Facing problem in configuring mail server in BAM server

Hi All,
I want to configure my BAM server to be able to send emails. For that I made the required changes in Email Driver Properties in usermessagingdriver-email(bam_server). Also I made the following changes in BAM Server Properties in OracleBamServer(bam_server):-
Application URL : http://<server ip>:<bam_server1 port>
Outbound Email Account: ****@<host name of the mail server>
and Data Source JNDI for BAM
Do I need to configure more changes and if then could anyone please tell me what other configuration has to be made in order to send emails from my BAM server.
Thanks in Advance

Thanks,
But can you tell me where cam I make the changes in the property like AlertActionAllowExternalEmails = true. I am ot able to find it out.

Similar Messages

I am facing problem when configuring listener.ora and tnsnamess.ora in listener side it is showing The listener supports no services The command completed successfully and in when i cross check with listener from tns it is showing the error

i am facing problem when configuring listener.ora and tnsnamess.ora in listener side it is showing The listener supports no services The command completed successfully and in when i cross check with listener from tns it is showing the error
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
here is my listener file
lsn =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
      (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.125.128)(PORT = 1575))
#ADR_BASE_LISTENER = /u01/app/oracle
(SID_LIST_LISTENER=
(SERVICE_NAME=kull)
(ORACLE_HOME=/u01/app/oracle/product/11.2.0/db_1)
tnsnames.ora
to_lsn=
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = server1)(PORT = 1575))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = kull )
my database name is kull
please somebody help

Biswaranjan wrote:
i have two database one is kull and another is kk
i configured listener.ora in kull
and tnsnames.ora in kk
when i am running lsnrctl start listener in database kull
This makes no sense. You don't configure a listener nor a tnsnames.ora "in a database".   I hope this is just a language issue and not reflective of a fundamental misunderstanding of how tns works.
read: http://edstevensdba.wordpress.com/2011/02/09/sqlnet_overview/ Help! I can’t connect to my database
read: http://edstevensdba.wordpress.com/2011/02/16/sqlnet_client_cfg/ Help! I can’t connect to my database (part duex)
it is showing the message
Alias                     lsn
Version                   TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date                05-JUL-2013 19:08:06
Uptime                    0 days 0 hr. 0 min. 0 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
Listener Log File         /u01/app/oracle/product/11.2.0/db_1/log/diag/tnslsnr/server1/lsn/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1575)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=server1)(PORT=1575)))
The listener supports no services
The command completed successfully
and in another database in kk when i am giving the command tnsping to_lsn
it is giving this message
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = server1)(PORT = 1575)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = kull)))
OK (0 msec)
but when i am cross check sqlplus system/manager@ to_lsn
it is giving the following error
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor

FAcing problems in configuring multiple macs(imac and mac book) pro) on time capsule

FAcing problems in configuring multiple macs(imac and mac book)

You may find these links useful:
http://pondini.org/TM/Time_Capsule.html
http://pondini.org/TM/4.html
Ciao.

HT1937 i have just downloaded a new version of Iphone software on my iphone 3 . but i'm facing problem in configuring it . also tried to configure it with itunes but it always says that there's no sim card in your phone and previously i was using same sim

i have just downloaded a new version of Iphone software on my iphone 3 . but i'm facing problem in configuring it . also tried to configure it with itunes but it always says that there's no sim card in your phone and previously i was using same sim without any problem . need solution . kindly help .

Hello ashharuddin,
Thank you for using Apple Support Communities.
For more information, take a look at:
iPhone: Troubleshooting No SIM
http://support.apple.com/kb/ts4148
Toggle Airplane mode On and Off.
Try turning iPhone off and then on again.
Check for a carrier settings update. Tap Settings > General > About. If an update is available, a prompt will appear.
Remove the SIM Card and verify that it is a valid, carrier-manufactured SIM. Also verify that it is not damaged, worn, or modified. Then reinsert it.
Restore the iPhone.
Have a nice day,
Mario

Facing problem in configuring in IIS server

Dear all,
I am trying to configure my oracle application developed in form6i in IIS server making 3 teir arch.
SO please here i am facing problem to do it.
So kindely guide me .
thanks & regards.

Thanks,
But can you tell me where cam I make the changes in the property like AlertActionAllowExternalEmails = true. I am ot able to find it out.

Where can I configure mail quotas in Lion Server?

One (minor) problem for me, after upgrading from SnowLeopard Server to Lion Server is the fact, that I can't figure out where to administer the mail quotas. So far I have just managed to find the "Server Admin". Here, under Mail -> Maintenance I can see the quotas and under Mail->Settings->Quotas I can enable quota warnings and edit them. But I can't find a place to configure individual quotas. The quota settings from SnowLeopard server have been migrated and are still in place. But how should I change them. It used to be in WorkgroupManager. But in WorkgroupManager this item is gone.
Many thanks for your replies.

Followng up a bit,
In looking into OD records on my Snow Leopard Server via the Inspector in WGM, I see the following attribute for one of my users for whom I've set a 1024mb mail quota.
Name:
MailAttriute
Value:
<?xml version="1.0" encoding="UTF-8"?>
<dict>
          <key>kAPOPRequired</key>
          <string>APOPNotRequired</string>
          <key>kAltMailStoreLoc</key>
          <string></string>
          <key>kAttributeVersion</key>
          <string>Apple Mail 1.0</string>
          <key>kAutoForwardValue</key>
          <string></string>
          <key>kIMAPLoginState</key>
          <string>IMAPAllowed</string>
          <key>kMailAccountLocation</key>
          <string>[redacted].[redacted].org</string>
          <key>kMailAccountState</key>
          <string>Enabled</string>
          <key>kPOP3LoginState</key>
          <string>POP3Allowed</string>
          <key>kUserDiskQuota</key>
          <string>1024</string>
</dict>
I'm wondering if manually entering this attribute, and an XML value with at least the kUserDiskQuota key included will be all I need to do to implement per-user quotas in Lion Server.
If I get time, I will test and report back.

Problem while configuring webutil on oracle application server 10g(9.0.4)

hi,
I have configured webutil with oracle application server 10g(9.0.4).JInitiator 1.3.1.17 is installed.
I did everything according to webutil manual.Then i developed a form using developer suit 10g (9.0.4).
and successfully compiled and attached webutil library.then i subclass
webutil object group from webutil.olb into my form,that is also
subclassed successfully.Form has also been compiled and saved
successfully.
also configured my formsweb.cfg,forms90.conf,default.env according to webutil documentation.
{color:#993366}Now when i run this form from client, it does not show form in the
browser and shows a message on the client browser console as follows{color}.
{color:#0000ff}*Applet oracle.forms.webutil.common.RegisterWebUtil*
{color} {color:#993366}After this message,It does nothing and if i refresh browser,it shows following message in the browser' Console.{color}
{color:#0000ff}*Applet oracle.forms.engine.Main notinited.*{color}
Note:In the browser ,loading java applet is also visible.
how should i resolve this problem?
any suggestion?
Its urgent.
Regards,
abbasyazdani

Refer this metalink note,
566628.1 How To Install Webutil on 10g Oracle AS
[email protected]

Problem in configuring mail services

Hello all,
I am configuring my system for automated mail sending.
WebDynpro provides functionality to incorporate such services.
I have followed WebDynpro guidelines for creating a mail service, but while entering WSDL description as
http://webservices.matlus.com/scripts/emailwebservice.dll/wsdl/IemailService
it gives error saying , please enter proper WSDL.
I also tried to download the same WSDL on local machine and pass it as a parameter. But while compiling some classpath error appears.
Please guide me on that.

Hi,
As you can see the wdsl file in the browser when you type the URL, I don't think it is a problem with the URL.
To check if it is the problem with the NetWeaver Studio you can check it with a web service in the local machine or the server. I think there are some examples webservices like car rental services that come with the installation.
From what I learnt from one of my senior is that it might be a problem due to the proxy connection that you use to connect to the internet. Please verify if the proxy allows you to use the web service.
Regards
Noufal

Problems on sending mail on Websphere Application Server Community Edition

Hi, i am using the following class for sending mail:-
/**This class encapsulates mailing to any person. it defines method that takes parametres
* such as mail server address,sender and recipient address, userid and password of the
* SMTP account
package src;
import java.util.*;
import javax.mail.*;
import javax.mail.internet.*;
public class Mailer extends javax.mail.Authenticator{
/** The javamail session object. */
protected Session session;
/** The sender's email address */
protected String from;
/**the Username of the account used for authentication*/
protected String user;
/**The password of the mail account*/
protected String password;
/** The subject of the message. */
protected String subject;
/** The recipient ("To:"), as Strings. */
protected ArrayList toList = new ArrayList( );
/** The CC list, as Strings. */
protected ArrayList ccList = new ArrayList( );
/** The BCC list, as Strings. */
protected ArrayList bccList = new ArrayList( );
/** The text of the message. */
protected String body;
/** The SMTP relay host */
protected String mailHost;
/** Get from */
public String getFrom( ) {
return from;
/** Set from */
public void setFrom(String fm) {
from = fm;
/** Get username */
public String getUser( ) {
return user;
/** Set username */
public void setUser(String us) {
user=us;
/** Set password*/
public void setPassword(String password){
    this.password=password;
/**Get Password*/
public String getPassword(){
    return password;
/** Get subject */
public String getSubject( ) {
return subject;
/** Set subject */
public void setSubject(String subj) {
subject = subj;
// SETTERS/GETTERS FOR TO: LIST
/** Get tolist, as an array of Strings */
public ArrayList getToList( ) {
return toList;
/** Set to list to an ArrayList of Strings */
public void setToList(ArrayList to) {
toList = to;
public void setToList(String s) {
toList = tokenize(s);
/** Add one "to" recipient */
public void addTo(String to) {
toList.add(to);
// SETTERS/GETTERS FOR CC: LIST
/** Get cclist, as an array of Strings */
public ArrayList getCcList( ) {
return ccList;
/** Set cc list to an ArrayList of Strings */
public void setCcList(ArrayList cc) {
ccList = cc;
/** Set cc as a string like "tom, mary, robin@host". Loses any
* previously-set values. */
public void setCcList(String s) {
ccList = tokenize(s);
/** Add one "cc" recipient */
public void addCc(String cc) {
ccList.add(cc);
// SETTERS/GETTERS FOR BCC: LIST
/** Get bcclist, as an array of Strings */
public ArrayList getBccList( ) {
return bccList;
/** Set bcc list to an ArrayList of Strings */
public void setBccList(ArrayList bcc) {
bccList = bcc;
/** Set bcc as a string like "tom, mary, robin@host". Loses any
* previously-set values. */
public void setBccList(String s) {
bccList = tokenize(s);
/** Add one "bcc" recipient */
public void addBcc(String bcc) {
bccList.add(bcc);
// SETTER/GETTER FOR MESSAGE BODY
/** Get message */
public String getBody( ) {
return body;
/** Set message */
public void setBody(String text) {
body = text;
/** Check if all required fields have been set before sending.
* Normally called e.g., by a JSP before calling doSend.
* Is also called by doSend for verification.
public boolean isComplete( ) {
if (from == null || from.length( )==0) {
System.err.println("doSend: no FROM");
return false;
if (subject == null || subject.length( )==0) {
System.err.println("doSend: no SUBJECT");
return false;
if (toList.size( )==0) {
System.err.println("doSend: no recipients");
return false;
if (body == null || body.length( )==0) {
System.err.println("doSend: no body");
return false;
if (mailHost == null || mailHost.length( )==0) {
System.err.println("doSend: no server host");
return false;
return true;
public void setServer(String s) {
mailHost = s;
/** Send the message.
public synchronized void doSend( ) throws MessagingException {
if (!isComplete())
throw new IllegalArgumentException("doSend called before message was complete");
/** Properties object used to pass props into the MAIL API */
Properties props = new Properties( );
props.put("mail.smtp.host", mailHost);
props.put("mail.smtp.user",user);
props.put("mail.smtp.auth", "true");
if (session == null) {
session = Session.getDefaultInstance(props,null);
// create a message
final Message mesg = new MimeMessage(session);
InternetAddress[] addresses;
// TO Address list
addresses = new InternetAddress[toList.size( )];
for (int i=0; i<addresses.length; i++)
addresses[i] = new InternetAddress((String)toList.get(i));
mesg.setRecipients(Message.RecipientType.TO, addresses);
// From Address
mesg.setFrom(new InternetAddress(from));
// CC Address list
addresses = new InternetAddress[ccList.size( )];
for (int i=0; i<addresses.length; i++)
addresses[i] = new InternetAddress((String)ccList.get(i));
mesg.setRecipients(Message.RecipientType.CC, addresses);
// BCC Address list
addresses = new InternetAddress[bccList.size( )];
for (int i=0; i<addresses.length; i++)
addresses[i] = new InternetAddress((String)bccList.get(i));
mesg.setRecipients(Message.RecipientType.BCC, addresses);
// The Subject
mesg.setSubject(subject);
// Now the message body.
mesg.setText(body);
// Finally, send the message!
new Thread( ) {
public void run( ) {
try {
String protocol = "smtp";
   Transport t = session.getTransport(protocol);
    try {
        t.connect(mailHost,user,password);
        t.sendMessage(mesg,mesg.getAllRecipients());
    } finally {
        t.close();
} catch (MessagingException e) {
throw new IllegalArgumentException(
"Transport.send() threw: " + e.toString( ));
}.start( );
/** Convenience method that does it all with one call. */
public static void send(String mailhost,String recipient, String sender,String user,String password, String subject, String message) throws MessagingException {
Mailer m = new Mailer( );
m.setServer(mailhost);
m.addTo(recipient);
m.setFrom(sender);
m.setUser(user);
m.setPassword(password);
m.setSubject(subject);
m.setBody(message);
m.doSend( );
/** Convert a list of addresses to an ArrayList. This will work
* for simple names like "tom, [email protected], 123.45@c$.com"
* but will fail on certain complex (but RFC-valid) names like
* "(harish, munish) <[email protected]>".
* Or even "Ian Darwin <[email protected]>".
protected ArrayList tokenize(String s) {
ArrayList al = new ArrayList( );
StringTokenizer tf = new StringTokenizer(s, ",");
// For each word found in the line
while (tf.hasMoreTokens( )) {
// trim blanks, and add to list.
al.add(tf.nextToken().trim( ));
return al;
}Then i am using the following code snippet in a servlet to send mail by using the static send function of the above class.
try {
            src.Mailer.send("smtp.mail.yahoo.co.in","[email protected]","[email protected]","gaurav_s_pandey","tinGSPyahootin","Subject of Servlet Mail","This is the mail sent by servlet run on geronimo");
            out.println("Request sent Successfully!!!");
        } catch (MessagingException ex) {
            out.println("Error Sending Request!!! Check Network Settings!!!");
        }My problem is that it is not working on Websphere ApplicationServer Community Edition ,but the same code and servlet is running and sending mails as desired on Apache Tomcat...
Can some one help me plzzz as i have to make it run on WAS CE only and not tomcat....

You didn't say anything about what exactly "not working" means.
Some details would help debug the problem.
My understanding is that WebSphere Community Edition is essentially just
Apache Geronimo. I believe Geronimo has its own version of JavaMail that
might not work as well as the Sun version that is usually included with Tomcat.
If that's the source of the problem, you'll need to ask for help in the Geronimo
support forum.

Configuring Mail on iPad, "POP server is not responding"

Just bought my ipad last week and ive been trying to configure my email account (Live), but it just doesn't seem to work.
I select 'other' and follow the steps, but then a pop up appears saying "Cannot Connect Using SSL" --> Do you want to setup without SSL, yes/no? Selecting no, cancels the setup and selecting yes brings up another pop up, "POP server 'pop3.live.com' is not responding. Check your network connection and that your entered information is correct in the ;Incoming Mail Server; field.
If i click ok after that 2nd popup, i can save my settings but the password is blank and when i re-enter the password the same pop up appears.
Thank you for help in advance.

It works fine and then after the final step i click save... then it brings me to mail and it says Password Incorrect, Enter the password for the exchange account 'Live".. but i'm positive ive entered the password right, ive entered it so many times.
not sure if this is relevant, but it works perfectly on my iphone?

Newbie trying to configure mail sevice on osx server 10.3.9

Hello,
I have read all posts which appear to deal with the issues I'm having and have tried several of the suggestions, but I am still unable to receive mail on my Mac OSX 10.3.9 server. Here is my postconf -n:
postconf -n
always_bcc =
command_directory = /usr/sbin
config_directory = /etc/postfix
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
inet_interfaces = all
luser_relay =
mail_owner = postfix
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mapsrbldomains = dun.dnsrbl.net
messagesizelimit = 5242880
mydestination = $myhostname,localhost.$mydomain,mail.patrickwgill.com,patrickwgill.com,smtp.pat rickwgill.com
mydomain_fallback = localhost
myhostname = www.patrickwgill.com
mynetworks = 127.0.0.1/32,192.168.0.103/32,$myhostname,localhost.$mydomain,localhost
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
relayhost =
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdclientrestrictions = rejectmapsrbl
smtpdenforcetls = no
smtpdpw_server_securityoptions = login
smtpdrecipientrestrictions = permitsasl_authenticated,permit_mynetworks,reject_unauthdestination,permit
smtpdsasl_authenable = yes
smtpdtlsloglevel = 0
smtpduse_pwserver = yes
smtpdusetls = no
unknownlocal_recipient_rejectcode = 450
I am also unable to send mail. Here is my telnet reply per one of the posts I read:
telnet mail.patrickwgill.com smtp
Trying 24.59.104.187...
Connected to mail.patrickwgill.com.
Escape character is '^]'.
220 www.patrickwgill.com ESMTP Postfix
I need help with this because I'm afraid that mail bouncing back is causing major problems for me with clients and vendors. Thank you for any assistance...
17'' Powerbook Mac OS X (10.3.9)

Hello again,
I have tried sending messages from my webmail account in another domain and get the following reply:
This is the Postfix program at host www.patrickwgill.com.
I'm sorry to have to inform you that the message returned
below could not be delivered to one or more destinations.
For further assistance, please send mail to <postmaster>
If you do so, please include this problem report. You can
delete your own text from the message returned below.
The Postfix program
<[email protected]>: Command time limit exceeded:
"/usr/bin/cyrus/bin/deliver"
Reporting-MTA: dns; www.patrickwgill.com
Arrival-Date: Sun, 8 Jan 2006 14:05:25 -0500 (EST)
Final-Recipient: rfc822; [email protected]
Action: failed
Status: 5.0.0
Diagnostic-Code: X-Postfix; Command time limit exceeded:
"/usr/bin/cyrus/bin/deliver"
So, it appears to be just hanging for some reason and timing out. Any ideas? I really appreciate your help.

How to configure mail on mac mini server?

I have a new Mac Mini Server ver 2.0.23 I have web access and can see my server from the web going to my site but the stopping block is email services.
I have one ip for www and one for mail.mydomain.com and I have all of the firewall ports open (I think on my router 22, 110, 143). Please advice what the poper settings are and how via the web I am to access the email.
Thank you in advance for your consideration.
Jeff

You will get better results on server questions in the OS X Server forum.

Facing problem in installing oracle 9i on 2003 server

hi all
i am getting the following problem while installing oracle 9i on windows 2003 server.
my system is haveing 3 more JRE s 1.4 and above installed as part of others softwares.
error log i am getting is like this-
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION occurred at PC=0xa272c7d
Function name=Java_W32LocateSidNative_w32LocateSidHome
Library=D:\temp\OraInstall2006-08-24_11-39-01AM\SID_Queries.dll
Current Java thread:
at W32LocateSidNative.w32LocateSidHome(Native Method)
at getAllOracleHomes.performQuery(getAllOracleHomes.java:39)
at oracle.sysman.oii.oiis.OiisCompContext.doQuery(OiisCompContext.java:2330)
at Components.oracle.emprod.oemagent.agentca.v9_2_0_1_0.CompContext.getCalculatedValueObject_PRE_REQUISITE(Unknown Source)
at Components.oracle.emprod.oemagent.agentca.v9_2_0_1_0.CompContext.getCalculatedValueObject(Unknown Source)
at oracle.sysman.oii.oiis.OiisCompContext.getCalculatedValue(OiisCompContext.java:612)
at oracle.sysman.oii.oiis.OiisPreRequisiteVar.getCalculatedValue(OiisPreRequisiteVar.java:138)
at oracle.sysman.oii.oiis.OiisVariable.setVariable(OiisVariable.java:1353)
at oracle.sysman.oii.oiis.OiisCompInstallation.getPreRequisite(OiisCompInstallation.java:683)
at oracle.sysman.oii.oiis.OiisCompInstallation.getContext(OiisCompInstallation.java:368)
at oracle.sysman.oii.oiio.oiiod.OiiodDepEngine.checkPreReq(OiiodDepEngine.java:4496)
at oracle.sysman.oii.oiio.oiiod.OiiodDepEngine.applySelection(OiiodDepEngine.java:2793)
at oracle.sysman.oii.oiio.oiiod.OiiodDepEngine.depModeApply(OiiodDepEngine.java:2369)
at oracle.sysman.oii.oiif.oiifw.OiifwPostDepModesWCCE.doOperation(OiifwPostDepModesWCCE.java:327)
at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:140)
at oracle.sysman.oii.oiic.OiicDepWizEngine.doOperation(OiicDepWizEngine.java:339)
at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:140)
at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:586)
at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:177)
at oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:116)
at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:358)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:637)
Dynamic libraries:
0x00400000 - 0x00405000 d:\temp\OraInstall2006-08-24_11-39-01AM\jre\bin\javaw.exe
0x7C800000 - 0x7C8C0000 C:\WINDOWS\system32\ntdll.dll
0x77E40000 - 0x77F42000 C:\WINDOWS\system32\kernel32.dll
0x77F50000 - 0x77FEC000 C:\WINDOWS\system32\ADVAPI32.dll
0x77C50000 - 0x77CEF000 C:\WINDOWS\system32\RPCRT4.dll
0x77380000 - 0x77412000 C:\WINDOWS\system32\USER32.dll
0x77C00000 - 0x77C48000 C:\WINDOWS\system32\GDI32.dll
0x77BA0000 - 0x77BFA000 C:\WINDOWS\system32\MSVCRT.dll
0x62D80000 - 0x62D89000 C:\WINDOWS\system32\LPK.DLL
0x75490000 - 0x754F1000 C:\WINDOWS\system32\USP10.dll
0x6D420000 - 0x6D4EE000 d:\temp\OraInstall2006-08-24_11-39-01AM\jre\bin\hotspot\jvm.dll
0x76AA0000 - 0x76ACD000 C:\WINDOWS\system32\WINMM.dll
0x6D220000 - 0x6D227000 d:\temp\OraInstall2006-08-24_11-39-01AM\jre\bin\hpi.dll
0x6D3B0000 - 0x6D3BD000 d:\temp\OraInstall2006-08-24_11-39-01AM\jre\bin\verify.dll
0x6D250000 - 0x6D266000 d:\temp\OraInstall2006-08-24_11-39-01AM\jre\bin\java.dll
0x6D3C0000 - 0x6D3CD000 d:\temp\OraInstall2006-08-24_11-39-01AM\jre\bin\zip.dll
0x6D020000 - 0x6D128000 D:\temp\OraInstall2006-08-24_11-39-01AM\jre\bin\awt.dll
0x73070000 - 0x73097000 C:\WINDOWS\system32\WINSPOOL.DRV
0x76290000 - 0x762AD000 C:\WINDOWS\system32\IMM32.dll
0x77670000 - 0x777A4000 C:\WINDOWS\system32\ole32.dll
0x6D1E0000 - 0x6D21B000 D:\temp\OraInstall2006-08-24_11-39-01AM\jre\bin\fontmanager.dll
0x10000000 - 0x1001E000 D:\temp\OraInstall2006-08-24_11-39-01AM\jre\bin\JavaAccessBridge.dll
0x6D2C0000 - 0x6D2DB000 D:\temp\OraInstall2006-08-24_11-39-01AM\jre\bin\jpeg.dll
0x08730000 - 0x08745000 D:\temp\OraInstall2006-08-24_11-39-01AM\oui\bin\win32\oraInstaller.dll
0x08240000 - 0x08249000 D:\temp\OraInstall2006-08-24_11-39-01AM\dbwsec.dll
0x08C80000 - 0x08C86000 D:\temp\OraInstall2006-08-24_11-39-01AM\orawsec9.dll
0x091F0000 - 0x09214000 D:\temp\OraInstall2006-08-24_11-39-01AM\WinPrereq.dll
0x08CA0000 - 0x08CAC000 D:\temp\OraInstall2006-08-24_11-39-01AM\Win32Env.dll
0x09A30000 - 0x09A3F000 D:\temp\OraInstall2006-08-24_11-39-01AM\w32RegQueries152.dll
0x09E50000 - 0x09E5E000 D:\temp\OraInstall2006-08-24_11-39-01AM\WindowsGeneralQ.dll
0x0A270000 - 0x0A28B000 D:\temp\OraInstall2006-08-24_11-39-01AM\SID_Queries.dll
0x76C10000 - 0x76C39000 C:\WINDOWS\system32\imagehlp.dll
0x6D580000 - 0x6D628000 C:\WINDOWS\system32\dbghelp.dll
0x77B90000 - 0x77B98000 C:\WINDOWS\system32\VERSION.dll
0x76B70000 - 0x76B7B000 C:\WINDOWS\system32\PSAPI.DLL
Local Time = Thu Aug 24 11:43:20 2006
Elapsed Time = 256
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.3.1_01 mixed mode)
#

An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION occurred at PC=0xa272c7d
Function name=Java_W32LocateSidNative_w32LocateSidHome
Library=D:\temp\OraInstall2006-08-24_11-39-01AM\SID_Queries.dllNote that the above error information is not pointing at Java code. You will do better asking this question at Oracle.

Facing Problem in Configuring Radio buttons

Hi,
I have a requirement as follows:
There are two fields:
A1 - Input field
R1 - Radio button field
Now I need to display the fields as mentioned below, in ONE ROW of left Panel
I to J K to M N to P
A1.label A1.field value R1 (2 radio buttons with no label)
When I am trying to do this, I am getting an error for Radio button field, saying:
Element must cover the entire panel
Error in property value
Could you please help me out to solve my issue..
Thanks for the needful..
Sandeep

Hi Dharma,
My Problem is solved..
Well the weird part is, when I click on Apply button, it has shown the errors as mentioned above. I thought, it won't allow me to save the configuration. However as soon as click on SAVE button, all the config changes have been updated successfully.
I am not sure, why SAP is showing those errors, when we are able to save the config successfully....
Thanks for your reply...
Cheers
Sandeep

I am Facing problem with "Send to connection" in SharePoint Server 2010.

Hi all,
I am working on SharePoint Server 2010
I have a site collection and sub sites in it.
I want to move the document form one site library to another site library.
Since it can be done by configuring, Send to connection in Central Admin.
I activated Content Organizer rules in both the sites.
I added new connection for one site and append the url
/_vti_bin/officialfile.asmx
I tested the url on clicking
Click here to test link it gives me message that
"URl is a Valid routing Destination".
and finally I added the connection
After configuring this I open the other site and uploaded a document in it and after uploading the document I selected send to
option and clicked on my connection what I created in central admin.
But it gives me error: The site could not be found or accessed
Please help me for this...
Thanks in advance..
Faheem Ahamed

Hi,
In my case, I'm routing an InfoPath form (After having approved) to an archived Forms Library within the same sub-site.
I created Send To connection, setup Content Organizer rules, setup Record Retention policy on the source Forms Library, but even after running both the Timer jobs (Information management policy and Expiration policy), the document didn't get moved to the
archived library.
I checked under Compliance details of the form that the Scheduled occurrence date shows 'Completed' i.e. the Information management policy timer job did its task, but the other Timer job didn't move this form.
Then I tried sending this form manually using Send To. In that case, although the form got moved to the archived library, but I see 'Unexpected error' on the screen.
The ULS shows following entries:
<nativehr>0x80070057</nativehr><nativestack></nativestack>Invalid data has been used to update the list item. The field you are trying to update may be read only.Possible mismatch between the reported error with code = 0x8107210c
and message: "Invalid data has been used to update the list item. The field you are trying to update may be read only." and the returned error with code 0x80070057.
OfficialFile: File
http://server/sites/site/SourceFormsLibrary/InfoPathForm.xml was not saved at router location TargetLibrary. Exception <nativehr>0x80070057</nativehr><nativestack></nativestack>Invalid data has been used to update the list item.
The field you are trying to update may be read only. thrown at: at Microsoft.SharePoint.Library.SPRequestInternalClass.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion,
Boolean bPreserveItemUIVersion, Boolean bUpdateNoVersion, Int32& plID, String& pbstrGuid, Guid pbstrNewDocId, Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames, Object& pvarAttachmentContents, Object& pvarProperties,
Boolean bCheckOut...
Critical --- The
http://server/sites/site/_vti_bin/OfficialFile.asmx site is not properly configured for this request.
Can somebody tell how manual Send To is working within the same site collection.
Any help will be appreciated!
Thanks!
Ashish

Facing problem in configuring mail server in BAM server

Similar Messages

Maybe you are looking for