Facing error while invoice creation in AR.

Facing error while invoice creation in AR as Please complete your tax accounting flexfield. We are creating invoice through API.
Regards
Sridhar

Hi,
Please go through the below Note ID.
Autoinvoice Error On Tax Codes - Please Complete Your Tax Accounting Flexfield [ID 1469285.1]
Regards,
Raju.

Similar Messages

  • Error while invoice creation through VF01

    Hey while saving a invoice through VF01....... following  syntax error is coming:
    The disctinary structure or table k9rprd6000003 is either not active or does not exist. Request to help me to solve the problem

    Hi
    Kindly check in the program RV60AFZZ that you have written some code by taking the data form table which is not exist
    If you can give me the correct error message no. help you more
    Regards
    Damu

  • I am facing error while running Quickpay in Fusion payroll that "The input value Periodicity is missing for element type KGOC_Unpaid_Absence_Amount. Enter a valid input value". Any idea?

    I am facing error while running Quickpay in Fusion payroll that "The input value Periodicity is missing for element type KGOC_Unpaid_Absence_Amount. Enter a valid input value". Any idea?

    This is most probably because the Periodicity input value has been configured as "Required" and no value has been input for it.
    Please enter a value and try to re-run Quick Pay.

  • We are facing error while executing Bex report.

    Hi Gurus:
    We are facing error while executing Bex report.
    Messge :                                                                          
    u201CQuery 0: Runtime error program state check for conversation 05284411 / CP  with parallel processing via RFC
    Message no. DBMAN428u201D
    The query is based upon Multiprovider (based upon 2 basic cubes).
    Both cubes are partitioned by   info object 0CALMONTH, (valid range - 01.2005 - 012.2010).
    Those cubes are not containing any non-cumulative key figures and Service package level for  SAP NetWeaver BI 7.0 is  u2018SAPKW70012u2019.
    I have checked those cubes in RSRV and carry out following steps:
    "All Elementary Tests -> Transaction Data" and execute the repair "Consistency of the Time Dimension for an Info Cube"
    I have found system inconsistency like u201CRecord with the DIMID 2 contains non-fitting time characteristics u201C
    Detail ERROR:
    Record with the DIMID 2 contains non-fitting time characteristics
    Message no. RSCV053Diagnosis
    The data record of the time dimension table with the described DIMID contains values for time characteristics that do not fit together.
    I have found the u2018 Note 1130450 - Query displays error DBMAN 284; RSRV: Time dimension checku2019  for this but still not sure this will work or not .
    I tested this in dev server , didn't feel useful.
    Could you please let us know what to correct this error.
    Anwser will be rewared.
    Regards,

    >
    Surendra Pande wrote:
    > Anwser will be rewared.
    > Regards,
    Go read the RULES of these forums.

  • Error while delivery creation

    hi,
      i am getting an error while delivery creation for qty 2.The error is "Only 0 EA of material xxxx available".
    The schedule line cat in this case is cp and avalibility check is carried out and confirmed qty is given on some date ahead.
    User then runs the MRP and PR is created .
    Then the user creates a PO but not with ref to the PR created from above,instead the user creates a SO assigned PO and then creates GR which is SO assigned.
    Now when the user is trying to create delivery the erroe is "Only 0 EA of material xxxx available".
    Pl tell me why am i getting this error inspite of having the qty against the SO?
    Is it because a PR is generated from the MRP run for tht order and we have no GR agaist tht PR?Where do u i check this setting

    Hi,
    In SAP there is no stock available for that material. That is the reason it is showing that message..
    Please check MMBE t.code  stock overview for that material. I  think sales order scheduleline date is showing some other date.becuase today there is no stock so u will be not able to create any delvery. So please create delivery only on confirmed schdulines date....
    Other wise do stock posting and then do availability check then try to create delivery...
    Regards
    sankar
    Edited by: sankar sankar on Jul 1, 2008 1:10 PM

  • Facing error while running ldapmodify

    Hello Gurus,
    I am facing error while running ldapmodify.
    Here is my port details from ldap.ora:-
    ===================
    # ldap.ora Network Configuration File: /widmmt/orasoft1/product/10.1.4/ldap/admin/ldap.ora
    # Generated by Oracle configuration tools.
    DIRECTORY_SERVERS= (eqsp3login.qantas.com.au::33014)
    DEFAULT_ADMIN_CONTEXT = ""
    DIRECTORY_SERVER_TYPE = OID
    ===============
    opmnctl status:-
    ==============
    widmmt@eqlpar047:/widmmt/orasoft1/product/10.1.4/ldap/admin> opmnctl status -l
    Processes in Instance: WIDMMT01.eqlpar047.qantas.com.au
    -------------------+--------------------+---------+----------+------------+----------+-----------+------
    ias-component      | process-type       |     pid | status   |        uid |  memused |    uptime | ports
    -------------------+--------------------+---------+----------+------------+----------+-----------+------
    HTTP_Server        | HTTP_Server        | 1581136 | Alive    |   99287176 |    25548 | 346:40:16 | http1:33000,http2:7200
    LogLoader          | logloaderd         |     N/A | Down     |        N/A |      N/A |       N/A | N/A
    dcm-daemon         | dcm-daemon         |     N/A | Down     |        N/A |      N/A |       N/A | N/A
    DSA                | DSA                |     N/A | Down     |        N/A |      N/A |       N/A | N/A
    OC4J               | OC4J_SECURITY      | 1810650 | Alive    | 2049507462 |    88688 | 346:40:14 | ajp:12501,rmi:12401,jms:12601
    OC4J               | OC4J_QFEQSSO       | 1921124 | Alive    |   99287177 |    56284 | 346:40:14 | ajp:12502,rmi:12402,jms:12602
    OID                | OID                | 1695982 | Alive    |   99287178 |    25252 | 346:40:23 | N/A
    =========================
    Please advice asa why I am getting error while running ldapmodify.
    Thanks-
    Pokhraj Das

    Hello gurus,
    When I am running the ldapmodify, it is getting at hang state.
    Actually the problem is the user [portaleqs] by using which I am logging to oiddas, is locked.
    Now I want to unlock the user by firing the below entry:-
    ==========
    ldapmodify -p 33014 -h <hostname> -D cn=orcladmin -w XXXX -v <<EOF
    dn: cn=portaleqs,cn=users,dc=xx,dc=xxxx,dc=com,dc=xx
    changetype: modify
    add: orclpwdaccountunlock
    orclpwdaccountunlock: 1
    EOF
    ===========
    Please suggest..
    Thanks-
    Pokhraj Das

  • Internal Error -2038 Invoice Creation

    ¡Hi! Help!
    I explain my problem
    I've created a vb.net 2005 application. Through DI API (SBO 2005 SP 01, patch level 20).
    This application, windows forms run, it opens an SBO conection and  starts a timer. Every 5 secconds the timer ticks, it
    searches for custom xml files containing info needed to create/update Invoices, or Sales Orders. Whenever I find files to
    process, the timer stops, documents are processed one after another and then timer continue ticking. I use one Company and
    one conection open since the moment the program starts and it remains opened the whole day.
    There are two servers. SAP Server, and there's another server (in this server runs my application, here I have just my app
    and DI API so it connects to SAP Server) both on same Domain.
    Database size is 50 GB, and it grows about 90 - 100 MB every day
    The amount of invoices created is about 500/600 daily.
    Problem is many times invoices creation are unsuccesfull due to one of the following errors:
    OINV.Series , 'Internal error (-2038) occurred'  or just OINV.Series , 'Internal error (-2038) occurred'
    this makes more difficult to figure out the reason why this happen and moreover how to solve it, because as some or many of
    you may know, internal error is not much explict and the causes for this error are very different.
    Now, I'm certain Invoice series are OK because the same Invoice creation that fails in one moment, simply is succesfully
    created after 2, 3 or even 5 or 6 tries!.
    Errors increase a lot at evening, when intensive use of SBO database is taking place. However these errors use to happen
    even  at morning when few Invoices are created, I mean, not necessarily happen at intensive use.
    Invoices are not that large. The biggest are about 10 - 12 lines.
    This situation is frustrating both for my customer and myself
    Has anyone experienced something similar? is this something about sbo db performance? does anyone knows if there's some kind
    of document about Internal error?

    Hi Marcel,
    I think the first thing I'd check is for deadlocks on the database. Earlier patches of SBO 2005A SP1 are known to have issues in this area (see SAP note 1113543 for an example). It would certainly fit the symptoms you are getting (ie the same document can be created without errors at a different time).
    Kind Regards,
    Owen

  • Facing Error while installation of netweaver 7.02 on win2k3

    Hi Guys,
    I m facing error during installation on my win2k3 server machine, please help on this , error and log is below.
    An error occurred while processing option SAP NetWeaver 7.0 including Enhancement Package 2 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step :Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.). You can now:
    Choose Retry to repeat the current step.
    Choose View Log to get more information about the error.
    Stop the option and continue with it later.
    Log files are written to C:\Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/.
    TRACE 
    2014-06-19 05:58:38.992 [iaxxclib.cpp:188]
    CLib::load()
    Opened sylib721.dll
    TRACE 
    2014-06-19 05:58:38.992
    exe dir is C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\sapinst_exe.1176.1403175501
    TRACE 
    2014-06-19 05:58:39.480
    MessageLib initialized successfully.
    INFO  
    2014-06-19 05:58:39.492 [synxcpath.cpp:815]
    CSyPath::createFile() lib=syslib module=syslib
    Creating file C:\Documents and Settings\Administrator\Local Settings\Temp\sapinst_exe.1176.1403175501\dev_sap_kernel_test_19_Jun_2014_05_58_39.
    INFO  
    2014-06-19 05:58:39.504 [synxcfile.cpp:416]
    CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
    lib=syslib module=syslib
    Removed file C:\Documents and Settings\Administrator\Local Settings\Temp\sapinst_exe.1176.1403175501\dev_sap_kernel_test_19_Jun_2014_05_58_39.
    TRACE 
    2014-06-19 05:58:39.504 [syxxclogbook.cpp:209]
    PSyLogBook::initSAPKernelTracing(int traceLevel, const CSyPath & filePath)
    lib=syslib module=syslib
    Initialized SAP kernel tracing to file C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\sapinst_exe.1176.1403175501\dev_sap_kernel
    INFO  
    2014-06-19 05:58:39.515 [synxcpath.cpp:815]
    CSyPath::createFile() lib=syslib module=syslib
    Creating file C:\Documents and Settings\Administrator\Local Settings\Temp\sapinst_exe.1176.1403175501\dev_sap_kernel_test_19_Jun_2014_05_58_39.
    INFO  
    2014-06-19 05:58:39.515 [synxcfile.cpp:416]
    CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
    lib=syslib module=syslib
    Removed file C:\Documents and Settings\Administrator\Local Settings\Temp\sapinst_exe.1176.1403175501\dev_sap_kernel_test_19_Jun_2014_05_58_39.
    TRACE 
    2014-06-19 05:58:39.527 [syxxclogbook.cpp:209]
    PSyLogBook::initSAPKernelTracing(int traceLevel, const CSyPath & filePath)
    lib=syslib module=syslib
    Initialized SAP kernel tracing to file C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\sapinst_exe.1176.1403175501\dev_sap_kernel
    TRACE 
    2014-06-19 05:58:39.562 [iaxxclib.cpp:188]
    CLib::load()
    Opened C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\sapinst_exe.1176.1403175501/iaguieng721.dll
    TRACE 
    2014-06-19 05:58:39.725 [iaxxgenimp.cpp:918]
    CGuiEngineImp::init()
    receiving and sending on port 21200
    TRACE 
    2014-06-19 05:58:39.865 [syxxccuren.cpp:31]
    CSyCurrentProcessEnvironmentImpl::setEnvironmentVariable(const iastring & 'SAPINST_JRE_HOME', const iastring & 'C:/DOCUME~1/ADMINI~1/LOCALS~1/Temp/sapinst_exe.1176.1403175501/jre')
    lib=syslib module=syslib
    Environment variable SAPINST_JRE_HOME set to value 'C:/DOCUME~1/ADMINI~1/LOCALS~1/Temp/sapinst_exe.1176.1403175501/jre'.
    TRACE 
    2014-06-19 05:58:41.905
    exe dir is C:/DOCUME~1/ADMINI~1/LOCALS~1/Temp/sapinst_exe.1176.1403175501
    INFO  
    2014-06-19 05:58:42.55 [synxcpath.cpp:815]
    CSyPath::createFile() lib=syslib module=syslib
    Creating file C:\Program Files\sapinst_instdir\x.
    INFO  
    2014-06-19 05:58:42.55 [synxcfile.cpp:416]
    CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
    lib=syslib module=syslib
    Removed file C:\Program Files\sapinst_instdir\x.
    TRACE 
    2014-06-19 05:58:42.215 [iaxxclib.cpp:188]
    CLib::load()
    Opened C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\sapinst_exe.1176.1403175501/iakdblib721.dll
    TRACE 
    2014-06-19 05:58:42.215
    SAPinst build information:
    abi version : 721
    make variant: 720_REL
    build  
    : 1128529
    compile time: Jan 20 2010 03:41:04
    TRACE 
    2014-06-19 05:58:43.337 [iaxxgenimp.cpp:469]
    CGuiEngineImp::showDialog()
    showing dlg diProductChoice
    TRACE 
    2014-06-19 05:58:43.337 [iaxxgenimp.cpp:488]
    CGuiEngineImp::showDialog()
    <dialog sid="diProductChoice">
    <title>Welcome to SAP Installation Master</title>
    <dialog/>
    TRACE 
    2014-06-19 05:59:00.582 [iaxxclogintimeout.cpp:102]
    CLoginTimeout::run()
    Login in progress
    TRACE 
    2014-06-19 05:59:00.902
    Connection request to guiengine backend by host 192.168.2.4
    TRACE 
    2014-06-19 05:59:01.042
    Protocol version is 3.1
    TRACE 
    2014-06-19 05:59:01.042
    Send connect information
    TRACE 
    2014-06-19 05:59:01.042
    client logged on
    TRACE 
    2014-06-19 05:59:01.142 [iaxxgenimp.cpp:1245]
    CGuiEngineImp::acceptAnswerForBlockingRequest
    Waiting for an answer from GUI
    TRACE 
    2014-06-19 05:59:34.651 [iaxxdlghnd.cpp:97]
    CDialogHandler::doHandleDoc()
    CDialogHandler: ACTION_NEXT requested
    TRACE 
    2014-06-19 05:59:34.651 [iaxxcdialogdoc.cpp:203]
    CDialogDocument::submit()
    <dialog sid="diProductChoice">
    <dialog/>
    INFO  
    2014-06-19 05:59:34.741 [synxcpath.cpp:815]
    CSyPath::createFile() lib=syslib module=syslib
    Creating file C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\x.
    INFO  
    2014-06-19 05:59:34.741 [synxcfile.cpp:416]
    CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
    lib=syslib module=syslib
    Removed file C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\x.
    TRACE 
    2014-06-19 05:59:35.502 [iaxxgenimp.cpp:469]
    CGuiEngineImp::showDialog()
    showing dlg diRestartOrCancel
    TRACE 
    2014-06-19 05:59:35.502 [iaxxgenimp.cpp:488]
    CGuiEngineImp::showDialog()
    <dialog sid="diRestartOrCancel">
    Dialog does not contain standard input handler, so the backend is not able to generate a log entry
    <dialog/>
    TRACE 
    2014-06-19 05:59:35.532 [iaxxgenimp.cpp:1245]
    CGuiEngineImp::acceptAnswerForBlockingRequest
    Waiting for an answer from GUI
    TRACE 
    2014-06-19 06:04:49.283
    current working directory is C:\Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/
    INFO  
    2014-06-19 06:04:49.363 [synxcpath.cpp:815]
    CSyPath::createFile() lib=syslib module=syslib
    Creating file C:\Program Files\sapinst_instdir\x.
    INFO  
    2014-06-19 06:04:49.363 [synxcfile.cpp:416]
    CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
    lib=syslib module=syslib
    Removed file C:\Program Files\sapinst_instdir\x.
    TRACE 
    2014-06-19 06:04:49.403 [syxxcfile.cpp:168]
    CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/dev_sap_kernel, m_realNodeType: 2}, ISyNode::CopyMoveMode_t 0x3, PSyNode &) const 
    lib=syslib module=syslib
    Target file exists and (mode & ISyNode::EXISTING) ==> I will copy/move.
    INFO  
    2014-06-19 06:04:49.403 [synxcfile.cpp:416]
    CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
    lib=syslib module=syslib
    Removed file C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\dev_sap_kernel.
    TRACE 
    2014-06-19 06:04:49.403 [syxxcnode.cpp:441]
    CSyNodeImpl::move(const CSyPath & C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL, ISyNode::CopyMoveMode_t 0x3)
    lib=syslib module=syslib
    Moved C:/Documents and Settings/Administrator/Local Settings/Temp/sapinst_exe.1176.1403175501/dev_sap_kernel to C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/dev_sap_kernel
    TRACE 
    2014-06-19 06:04:49.423 [syxxclogbook.cpp:209]
    PSyLogBook::initSAPKernelTracing(int traceLevel, const CSyPath & filePath)
    lib=syslib module=syslib
    Initialized SAP kernel tracing to file C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\dev_sap_kernel
    TRACE 
    2014-06-19 06:04:52.167
    Running with toplevel file C:\Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL//toplevel.xml
    TRACE 
    2014-06-19 06:04:52.418 [syxxcfile.cpp:130]
    CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/sapinst_dev.2.log, m_realNodeType: 8}, ISyNode::CopyMoveMode_t 0x3, PSyNode &) const 
    lib=syslib module=syslib
    Target node does not exists and (mode & ISyNode::MISSING) ==> I will copy/move.
    TRACE 
    2014-06-19 06:04:52.418 [syxxcnode.cpp:441]
    CSyNodeImpl::move(const CSyPath & C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/sapinst_dev.2.log, ISyNode::CopyMoveMode_t 0x3)
    lib=syslib module=syslib
    Moved C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/sapinst_dev.log to C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/sapinst_dev.2.log
    TRACE 
    2014-06-19 06:04:52.458 [syxxcfile.cpp:130]
    CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/sapinst.2.log, m_realNodeType: 8}, ISyNode::CopyMoveMode_t 0x3, PSyNode &) const 
    lib=syslib module=syslib
    Target node does not exists and (mode & ISyNode::MISSING) ==> I will copy/move.
    TRACE 
    2014-06-19 06:04:52.458 [syxxcnode.cpp:441]
    CSyNodeImpl::move(const CSyPath & C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/sapinst.2.log, ISyNode::CopyMoveMode_t 0x3)
    lib=syslib module=syslib
    Moved C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/sapinst.log to C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/sapinst.2.log
    TRACE 
    2014-06-19 06:04:52.888
    Using custom value info for property SAPINST_MESSAGE_CONSOLE_THRESHOLD.
    TRACE 
    2014-06-19 06:04:52.908
    Running with dialog file C:\Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL//dialog.xml
    TRACE 
    2014-06-19 06:04:53.209
    Running with keydb file C:\Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL//keydb.xml
    TRACE 
    2014-06-19 06:04:54.831 [syxxcfile.cpp:130]
    CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.6.xml, m_realNodeType: 8}, ISyNode::CopyMoveMode_t 0x3, PSyNode &) const 
    lib=syslib module=syslib
    Target node does not exists and (mode & ISyNode::MISSING) ==> I will copy/move.
    TRACE 
    2014-06-19 06:04:54.831 [synxcfile.cpp:516]
    CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.6.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const 
    lib=syslib module=syslib
    Copying file C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.xml to C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.6.xml
    INFO  
    2014-06-19 06:04:56.433 [synxcfile.cpp:716]
    CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.6.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const 
    lib=syslib module=syslib
    Copied file 'C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.6.xml'.
    TRACE 
    2014-06-19 06:05:00.229 [kdxxctaco.cpp:219]
    CKdbTableContainerImpl::syncToContainerFile lib=iakdblib
    CKdbTableContainerImpl::syncToContainerFile start ...
    TRACE 
    2014-06-19 06:05:00.679 [syxxcfile.cpp:130]
    CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.7.xml, m_realNodeType: 8}, ISyNode::CopyMoveMode_t 0x3, PSyNode &) const 
    lib=syslib module=syslib
    Target node does not exists and (mode & ISyNode::MISSING) ==> I will copy/move.
    TRACE 
    2014-06-19 06:05:00.679 [synxcfile.cpp:516]
    CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.7.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const 
    lib=syslib module=syslib
    Copying file C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.xml to C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.7.xml
    INFO  
    2014-06-19 06:05:00.729 [synxcfile.cpp:716]
    CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.7.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const 
    lib=syslib module=syslib
    Copied file 'C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/statistic.7.xml'.
    TRACE 
    2014-06-19 06:05:00.739 [kdxxctaco.cpp:252]
    CKdbTableContainerImpl::syncToContainerFile lib=iakdblib
    after creating out stream
    TRACE 
    2014-06-19 06:05:01.40 [kdxxctaco.cpp:286]
    CKdbTableContainerImpl::syncToContainerFile lib=iakdblib
    CKdbTableContainerImpl::syncToContainerFile stop ...
    TRACE 
    2014-06-19 06:05:06.698 [kdxxctaco.cpp:219]
    CKdbTableContainerImpl::syncToContainerFile lib=iakdblib
    CKdbTableContainerImpl::syncToContainerFile start ...
    TRACE 
    2014-06-19 06:05:07.19 [kdxxctaco.cpp:252]
    CKdbTableContainerImpl::syncToContainerFile lib=iakdblib
    after creating out stream
    TRACE 
    2014-06-19 06:05:07.259 [kdxxctaco.cpp:286]
    CKdbTableContainerImpl::syncToContainerFile lib=iakdblib
    CKdbTableContainerImpl::syncToContainerFile stop ...
    TRACE 
    2014-06-19 06:05:31.894
    SAPinst was started using commandline: C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\sapinst_exe.1176.1403175501\sapinst.exe
    TRACE 
    2014-06-19 06:05:31.894
    SAPinst properties are :
    GUISERVER_DIALOG_PORT=21212
    GUISERVER_HTTP_PORT=4239
    SAPINST_CONTROL_URL=control.xml
    SAPINST_DIALOG_PORT=21200
    SAPINST_DIALOG_URL=dialog.xml
    SAPINST_EXE=SAPINST_EXE
    SAPINST_JSLIB_TRACE=NW,NWUsers,OraCom,NWCTC,ClusterMgt,SystemIdentity
    SAPINST_KEYDB_URL=keydb.xml
    SAPINST_MESSAGE_CONSOLE_THRESHOLD=info
    SAPINST_MESSAGE_URL=.
    SAPINST_PACKAGES_URL=packages.xml
    SAPINST_RESOURCE_URL=resourcepool.xml
    SAPINST_SAVE_INPUT=true
    SAPINST_SCAN_DEVICES=false
    SAPINST_SKIP_DIALOGS=false
    SAPINST_TOPLEVEL_URL=toplevel.xml
    SAPINST_USE_ADVANCED_JS_HANDLING=true
    SELFEXTRACTOR_EXECUTABLE_NAME=C:/Documents and Settings/Administrator/Desktop/AS_ABAP_7_02_SP6_32_bit_Trial_Part_1/NWASABAPTRIAL70206/SAP_NetWeaver_702e_Installation_Master/IM_WINDOWS_I386/sapinst.exe

    Dear Nitin,
    Please provide the below  log for error information.
    import_monitor.java.log, import_monitor.log
    Best Regards,
    Atul

  • Facing error while running jsp page in jdev10g ADF

    Hi,
    I am not able to run pages of an application created in Jdev ADF.I am facing this error.
    can anybody help me out???
    JBO-30003: The application pool (model.ChakDeTrackersLocal) failed to checkout an application module due to the following exception:oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.DMLException, msg=JBO-26061: Error while opening JDBC connection.

    Hi
    Check if you are able to connect to database or not the exception was saying it was encountering error while opening jdbc connection
    Sireesha

  • G/L Account does not exist error while invoicing

    Hi ,
    I am trying to invoice an account. While invoicing it is throwing the following error message G/L Account does not exist.
    From where can I know which G/L account it is refering to? or which main/sub is not mainteined for this ADID.
    Thanks in advance
    Debashish

    Hi There
    Go to the sales document (order VA02) (Contract VA42).  Click on the relevant item and go to > Environment > Analysis > Account determination.  It shows 6 options, click on each one till you find the relevant account.  Do this for all items on the Sales/contract if necessary.
    This can be found in customizing under SPRO > Sales and Distrib > Basic Functions > Account assignment/costing > Revenue account determination, > Assign GL accounts.  Your SD consultant can help you.
    In VF02, release the billing doc and it will give you details as well.
    Hope this helps
    Kind regards
    Dawn

  • Error in Invoice creation in MIRO

    Hello,
    Version 4.6 C
    During invoice creation in MIRO, the following error message occurs :
    " Item: 000001 PO Commitment Item 2CO0703800 Invoice Commitment Item.
    Message No FICUSTOM 068".
    For the message class FICUSTOM 068 in 4.6c the description is "PO Commitment item && Invoice Commitment item"
    we have also checked the PO.there is a sufficient balance in the PO Quantity for this invoice.
    Pls advise.
    Regards
    Prasad M

    Hi Prasad,
    Message FICUSTOM068 was created by the SAP note 567119. Please kindly check this note in the service market place.
    ========================
    As per note 567119:
    068 For Transfer please select both processes RECV and SEND
    Long Text for message 68:
    Diagnosis
    When selecting only SEND (sender side of the transfer process) or RECV
    (receiver side of the transfer process) and not both it could lead to
    inconsistencies in the Database.A  document to transfer the budget could
    be partially deleted.
    System response
    The transaction stops. A pop-up is displayed.
    Procedure
    Please select both SEND and RECV.
    =================
    The strange thing is that this note is only available as of 4.7 release and you are on 4.6. There is no another standard note regarding this error message. Therefore as the text of the error that you are receiving in your system is different from the one provided in the note, it seems to be that it is an own development.
    Did you try to do a watchpoint or checking in the program code (SE38) where this message is changed to this content or where this message is issued? It will give a good direction to understand why this error is issued.
    I hope it helps
    Best Regards,
    Vanessa Barth.

  • How to Debug the Driver Pgm and Smartform while Invoice Creation(VF01)

    Hello All,
    I've configured the Driver Pgm and Smart Form in NACE for the output type RD00. I would like to debug the Driver Pgm and Smartform while creation of invoice using VF01. I've set the break points in the Driver Pgm and Smart form, but its not taking me to there while creating an Invoice using VF01.
    Once the Invoice created, If I go thru the VF02/VF03 to see the output, I'm able to debug.
    Please help me to debug the Driver Program and Smartform during the Invoice Creation.
    I've configured the following objects in NACE:
    Program ZDRIVER_PGM_INVOICE_SMARTFORM
    Form Routine ENTRY
    PDF/Smartform Form ZINVOICE(Smartform)
    Thanks in Advance!
    Anil S.

    Moderator message - Welcome to SCN.
    But please read Please read "The Forum Rules of Engagement" before posting!  HOT NEWS!! and How to post code in SCN, and some things NOT to do... before posting. In particular, asking the same question multiple times is not allowed.
    Thread locked
    Rob

  • Facing error while starting/ stopping Oracle EBS R12 services

    Hi,
    I am trying to shutdown Oracle EBS apps node services from following command and getting following error message. Database listener is up and password is also correct for apps but still facing error. Any suggestions for resolution of this issue.
    [ebsmgr@test scripts]$ sh adstpall.sh
    You are running adstpall.sh version 120.10.12010000.4
    Enter the APPS username: apps
    Enter the APPS password:
    adstpall.sh: Database connection could not be established. Either the database is down or the APPS credentials supplied are wrong.
    USAGE:  adstpall.sh <appsusername/appspassword>
            adstpall.sh <applications_username/applications_password> -secureapps
            adstpall.sh -nodbchk
    adstpall.sh: exiting with status 1
    Regards,
    Salahuddin.

    please see
    R12 Adstrtal.sh Fails with "Database Connection Could Not Be Established error starting all services on the target" (Doc ID 1499837.1)
    R12: "adstrtal.sh: Database connection could not be established" Error When Running Script adstrtal.sh and adstpall.sh (Doc ID 1492611.1)
    ApPsMaStI
    sharing is Caring

  • Facing error while trying login with new user

    Hi All,
    i have created a new user with name abcd and provisioned user with planner access.
    when am trying to login in am facing error as "Application is in maintance mode new user cant login".
    pls let me know how to get application out of maintance mode and login with new user.
    Thanks in advance
    cheers,
    SM.

    SM,
    The error occurs when the database is in read-only mode. The database is changed to read-only when the application/database needs maintenance.
    Use the following MaxL Commands to change the database to read-write mode.
    login UserName Password on EssbaseSvrName;     
    alter application AppName load database DbName;
    alter database end archive;     
    alter application AppName enable commands;
    Hope it helps....
    KosuruS

  • Interesting scenario- user facing error while deleting a sales order

    Hello All,
    I have one interesting scenario and want feedback from your side as soon as possible
    Scenario-
    One of my clients is facing a problem while deleting a sales order.
    the sales order he is trying to delete is the old order created in 2007.
    when i see the document flow the user has created the export order, then delivered it, invoiced and sent it to accounting, accounting document is also cleared. then he cancelled the invoice, reverse PGI and deleted the delivery. the status of the sales order system is showing is being processed. but please note in this case after reversing PGI and deleting a delivery the delivery document disappears from the document flow.
    document flow looks like this
    Order - 200004715                     Being processed
    invoice- 700005310                    completed
    accounting 700005311                 cleared
    Cancel Invoice 700005315            completed
    Accounting 700005316                 cleared
    Now, in 2008 user is trying to delete the sales order but he is unable to do the same. system is giving him message "unable to delete sales order because of subsequent document 70005310 (which is invoice number)"
    Can somebody please throw some light on this problem.
    Thanks in advance.

    Hi,
    As fas as I know, this is standard system behaviour. The reason - you have done PGI (which has created a material document as well as accounting doc) and invoiced & reversed (which again has created accounting documents & rversal documents). All these documents are referencing the sales order.
    If you delete sales order, sales order number gets deleted from VBAK /VBAP tables.
    Hence, in relational data base scenario (meanin SAP in this context), deletion of sales order after creation of subsequent documents is not feasible.
    Hope it clarifies the issue.
    Regards
    Murali

Maybe you are looking for