Facing error while reading through ESB
I am trying to load a csv file using ESB process but ESB COnsole displays following error. I am not able to understand why this error occurs.
ERROR
An unhandled exception has been thrown in the ESB system. The exception reported is: "org.collaxa.thirdparty.apache.wsif.WSIFException: exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: set.by.caller: set.by.caller at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeOperation(WSIFOperation_JaxRpc.java:1714) at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeRequestResponseOperation(WSIFOperation_JaxRpc.java:1460) at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.executeInputOnlyOperation(WSIFOperation_JaxRpc.java:1141) at oracle.tip.esb.server.common.wsif.WSIFInvoker.executeOperation(Unknown Source) at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(Unknown Source) at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(Unknown Source) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.nextService(Unknown Source) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.processBusinessEvent(Unknown Source) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatchNonRoutingService(Unknown Source) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(Unknown Source) at oracle.tip.esb.server.dispatch.BusinessEvent.raise(Unknown Source) at oracle.tip.esb.utils.EventUtils.raiseBusinessEvent(Unknown Source) at oracle.tip.esb.server.service.EsbRouterSubscription.onBusinessEvent(Unknown Source) at oracle.tip.esb.server.dispatch.EventDispatcher.executeSubscription(Unknown Source) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.processSubscription(Unknown Source) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.processSubscriptions(Unknown Source) at oracle.tip.esb.server.dispatch.EventDispatcher.dispatchRoutingService(Unknown Source) at oracle.tip.esb.server.dispatch.InitialEventD
STACK
oracle.tip.esb.server.common.exceptions.BusinessEventRetriableException: An unhandled exception has been thrown in the ESB system. The exception reported is: "org.collaxa.thirdparty.apache.wsif.WSIFException: exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: set.by.caller: set.by.caller at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeOperation(WSIFOperation_JaxRpc.java:1714) at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeRequestResponseOperation(WSIFOperation_JaxRpc.java:1460) at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.executeInputOnlyOperation(WSIFOperation_JaxRpc.java:1141) at oracle.tip.esb.server.common.wsif.WSIFInvoker.executeOperation(Unknown Source) at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(Unknown Source) at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(Unknown Source) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.nextService(Unknown Source) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.processBusinessEvent(Unknown Source) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatchNonRoutingService(Unknown Source) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(Unknown Source) at oracle.tip.esb.server.dispatch.BusinessEvent.raise(Unknown Source) at oracle.tip.esb.utils.EventUtils.raiseBusinessEvent(Unknown Source) at oracle.tip.esb.server.service.EsbRouterSubscription.onBusinessEvent(Unknown Source) at oracle.tip.esb.server.dispatch.EventDispatcher.executeSubscription(Unknown Source) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.processSubscription(Unknown Source) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.processSubscriptions(Unknown Source) at oracle.tip.esb.server.dispatch.EventDispatcher.dispatchRoutingService(Unknown Source) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(Unknown Source) at oracle.tip.esb.server.dispatch.BusinessEvent.raise(Unknown Source) at oracle.tip.esb.utils.EventUtils.raiseBusinessEvent(Unknown Source) at oracle.tip.esb.server.service.impl.inadapter.ESBListenerImpl.processMessage(Unknown Source) at oracle.tip.esb.server.service.impl.inadapter.ESBListenerImpl.onMessage(Unknown Source) at oracle.tip.adapter.fw.jca.messageinflow.MessageEndpointImpl.onMessage(MessageEndpointImpl.java:281) at oracle.tip.adapter.file.inbound.ProcessWork.publishMessage(ProcessWork.java:826) at oracle.tip.adapter.file.inbound.ProcessWork.doTranslation(ProcessWork.java:580) at oracle.tip.adapter.file.inbound.ProcessWork.processMessages(ProcessWork.java:266) at oracle.tip.adapter.file.inbound.ProcessWork.run(ProcessWork.java:179) at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242) at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215) at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190) at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:819) at java.lang.Thread.run(Thread.java:595) ". at oracle.tip.esb.server.common.wsif.WSIFInvoker.executeOperation(Unknown Source) at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(Unknown Source) at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(Unknown Source) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.nextService(Unknown Source) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.processBusinessEvent(Unknown Source) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatchNonRoutingService(Unknown Source) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(Unknown Source) at oracle.tip.esb.server.dispatch.BusinessEvent.raise(Unknown Source) at oracle.tip.esb.utils.EventUtils.raiseBusinessEvent(Unknown Source
Can anybody help me on this one please.
Regards,
Raghu
Hi my name is Enio....
I got this erro below, I placed the order to submit, that I got the message Order submited...
I was viewing DHL Shipment Status in the Oracle ESB Control, I get in INSTANCES, instances pane appears i selected the instance, i saw the tracking with an error on Fullfilment... [sendMessage]
please there is something that I can do to fix it?
ERROR:
oracle.tip.esb.server.common.exceptions.BusinessEventRetriableException: An unhandled exception has been thrown in the ESB system. The exception reported is: "org.collaxa.thirdparty.apache.wsif.WSIFException: esb:///ESB_Projects/SOADEMO_FulfillmentESB/FulfillmentBatch.wsdl [ sendMessage_ptt::sendMessage(PurchaseOrder) ] - WSIF JCA Execute of operation 'sendMessage' failed due to: Adapter Framework unable to create outbound JCA connection. esb:///ESB_Projects/SOADEMO_FulfillmentESB/FulfillmentBatch.wsdl [ sendMessage_ptt::sendMessage(PurchaseOrder) ] - : The Adapter Framework was unable to establish an outbound JCA connection due to the following issue: ORABPEL-12133 ERRJMS_JMS_EXCEP. Unable to create JMS connection due to JMS exception. Please examine the log file to determine the problem. [Caused by: JMSServer[soatemp.network.ctbc:12601]: failed to authenticate "oc4jadmin/welcome1" via "[JAZNUserAdaptor: user=oc4jadmin]".] ; nested exception is: ORABPEL-12511 Adapter Framework unable to create outbound JCA connection. esb:///ESB_Projects/SOADEMO_FulfillmentESB/FulfillmentBatch.wsdl [ sendMessage_ptt::sendMessage(PurchaseOrder) ] - : The Adapter Framework was unable to establish an outbound JCA connection due to the following issue: ORABPEL-12133 ERRJMS_JMS_EXCEP. Unable to create JMS connection due to JMS exception. Please examine the log file to determine the problem. [Caused by: JMSServer[soatemp.network.ctbc:12601]: failed to authenticate "oc4jadmin/welcome1" via "[JAZNUserAdaptor: user=oc4jadmin]".] Please examine the log file for any reasons. Enable DEBUG logging in the BPEL Console. at oracle.tip.adapter.fw.wsif.jca.WSIFOperation_JCA.executeRequestResponseOperation(WSIFOperation_JCA.java:631) at oracle.tip.adapter.fw.wsif.jca.WSIFOperation_JCA.executeInputOnlyOperation(WSIFOperation_JCA.java:726) at oracle.tip.esb.server.common.wsif.WSIFInvoker.executeOperation(Unknown Source) at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(Unknown Source) at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(Unknown Source) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.nextService(Unknown Source) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.processBusinessEvent(Unknown Source) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatchNonRoutingService(Unknown Source) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(Unknown Source) at oracle.tip.esb.server.dispatch.BusinessEvent.raise(Unknown Source) at oracle.tip.esb.utils.EventUtils.raiseBusinessEvent(Unknown Source) at oracle.tip.esb.server.service.EsbRouterSubscription.onBusinessEvent(Unknown Source) at oracle.tip.esb.server.dispatch.EventDispatcher.executeSubscription(Unknown Source) at oracle.tip.esb.server.dispatch.DeferredEventDispatcher.processSubscriptions(Unknown Source) at oracle.tip.esb.server.dispatch.EventDispatcher.dispatchRoutingService(Unknown Source) at oracle.tip.esb.server.dispatch.DeferredEventDispatcher.dispatch(Unknown Source) at oracle.tip.esb.server.dispatch.agent.JavaDeferredMessageHandler.handleMessage(Unknown Source) at oracle.tip.esb.server.dispatch.agent.ESBWork.process(Unknown Source) at oracle.tip.esb.server.dispatch.agent.ESBWork.run(Unknown Source) at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242) at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215) at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190) at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:819) at java.lang.Thread.run(Thread.java:595) Caused by: ORABPEL-12511 Adapter Framework unable to create outbound JCA connection. esb:///ESB_Projects/SOADEMO_FulfillmentESB/FulfillmentBatch.wsdl [ sendMessage_ptt::sendMessage(PurchaseOrder) ] - : The Adapter Framework was unable to establish an outbound JCA connection due to the following issue: ORABPEL-12133 ERRJMS_JMS_EXCEP.
Can anyone help me with this please?
Tkanks!!!
Similar Messages
-
Error while reading data through External Table!!!
CREATE TABLE "COGNOS"."EXT_COGNOS_TBS9_TEST"
( "ITEM_DESC" VARCHAR2(200 BYTE),
"EXT_CODE" VARCHAR2(20 BYTE),
"RC_DATE" DATE,
"RES_KD_AMNT" NUMBER(18,3),
"RES_FC_AMNT" NUMBER(18,3),
"NRES_KD_AMNT" NUMBER(18,3),
"NRES_FC_AMNT" NUMBER(18,3),
"TOTAL" NUMBER(18,3),
"OF_WHICH_OVR1" NUMBER(18,3)
ORGANIZATION EXTERNAL
( TYPE ORACLE_LOADER
DEFAULT DIRECTORY "EXTDATADIR"
ACCESS PARAMETERS
( RECORDS
DELIMITED BY NEWLINE LOAD WHEN *({color:#ff0000}EXT_CODE LIKE 'TBS9%'{color})* FIELDS TERMINATED BY ','
MISSING FIELD VALUES ARE NULL )
LOCATION
( 'TBS9_TEST.CSV'
External table creation went through successfully but am getting error while reading data. Am quite sure error is because of above line in red color. Could you please help me in transforming logic.
Thanks in Advance,
APLet's start with the basics...
1) You state that you are getting an error. What error do you get? Is this an Oracle error (i.e. ORA-xxxxx)? If so, please include the error number and the error message as well as the triggering statement. Or is the problem that rows are getting written to the reject file and errors are being written to the log file? If so, what record(s) are being rejected and what are the reasons given in the log file? Or perhaps the problem is something else?
2) You state that you are quite sure that the problem relates to the hilighted code. What makes you quite sure of this?
Justin -
Urgent Help Req.: Exception=ORABPEL-11162 Error while reading native data
Hi All,
I am getting below error: Exception=ORABPEL-11162
Error while reading native data.
[Line=6, Col=7|http://forums.oracle.com/forums/] Not enough data available in the input, when trying to read data of length "22" for "element with name PurOrderNum" from the specified position, using "style" as "fixedLength" and "length" as "22".
Ensure that there is enough data from the specified position in the input.
Let me also give you the brief scenario of what I am trying to achieve.
INTERFACE FUNCTIONING:_
I have an interface which reads the records in a file in a chunk through ChunkRead adapter and and after one successful reading if chunk it calls the DB adapter to insert the records in the table.
Now these records are committed and next chunk is read and the process goes on till all the records are read.
After this the API is called which does the processing of these records.
Inserting records in the DB is a XA transaction which means if anything goes wrong while inserting the data, the records which are added earlier are rolled back.
ISSUE:_
Now the issue comes when I do the negative testing. Since my file is based on fixed length schema., I change the length of last record from 15 to 13. (say total are 10 records)
Now what happens is when chunkread tries to read the record of 15 length it gets only 13 characters and hence ignores the records.
But the chunkread reads all other 9 records correctly and sends this to DB adapter which now inserts them correctly in the DB.
But being a global transaction I want that if any record is missing from DB in comparison to those in file then whole transaction should roll back.
So I am unable to make this whole process as global transaction. This is because the ChunkRead adapter inspite of detecting the error doesn’t throw it back.
Moreover if this problem occurs in say next chunk then also I am unable to find out how to rollback the whole transaction. Because the first chunk was correct.
So basically two concerns are there:+
How to detect that chunkread adapter has missed one record?+
Secondly, If it’s detected then how should I rollback the transaction that caused earlier records to enter into database?+
Please let me know if anyone has faced this issue earlyer and how it got resolved. Any pointers regarding this would be of great help.
Also attached is the chunkread log for reference.
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-10-06T09:23:58.466-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="TRACE"></MSG_TYPE>
<MSG_LEVEL>16</MSG_LEVEL>
<HOST_ID>usmlrh01.xyz.com</HOST_ID>
<HOST_NWADDR>192.168.245.39</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>57</THREAD_ID>
<USER_ID>orasoa</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>192.168.245.39:29832:1223297491683:44</UNIQUE_ID><SEQ>130</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: FileRejector::rejectTextualMessage errList=[oracle.tip.pc.services.translation.xlators.nxsd.ErrorList@a5213b]</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-10-06T09:23:58.466-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="TRACE"></MSG_TYPE>
<MSG_LEVEL>16</MSG_LEVEL>
<HOST_ID>usmlrh01.xyz.com</HOST_ID>
<HOST_NWADDR>192.168.245.39</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>57</THREAD_ID>
<USER_ID>orasoa</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>192.168.245.39:29832:1223297491683:44</UNIQUE_ID><SEQ>130</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: FileRejector::rejectTextualMessage badCount=[1]</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-10-06T09:23:58.467-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="TRACE"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>usmlrh01.xyz.com</HOST_ID>
<HOST_NWADDR>192.168.245.39</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>57</THREAD_ID>
<USER_ID>orasoa</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>192.168.245.39:29832:1223297491683:44</UNIQUE_ID><SEQ>130</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: Rejecting message fileName=/rh01/s01/n01/Distributions/B2B/Gentran/In/855/Test.txt, startLine=4, startColumn=1, endLine=-1, endCol=-1, Exception=ORABPEL-11162
Error while reading native data.
[Line=6, Col=7] Not enough data available in the input, when trying to read data of length "22" for "element with name PurOrderNum" from the specified position, using "style" as "fixedLength" and "length" as "22".
Ensure that there is enough data from the specified position in the input.
}</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
PFB the version details :
SOA suite version : 10.1.3.3.1 and JDEV : 10.1.3.3
Edited by: SOA Team on Oct 6, 2008 10:48 PMJust a thought, you could set the terminator for the last field as {eol} instead of length, this means that it should read the last field regardless of the length.
Depending on the logic of Db adapter the error could be traped due to incorrect length.
If the file starts each row with a constant(s), e.g. 01 then you can terminate the previous line on that, this is the better option but relys on the file format.
The other option is a little thing call compensation, ouch. Basically this allows you to back out commited rows but you have to provide all the logic, it is generally something people avoid because of the complexity.
cheers
James -
Unable to Log-in *SAP System Message : Error while reading a Dynpro*
Hi,
We are facing issues while logging-in through SAP logon 710.
The system throws an error dialog box with the below message:
SAP System Message : Error while reading a Dynpro
At the OS level Java process server0 is in stop status with exit code -11113. In ABAP WP Table all processes are in wait status.Hi Please find the contents of std_server.out below.
stdout/stderr redirect
node name : server0
pid : 4124
system name : KEC
system nr. : 01
started at : Mon Jul 27 15:44:57 2009
[Thr 5656] MtxInit: -2 0 0
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
SAP J2EE Engine Version 7.00 PatchLevel 110760.44 is starting...
Loading: LogManager ... 250 ms.
Loading: PoolManager ... 0 ms.
Loading: ApplicationThreadManager ... 47 ms.
Loading: ThreadManager ... 16 ms.
Loading: IpVerificationManager ... 0 ms.
Loading: ClassLoaderManager ... 16 ms.
Loading: ClusterManager ... 93 ms.
Loading: LockingManager ... 32 ms.
Loading: ConfigurationManager ... 1032 ms.
Loading: LicensingManager ... 0 ms.
Loading: CacheManager ... 93 ms.
Loading: ServiceManager ...
Loading services.:
Service runtimeinfo started. (16 ms).
Service cross started. (31 ms).
Service file started. (31 ms).
Service memory started. (31 ms).
Service timeout started. (16 ms).
Service trex.service started. (32 ms).
Service userstore started. (0 ms).
Service jmx_notification started. (15 ms).
Service p4 started. (62 ms).
Service classpath_resolver started. (16 ms).
Service deploy started. (3722 ms).
Service MigrationService started. (31 ms).
Service bimmrdeployer started. (0 ms).
Service log_configurator started. (5177 ms).
Service locking started. (0 ms).
Service http started. (126 ms).
Service naming started. (157 ms).
Service failover started. (16 ms).
Service appclient started. (31 ms).
Service javamail started. (47 ms).
Service ts started. (47 ms).
Service jmsconnector started. (47 ms).
Service licensing started. (15 ms).
Service connector started. (93 ms).
Service iiop started. (94 ms).
Service configuration started. (16 ms).
Service webservices started. (265 ms).
Service dbpool started. (1204 ms).
Service UT started. (0 ms).
Jul 27, 2009 3:45:09 PM com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_54] Fatal: Initialization of ABAP data source (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed: " Error while reading a dynpro ". This message is critical if it appears during the startup of the AS Java.
Jul 27, 2009 3:45:09 PM ...re.server.ume.service.UMEServiceFrame [SAPEngine_System_Thread[impl:5]_54] Fatal:
service com.sap.security.core.ume.service ================= ERROR =================
Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details: Error while reading a dynpro
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Error while reading a dynpro
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
... 6 more
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details: Error while reading a dynpro
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Error while reading a dynpro
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
... 6 more
[Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
Jul 27, 2009 3:45:09 PM com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_54] Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started. -
Facing error while invoice creation in AR.
Facing error while invoice creation in AR as Please complete your tax accounting flexfield. We are creating invoice through API.
Regards
SridharHi,
Please go through the below Note ID.
Autoinvoice Error On Tax Codes - Please Complete Your Tax Accounting Flexfield [ID 1469285.1]
Regards,
Raju. -
I am facing error while running Quickpay in Fusion payroll that "The input value Periodicity is missing for element type KGOC_Unpaid_Absence_Amount. Enter a valid input value". Any idea?
This is most probably because the Periodicity input value has been configured as "Required" and no value has been input for it.
Please enter a value and try to re-run Quick Pay. -
Error while scheduling through web service
We have created Web service through WSDL of OBI Publisher. Also we created a web service proxy client to call the services offered by OBI Publisher. We actually want to "Automate the Scheduling of Reports" according to our requirement:
1. We used to schedule the reports manually by giving the parameters(used to populate data in reports) and other fields like select report name, report destination, format of reports ( .pdf, .docx,etc) through Oracle BI Publisher.
2. As there are thousands of permutations of report input parameters possible, so it is difficult to schedule them manually.
3.We also want to schedule report to a particular folder according to some parameter, for the ease of the user visibility.
Above requirements are not currently available with Oracle BI Publisher.
We are getting error while scheduling through ScheduleRequest class.
The client.java is as follows:
public class ScheduleServiceClient
@WebServiceRef
private static ScheduleService_Service scheduleService_Service;
public static void main(String [] args)
scheduleService_Service = new ScheduleService_Service();
ScheduleService scheduleService = scheduleService_Service.getScheduleService();
// Add your code to call the desired methods.
try {
FTPDeliveryOption ftpdo =new FTPDeliveryOption();
ftpdo.setFtpServerName("ServerName");
ftpdo.setFtpUserName("Username");
ftpdo.setFtpUserPassword("Password");
ftpdo.setRemoteFile("/path/TestFile");
ftpdo.setSftpOption(true);
List<FTPDeliveryOption> listobj=new ArrayList<FTPDeliveryOption>();
listobj.add(ftpdo);
ArrayOfFTPDeliveryOption ar =new ArrayOfFTPDeliveryOption();
ar.setItem(listobj);
DeliveryChannels dc = new DeliveryChannels();
dc.setFtpOptions(ar);
ScheduleRequest scheduleRequest = new ScheduleRequest();
scheduleRequest.setDeliveryChannels(dc);
scheduleRequest.setJobLocale("en-US");
scheduleRequest.setUserJobName("Job_1_WebService");
scheduleRequest.setDataModelUrl("Url");
scheduleRequest.setStartDate("Mar 27, 2015 12:40:00 PM");
scheduleRequest.setJobTZ("[GMT+05:30] Calcutta, Chennai, Mumbai, New Delhi");
String userID = "BI_Publisher_Username";
String password = "BI_Publisher_Password";
scheduleService.scheduleReport(scheduleRequest,userID,password);
} catch(Exception exception) {
exception.printStackTrace();
Snapshot of error is attached.
Kindly suggest the way of getting out of this error.Hi
Check this thread
WD Message Manager
Reward opints if usefull.... -
Error while reading the PO in the Backend system. Inform system admin
Hi All,
We are having a peculiar issue of 'Error while reading the PO in the Backend system. Inform system admin'.
The P.O is in ordered status in SRM but the same is not getting transferred to backend ECC system.
No error messages or logs in RZ20, SLG1 any where.
All programmes like BBP_GET_STATUS_2 and CLEAN_REQREQ_UP are running fine.
Tried pushing the P.Os manually using function module (BBP_PD_PO_TRANSFER_EXEC_V2) to backend ECC.
It was working fine till a week ago and suddenly this problem is coming.
We had implemented few OSS notes suggested by SAP for the issue of 'shopping carts appearing in sourcing cockpit even after P.O creation' in both development and test system.
Now this issue is coming up in test system where as development system is working fine.
Please let us know where to look and how to resolve this issue.
A quick response would be highly appreciated.
Regards,
TejaI am facing the same issue with one PO in the Production system.
SRM 5.0 , R/3 4.6C Extended classic scenario.
I checked the status of other PO's created today. I see them in R/3. There is one PO which was created a week back which shows up as "ordered" in SRM but the PO is missing in R/3. When clicked on the details on the web, system throws the error
Error while reading the PO in the Backend system. Inform system admin.
Message no. BBP_CF010
I checked RZ20, SLG1 no errors were found. I checked RFC connection, it was working fine too.
I tried pushing the PO using the FM BBP_PD_PO_TRANSFER_EXEC, it did not solve the problem.
In SRM WEBGUI Process PO - Item data -->follow on documents --> PO status is shown as Archived.
Any inputs would be greatly appreciated. Please throw some light on this issue.
Krishna -
We are facing error while executing Bex report.
Hi Gurus:
We are facing error while executing Bex report.
Messge :
u201CQuery 0: Runtime error program state check for conversation 05284411 / CP with parallel processing via RFC
Message no. DBMAN428u201D
The query is based upon Multiprovider (based upon 2 basic cubes).
Both cubes are partitioned by info object 0CALMONTH, (valid range - 01.2005 - 012.2010).
Those cubes are not containing any non-cumulative key figures and Service package level for SAP NetWeaver BI 7.0 is u2018SAPKW70012u2019.
I have checked those cubes in RSRV and carry out following steps:
"All Elementary Tests -> Transaction Data" and execute the repair "Consistency of the Time Dimension for an Info Cube"
I have found system inconsistency like u201CRecord with the DIMID 2 contains non-fitting time characteristics u201C
Detail ERROR:
Record with the DIMID 2 contains non-fitting time characteristics
Message no. RSCV053Diagnosis
The data record of the time dimension table with the described DIMID contains values for time characteristics that do not fit together.
I have found the u2018 Note 1130450 - Query displays error DBMAN 284; RSRV: Time dimension checku2019 for this but still not sure this will work or not .
I tested this in dev server , didn't feel useful.
Could you please let us know what to correct this error.
Anwser will be rewared.
Regards,>
Surendra Pande wrote:
> Anwser will be rewared.
> Regards,
Go read the RULES of these forums. -
Error while reading ID of own business system from the SLD
HI guys when trying to send Idoc from my R/3 system to SUS i am getting the following error in XI
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>DSM</SAP:P1>
<SAP:P2>900</SAP:P2>
<SAP:Stack>Error while reading ID of own business system from the SLD for system DSM and client 900</SAP:Stack>
I checked in sxmb_adm on both the ends on Xi as well as on my SUS server in Xi the role is the Integration server and on the SUS it is Application server also checked SLDAPICUST which is configured rite. Plz help me to come out of the problem.
Regards,
AnandHi Anand,
check the two thing's in XI.
1. First created technical system in XI to identify your XI server (Web as ABAP and Web AS Java)
2. Create the business system based on above technical system and select the role of business system is Integration server.
URL : http://<hostname>:<ICM Port>/sap/xi/engine?type=entry.
3. Create the technical system based on your SAP R/3 system.
4. Create the business system based on your SAP R/3 system.
here you need to select role of business system : Application system.
related integration server is : <XI System SID has to come>
and try to refresh the initical cache once ...
http://<hostname>:<j2ee stack port>/CPACache/refresh?mode=full
after all the things post what is the problem you are faceing.
Regards,
Venu. -
Error while reading PO message when creating confirmation for PO
Hi all,
We are on SRM 5.0 SP 13. Extended Classic.
While creating confirmation for PO in the system,whenI click on the CREATE CONFIRMATION icon,I get the following error:
Error while reading PO in backend system.Inform System admin.
when I goto change the PO,I get the foll errors:
System of purchasing organization O 00000152 and purchasing group O 00000126 differ
Organization O 00000126 is not a purchasing group; Inform system administration
Organizational unit O 00000181 is not permitted as purchasing organization
Purchasing group O 00000126 is not assigned to purchasing organization O 00000152
On further analysis,I found that the issue is mainly because f the Porg /Grp assigned in the PO doesnt exist now in the org structure in PPOMA_BBP.
Can I change the Porg/grp now in the PO ?If so,how do i do that ?when i go to the dropdown for the Porg/grp it doesnt show me all of the current Porg/Grps maintained in the Org structure?How does the system determine which P org /grp to show in the value help for these fields under BASIC DATA tab in POu?
Please advise how I can get rid of this error.
Thanks!
Edited by: Rads1234 on Nov 29, 2010 7:40 PMHi Gurus,
We are on SRM 7 and we are currently facing the same issue.
In our case, when a PGroups is deleted and unassigned, an interfase from HR is raised and i the SRM PPOMA the Pgroup is not valid anymore and unassigned from the Purchasing Organization.
Once this happens, we face a blocking issue for all the documents created with Purchasing Groups that has been deleted.
These documents cannot be processed anymore and and error saying that Purchasing group is not assigned to purchasing organization... is raised.
Currently we are manually mantaining the validity of the Purchasing Group via PPOMA and transaction PP01. We put the validity to unlimited and the documents can be processed again.
Anyway we would like to avoid this manual update and to have a false information in te system where the PGroup will be shown as valid while it has been deleted in the past.
Could you please advise on the best solution on it?
Many Thanks in advance.
Best Regards,
Valentino -
Message failing in SXMB_moni----Error while reading from the secure store
Hi,
The scenario is as below
A file is picked up from a folder and processed to enrich it.This enriched file is then written back in a different folder.
The message is failing in sxmb_moni while trying to write the file in the folder.
The PI system is a system copy of another system and few of the configuration objects are transported through a tpz file to this PI system.The file receiver channel used to write this file is also transported through this tpz file.
Below is the error seen in moni.:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?><!-- Call Adapter --> <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Category>XIServer</SAP:Category><SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code><SAP:P1/><SAP:P2/><SAP:P3/><SAP:P4/><SAP:AdditionalText>Error while reading from the secure store: ERROR_U: No service user password found for Adapter Engine</SAP:AdditionalText><SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine
</SAP:Stack><SAP:Retry>M</SAP:Retry></SAP:Error>
Below is Trace log:
<Trace level="1" type="B" name="PLSRV_CALL_ADAPTER"></Trace><!-- ************************************ -->
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV"></Trace><!-- ************************************ -->
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL"></Trace><!-- ************************************ -->
<Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP"></Trace><!-- ************************************ -->
<Trace level="1" type="T">error reading secstore:Error while reading from the secure store: ERROR_UNKNOWN: System-dependent data for entry changed: / (SECSTORE,031) </Trace>
<Trace level="1" type="System_Error">Error while reading access data (URL, user, password) for the Adapter Engine </Trace>
</Trace>
</Trace>
<Trace level="1" type="System_Error">Error exception return from pipeline processing! </Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST"></Trace><!-- ************************************ -->
Is this because PI system is a system copy of another system ?
Regards,
SnehaError while reading access data (URL, user, password) for the Adapter Engine
Check out Michal's reply:
Re: URL for Central Adapter Engine
As you said there was a system copy it may be the case that some things were not configured properly -
Error while reading data for reporting
Hi Gurus,
I tried to get answer from the forums but not got exact answer to slove my issue..
Q: I had generated 10 reports on Multiprovider(Virtual cube + std Cube) on Bex analyzer.
But when i am Executing reports 3 reports are getting result where remaining 7 reports are throughing same error.
Error: error reading the data of infoprovider
error system error: no more storege space available for extending an internal table
error massage from data source XXXXXX from Source system XXX
error error occured during parallel processing
error error while reading data, navigation is possible
Where their are no parallel processing are going.
the 3 reports are taking 15 min to generate the report..
data is available in both sources with same selection options.
Can any one please through some light, what exactly need to do to get all the reports and to reduce the response time.
thanks in advance.
SandyHi,
The problem was solved.
I had given restriction on 0COUNTRY with out calling Company code in the Column.
Were 0COUNTRY is also an attribute of 0COMP_CODE.
so i called both in the report and got the report with results...
this is how i solved the issue.
Thanks
Sandy -
SLD Error in IE:Error while reading ID of own business system from the SLD
Dear Champs,
Scenario : JDBC to Proxy(APO system)
We are getting below error in MONI UAT Box. All other interface are working fine but we are facing issue for a particular Bussiness System also logical system are maintained properly.the same interface is working fine in other UAT box.
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>R/3 Sys ID</SAP:P1>
<SAP:P2>"Client"</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading ID of own business system from the SLD for system "R/3 Sys ID"and client "Clnt no"</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
Regards,
ManikandanHi Mani,
Solution 1:
Check if the techncal system has associated Business system. I think there is something wrong in your SLD configuration and try to correct it.
Solution 2:
Create a Business system in the ID, and create the communication channel do the respective changes in ID ( I.e Receiver agreement, Receiver determination & Interface). -
DAC: "error while reading repository table". Please help!
Hi everybody,
I copied DAC directory from server to a workstation.
DAC client on server machine runs normally.
When trying to run DAC client on the workstation, I get an error message "Error while reading repository table".
I tried to find any DAC log file to get some additional information, but I couldn't.
The connection in DAC seems to be configured properly (test connection successful).
The only difference I found between server and workstation is that there are two Oracle homes installed on the workstation and one - on the server.
Thanks,
AlexSo you can read the tables now? Good to know.
Just as a hint: if you "tnsping" your data source from a command window, you'll see which path and file is used, so you can find out which home.
TNS Ping Utility for 32-bit Windows: Version 11.1.0.6.0 - Production on 04-MAR-2009 16:42:43
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
C:\Oracle\product\11.1.0\client_1\network\admin\sqlnet.ora <--- my 11g home is used and not the 9i or 10g which also reside on this machine.
@DAC client can't connect to server: i.e. the icon stays red?
- Is your server up and running? (I don't want to start a flame war, but it happens to the best of us)
- Did you go through the steps here? http://download.oracle.com/docs/cd/E12513_01/doc/bic.101/e12653/dac_configure.htm
Cheers,
C.
Maybe you are looking for
-
I want to send my daughter in Australia a BT headset from the US, will there be a compatibilty problem?
-
Screen turning grey and demanding restart
This may have been covered already, and my apologies if so, but I'm in the middle of a project and a google search turned up nothing. Every so often - and it seems to only happen when I'm using Safari - the screen will turn grey (from top to bottom)
-
What do you do when the fingerprint id just turns off and there is no start backup
it just turned off and wont start back up. and wish for it too work again.
-
Is the web browser on the iTouch good?
For example, is it fast enough to handle streaming music from mobile internet radio stations?
-
Hello, I search some algorithm and source code in Java for compute 3D Skeleton ok discrete shape. Someone know where I cna find it ? Thank you...