Facing issue while installing micrsoft deployment kit 2012

Can some 1 help me .
I am using windows server 2008 data center 32 bit.
I am facing a issue after installation of microsoft deployment kit 2012. The error occurs "powershell is required to use the deployment workbench" even i have installed the powershell but still the issue occurs. Please some one suggest me how can
i resolve this issue?

Can some help me .
I am using windows server 2008 data center 32 bit.
I am facing a issue after installation of microsoft deployment kit 2012. The error occurs "powershell is required to use the deployment workbench" even i have installed the powershell but still the issue occurs. Please some one suggest me how can
i resolve this issue?
Add Windows powershell from add Features
Or you can
download Windows PowerShell 3.0 from the Microsoft Download Center. You need to download the appropriate package for your target operating system. Windows 7 and Windows Server 2008 R2 must have at Service Pack 1, and Windows Server 2008 requires Service
Pack 2
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

  • Facing Issue while Installing SOA server for setting up BPM11g working environment

    Hi All,
    I have been able to install Database and Weblogic Server but I am facing issue in installing SOA server.
    I am trying to install it for running BPM 11g application.
    I saw the same problem has already been answered but available solutions are not resolving my problem.
    Error Message:Provide the JDK/JRE location while launching the installer.Invoke the setup.exe with -jreLoc<JDK/JRE location absolute path>parameter(s).
    I tried both way for initializing the installation. i.e directly through setup.exe and by command prompt but in both the cases I am getting same error.
    It is not asking for Java path in command prompt also.
    a)In my system java 7 is installed.
    b)I have used Oracle Database 11g instead of XE
    Can this be the reason?
    I checked Program Files:
    jre7 and jdk1.7.0_45 are there.
    I also have set JAVA_HOME in environment variable as C:\Program Files\java\jre7
    path :C:\Program Files\java\jdk1.7.0_45\bin
    Please help me in fixing this as I am stuck in this installation from last few days.
    Thanks!

    Hi Binay,
    You might want to consider instead installing it using JDK 1.6.
    Here's where you can check the Fusion Middleware configurations:  http://www.oracle.com/technetwork/middleware/downloads/fmw-11gr1certmatrix.xls
    It's buried in there, but bottom line is that Oracle BPM 11g (PS6) 11.1.1.7 needs JDK 1.6 (for Windows it is either JDK 1.6.0_35 or JRockit 6 Update 37 R28.2.5+) and I'd suggest you use JRockit.
    Dan

  • Facing issue while installing SAP 4.7 EX2

    Hello,
    While installing DB instance for SAP 4.7 facing issue...
    ERROR 2009-12-16 17:21:07
    FSL-06002  Error 216 (Unknown, try 'net helpmsg <Nr>') in execution of a 'CreateProcess' function, line (284), with parameter (E:\usr\sap\D60\SYS\exe\run/brconnect ...).
    I 'm stuck in runnign Update Database statistics step..any help is really appreciated..

    user logged in has got Administrator right. Also do we need to log in with sidadm for installing DB instance or administrator user is sufficient?
    Please find more detail logs....
    we are getting error--ERROR 2009-12-16 17:21:07
    FSL-06002  Error 216 (Unknown, try 'net helpmsg <Nr>') in execution of a 'CreateProcess' function, line (284), with parameter (E:\usr\sap\D60\SYS\exe\run/brconnect ...).,
    Getting error, when we are using BRtools 6.4
    ERROR 2009-12-16 19:28:41
    CJS-00288  Could not update database statistics.<br>DIAGNOSIS: Command brconnect -u / -c -f crsyn -o SAPD60 returned 3.<br>SOLUTION: See brconnect.log for details.,
    when we are using latest tools of Br 7.0
    Also r3trans is failing...reason is ERROR => Cannot connect: TNS-name missing
    Any advice...i have also added parameter dbs_ora_tnsname

  • Facing issue while installing RCU on Linux machine - OIM 11gR2PS1

    Hi All,
         When i start RCU installation first step, i am getting following error :
    [oracle@RHEL6 bin]$ ./rcu
    Failed to initialize logger with location :/home/oracle/Installers/OIM11gR2PS1/RCU/rcuHome/rcu/log/logdir.2013-06-11_22-45/rcu.log
    Initializing logger using the following location :/tmp/logdir.2013-06-11_22-45/rcu.log
    Exception in thread "main" java.lang.UnsatisfiedLinkError: /home/oracle/Installers/OIM11gR2PS1/RCU/rcuHome/jdk/jre/lib/i386/xawt/libmawt.so: libXext.so.6: cannot open shared object file: No such file or directory
            at java.lang.ClassLoader$NativeLibrary.load(Native Method)
            at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1807)
            at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1703)
            at java.lang.Runtime.load0(Runtime.java:770)
            at java.lang.System.load(System.java:1003)
            at java.lang.ClassLoader$NativeLibrary.load(Native Method)
            at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1807)
            at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1724)
            at java.lang.Runtime.loadLibrary0(Runtime.java:823)
            at java.lang.System.loadLibrary(System.java:1028)
            at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
            at java.security.AccessController.doPrivileged(Native Method)
            at java.awt.Toolkit.loadLibraries(Toolkit.java:1605)
            at java.awt.Toolkit.<clinit>(Toolkit.java:1627)
            at com.jgoodies.looks.LookUtils.isLowResolution(LookUtils.java:484)
            at com.jgoodies.looks.LookUtils.<clinit>(LookUtils.java:249)
            at com.jgoodies.looks.plastic.PlasticLookAndFeel.<clinit>(PlasticLookAndFeel.java:135)
            at oracle.sysman.assistants.rcu.ui.InteractiveRCUModel.<init>(InteractiveRCUModel.java:117)
            at oracle.sysman.assistants.rcu.Rcu.execute(Rcu.java:307)
            at oracle.sysman.assistants.rcu.Rcu.main(Rcu.java:363)
    IF you some one has already faced same issue or have any pointer to resolve this issue,please let me know the solution.

    propoerly unzipped the rcu  file.and if still problem remains then try to unzip the rcu in some another drive,may this will resolve the problem.
    regards.
    tp

  • Issues while installing powershell V3.0

    Hello Folks,
    I am facing issues while installing powershell V3.0 on Windows 7 ultimate x64 machine.
    It is throwing error as "The update is not applicable to your 
    computer." when I double click Windows6.1-KB2506143-x64 file.
    Have checked that it have powershell V2.0 builtin in windows 7 and working as expected.
    Have installed .NET framework 4.0 Full, then reinstalled 
    again rebooted machine.
    Have tried with .NET framework 4.5 Full, still issue persists.
    tried below workaround suggested on a forum:
    start /w %SystemRoot%\system32\pkgmgr.exe /ip /m:Windows6.1-
    KB2506143-x64.cab through CMD
    IT returns error as:
    Operation failed with 0x80070003
    The system cant find the path specified
    I am not able to figure out what exactly is going wrong.
    Could someone please jump in to help ?
    Thanks

    Hi RajendraP,
    Please also make sure Windows 7 Service Pack 1 (SP1) must be installed as a prerequisite on computers running Windows 7. To install SP1, go to
    http://windows.microsoft.com/installwindows7sp1
    Windows Management Framework 3.0 requires Microsoft .NET Framework 4.0. You can install Microsoft .NET Framework 4.0 at
    http://go.microsoft.com/fwlink/?LinkID=212547
    If there is anything else regarding this issue, please feel free to post back.
    Best Regards,
    Anna Wang
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Facing issue while deployment on 11.1.1.6 soa server

    Problem Summary
    Facing issue while deployment on 11.1.1.6 soa server
    Problem Description
    We are facing issue while deploying a bpm project over a newly built bps-soa server 11.1.1.6.
    While we are deploying a bpm project, first it is taking around 40mins to create .jar file and then while deploying, it is getting failed with transaction timed out error.
    "composite: Onboarding: javax.ejb.EJBException: Transaction Rolledback.: weblogic.transaction.internal.TimedOutException: Transaction timed out after 301 second".
    we have tried with changing all transaction parameters also like JTA,XA( as similar to our exiting running QA/PROD environment which is on 11.1.1.5) but even then facing the same issue.
    The code were originally build over 11.1.1.5 version, for the first time opening with jdev, code gets migrated and over the upgraded code we did some business specific changes and now trying to deploy over the new server.
    Code is getting successfully compiled and also .jar file is creating properly but while deployment facing error(As shared earlier).
    Also tried to deploy the same .jar file using em consle(to soa-infra) but facing similar issue.
    Error Codes
    Problem Category/Subcategory
    BPM 11g installation issues
    Uploaded Files
    Template Question Responses
    1) ### Product Versions Including Build Numbers ###
    BPM SOA suite 11.1.1.6
    2) ### Is the Issue Reproducible ###
    Yes, mentioned in issue detailes.
    3) ### OS Version ###
    SunOS xxxxx 5.10 Generic_144488-06 sun4v sparc SUNW,T5440
    More logs:
    Name
    === ODM Data Collection ===
    [2013-02-27T01:10:59.436-05:00] [soa_server1] [WARNING] [] [oracle.soa.bpel.engine.deployment] [tid: [STUCK].ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 486af90ee4d37577:-6eb9b41c:13d15783e85:-8000-000000000000142f,1:18454:2] [APP: soa-infra] Unable to obtain the audit metadta java.lang.IllegalStateException: The transaction associated with this transaction-scoped persistence context has been rolled back and as a result, the EntityManager has been closed. No further operations are allowed in this transaction context. Please see the server log for the cause of the rollback.
    [2013-02-27T01:11:17.402-05:00] [soa_server1] [WARNING] [] [oracle.soa.bpel.engine.deployment] [tid: [STUCK].ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 486af90ee4d37577:-6eb9b41c:13d15783e85:-8000-000000000000142f,1:18454:2] [APP: soa-infra] Unable to obtain the audit metadta java.lang.IllegalStateException: The transaction associated with this transaction-scoped persistence context has been rolled back and as a result, the EntityManager has been closed. No further operations are allowed in this transaction context. Please see the server log for the cause of the rollback.
    [2013-02-27T01:11:18.147-05:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.bpel.engine.deployment] [tid: [STUCK].ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 486af90ee4d37577:-6eb9b41c:13d15783e85:-8000-000000000000142f,1:18454:2] [APP: soa-infra] BPEL Component "default/Onboarding!2.0*soa_8130f118-f9b5-462a-8e75-5ec0f34b45bd/Remediation" successfully loaded.
    [2013-02-27T01:11:18.166-05:00] [soa_server1] [ERROR] [] [oracle.soa.bpel.engine] [tid: [STUCK].ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 486af90ee4d37577:-6eb9b41c:13d15783e85:-8000-000000000000142f,1:18454:2] [APP: soa-infra] Unable to activate process Remediation[[
    javax.ejb.EJBException: Transaction Rolledback.: weblogic.transaction.internal.TimedOutException: Transaction timed out after 300 seconds
    BEA1-172EC48037986ACD0C13
    at weblogic.transaction.internal.ServerTransactionImpl.wakeUp(ServerTransactionImpl.java:1788)
    at weblogic.transaction.internal.ServerTransactionManagerImpl.processTimedOutTransactions(ServerTransactionManagerImpl.java:1676)
    at weblogic.transaction.internal.TransactionManagerImpl.wakeUp(TransactionManagerImpl.java:1988)
    at weblogic.transaction.internal.ServerTransactionManagerImpl.wakeUp(ServerTransactionManagerImpl.java:1586)
    at weblogic.transaction.internal.WLSTimer.timerExpired(WLSTimer.java:35)
    at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    ; nested exception is: weblogic.transaction.internal.TimedOutException: Transaction timed out after 300 seconds
    BEA1-172EC48037986ACD0C13
    weblogic.transaction.internal.TimedOutException: Transaction timed out after 300 seconds
    BEA1-172EC48037986ACD0C13
    at weblogic.transaction.internal.ServerTransactionImpl.wakeUp(ServerTransactionImpl.java:1788)
    at weblogic.transaction.internal.ServerTransactionManagerImpl.processTimedOutTransactions(ServerTransactionManagerImpl.java:1676)
    at weblogic.transaction.internal.TransactionManagerImpl.wakeUp(TransactionManagerImpl.java:1988)
    at weblogic.transaction.internal.ServerTransactionManagerImpl.wakeUp(ServerTransactionManagerImpl.java:1586)
    at weblogic.transaction.internal.WLSTimer.timerExpired(WLSTimer.java:35)
    at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    javax.ejb.EJBException: Transaction Rolledback.: weblogic.transaction.internal.TimedOutException: Transaction timed out after 300 seconds
    BEA1-172EC48037986ACD0C13
    at weblogic.transaction.internal.ServerTransactionImpl.wakeUp(ServerTransactionImpl.java:1788)
    at weblogic.transaction.internal.ServerTransactionManagerImpl.processTimedOutTransactions(ServerTransactionManagerImpl.java:1676)
    at weblogic.transaction.internal.TransactionManagerImpl.wakeUp(TransactionManagerImpl.java:1988)
    at weblogic.transaction.internal.ServerTransactionManagerImpl.wakeUp(ServerTransactionManagerImpl.java:1586)
    at weblogic.transaction.internal.WLSTimer.timerExpired(WLSTimer.java:35)
    at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    ; nested exception is: weblogic.transaction.internal.TimedOutException: Transaction timed out after 300 seconds
    BEA1-172EC48037986ACD0C13
    at weblogic.ejb.container.internal.EJBRuntimeUtils.throwEJBException(EJBRuntimeUtils.java:156)
    at weblogic.ejb.container.internal.BaseLocalObject.postInvoke1(BaseLocalObject.java:595)
    at weblogic.ejb.container.internal.BaseLocalObject.__WL_postInvokeTxRetry(BaseLocalObject.java:455)
    at weblogic.ejb.container.internal.SessionLocalMethodInvoker.invoke(SessionLocalMethodInvoker.java:52)
    at oracle.bpm.bpmn.engine.ejb.impl.BPMNServerManagerBean_6gbx7k_IBPMNCubeServerManagerLocalBeanImpl.deployComponent(Unknown Source)
    at oracle.fabric.CubeServiceEngine.load(CubeServiceEngine.java:842)
    at oracle.bpm.bpmn.engine.service.BPMNServiceEngine.load(BPMNServiceEngine.java:636)
    at oracle.bpm.bpmn.engine.service.BPMNServiceEngine.load(BPMNServiceEngine.java:151)
    at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deployComponents(CompositeDeploymentConnection.java:243)
    Caused by: weblogic.transaction.internal.TimedOutException: Transaction timed out after 300 seconds
    BEA1-172EC48037986ACD0C13
    at weblogic.transaction.internal.ServerTransactionImpl.wakeUp(ServerTransactionImpl.java:1788)
    at weblogic.transaction.internal.ServerTransactionManagerImpl.processTimedOutTransactions(ServerTransactionManagerImpl.java:1676)
    at weblogic.transaction.internal.TransactionManagerImpl.wakeUp(TransactionManagerImpl.java:1988)
    at weblogic.transaction.internal.ServerTransactionManagerImpl.wakeUp(ServerTransactionManagerImpl.java:1586)
    at weblogic.transaction.internal.WLSTimer.timerExpired(WLSTimer.java:35)
    at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
    ... 2 more
    FileName
    soa_server1-diagnostic-2.log

    2 things must be noticed:
    First: ODI 11g is not supported by JDK 7, I always use the JDK1.6.0_27 and works fine. When you try to open the ODI Studio, this message appears, telling that ODI is supported only with JDK 6 versions, so don't try to use JDK 7.
    Second: I always install the JDK in a path without spaces, like "C:\JDK1.6.0_27\" and the excatly same thing to odi install files. So I call via Command Prompt:
    C:\ODI_INSTALL\Disk1\setup.exe -jreLoc C:\JDK1.6.0_27\
    I did over 20 windows installations using these settings, it'll work perfectly.
    Regards.
    Luiz Araujo

  • Facing issue while business service in weblogic Env

    Hi All,
    I am facing issue while creating a business service in the application. I have deployed my jar file which contain the XAI service under businessApp,Standalone folder of the app as well as i had placed the generated XML file of mine servicer under the xmlMetaInfo Folder of the app. After bouncing the server and when i am creating the business with the schema provided below i am getting an exception :
    Schema:
    <schema pageAction="read">
    <EMAILID mapField="EMAILID"/>
    <USER_FLG mapField="USER_FLG"/>
    <FIRST_NAME mapField="FIRST_NAME"/>
    <LAST_NAME mapField="LAST_NAME"/>
    <USER_ID mapField="USER_ID"/>
    <PASSWORD mapField="PASSWORD"/>
    <USER_GROUP_1 type="group">
    <userGroup mapField="USR_GRP_ID1"/>
    </USER_GROUP_1>
    <USER_GROUP_2 type="group">
    <userGroup mapField="USR_GRP_ID2"/>
    </USER_GROUP_2>
    <USER_GROUP_3 type="group">
    <userGroup mapField="USR_GRP_ID3"/>
    </USER_GROUP_3>
    <USER_GROUP_4 type="group">
    <userGroup mapField="USR_GRP_ID4"/>
    </USER_GROUP_4>
    <USER_GROUP_5 type="group">
    <userGroup mapField="USR_GRP_ID5"/>
    </USER_GROUP_5>
    <USER_GROUP_6 type="group">
    <userGroup mapField="USR_GRP_ID6"/>
    </USER_GROUP_6>
    <USER_GROUP_7 type="group">
    <userGroup mapField="USR_GRP_ID7"/>
    </USER_GROUP_7>
    <USER_GROUP_8 type="group">
    <userGroup mapField="USR_GRP_ID8"/>
    </USER_GROUP_8>
    <USER_GROUP_9 type="group">
    <userGroup mapField="USR_GRP_ID9"/>
    </USER_GROUP_9>
    <USER_GROUP_10 type="group">
    <userGroup mapField="USR_GRP_ID10"/>
    </USER_GROUP_10>
    <USER_GROUP_11 type="group">
    <userGroup mapField="USR_GRP_ID11"/>
    </USER_GROUP_11>
    <USER_GROUP_12 type="group">
    <userGroup mapField="USR_GRP_ID12"/>
    </USER_GROUP_12>
    <MESSAGE_TEXT mapField="MESSAGE_TEXT"/>
    </schema>
    Exception While creating the business Service :
    SYSUSER - 899645-93-1 2013-02-18 17:17:42,679 [[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] ERROR (service.metainfo.MetaInformationRepository) Service metainfo missing for 'CMUSER5'
    com.splwg.shared.common.LoggedException: Service metainfo missing for 'CMUSER5'
    at com.splwg.shared.common.LoggedException.raised(LoggedException.java:65)
    at com.splwg.base.support.service.metainfo.MetaInformationRepository.privateGetMetaInfoURL(MetaInformationRepository.java:171)
    at com.splwg.base.support.service.metainfo.MetaInformationRepository.buildMetaInfo(MetaInformationRepository.java:183)
    at com.splwg.base.support.service.metainfo.MetaInformationRepository.privateGetMetaInformation(MetaInformationRepository.java:105)
    at com.splwg.base.support.service.metainfo.MetaInformationRepository.getMetaInformation(MetaInformationRepository.java:98)
    at com.splwg.base.support.schema.validation.BusinessServiceSchemaValidator.initialize(BusinessServiceSchemaValidator.java:28)
    at com.splwg.base.support.schema.validation.SchemaValidator.validate(SchemaValidator.java:102)
    at com.splwg.base.domain.common.schema.Schema_CHandler.validateBusinessServiceSchema(Schema_CHandler.java:67)
    at com.splwg.base.domain.common.schema.Schema_CHandler.validateSchema(Schema_CHandler.java:55)
    at com.splwg.base.domain.common.schema.Schema_CHandler.access$000(Schema_CHandler.java:30)
    at com.splwg.base.domain.common.schema.Schema_CHandler$ValidateSchemaDefinitionAsValidXml.validateSave(Schema_CHandler.java:147)
    at com.splwg.base.domain.common.schema.Schema_CHandler$ValidateSchemaDefinitionAsValidXml.validateSave(Schema_CHandler.java:124)
    at com.splwg.base.api.changehandling.AbstractCustomRule.validateSave(AbstractCustomRule.java:86)
    at com.splwg.base.support.changehandlers.ChangeEventHandler.applyRule(ChangeEventHandler.java:300)
    at com.splwg.base.support.changehandlers.ChangeEventHandler.access$300(ChangeEventHandler.java:37)
    at com.splwg.base.support.changehandlers.ChangeEventHandler$2.run(ChangeEventHandler.java:225)
    at com.splwg.base.support.changehandlers.ChangeEventHandler$JumpToChangeHandlerRunner.run(ChangeEventHandler.java:339)
    at com.splwg.base.support.interception.SessionInterceptionManager.notifyGenericCallStackJump(SessionInterceptionManager.java:268)
    at com.splwg.base.support.context.FrameworkSession.notifyGenericCallStackJump(FrameworkSession.java:1473)
    at com.splwg.base.support.changehandlers.ChangeEventHandler.executeValidation(ChangeEventHandler.java:229)
    at com.splwg.base.support.changehandlers.SessionChangeManager.fireSaveValidations(SessionChangeManager.java:223)
    at com.splwg.base.support.changehandlers.SessionChangeManager.processSave(SessionChangeManager.java:204)
    at com.splwg.base.support.context.FrameworkSession.processSave(FrameworkSession.java:1102)
    at com.splwg.base.support.interception.SessionInterceptionManager.saveChangesCalled(SessionInterceptionManager.java:233)
    at com.splwg.base.support.context.FrameworkSession.saveChanges(FrameworkSession.java:1121)
    at com.splwg.base.api.GenericBusinessObject.saveChanges(GenericBusinessObject.java:149)
    at com.splwg.base.support.pagemaintenance.EntityPageMaintenance.add(EntityPageMaintenance.java:121)
    at com.splwg.base.support.pagemaintenance.AbstractPageMaintenance.addItem(AbstractPageMaintenance.java:169)
    at com.splwg.base.support.service.JavaPageAddService.add(JavaPageAddService.java:40)
    at com.splwg.base.support.service.PageAddService.privateAdd(PageAddService.java:95)
    at com.splwg.base.support.service.PageAddService.privateExecute(PageAddService.java:74)
    at com.splwg.base.support.service.PageAddService.execute(PageAddService.java:31)
    at com.splwg.base.api.service.ServiceDispatcher.addItemInSession(ServiceDispatcher.java:218)
    at com.splwg.base.api.service.ServiceDispatcher$2.execute(ServiceDispatcher.java:119)
    at com.splwg.base.api.service.ServiceDispatcher$2.execute(ServiceDispatcher.java:118)
    at com.splwg.base.support.context.SessionExecutable.doInNewSession(SessionExecutable.java:39)
    at com.splwg.base.api.service.ServiceDispatcher.addItem(ServiceDispatcher.java:123)
    at com.splwg.ejb.service.impl.ServiceBean$4.compute(ServiceBean.java:93)
    at com.splwg.ejb.service.impl.ServiceBean$4.compute(ServiceBean.java:92)
    at com.splwg.ejb.service.impl.AbstractServiceBeanInvocationHelper.computeWithTranslatedExceptions(AbstractServiceBeanInvocationHelper.java:25)
    at com.splwg.ejb.service.impl.ServiceBeanInvocationHelper.execute(ServiceBeanInvocationHelper.java:12)
    at com.splwg.ejb.service.impl.ServiceBean.add(ServiceBean.java:91)
    at com.splwg.ejb.service.impl.SPLServiceBean_8o7vtd_EOImpl.__WL_invoke(Unknown Source)
    at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
    at com.splwg.ejb.service.impl.SPLServiceBean_8o7vtd_EOImpl.add(Unknown Source)
    at com.splwg.ejb.service.impl.SPLServiceBean_8o7vtd_EOImpl_WLSkel.invoke(Unknown Source)
    at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
    at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:345)
    at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
    at com.splwg.ejb.service.impl.SPLServiceBean_8o7vtd_EOImpl_1035_WLStub.add(Unknown Source)
    at com.splwg.serviceclient.RemoteServiceDispatcher$4.executeService(RemoteServiceDispatcher.java:79)
    at com.splwg.serviceclient.RemoteServiceDispatcher$4.executeService(RemoteServiceDispatcher.java:78)
    at com.splwg.serviceclient.RemotePageServiceDispatcherHelper.doIt(RemotePageServiceDispatcherHelper.java:19)
    at com.splwg.serviceclient.RemoteServiceDispatcher.add(RemoteServiceDispatcher.java:76)
    at com.splwg.base.web.dataservlet.PageAdd.privateDoPost(PageAdd.java:40)
    at com.splwg.base.web.dataservlet.MutatingPageServlet.doPost(MutatingPageServlet.java:26)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at com.splwg.base.web.services.RequestContextFilter.doFilter(RequestContextFilter.java:50)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    SYSUSER - 899645-93-1 2013-02-18 17:17:42,688 [[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] ERROR (api.service.ServiceExecutionPolicy) Rollback: Add failed
    Please help me out with this issue as it is blocking mine development time.
    Thanks,

    By default, WLP stores policy data such as roles/users/groups in both weblogic server embedded ldap and db to support user entitlements.
    The WebLogic Server embedded LDAP server for a domain consists of a master LDAP server, maintained in the domain’s Administration Server, and a replicated LDAP server maintained in each Managed Server in the domain. I think in your case, the ldap data of admin server and all managed server are not in sync.
    Probably you have checked "Refresh Replica At Startup" - when enabled/checked the embedded LDAP server in a Managed Server will refresh all replicated data at boot time only. That is reason why when you restart the servers, the roles populated from all managed servers.
    For more details see the doc at http://docs.oracle.com/cd/E15051_01/wls/docs103/secmanage/ldap.html#wp1102162

  • I am facing problem while installing iTunes

    I am facing problem while installing iTunes with this error
    "There is problem with you installer package. A program required for this install to complete could not be run."

    Hi Owen,
    I have tried .net Package & Deployment as well as InstallShield 2008. finally i have tried B1DE also. B1DE gives us template only in vb.net but not in C#.net and i want this in c#.net.
    I was trying to understand the code that it creates. I won't be able get the code also.
    I would like to go from other way apart from B1DE.
    Need Urgent Help...

  • An issue while installing oracle 10g express edition on Ubuntu 10.04-64bit

    Hi,
    I'm running into an issue while installing oracle 10g express edition on my Ubuntu 10.04-64 bit installed machine using oracle-xe-universal_10.2.0.1-1.0_i386.deb package. The issue actually came up when I was trying to reinstall the package after uninstalling it due to some problem I had with my login credentials. To elaborate further on it, the /etc/init.d/oracle-xe script does not get created when I execute the debian package and thus i'm unable to configure the required credentials and stuff after the installation. I doubt whether this has something to do with the procedure I followed when uninstalling the previous package it. But what I did was just what's mentioned in the following [http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm] user guide published by oracle.
    Another important clue would be, the platform of my machine is amd64bit although I'm dealing with an installation package preferred for i386. But I believe it's the only thing available in the oracle software download section. Hence I had to use the --force-architecture option to install it. But after reading some post published on this forum, I've figured out that it does not affect the usual execution of the software. Anyway,  I would greatly appreciate some help on this matter.
    [1] http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm
    Thanks and Regards,
    Prabath Abeysekara
    Edited by: 829281 on Jan 18, 2011 7:52 PM

    Hi,
    Finally I've managed to find a solution for this issue. Thanks a lot for all the replies.
    Here's how I got rid of it.
    Addressing all the facts one by one,
    1.The problem of not getting the /etc/init.d/oracle-xe script generated was avoided
    by removing all the configuration files that were previously created while installing
    the product. The following command can be used to accomplish that task.
    *$ dpkg --purge oracle-xe*
    2.Next, Initially the password I used during the configuration process was "admin".
    Although I tried a couple of times installing the product providing the aforementioned
    password, the web UI kept prompting "Invalid Credentials" message not allowing me
    to login. But, this particular issue could be avoided by giving some other simple
    password.
    Finally, got it working and once again thanks a bunch for taking the burden of
    replying this thread.
    Cheers,
    Prabath

  • Facing issue while provisioning to AD which is in multiple domain in single forest

    Hi All,
    I am facing issue while user provisioning to AD which is in multiple domain in single forest.I can Synchronize the OU and Groups from Global Catalog i.e. root domain,but unable to Synchronize OU and Groups from child domains.Following is depict of my domain.
    Root -------   example.com
             |_______doamin1.example.com
             |_______doamin2.example.com
             |_______domain3.example.com
    My global catalog is example.com where I have configure my connector.Following is the snippets of it.
    Parameter
    Value
    ADLDSPort
    BDCHostNames
    Configuration Lookup
    Lookup.Configuration.ActiveDirectory.Trusted
    Connector Server Name
    Active Directory Connector Server
    Container
    DC=example,DC=com
    DirectoryAdminName
    DWPTEST\adm
      DirectoryAdminPassword
    DomainName
    example.com
    IsADLDS
    no
    LDAPHostName
      GlobalCatalog server name  -> where my root domain is present
    SyncDomainController
    SyncGlobalCatalogServer
    GlobalCatalog server name  -> where my root domain is present
    UseSSL
    no
    Above configuration I am using to Synch my OU and Groups using scheduler Job.Following changes I have made in connector configuration.
    1. Set the value of the SearchChildDomains entry to yes in one of the following lookup definitions:
    For trusted source reconciliation: Lookup.Configuration.ActiveDirectory.Trusted
    For target resource reconciliation: Lookup.Configuration.ActiveDirectory
    2. Specify the name of the domain controller that is hosting the Global Catalog Server as the value of the SyncGlobalCatalogServer IT resource parameter.
    For provisioning purpose I am trying to find following configuration which is mentioned in connector document,but unable to locate it.
    In the connector, the referral chasing option is set to All, which means that all referrals are chased when any referral is provided by the domain controller
    Thanks in advance.
    Regards,
    Nitin Natekar

    Hi All,
    Thanks all for the reply.I was not getting an error,but once I changed the connector configuration,It started working. I Kept the LDAPHostName parameter blank  in connector configuration.
    Thanks all for reply
    Regards,
    Nitin Natekar

  • Facing issue while trying to disable automatic discovery of devices through Apple Bonjour

    Hi All,
    I am facing issue while trying to disable automatic discovery of devices through Apple Bonjour.
    Background: Whenever our application is in running state, devices are automatically discovered if it connects to PC. We are using Apple Bonjour's auto discovery technology( mdnsresponder ).
    We are registering a particular service type by using DNS API "DNSServiceRegister". Service type is getting registered properly and we are able to discovered that particular type of device.
    Platform:  Windows 7.0 / MAC 10.8
    Issue:
    But we are facing issue while trying to disable auto discovery of a device programmatically. i.e, unregistered a service reference programmatically from our windows application.
    To unregistered a service we are using "DNSServiceRefDeallocate" DNS API. But looks like it is not working properly.
    Is this DNS API “DNSServiceRefDeallocate” is correct one to unregistered the service?
    Here is the step by step procedure that we are following to de-allocate a service reference:
    1.Browsing / Query a service by using service type to get service reference (DNSServiceRef). 
    2.Get reference socket FD by using DNS API "DNSServiceRefSockFD".  
    3.Select a socket by using "select" API.
    4.Close the socket that we got from step 2 by closesocket().
    5.Delete the service reference by using DNS API "DNSServiceRefDeallocate" and service reference from step 1.
    Are we missing any step to unregistered a service? 
    Regards,
    Goutam

    Original problem I noticed was that regular websites I go to (such as msn) were only partially downloading.  I could see the text on the site but no pictures or videos.  All web surfing was extremely slow.  When I would go to a site such as man I would see another address in the lower left corner for "ads1.msads.net" or "cdn.optimizely.com" that is was trying to connect to. I tried using all three of my browsers (firefox, safari, chrome) and got the same response on all browsers.  After I spent some time researching the issue I decided I probably had a adware/malware problem so I decided to try adwaremedic.com.  I could also not access that site along with thesafemac.com or apple.com.  I was also getting the same response on my other devices (iPhone, iPad, and a mac air).  I could not access any of these sites on any of my devices although I could get to almost any other site although it was very slow.  At that point I decided to unplug the router.  I also did a number of other things before then to try and manually get rid of any adware.  Eventually I got msn back working, apple.com, and the speed was much faster.  But, I still can not access adwaremedic and thesafemac.com.  I could access these on my phone with 3G but not on my wifi.  This is where the problem still stands.  I am sure I still have some adware on my computer and need to find a way to remove it.  I am no techie so the complicated manual fixes are difficult for me to do.

  • Pacman Download DB issues while installing

    Hey,
    So I'm new to any type of Linux, but I thought I'd try arch out since many people recommend end it to me.
    I'm in the install shell from the livecd and whenever I try to pacman -Sy to get the databases, they download full speed for a second then the DL speed just keeps dropping until the download cancels saying that it was too slow (less than 1b per 10secs). I've seen people post similar problems on here but none of their solutions worked for me.
    Any help would be obliged,
    -Cynthia
    (I'm on my phone typing this BTW)
    Last edited by Cynthia (2014-01-16 04:46:34)

    for clarity :
    Are you doing that while booting from the livecd, or booting from the minimal base system installed on your harddrive ?
    If from the hdd : Which guide did you follow for installing and were there network problems during the install ?
    Edit :
    just realised your topic title says issues while installing.
    Are you following https://wiki.archlinux.org/index.php/Beginners%27_Guide or another guide ?
    Last edited by Lone_Wolf (2014-01-16 10:42:16)

  • Error while installing SAP integration kit 3.1

    Hi,
    I installed SAP integration kit 3.1 on one server and it is working fine but when i am installing same installable on another server it is giving error as "Installation ended prematuarly because of an error". I dont know how to debug the error. Please help me.
    Thamnks in advance

    Hi Sonali,
    had a similar problem on a Windows/Tomcat system. The installation was crashing before trying to deploy the .jar files. If you are facing the problem in a similar environment please make sure that you have copied the librfc32.dll and the sapjco.jar files in the correct directories. Especially for sapjco.jar doublecheck the path you have copied the file into.
    Regards,
    Stratos

  • Issue while installing FatWire on weblogic server

    I was trying to install CS with Weblogic as the Application server.
    During the installation of CS, I faced an issue while integrating with LDAP. In log it showed "Could not connect to the application server.Error in creating LDIF file.
    I had given the valid credentials.
    Have anyone faced this issue previously, if so please guide me thorugh.
    And also, Is it mandatory to use LDAP ?
    Thanks,
    Rahul Nair

    It sounds like the application server was turned off whilst you were running the LDAP configuration tool. The tool needs the application server to be running.
    It's not mandatory to have LDAP integration with CS, from what I have seen most existing customers don't use it. There are also some performance benefits to avoiding LDAP integration.
    If you do want LDAP integration then you don't need to configure it immediately after install. The LDAP configuration tool can be run separately, e.g. after you are happy the fresh install is working as expected.
    Phil

  • Issue while installing idm 8.1.1 gateway on 64 bit windows 2008 R2

    Hi
    We have issue in installing idm 8.1.1 gateway on 64 bit windows 2008 R2
    C:\Program Files (x86)\IDM\gateway>gateway -i
    An error occured while trying to install the service: Input/output error
    Sun notes: if you're running 64-bit Windows 2008, you need the JDKTM Version 6 Update 12 and later.
    But this java version should be there in Gateway server(windows 2008) or idm installed server?
    We don't have java installed on gateway server. is this causing issue?
    please let us know
    Thanks

    I may have found a workaround. Can you try to change the "compatibility mode" in 2008 R2 to "Windows XP SP3" and see if it will install?
    Admittedly I have not done this myself so I'm not entirely sure where or how it's done, but I have confirmation it resolves the issue from others who have faced it.
    Edited by: user12611524 on May 2, 2011 5:11 PM

Maybe you are looking for