Facing error when activating ODS

Hi All,
i am facing error when activating ODS. THe load was succesfull. when i checked in RSMO detail screen all the data packets are green but under subsequent processing it shows following error message
1.Activation of data records from ODS object ZOPA_8 terminated
2.Error when assigning SID: Action VAL_SID_CONVERT table 0MATERIAL
3.Error getting SID for ODS object ZOPA_8
"And under others also it is showing same message.
Can any one please suggest how to solve this issue. Its very urgent.
Waiting for appropriate solution...
thanks
kamal

Hi,
Check the following.
1. 0MATERIAL might be the reference char for ZOPA_8.
2. If so, then need to check conversion routines are same for both.
3. Then check the data (In PSA) under ZOPA_8 and check if it has any special chars or failing due to conversion routine.
4. Correct data and load it again.
Hope it works.
Regards,
Aditya

Similar Messages

Errors when activating ODS

Hello,
i am trying to activate freshly installed ODS from business content.
it gives following errors:
RFC connection to source system BWDCLNT210 is damaged ==> no Metadata upload
Error when creating the export DataSource and dependent Objects
Please suggest...
regards,

hi Aby,
try if right click source system BWDCLNT210 'restore'
check threads
RFC connection to source system Damaged
check oss note 597326 - Activating ODS: Error when creating the export DataSource
Symptom
When you activate or transport ODS objects, the following errors appear in the log:
"The creation of the export DataSource failed". Message number RSBM 035
"Error &1 in function module &2". Message number RSBM 006
"Error when creating the export DataSource and dependent Objects". Message number RSDODSO 169
"Error when activating the ODS object &1". Message number RSDODSO 168
Other terms
RSBM 035, RSBM 006, RSDODSO 169, RSDODSO 168
Reason and Prerequisites
A characteristic involved is active but it is using new or inactive attributes.
Characteristics involved are all characteristics used in the ODS object.
Solution
Check all characteristics involved as described in the following:
Check the Compounding and Attributes tabs in the characteristics maintenance.
All characteristics here must be active. This is displayed by a green icon.
If this is not the case for a characteristic involved (a gray icon is displayed on one of the two tabs), activate the characteristic involved. This also activates the inactive dependent characteristics.
After you have checked and repaired all the characteristics involved as described above, the loading/maintenance of master data should work again.
help.

Error when activating ODS

Hi,
I am getting an error - Error during confirmation of process 000001
Message no. RSODSO_TOOLS087 when activating a ODS in the process chain.
The error also says - Activation of M records from DataStore object ZDISTSEC terminated
Message no. RSM1102
Can anyone help....
Thanks in advance,

Hi Romina,
have you run the report that comes with this note?
No. 4) in the above mentioned note refers to not-write-optimized ODSs, but only if the database-system is ORACLE. It says if you have to do repartitioning in MSSQL, you'd have to post an OSS request.
I'm actually having the same poblem, but with Oracle as the DB-system. I'm still experimenting with this note.
~ Barbara

Error in activating ODS--Most Urgent

Hi Experts,
I am facing error when activating ODS. THe load was succesfull and activation failed. when i checked in RSMO detail screen all the data packets are green but under subsequent processing it shows following error message
"Error when assigning SID: Action VAL_SID_CONVERT table 0WS_VALUE"
"Error getting SID for ODS object"
"Activation of data records from ODS object 0WS_O01 terminated "
"Value ' 4 5 6 7 8 9 ' (hex. '20002000090034002000200009002000200020000900350020') o "
And under others also it is showing same message.
Can any one please suggest how to solve this issue. Its very urgent.
Waiting for appropriate solution...

Hi,
The string you provided contains multiple TAB symbol (' 0900' ). They are not acceptable by ODS. You need to remove or replace them.
Here
Re: Removing the carriage return / Tab during data extraction
you can see some code examples on how to do it.
Though, as I can see your system is on UNICOD - you'll need to make some adjustment to the code you'll choose.
Best regards,
Eugene

Error while activating ods

Hi all,
i have the following errors turning up while activating ods.
1. creation of export data source failed
2. rfc connection to source system b3tclnt800 is damaged - no meta data upload
3. error when activating ods object
Can anyone let me know how to rectify it.
regds
hari

Hi,
The problem is with ur Source Sys connection..
Above problems will be solved by restoring Source System Connection... Ask your Basis team to restore SS.
Thanks

Error While Activating ODS in BW

Hai Experts
While Activating the ODS the following errors are occurs
The creation of the export DataSource failed
RFC connection to source system B3TCLNT800 is damaged ==> no Metadata upload
Error when creating the export DataSource and dependent Objects
I am using IDES BW 3.1C.
Kindly suggest me a solution.
Balaji VK
09342501065
Error when activating ODS Object SALEODS

hi,
also take a look this
Re: "RFC connection to source system [our R3 TEST system] is damaged ==> no Met

Error while activating ODS Object (urgent)

Hi Gurus,
I am getting an error while activating ods object.
Error/warning in dict. activator, detailed log --> Detail.
Row type /BIC/AGLCATODS00 is not active or does not exist.
Table type /BIC/WAGLCATODS00 could not be activated.
Table /BIC/AGLCATODS50 could not be activated.
Table is not yet classified.
Return code..............: 8.
DDIC Object TABL /BIC/AGLCATODS00 has not been activated.
Error when activating ODS Object GLCATODS.
If any one have come across this issue please help me out in resolving this issue.
I will reward points.
Urs,
Raki.

Hi venkat,
There are only 3 info objects which i have created it and activated, only those i am pulling in the new ods but its throwing the same error what ever i do changes.
Is this issue is related to any authorization concerned?
Urs,
Raki.

Error while activating ODS Object (BIC/WAGLCATODS00 &/BIC/AGLCATODS00 )

Hi Gurus,
I am getting an error while activating ods object.
Error/warning in dict. activator, detailed log --> Detail.
Row type /BIC/AGLCATODS00 is not active or does not exist.
Table type /BIC/WAGLCATODS00 could not be activated.
Table /BIC/AGLCATODS50 could not be activated.
Table is not yet classified.
Return code..............: 8.
DDIC Object TABL /BIC/AGLCATODS00 has not been activated.
Error when activating ODS Object GLCATODS.
If any one have come across this issue please help me out in resolving this issue.
I will reward points.
Urs,
Raki.

Frank,
There is lot of free space in data base table i already checked it before.... in sm21 it showing database errors.
Strange i m unable to find out the solution.
Urs,
Raki.

Error when transporting ODS Object

Hi All,
I got the following error when transporting ODS object.
"The creation of the export DataSource failed"
"RFC connection to source system QB1CLNT100 is damaged ==> no Metadata upload"
"Error when creating the export DataSource and dependent Objects. Error when activating ODS Object 0FIGL_O10"
Maybe somebody can help me.
Thanks a lot and appreciate that,
-Martin-

hi Martin,
check oss note 597326 - Activating ODS: Error when creating the export DataSource
Symptom
When you activate or transport ODS objects, the following errors appear in the log:
"The creation of the export DataSource failed". Message number RSBM 035
"Error &1 in function module &2". Message number RSBM 006
"<b>Error when creating the export DataSource and dependent Objects</b>". Message number RSDODSO 169
"Error when activating the ODS object &1". Message number RSDODSO 168
Other terms
RSBM 035, RSBM 006, RSDODSO 169, RSDODSO 168
Reason and Prerequisites
A characteristic involved is active but it is using new or inactive attributes.
Characteristics involved are all characteristics used in the ODS object.
Solution
Check all characteristics involved as described in the following:
Check the Compounding and Attributes tabs in the characteristics maintenance.
All characteristics here must be active. This is displayed by a green icon.
If this is not the case for a characteristic involved (a gray icon is displayed on one of the two tabs), activate the characteristic involved. This also activates the inactive dependent characteristics.
After you have checked and repaired all the characteristics involved as described above, the loading/maintenance of master data should work again.

"Error when activating update rule" after changing ODS key

Hi Gurus,
I have problem when transporting in productive system an existing ODS & the update rule linked. The message is : "Error when activating update rule".
This is when i move one field from the key to a simple field of the ODS.
Before transporting requests, i deleted data in the ODS by right-click on ODS --> Request tab --> select the request --> click on delete....
I don't understand because i did the same in Qual environment and everything is OK : transport request & ODS loading...
Please help.....

Hello,
Please try to check/perform the following steps:
1- You must ensure for the update rule have mapping between infosources
   and ODS/CUBEs correct, this means that also these objects need
   to be of the same version in the source system of the transport as in
   target system.
2- Please ensure all infoobjects in the cube are active.Please
   reactivate all the objects again in source system.
3- Ensure all infoobjects are found in the communication structure.
4- Please try to collect the update rule via BW transport connection
   with the grouping option "only necessary objects" and then transport
   those objects again.
Could you please reactivate the infocube and its update rules again
and then create a new transport for this infocube and transport it
again.
Best regards,
Paula Csete

Error when activating update rule after transporting to QA

Hi,
When we transport Info cubes and update rules along with Process chains. There are the following errors in Transport request(XXXXXXXX).
1. Error when activating update rule 22HSFD3ZMALU46LS0R8PRF2MW
IC=ZSDPCXY2 IS=2LIS_11_VAITM error when checking the update rules
2. Error when activating update rule 7NT4WIDPDCN2ERFDRXIGH95PM
IC=ZSDPCXY2 IS=2LIS_12_VCHDR error when checking the update rules
and etc.
Then we activated and saved all the erroneous update rules in another tranport request(YYYYYYYY) and again we transported alongwith the previous transport request(XXXXXXXX).
The last request(YYYYYYYY)was successfully tranported and still there are same errors in TR(XXXXXXXX).
Quick answers will be highly appreciated.
Regards,
Vijay

Hi Vijay,
Next time you would have transport only (YYYYYYYY). Transport Request (XXXXXXX) was not required to be moved.
Normally Update Rule gets deactivated in QA when any changes to the CUbe/ODS are moved.
Thus either you can transport transport request for only active update rule to QA or activate your UR directly in QA system in case you have authorization to do that.
Regards,
Rohini

0FIA_DS11:Error when activating DataStore Object

Hi,
We have activated the datasources related FI_AA and replicated in to a new BI 7 system.
Currently we are able to activate the asset accounting related targets like 0FIAA_C11, 0FIAA_c12 and 0FIAA_C13
however not able to activate DSO's 0FI_DS11, 0FI_DS12 and 0FI_DS13.
We have replicated the datasources 0FI_AA_11 and 0FI_AA_12 in 3.x but while installing the DSO 0FI_DS11 and 0FI_DS12, facing below given error.
" DataSource 80FIA_DS11 does not exist in source system BIDCLNT600 of version A
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object 0FIA_DS11 "
We have checked the mysource system settings and activated the Data Marts respectively but still we are not able to activate.
System is BI 7 with EHP4 ehanced packege.
Please suggest.
Thanks & Regards,
SMS

Hi Jonas,
I understand the procedures and had followed all the procedures.
We had resolved the issue and issue was with the IP in sm59.
It is cleared.
Thanks for the reply.
Regards,
S M S

Error when activating DataStore Object

Hello,
We have an ODS object which is in avtive stage in ECC DEV system. When
we transport it to ECC QA system it can not be activated and shows
follwoing errors :
1) Internal error occurred when writing
Message no. D0054
2) Error while saving change log for DataStore object DSO_PL
Message no. RSDODSO196
3) Error during creation of DDIC sources of DataStore Object DSO_PL
Message no. RSO435
4) Error when activating DataStore Object DSO_PL
Message no. RSO404
We also observe that even we create new ODS object in ECC QA system,
still it give the same errors while activating.
Note - ECC QA is a system copy of ECC PROD.
Please suggest.

Hi,
I believe the problem is with the Myself connection (the BW source system connection to itself) in the QA system.
Please goto RSA1, 'source systems', right click on the myself system and click on 'check', if there are errors you
maybe able to correct them by right clicking on the myself connection and click on 'restore'. If there are no
errors for the myself connection you should go to sm59 and do the connection and authorization test for the
RFC connection for the myself connection.
Best Regards,
Des.

Error when activating DTP for InfoCube

Hi
I encountered an error '**** Error from PSA ****' 'Error when activating Data Transfer Process DTP_436DF8XYKE2Y97CUX9W7FM0JH' while trying to activate the DTP for an infocube. Does anyone know why this happens and how to fix it ?
I'm on support pack 9 at this moment.
Many thanks,
Anthony

Hi Gnana
Thanks for your reply. Yes, I had already created the transformation for the bespoke cube, checked, saved and activated it without any error. Next, I created the DTP for this cube. Checked it and there wasn't any error. However when I activated it, I received that error message. I didn't get this error when I activated DTP for DSO and master data infoobject.
I have deleted and created the DTP like 5-6 times and still faced the same error message.
Prior to applying support pack 9, I didn't get this error message. Now that I did and also applied the collective OSS note 978148 (BI in SAP NetWeaver 2004s: OSS notes after SPS9), I received this error message.
Regards,
Anthony

Error when activating DTP in

hi guys
I am trying load one ods to another ods . and when I create DTP and try to activate it throwing some weird message like
Creation of PSA /BIC/B0003852 failed
Error during creation of DDIC sources of Data Transfer Process DTP_4B6GPTZCLXHMKF405417M6KEX
Error when activating Data Transfer Process DTP_4B6GPTZCLXHMKF405417M6KEX
I donu2019t know what is this Causing error ..my source dso is correct has data ..but unable activate this ..
Any clue ?

Hi,
I think you have to create export datasource for the first DSO and then check creating the DTP.
Hope this helps..........
Rgs,
Ravikanth.

Facing error when activating ODS

Similar Messages

Maybe you are looking for