination database name.
insert into [*DEST*].[dbo].[RDOC]
select [*SOURCE*].[dbo].[RDOC].*
from
[*SOURCE*].[dbo].[RDOC],[*DEST*].[dbo].[cinf],[*SOURCE*].[dbo].[cinf]
where [*DEST*].[dbo].[cinf].[lawsset]=[*SOURCE*].[dbo].[cinf].[lawsset]and [*DEST*].[dbo].[cinf].[version]=[*SOURCE*].[dbo].[cinf].[version] and [*SOURCE*].[dbo].[RDOC].[Doccode]NOT IN (SELECT Doccode from [*DEST*].[dbo].[RDOC])
insert into [*DEST*].[dbo].[RITM]
select [*SOURCE*].[dbo].[RITM].*
from [*SOURCE*].[dbo].[RITM],[*DEST*].[dbo].[cinf],[*SOURCE*].[dbo].[cinf] where [*SOURCE*].[dbo].[RITM].[Doccode] NOT IN (select Doccode from [*DEST*].[dbo].[RITM])AND [*SOURCE*].[dbo].[RITM].[Doccode]IN (SELECT Doccode from [*DEST*].[dbo].[RDOC])
Hope it helps...
Grtz, Rowdy

Authorization Issue while running a report

Hi Experts,
We are facing strange issue in authorizations while runnung a report. When we givel '*' company code access to the users they are able to run the report. When we give one single company code specific access to the users they get error message : No Authorization or everything filtered Out".
Please let me know how can i debug the same.
Company code specific access along with sales grp, profit ctr, sales employee are maintained in a ODS in BW.
Thanks
Gaurav

Hi,
When you use authorization relevant char in your report, you should create a variable of type authorization.
The variable input may be mandatory or optional.
By doing this, the default values will pop-up in the variable input screen when the user tries to execute the report.. It is also relevant to mention that the user cannot enter any blank values for the authorization variables unless he/she got * access for that particular character.
Also do not hardcode any values for authorization relevant char inthe report.
It will throw error No Authorization.
Guru.

Facing problem while creating a report on the value of a UDM in oem gc

Hi,
I have created a report in OEM grid control. I have selected a host for this. And I have selected an UDM from the metric list. The report works fine shows the correct graph in the report.
The problem is that along with the value from the respective udm , I am also getting the values from other metrics.
Between, I also noticed that the metric I selected is not highlighted when visited next time to the report edit page. I guess this could be the cause but dont know how to fix it. May be I am wrong, If any other issues or suggestions to my problem , Please Advise.
Thanks in advance.

It is 10.2.0.5. I guess it is a bug but where to check for confirmation.
Thanks.
Edited by: Kuldip on Jul 22, 2010 11:15 PM

Issue while opening SSRS Report with Oracle as Datasource in Report Manager

I deployed SSRS report in Report Manager but I am unable to generate that report. Am getting following error.
Is it problem with datasource in report manager? I am not able to change the Data source type to Oracle. It is showing Microsoft SQL Server. How can I change it, no other options are coming except Microsoft SQL Server. Please help.
An
error has occurred during report processing. (rsProcessingAborted)
Cannot
create a connection to data source 'TEST_DS'. (rsErrorOpeningConnection)
For
more information about this error navigate to the report server on the local
server machine, or enable remote errors

When I deploy them in localhost, and try to run report in report manager, it is not showing any data source type in drop down list except MS SQL Server. I do not know why it is showing in BIDS and not in report manager!!!
Hello,
Based on my test, I can specify the data source type as Oracle after deploy the report to Report Manager and open the report Data source propertity page. If the report use the shared data source, you should check the specify data source at the Data Source
folder. Please refer to the following screen shot:
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Issue while adding BW reports to role menu

Hi All,
Today, I was trying to assign a list of BW reports to a partcular role in our project. As i started assigning the reports from menu
tab in PFCG, I observed that all the reports are getting stored with same name "RRMX - Business Warehouse report "
I also observed that all the reports have only one auth obj S_TCODE, when I checked in auth tab.
As, Iam new to BW security, I need guidance here.
->Is it normal for all the reports to get saved with same name in role menu?
->Also, I need to confirm if the reports given to me are already created and active reports, How can i check it?
->Also suggest me the proper way to assign reports to the role.
Regards,
Brahmeshwar.

> ->Is it normal for all the reports to get saved with same name in role menu?
Unfortunately these BW-reports are all started by t-code RRMX. PFCG does not know what is behind RRMX. The t-code in PFCG is always 'RRMX'
> ->Also, I need to confirm if the reports given to me are already created and active reports, How can i check it?
hmmm,.... maybe execute them?
> ->Also suggest me the proper way to assign reports to the role.
well normally simply press the 'add report' button on the menu tab of pfcg, then select as per your choice.
BW-REports (RRMX) are a bit different....
There is a note from BW giving some information for BW-admins who have to work on backend and maintain roles....
note # 316470
b.rgds,
Bernhard

Getting 404 not found error-while creating classic report - after sql query

my work space - upgrade
while iam trying to develop a page today in work space - under classic report - after i provided the query and when pressed next to go to report attribuites section - iam facing 404 not found issue.,
this is happening just today.
and all teh other pages are working fine - do not know what ios the issue - can anybody help me here please..
query used for classic report
select DISTINCT cust.customer,prod.ebs_team
from
CUSTOMER_11i@upgrade Cust
,BUG_PRODUCTS@upgrade PROD
where 1=1
and cust.product_id = prod.product_id
and prod.prodline = 'EBS'
and IS_CUST_11 = 'YES'
and NVL(IS_CUST_121,'NO') = 'NO'
and NVL(IS_CUST_12,'NO') = 'NO'
order by 1;
with regards
Shiva Prasad.k
Edited by: user759720 on Feb 14, 2012 5:00 AM

Hi Shiva,
to diagnose a 404 error please have a look at http://www.inside-oracle-apex.com/oracle-apex-got-404-not-found-2/
This should give you sufficient information to find out what is actually failing.
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

Displaying report in .pdf format while Running oracle reports over the web

I am running a report over the web via IE. I am suing .pdf
format as the file type. The problem I am facing is that the
report comes out with a blank in acrobat reader if there are
just one or two records - i.e less thatn one pagefull. THe
reports displays output only when there ar more than one
pagefull of records.
Any explanation for this bezarre behavior and any suggestions?
I will very much appreciate your help.
Regards
Prasad.

in R12 I found 2 choice
1) when submitting requests (if available) you can set the output format by using the Options button (upon sompletion section):
layout --> format --> select format you need (RTF/HTML/EXCEL/PDF)
2) in the request form (view->request) selecr the report you want to reprint in the Tools menu select print/republish, in the html page that pop up select output format you want, number of copies =1 submit
www2p

I am frequently experiencing Iphone 5 camera issues, while taking photos all of the sudden the camera going to hang mode

Hi,
Greetings !!!
I would like to know what is the root cause of Iphone camera hanging ?
I am very frequently experiencing Iphone 5 camera issues like while taking photos all of the sudden the camera going to hang mode with full of pink & black line.
I noticed while camera app turns ON the phone going to hand.
I went to apple services server with this problem & they said they didn't see any errors.
Kindly response with my request, and provide me the solution.
Thannks & regards,
-Vamsi

That often happens with cameras when you take pictures of a computer screen. LCD screens "flicker" and the camera will often catch the flicker.

Issues while joining two tables as the joining column has duplicate values - Please help!

Hi,
I have a table A -which has few columns including a Amount column - I am joining this table A to Table B. The joining column in B has duplicates. So, the number of records are getting more after the joining. As per the requirment when I create a table
after joining the tables and count the salary clumn, there is a difference in the counting. How can I solve this? Can you please help me?
Here is the DDL and sample values
create table #student (sid int, name varchar(10),salary int)
create table [#address] (sid int, city varchar(10),grade char(1),lineneumber int)
insert into #student values (1,'sachin',8000)
insert into #student values (2,'Dhoni',2000)
insert into #student values (3,'Ganguly',7000)
insert into #student values (4,'Kohli',1000)
insert into [#address] values(1,'mumbai','A',1)
insert into [#address] values(1,'mumbai','B',2)
insert into [#address] values(1,'mumbai','C',3)
insert into [#address] values(1,'mumbai','D',4)
insert into [#address] values(2,'JARKHAND','D',3)
insert into [#address] values(2,'JARKHAND','D',4)
SELECT S.SID,NAME,salary,CITY ,grade,linenumber
into #FINAL
FROM #STUDENT S
LEFT JOIN #ADDRESS A
ON S.SID=A.SID
SELECT SUM(salary) FROM #FINAL
--44000
Final result should be 18000 , but it is coming as 44000. can you please help me to get the correct result - what do i do in the joining?
In my real project, i have 5 tables joining, each table have more than 30 columns and few joining tables joining column have duplicates. I have simplified the issue so that i can ask the question clearly. So,while answering, please consider that also in mind.
thanks in advance for your help!

SELECT S.SID,NAME,salary,CITY
into #FINAL
FROM #STUDENT S
LEFT JOIN (SELECT DISTINCT sid,city
FROM #Address) A
ON S.SID=A.SIDthis will do a join on student table and city table with unique sid and city name so adddress selection will be sid city1 mumbai2 jarkand

TimeOut error while running a report on the report server

Hi,
One of my report is taking 30 minutes to generate the output. It works fine when I run it locally, but when I run it on report server I encounter the following error message. Its a timeout error. Any solution other than tuning the query, please.
500 Internal Server Error
org.omg.CORBA.OBJECT_NOT_EXIST: minor code: 0 completed: No
     at java.lang.Class.newInstance0(Native Method)
     at java.lang.Class.newInstance(Class.java:237)
     at com.inprise.vbroker.orb.SE.read(SE.java:28)
     at com.inprise.vbroker.orb.DelegateImpl.handleReply(DelegateImpl.java:711)
     at com.inprise.vbroker.orb.DelegateImpl.invoke(DelegateImpl.java:606)
     at org.omg.CORBA.portable.ObjectImpl._invoke(ObjectImpl.java:459)
     at oracle.reports.server._ConnectionStub.getMainFile(_ConnectionStub.java:1283)
     at oracle.reports.client.ReportRunner.getMainFile(ReportRunner.java:488)
     at oracle.reports.rwclient.RWReportRunner.getMainFile(RWReportRunner.java:121)
     at oracle.reports.rwclient.RWReportRunner.getMainFile(RWReportRunner.java:95)
     at oracle.reports.rwclient.RWClient.runReport(RWClient.java:1322)
     at oracle.reports.rwclient.RWClient.processRequest(RWClient.java:1139)
     at oracle.reports.rwclient.RWClient.doPost(RWClient.java:328)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:283)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].util.ThreadPoolThread.run(ThreadPoolThread.java:64)

Hi Bhasker
Try setting idleTimeOut under connection element in server configuration file to a large value.
Regards
Sripathy

Facing an issue while Bookmarking a report in the query

Similar Messages

Maybe you are looking for