Facing problem during uploadation of Routing data using CA01-BDC - URGENT
Dear All,
When I am trying to upload Routing data using CA01 in the Table Control scenario, then I am facing problem as my last 2 records are not getting uploaded from my Test file.
For example, I am having 47 records in my Test File and after setting Default size parameters (to avoid screen resolution problem)
I have 15 table control line items data per page. The Page down logic ('=P+') is working fine, but my below BDC code failed to take
the remainder last 2 records from the Test File.
Analysis: When I am running my Call Transaction bdc in foreground, then the 1st page down occurs after 15th record, 2nd page down occurs after 29th record( as in Table Control 1st pages 15th record is coming on the Top of 2nd page). 3rd page down occurs after 43rd record
(as 2nd pages 29th record is coming on the top of 3rd page). In the 4th Table Control Page 43rd record of previous page is coming on top, and then its taking 44th & 45th records from the Test File and then it is triggering SAVE (=BU). Thus, our last 2 records
(i.e. 46th, 47th record) are not getting uploaded in the routing screen from our Test File.
If anybody has encountered this scenario previously, please help me URGENTLY in fixing the bugs here. Its VERY, VERY URGENT
FYI. For others 45 successful records already uploaded, all the screen fields values are coming properly in the routing screen, and here there is no issue.
Thanks very much
Thanks & Regards
Sudipta Project Lead
Volvo Client Location
I am pasting my BDC source code below:
REPORT ZRT1_UPLOAD_CA01_F
NO STANDARD PAGE HEADING
LINE-SIZE 255.
I N C L U D E S *
Include for Data Declarations
INCLUDE zrout_top.
Include for Forms
INCLUDE zrout_form.
INCLUDE zrout_include_f_ca01.
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR <field>
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
Attaching F4 help with filename
PERFORM F1001_GET_F4.
S T A R T - O F - S E L E C T I O N *
START-OF-SELECTION.
Perform to read the input file
PERFORM f_read_file.
Perform to fill the BDC data
PERFORM f_fill_bdctab.
E N D - O F - S E L E C T I O N *
END-OF-SELECTION.
FREE: i_bdcdata,
i_messtab,
i_record.
x----
*& Include ZROUT_TOP *
D A T A B A S E T A B L E S *
TABLES: t100. "Messages
D A T A D E C L A R A T I O N S *
T A B L E T Y P E S *****************************
For input data
TYPES: BEGIN OF ty_record,
matnr(18), "Material Number
werks(4), "Plant
verwe(3), "Usage
statu(3), "Status
arbpl(8), "Work Center
steus(4), "Control Key
ltxa1(40), "Description of Operation
bmsch(13), "Base Quantity
meinh(3), "Unit of Measure
vgw01(11), "Machine
vge01(3), "Unit of measure of activity
END OF ty_record.
I N T E R N A L T A B L E S ***********************
Internal Table for input file name
DATA: i_file_tab TYPE STANDARD TABLE OF sdokpath INITIAL SIZE 0.
Internal Table for BDC Data
DATA: i_bdcdata TYPE STANDARD TABLE OF bdcdata INITIAL SIZE 0.
Internal Table for BDC Messages
DATA: i_messtab TYPE STANDARD TABLE OF bdcmsgcoll INITIAL SIZE 0.
Internal Table for Input file
DATA: i_record TYPE STANDARD TABLE OF ty_record INITIAL SIZE 0.
W O R K A R E A S *************************
Work Area for input file name
DATA: wa_file_tab LIKE sdokpath.
Work Area for BDC Data
DATA: wa_bdcdata LIKE bdcdata.
Work Area for BDC Messages
DATA: wa_messtab LIKE bdcmsgcoll.
Work Area for Input file
DATA: wa_record TYPE ty_record.
V A R I A B L E S ****************************
DATA: v_filename TYPE string,
v_fnam(40) TYPE c.
DATA: wa_opt TYPE ctu_params.
C O N S T A N T S ***************************
CONSTANTS: c_werks TYPE rc27m-werks VALUE 'tp',
c_steus TYPE plpod-steus VALUE 'PP01'.
*Selection Screen.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS:
Input file name
P_FILE TYPE rlgrap-filename OBLIGATORY. " DEFAULT 'C:\'.
SELECTION-SCREEN END OF BLOCK B1.
x----
*& Include ZROUT_FORM *
*& Form f_fill_bdctab
Form to fill the BDC Data
FORM f_fill_bdctab.
TABLES mapl. "Assignment of Task Lists to Materials
DATA: l_cnt_item(3) TYPE n VALUE 1. "Line item counter
DATA: first(3) TYPE n VALUE 16. "Line item counter
DATA: next(3) TYPE n . "Line item counter
DATA: lin(3) TYPE n . "Line item counter
DATA: l_v_bmsch(13), "Base qty
l_v_meinh(3), "Unit of Measure
l_v_vgw01(11), "Machine
l_v_vgw02(11), "Labour
l_v_vge01(3). "Unit of measure of activity
DATA l_v_nextline TYPE sy-tabix.
DATA wa_temp TYPE ty_record.
Initialize Counter
l_cnt_item = 1.
SORT i_record BY matnr.
LOOP AT i_record INTO wa_record.
AT NEW matnr.
REFRESH: i_bdcdata,
i_messtab.
SET PARAMETER ID 'PLN' FIELD space.
SET PARAMETER ID 'PAL' FIELD space.
PERFORM f_bdc_dynpro USING 'SAPLCPDI' '1010'.
PERFORM f_bdc_field USING 'BDC_OKCODE'
'/00'.
Material Number
PERFORM f_bdc_field USING 'RC27M-MATNR'
wa_record-matnr.
Plant
PERFORM f_bdc_field USING 'RC27M-WERKS'
c_werks.
PERFORM f_bdc_field USING 'RC271-PLNNR'
Check if routing already exits for the material
SELECT * FROM mapl
INTO mapl
WHERE matnr EQ wa_record-matnr
AND werks EQ c_werks
AND plnty EQ 'N'.
IF sy-subrc EQ 0.
PERFORM f_bdc_dynpro USING 'SAPLCPDI' '1200'.
PERFORM f_bdc_field USING 'BDC_OKCODE'
'=ANLG '.
ENDIF.
ENDSELECT.
perform f_bdc_dynpro USING 'SAPLCPDA' '1200'.
perform f_bdc_field USING 'BDC_OKCODE'
'=VOUE'.
Group Counter
perform f_bdc_field USING 'PLKOD-PLNAL'
Usage
PERFORM f_bdc_field USING 'PLKOD-VERWE'
'1'.
Status
PERFORM f_bdc_field USING 'PLKOD-STATU'
'4'.
ENDAT.
PERFORM f_bdc_dynpro USING 'SAPLCPDI' '1400'.
Check if page is full
IF l_cnt_item EQ '16'.
Page down
PERFORM f_bdc_field USING 'BDC_OKCODE'
'=P+'.
l_cnt_item = 1.
ELSE.
PERFORM f_bdc_field USING 'BDC_OKCODE'
'/00'.
ENDIF.
CLEAR v_fnam.
Populate item level details
Work Center
CONCATENATE 'PLPOD-ARBPL(' l_cnt_item ')' INTO v_fnam.
PERFORM f_bdc_field USING v_fnam
wa_record-arbpl.
Control Key
CONCATENATE 'PLPOD-STEUS(' l_cnt_item ')' INTO v_fnam.
PERFORM f_bdc_field USING v_fnam
c_steus.
Description of Operation
CONCATENATE 'PLPOD-LTXA1(' l_cnt_item ')' INTO v_fnam.
PERFORM f_bdc_field USING v_fnam
wa_record-ltxa1.
Base Quantity
CONCATENATE 'PLPOD-BMSCH(' l_cnt_item ')' INTO v_fnam.
PERFORM f_bdc_field USING v_fnam
wa_record-bmsch.
Unit of Measure
CONCATENATE 'PLPOD-MEINH(' l_cnt_item ')' INTO v_fnam.
PERFORM f_bdc_field USING v_fnam
wa_record-meinh.
Machine
CONCATENATE 'PLPOD-VGW01(' l_cnt_item ')' INTO v_fnam.
PERFORM f_bdc_field USING v_fnam
wa_record-vgw01.
Labour
CONCATENATE 'PLPOD-VGW02(' l_cnt_item ')' INTO v_fnam.
PERFORM f_bdc_field USING v_fnam
wa_record-vgw02.
Unit of measure of activity
CONCATENATE 'PLPOD-VGE01(' l_cnt_item ')' INTO v_fnam.
PERFORM f_bdc_field USING v_fnam
wa_record-vge01.
l_cnt_item = l_cnt_item + 1.
CLEAR wa_record.
AT END OF matnr.
PERFORM f_bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM f_bdc_field USING 'BDC_OKCODE'
'=BU'.
wa_opt-DISMODE = 'A'.
wa_opt-DEFSIZE = 'X'.
wa_opt-UPDMODE = 'S'.
PERFORM f_bdc_transaction USING 'CA01'.
Initialize Counter
l_cnt_item = 1.
ENDAT.
ENDLOOP.
ENDFORM. " f_fill_bdctab
x----
*& Include ZROUT_INCLUDE_F_CA01 *
*& Form f_read_file
Form to read the file from presentation server
FORM f_read_file .
To get the file name
DATA l_v_file TYPE string.
l_v_file = P_FILE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = l_v_file
filetype = 'ASC'
has_field_separator = 'X'
TABLES
data_tab = i_record
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
ENDFORM. " f_read_file
*& Form f_bdc_dynpro
Form to populate BDC Tab for new screen
-->fp_program Screen program name
-->fp_dynpro Screen Number
Start new screen *
FORM f_bdc_dynpro USING fp_program fp_dynpro.
CLEAR wa_bdcdata.
wa_bdcdata-program = fp_program.
wa_bdcdata-dynpro = fp_dynpro.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO i_bdcdata.
ENDFORM. "f_bdc_dynpro
*& Form f_bdc_field
Insert field *
FORM f_bdc_field USING fp_fnam fp_fval.
IF NOT fp_fval IS INITIAL.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = fp_fnam.
wa_bdcdata-fval = fp_fval.
APPEND wa_bdcdata TO i_bdcdata.
ENDIF.
ENDFORM. "f_bdc_field
*& Form f_bdc_transaction
Call transaction and error handling
-->fp_tcode Transaction code
FORM f_bdc_transaction USING fp_tcode.
DATA: l_mstring(480),
l_color TYPE i,
l_mode TYPE c.
REFRESH i_messtab.
CALL TRANSACTION fp_tcode USING i_bdcdata
OPTIONS FROM wa_opt
MESSAGES INTO i_messtab.
Messages during upload
LOOP AT i_messtab INTO wa_messtab.
CASE wa_messtab-msgtyp.
WHEN 'S'.
l_color = 5.
WHEN 'E'.
l_color = 6.
WHEN 'W'.
l_color = 3.
ENDCASE.
FORMAT COLOR = l_color.
SELECT SINGLE * FROM t100 WHERE sprsl = wa_messtab-msgspra
AND arbgb = wa_messtab-msgid
AND msgnr = wa_messtab-msgnr.
IF sy-subrc = 0.
l_mstring = t100-text.
IF l_mstring CS '&1'.
REPLACE '&1' WITH wa_messtab-msgv1 INTO l_mstring.
REPLACE '&2' WITH wa_messtab-msgv2 INTO l_mstring.
REPLACE '&3' WITH wa_messtab-msgv3 INTO l_mstring.
REPLACE '&4' WITH wa_messtab-msgv4 INTO l_mstring.
ELSE.
REPLACE '&' WITH wa_messtab-msgv1 INTO l_mstring.
REPLACE '&' WITH wa_messtab-msgv2 INTO l_mstring.
REPLACE '&' WITH wa_messtab-msgv3 INTO l_mstring.
REPLACE '&' WITH wa_messtab-msgv4 INTO l_mstring.
ENDIF.
CONDENSE l_mstring.
WRITE: / wa_messtab-msgtyp, l_mstring(250).
ELSE.
WRITE: / wa_messtab.
ENDIF.
FORMAT COLOR OFF.
ENDLOOP.
SKIP.
ENDFORM. " f_bdc_transaction
FORM F1001_GET_F4.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
PROGRAM_NAME = SY-REPID
DYNPRO_NUMBER = SY-DYNNR
FIELD_NAME = P_FILE
CHANGING
FILE_NAME = P_FILE
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
File is not selected
MESSAGE I000 WITH TEXT-M01.
ENDIF.
ENDFORM. " F1001_GET_F4
Sudipta,
Would request you to post this to ABAP-Forum for Immediate response.
I had this problem, but the ABAP guy did something to correct this...it was more of screen resoultion difference between the recorded system and uploading system. Please try to use the same system which was used to record and try.
Regards,
Prasobh
Similar Messages
-
Problem in uploading material master data using BAPI?
Hi all,
I am using BAPI_MATERIAL_SAVEDATA to upload materail master data. Here i have to pass moving average price values in two currenices(using account_view and valuationdata in BAPI). But i found only one field for moving average price i.e moving_pr in valuationdata.
Please help me on how to upload the moving average price in two currencies?
Thanks,
Aravind.Hi
There is function module BAPI_MATERIAL_SAVEREPLICA where
VALUATIONDATA parameter is in the tables tab.
But I didn't test it. Try, may be it works as you need. -
Problem in uploading material master data using BDC?
Hi all,
I am using BDC call transaction method to upload material data. Here i am facing a problem that a value in the flat file is going to the wrong screen field . But my recording done properly.
In recording, after entering the data in the view BASIC DATA1 and trying to enter the text . For this i need to scroll down the scroll bar and after that i am clicking on basic data text and entering the text. Here i am not touching the languge field.
But the problem is the text to be entered into the basic data text is storing in language and giving error.
Please help me by specifying the reason and solution for this problem? Whether i did any mistake in recording in scrolling?
Thanks,
Vamshi.Hi
Go with BAPI for such huge transactions and screens. Use BAPI: BAPI_MATERIAL_SAVEDATA.
Regards,
Vishwa. -
Facing problem in converting string to date using getOANLSServices()
I am trying to set a value for date field in my vo and trying to insert into the table.
In controller I am getting the String which has a date:
ex: String date="01-NOV-2007";
while setting into the row I need to convert into Date but it is returning null.
The below code I used
to convert into date :
Date dt = new Date(getOADBTransaction().getOANLSServices().stringToDate(date));
But this dt is returning a null value is there any solution please advise me.
Regards!
SmarajeetSmarajeet ,
See this thread, in one of my replies i have mentioned how to convert string to java.sql.date.You can use the same for oracle.jbo.domain.Date.
urgent!How to set the default selected date for an OAMessageDateFieldBean
--Mukul -
Problem in uploading HR master Data from excel
Hello
When I am uploading HR master data using excel , I get the error
"Error in info type 0006 and emp no 00000016 with msg id 00 no. 055 msg Fill in all required entry fields "
I have filled in the following fields for infotype 0006:-
SUBTY ='1'
ANSSA = '1'
STRAS , LOCAT ,ORT01, STATE , PSTLZ , LAND1, TELNR.'
But I am getting the error for filling the required entry fields.
I am using The function module HR_MAINTAIN_MASTERDATA.
If anyone has an idea...about the problem, please writeNo work schedule rule for key 1 0501NORM 20090101 ###
This type of error is a functional one . It simply means you are trying to feed the field with value which is not acceptable (here work schedule does not exist for specific key). Either contatct your functional collegue to check the configuration or change the provided data.
Also as Bala noticed you should always check if relevant record is allowed to be entered directly in PA30. Make sure all required fields are provided too.The best is to either enter it manually or use SHDB to record this entry and get technical field names. You then know which fields you need to provide in order to create a correct entry.
Regards
Marcin -
How To... Update Master Data during upload of transaction data
Can anybody let me know how this can be achieved.
I have datasource (Legacy not R3) where I am getting both master data and text for number of infoobjects.
I dont want separate datasources.
The datasource is actually transactional datasource.
I dont need text in the cubes or DSO I need the text tables of the infoobjects to be updated.
I could find this on SDN but do anyone have document based on the below link.I was not able to find it.
How To... Update Master Data during upload of transaction data
Thanks.Dear Praveen
I guess yr req is demanding the knowledge of Data Unification and Synchronization whose scope is a bit outer the area of BW.( its MDM actually )
In BW we could very well fetch data out of different data sources (even across the different system) with no issues so why not u trying that. if there is any issue implementing that then please specify what kind of trouble you are interfacing...
I got the below link which may be helpful
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e7bd6389-0a01-0010-eb95-d45835d446a8 -
Doubt in uploading purchase order data using BDC
Hi friends,
how to upload purchase order data.
1) In both BDC and BAPI which one is preferable?
2) for suppose if it is through BDC, how to use? what are the transactions that we can use(SHDB, ME21N,ME21)?
3) To execute the job in background, is it possible for both call transaction and session method.
Thanks in advance
Sreenivas kIt really depends on the number of records you have. Still for a set of 5,000 records my answer to your questions will be:
1) In both BDC and BAPI which one is preferable? - <b>Go with BDC</b>
2) for suppose if it is through BDC, how to use? what are the transactions that we can use(SHDB, ME21N,ME21)? - <b>Yes, its SHDB for recording, SE38 for abap program and ME21 for PO. Avoid SAP Enjoy transactions for recording as you may end up having problems wiht it.</b>
3) To execute the job in background, is it possible for both call transaction and session method. - <b>If you use call transaction method then you have to schedule the job to run in background or simply run it through F9 instead of F8. In case of session method you can chose to process the session in background. However I would suggest you go with BDC Session method for this.</b>
- Guru
Reward points for helpful answers -
Hi,
I tried to upload the BP data in one of the databases using DTW.
I was able to upload the masters successfully but was not able to upload the bill to and ship to addresses for the BP data.
Data which had special characters like , or hyphen appeared with double quotes, how can this be corrected?
JyotiYes, I am...
Is there an issue with the address type field value...?
I have been using "bo_BillTo" for billing address and for Shipping addresses "bo_ShipTo"...is this correct...?
I have also noticed that there are some values for which the "System Information" shows as exact input values, however the values or input required for those columns are completely different.
For e.g. column called "VATStatus" in the BP template, there are two options available, "Liable" or "Exempt".
The value to be inserted in this column for the former is "vliable" at the time of import...
How can we determine what to input for the latter?
Hope you understand my question... -
Upload Of Transaction Data Using E-CATT
Dear All,
I am trying to upload purchase order Data for transaction ME21 through E-catt. But I am not able to upload multiple line item data as the Test Script allows only one item data to be uploaded because I have uploaded only one item data in my recording. So I am not able to upload multiple line item data. Can anybody help me with the steps to upload multiple line item data for ME21 transaction through E-CATT.Hi,
Did you solve this problem of uploading more than 1 line item? If you have solved, please share me your solution as Im also encountering the same problem. Thanks in advance for your help! -
AC02 - Problem in uploading Long text data
Hi All,
I record a BDC for AC02 tcode and i am able to upload all the data in AC02 tcode except long text. How can I upload this, kindly suggest.
Thanks and Regards,
Rajesh VasudevaHi,
Check the below threads.It could be helpful to you.
LONGTEXT: MATERIAL - PRUE
problem with long text
Cheers,
Hakim -
Getting error while uploading gl master data using LSMW batch input data
Hi Experts,
I am getting error while uploading the GL master data through lsmw using batch input recording.
After completion of all steps at the time of running batch input session error i am getting is "maintain EN language discription"
and Pls tell me is it possible to upload transactional data using lsmw? if yes pls explaing briefly.Hello,
Kindly post in the FI forum to get a better response.
Regarding the issue you might check whether the correct column is being picked up where you have maintained the description.
Kind Regards // Shaubhik -
Problem during uploading data Using BDC
While I'm trying to upload data for T.Code J1IS using BDC, Value for the field Net.***.value ( J_1IASSVAL-J_1IVALNDP) is not getting populated on the screen.
Pls help.Hi,
This is a Currency Field so you need to pass this to a Char field first and then pass to BDCTAB-FVAL.
" This is a common problem with BDC with other data types even with Date and Quantity and Numeric types
Please note while passing values to BDCTAB all the values should be passed in CHAR form only
Cheerz
Ram. -
Facing problem during file upload
hi
we r designing a portal where it is required to upload files based on individual users who have logged in.
For this purpose we r using a file field in one page and http upload tag in another page.
The file uploads successfuly to the database, but the problem is that we r not able to get the value of pReq.getUser() in the page where the httpfileupload tag exists.
we noted that request.getParameter() and session.getValue() is also not valid in this page.
we also tried setting the session value to true in provider.xml. Even this didnt work.
we noted that this problem comes only when the file field is used. can anyone tell me how to solve this??
Thanks in advance.
voyagerrequest.getParameter() nor session.getParameter() does not fetch anything. the value is null
Regards,
voyager -
Facing Problem while Debugging a custom report using LDB
Hi Gurus,
I have requirement to modify a custom report program related to FI. This program used Logical database ZDF ( Copied original DDF) for data fetching.
when i am trying to see the data in debugging mode, its not allowing to check in start-of-selection event. only in the initialization & end-of-selection i could able to debug.
when i put breakpoint in initialization, it is allowing to see the flow till a Get Event occurs in the code, once a Get event occur the debugger is coming out and displaying the report.
If anybody faced this kind of problem when debugging a report using LDB, please share how you resolved it. If there are any other ways to debug a program of this kind please help me.
Thanks,
NandaHi Amith,
I checked that way also, i put break point in database program of the copied LDB, but its not allowing to check the flow in that program also.
Please suggest any other ways.
Thanks,
Nanda -
Problem , during creation of routing ...
Hi all ,
actually , when I'm creating routing - faced a problem - that , message display " this sampling procedure only suitable with SPC characteristic"
Message no. QD247 ....
I guess , may be while creating sampling procedure for routing , and then assignment with control chart , where the problem has been rooted .
Actually , I don't know what type control chat should be assigned with std. sampling procedure for routing for WM - PP interface .
why this problem is getting displayed and how could it be solved ?
thanks in advance
regards
arghyaHello Arghya,
From the screen shot 1 it seems that the Sampling procedure which you are assigning to MIC in routing is created with SPC criterion. But the MIC to which you are trying to assign does not have SPC characteristic tick active in its control indicator.
First you need to decide whether you really want to carry out SPC study for this MIC or not.
If Yes - Then in control indicators of this MIC tick on SPC characteristic and in sampling procedure use SPC as criterion under valuation mode drop down. You may choose suitable Xbar chart for this with due discussion with business users; what type of chart they want.
If Not - Then simply do not tick SPC characteristic check-box in control indicators and create sampling procedure as you have shown in 2nd screen shot except control chart.
Anand
Maybe you are looking for
-
Running a NetBeans 5.5.1 GUI in Java 1.5?
Hi everyone, thanks for your interest. I've created a GUI in NetBeans 5.5.1 using the Group Layout package, which is included in Java 1.6. The only problem is I need this app to run in a Java 1.5 environment. I'm not an expert at this but after exten
-
Installing Flash Player on Windows 2000
Thanks to numerous past discussions, methods have been found for installing Flash Player 11.2.202.235 on Windows 2000. See this thread, which explains how to use HxD Hex Editor to make a simple change that will allow installation on Windows 2000: htt
-
Hey... I got all my music transfered to my new ipod touch on a PC that I don't have access to anymore.. And now I downloaded Itunes to a different PC that i can use and I wanna Transfer my music from my ipod to my itunes but just don't know how!!!! I
-
How to send a mail to the user when a job gets canceled?
Hi experts, I need to send a mail when a job gets canceled to the user.I know the FM for sending mail and i can find if a job is canceled from tbtco,but i want to know how to send the mail from the same program ,once it got canceled
-
Nokia MD-51W JBL PlayUp only works with old device...
I've got this portable speaker and have used it for a while with an older Bluetooth 2.1 + EDR enabled phone, now switching to newer phone and the speaker connects, but no sound coming out of the speaker. Tried with various Bluetooth 3+ devices like H