Facing problem in JFileChooser setSelectedFile
Hi All,
Am facing problem in JFileChooser's setSelectedFile.
While trying to save the file I give a default file name which may contain "/" also.When I pass the File Object with the name(eg AC/B_XYZ_123) to the JFileChooser's setSelectedFile it is displaying the file name in the dialog as B_XYZ_1234 and it is not allowing me to browse through the directories.The file dialog is showing the default director if i try to move to some other directory for saving the file it is not moving insted it is again showing the same directory.
the following lines of statements am using in my code.
File defaultFile = new File("AS/B_FTies2107_0138.csv");
fileChooser.setSelectedFile(defaultFile);
if file doesnt contain any "/" then it works fine, i could able to browe through the directories and save the file,problem occurs only when the file name contains "/"
in my dialog it is displaying the file name as "B_FTies2107_0138.csv"
can any one help me in solving this problem.
Thanks & Regards
N.V.N.GopiKrishna
It's because / is used to denote a new directory. This originated from *NIX type systems but also now works on Windows. Your best bet is to use a different character, maybe a hyphen.
Similar Messages
-
Facing problem while going to catch return result from web-services.
Hi everybody,
I am new to BPEL. I am facing problem while going to catch the attributes of resultsets returning from web-services(QAS). As far as my knowledge, two types of results it should return - XML entities and another is attributes which is coming as the part of XML entitites. I am able to catch the XML entities, but can't catch the attributes under it. Even, I am not able to see whether web-services returning something within that field.
When, I tried to catch the attribute and store to a temporary varilable using the following code:
*<assign name="AssignQASDoGetAddress1">*
*<copy>*
*<from variable="InvokeQAS_DoSearch_OutputVariable"*
part="body"
query="/ns6:QASearchResult/ns6:QAPicklist/ns6:PicklistEntry/@PostcodeRecoded"/>
*<to variable="temp"/>*
*</copy>*
*</assign>*
but, I am facing the following selectionFailure errors after running it:
*"{http://schemasxmlsoap.org/ws/2003/03/business-process/}selectionFailure" has been thrown.*
-<selectionFailure xmlns="http://schemasxmlsoap.org/ws/2003/03/business-process/">
-<part name="summary">
*<summary>*
empty variable/expression result.
xpath variable/expression expression "bpws:getVariableData('InvokeQAS_DoSearch_OutputVariable', 'body', '/ns6:QASearchResult/ns6:QAPicklist/ns6:PicklistEntry/@PostcodeRecoded')" is empty at line 269, when attempting reading/copying it.
Please make sure the variable/expression result "bpws:getVariableData('InvokeQAS_DoSearch_OutputVariable', 'body', '/ns6:QASearchResult/ns6:QAPicklist/ns6:PicklistEntry/@PostcodeRecoded')"is not empty.
*</summary>*
*</part>*
*</selectionFailure>*
Getting this error it seems to me that web-service is returning nothing, but, it returns something as it has been catched using a method called isPostcodeRecoded() Java Code in Oracle ADF. This method has been used as it should return boolean whereas for catching the xml entities using java code we used the method like getPostcode(), getMoniker().
For your information, we are using Jdeveloper as the development tool for building the BPEL process.
Am I doing any syntax error. Please consider it as urgent and provide me asolution.
Thanks in advance.
Chandrachur.Thanks Dave and Marc, for your suggestions. Actually what I found is QAS web-service is returning nothing as attributes when the attributes are set to the default value. For example, following is the part of the wsdl of the result which QAS webservice returns.
<xs:element name="QASearchResult">
- <xs:complexType>
- <xs:sequence>
<xs:element name="QAPicklist" type="qas:QAPicklistType" minOccurs="0" />
<xs:element name="QAAddress" type="qas:QAAddressType" minOccurs="0" />
</xs:sequence>
<xs:attribute name="VerifyLevel" type="qas:VerifyLevelType" default="None" />
</xs:complexType>
</xs:element>
<xs:complexType name="QAPicklistType">
- <xs:sequence>
<xs:element name="FullPicklistMoniker" type="xs:string" />
<xs:element name="PicklistEntry" type="qas:PicklistEntryType" minOccurs="0" maxOccurs="unbounded" />
<xs:element name="Prompt" type="xs:string" />
<xs:element name="Total" type="xs:nonNegativeInteger" />
</xs:sequence>
<xs:attribute name="AutoFormatSafe" type="xs:boolean" default="false" />
<xs:attribute name="AutoFormatPastClose" type="xs:boolean" default="false" />
<xs:attribute name="AutoStepinSafe" type="xs:boolean" default="false" />
<xs:attribute name="AutoStepinPastClose" type="xs:boolean" default="false" />
<xs:attribute name="LargePotential" type="xs:boolean" default="false" />
<xs:attribute name="MaxMatches" type="xs:boolean" default="false" />
<xs:attribute name="MoreOtherMatches" type="xs:boolean" default="false" />
<xs:attribute name="OverThreshold" type="xs:boolean" default="false" />
<xs:attribute name="Timeout" type="xs:boolean" default="false" />
</xs:complexType>
<xs:complexType name="PicklistEntryType">
- <xs:sequence>
<xs:element name="Moniker" type="xs:string" />
<xs:element name="PartialAddress" type="xs:string" />
<xs:element name="Picklist" type="xs:string" />
<xs:element name="Postcode" type="xs:string" />
<xs:element name="Score" type="xs:nonNegativeInteger" />
</xs:sequence>
<xs:attribute name="FullAddress" type="xs:boolean" default="false" />
<xs:attribute name="Multiples" type="xs:boolean" default="false" />
<xs:attribute name="CanStep" type="xs:boolean" default="false" />
<xs:attribute name="AliasMatch" type="xs:boolean" default="false" />
<xs:attribute name="PostcodeRecoded" type="xs:boolean" default="false" />
<xs:attribute name="CrossBorderMatch" type="xs:boolean" default="false" />
<xs:attribute name="DummyPOBox" type="xs:boolean" default="false" />
<xs:attribute name="Name" type="xs:boolean" default="false" />
<xs:attribute name="Information" type="xs:boolean" default="false" />
<xs:attribute name="WarnInformation" type="xs:boolean" default="false" />
<xs:attribute name="IncompleteAddr" type="xs:boolean" default="false" />
<xs:attribute name="UnresolvableRange" type="xs:boolean" default="false" />
<xs:attribute name="PhantomPrimaryPoint" type="xs:boolean" default="false" />
</xs:complexType>
here the attributes like FullAddress, PostcodeRecodedare , etc. are not being return by the web-service when it is getting the default value false. But, if it gets true then , it is being displayed at the BPEL console.
Do you have any idea how can I catch the attributes and its value even when it gets the default value which is already set. Previously, it was returning(it was not being displayed at the console).
Thanks once again for your valuable suggestions...!!!
Chandrachur. -
i am facing problem while reading values from properties file ...i am getting null pointer exception earlier i was using jdeveloper10g now i am using 11g
hi TimoHahn,
i am getting following exception in JDeveloper(11g release 2) Studio Edition Version 11.1.2.4.0 but it works perfectly fine in JDeveloper 10.1.2.1.0
Root cause of ServletException.
java.lang.NullPointerException
at java.util.PropertyResourceBundle.handleGetObject(PropertyResourceBundle.java:136)
at java.util.ResourceBundle.getObject(ResourceBundle.java:368)
at java.util.ResourceBundle.getString(ResourceBundle.java:334)
at org.rbi.cefa.master.actionclass.UserAction.execute(UserAction.java:163)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:432)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178) -
Hello All,
we have created shared folder on multiple client machine in domain environment on different 2 OS like-XP,Vista, etc.
from some day's When we facing problem when we are access from host name that shared folder is accessible but same time same computer when we are trying to access the share folder with IP it asking for credentials i have type again and again
correct credential but unable to access that. If i re-share the folder then we are access it but when we are restarted the system then same problem is occurring.
I have checked IP,DNS,Gateway and more each & everything is well.
Pls suggest us.
Pankaj KumarHi,
According to your description, my understanding is that the same shared folder can be accessed by name, but can’t be accessed be IP address and asks for credentials.
Please try to enable the option below on the device which has shared folder:
Besides, check the Advanced Shring settings of shared folder and confrim that if there is any limitation settings.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Facing problem with logo in the PDF attachment when sending mail...
hi friends,
i'm facing problem with logo in the PDF attachment to the mail.
my requirement:
1. enter spool number and mail id in the selection screen.
process:
1. now the program will fetch the spool data and converts it to PDF.
2. but when i'm trying to send mail with this PDF as attachment.
when i open the PDF file from the mail, logo is not coming properly (looks disturbed).
can anyone help me how to resolve this issue...
thanks in advance, murashali.hi dinakar, thanks for your mail...
logo looks good in spool/script/smartform.
even it look good when i download this spool to pdf and to the presentation server as pdf file.
i'm using CONVERT_OTFSPOOLJOB_2_PDF.
when i used CONVERT_ABAPSPOOLJOB_2_PDF, is gives a msg - 'spool number not found'.
here i'm using folloing code to pass pdf to the function module: SO_NEW_DOCUMENT_ATT_SEND_API1.
code:
Transfer the 132-long strings to 255-long strings
lt_mtab_pdf[] = pdf[].
LOOP AT lt_mtab_pdf INTO lwa_mtab_pdf.
TRANSLATE lwa_mtab_pdf USING ' ~'.
CONCATENATE lv_gd_buffer lwa_mtab_pdf INTO lv_gd_buffer.
CLEAR lwa_mtab_pdf.
ENDLOOP.
TRANSLATE lv_gd_buffer USING '~ '.
DO.
lwa_mess_att = lv_gd_buffer.
APPEND lwa_mess_att TO lt_mess_att.
CLEAR lwa_mess_att.
SHIFT lv_gd_buffer LEFT BY 255 PLACES.
IF lv_gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
NOTE: problem i believe is with ''. i'm getting this tilt symbol () in my pdf internal table. here in the above code the line TRANSLATE lv_gd_buffer USING '~ ' is changing the existing tilt to space. so my logo is getting disturbed.
even i tried with REPLACE this tilt with other char, but it doent work.
can you give any idea... -
Hello i'm facing problem i downloaded itunes version 11 32bit for windows 7 and after i installing the set up when i opened the iTunes a massages occur saying i tunes could not connect to iTunes store an unknown error occurred (-3212) even though my internet is on
Try this...
Triple click anywhere in the line below to select it and press Ctrl+C to copy it.
cmd /k netsh winsock reset
Press the WinLogoKey+R to open the run dialog, then Ctrl+V to paste, then press enter/return.
You should get something similar to this:
Reboot the computer and the problem should be resolved.
If it doesn't work then perhaps a full tear down and rebuild of iTunes will fix things. See Troubleshooting issues with iTunes for Windows updates for details.
tt2 -
i am facing problems while openin an application in facebook and other places.when i go to the application,an error shows and firefox closes autmatically either i send error reports or dont.....plz help
Notes:
1) Please use the code tags when posting code or JNLP/HTML. It helps to retain indentation and avoids asterisks and plus sings being interpreted as formatting marks. To do that, select the code/JNLP etc. and click the CODE button seen on the Plain Text tab of the message posting form.
2) That launch file is invalid. You might check it (and the project in general) using JaNeLA.
3) The only place that SimpleSerial class could be, that the JRE would find, is in the root of aeon.jar. Is it actually there? -
Dll Created In: - MFC VC
6.0
Application Exe Developed In:
- VC 6.0, C# and VB.net (Applications which are using dll)
OS: - Windows XP sp2 32bit
/ Windows Server 2008 64 bit
Problem: - Facing problem in creating socket
in a method from an already deployed application exe while same method is working from another exe from same environment from same location.
Description: - We have product component which
has an exe component and from exe we invoke a method, which is defining in dll, and that dll is developed in MFC VC6.0. In the dll we have a method which downloads images from another system after making socket connection. But every time we are getting Error
code 7, it is not giving desire result while same method is working from another exe from same environment from same location. And also me dll is deployed on many systems and giving proper output from same application.
Already Attempt: - Because error is coming on
client side so what we did, we created a driver in C# which invokes same method from same environment(on client machine) using same dll and we are astonished because it worked fine there.
Kindly Suggest: -
We are not able to figure out root cause because nothing is coming in windows event logs but what I did, for finding the problem line, I wrote logs on each line and found the exact line in application exe which is not working,
actually it is not executing Create () method,
I will give snippet of the code for understanding the problem because we are not finding any kind solution for it.
Kindly assist us in understanding and fixing this problem.
Code Snippet: -
Int Initialize (LPTSTR SiteAddress, short PortId)
try
CClientTSSocket *m_pJtsSockto;
m_pJtsSockto = new CClientTSSocket;
LONG lErr = m_pJtsSockto->ConnectTS(csIPAddress,PortId);
ErrorLog (0, 0, "--------ConnectTS has been called ------------","" );
catch(...)
DWORD errorCode = GetLastError();
CString errorMessage ;
errorMessage.Format("%lu",errorCode);
ErrorLog (0, 0, "Image System", (LPTSTR)(LPCTSTR)errorMessage);
return IS_ERR_WINDOWS;
Note: -
CClientTSSocket extends CAsyncSocket
IS_ERR_WINDOWS is a macro error code which value I found 7.
LONG ConnectTS(CString strIP, UINT n_Port)
ErrorLog(0,0,"ConnectTS is calling Create [is going to call]","");
if(!Create())
ErrorLog(0,0,"ConnectTS is calling [Create not called successfully] ","");
n_Err = GetLastError();
ErrorLog(n_Err,0,"ConnectTS is calling1111111111111111Erorrrrrrrrrrrrr","");
return NET_INIT;
ErrorLog(0,0,"ConnectTS is calling2222222222222222222","");
if(!AsyncSelect(0))
n_Err = GetLastError();
return NET_INIT;
if(!Connect(strIP,n_Port))
n_Err = GetLastError();
ErrorLog(n_Err,0,"ConnectTS","");
return SERVER_NOT_CONNECTED;
Code description: -
From
int GETImage_MT() method we call Initialize() method and pass client machine IP and Port and there we call
ConnectTS() method, In this method we Create() method and finally it returns the error code as mention in macro 7.
Logs after running the program: -
--------ConnectTS has been called ------------
ConnectTS is calling Create [is going to call]
Image System
0
Note: - According to logs, problem is coming in Create method().
Here 0 is errorMessage received in catch block. And from catch block it returns macro value 7. And when we run same method individually from same machine, same environment through same dll
from different exe, it is working fine and we are facing any kind of problem. While same problem application was working properly earlier but now continuously it showing problem.
Kindly assist us to resolve the issue.Pointer variable was already initialized; I have mention in code; kindly assist us.
Dll Created In: - MFC VC 6.0
Application Exe Developed In: - VC 6.0, C# and VB.net (Applications which are using dll)
OS: - Windows XP sp2 32bit / Windows Server 2008 64 bit
Problem: - Facing problem in creating socket
in a method from an already deployed application exe while same method is working from another exe from same environment from same location.
Description: - We have product component
which has an exe component and from exe we invoke a method, which is defining in dll, and that dll is developed in MFC VC6.0. In the dll we have a method which downloads images from another system after making socket connection. But every time we are getting
Error code 7, it is not giving desire result while same method is working from another exe from same environment from same location. And also me dll is deployed on many systems and giving proper output from same application.
Already Attempt: - Because error is coming
on client side so what we did, we created a driver in C# which invokes same method from same environment (on client machine) using same dll and we are astonished because it worked fine there.
Kindly Suggest:
- We are not able to figure out root cause because nothing is coming in windows event logs but what I did, for finding the problem line, I wrote logs on each line and found the exact line in application exe which is not
working, actually it is not executing Create () method, I will give snippet of the code for understanding
the problem because we are not finding any kind solution for it. Kindly assist us in understanding and fixing this problem.
Code Snippet: -
Int Initialize (LPTSTR SiteAddress, short PortId)
try
CClientTSSocket *m_pJtsSockto;
m_pJtsSockto = new CClientTSSocket;
LONG lErr = m_pJtsSockto->ConnectTS(csIPAddress,PortId);
ErrorLog (0, 0, "--------ConnectTS has been called ------------","" );
catch(...)
DWORD errorCode = GetLastError();
CString errorMessage ;
errorMessage.Format("%lu",errorCode);
ErrorLog (0, 0, "Image System", (LPTSTR)(LPCTSTR)errorMessage);
return IS_ERR_WINDOWS;
Note: - CClientTSSocket extends CAsyncSocket
IS_ERR_WINDOWS is a macro error code which value I found 7.
LONG ConnectTS(CString strIP, UINT n_Port)
ErrorLog(0,0,"ConnectTS is calling Create [is going to call]","");
if(!Create())
ErrorLog(0,0,"ConnectTS is calling [Create not called successfully] ","");
n_Err = GetLastError();
ErrorLog(n_Err,0,"ConnectTS is calling1111111111111111Erorrrrrrrrrrrrr","");
return NET_INIT;
ErrorLog(0,0,"ConnectTS is calling2222222222222222222","");
if(!AsyncSelect(0))
n_Err = GetLastError();
return NET_INIT;
if(!Connect(strIP,n_Port))
n_Err = GetLastError();
ErrorLog(n_Err,0,"ConnectTS","");
return SERVER_NOT_CONNECTED;
Code description: - From int GETImage_MT() method
we call Initialize() method and pass client machine IP and Port and there we call ConnectTS() method, In
this method we Create() method and finally it returns the error code as mention in macro 7.
Logs after running the program: -
--------ConnectTS has been called ------------
ConnectTS is calling Create [is going to call]
Image System 0
Note: - According to logs, problem is coming in Create method(). Here
0 is errorMessage received in catch block. And from catch block it returns macro value 7. And when we run same method individually from same machine, same environment through same dll from different exe, it is working fine and we are facing any kind of problem.
While same problem application was working properly earlier but now continuously it showing problem.
Kindly assist us to resolve the issue. -
i'm using an iPhone 4 after upgrading to iOS 5 i'm getting an error 1635 now i'm facing problems syncing my contacts and facing many problems, i have restored my iPhone but still i'm getting the same error
Did you check your security software settings? eliminating conflicts from third-party security software.
-
I am using Firefox 12.0. I did not have issue with hotmail, but I am facing problem this week after firefox upgrade. After entering login the page freeze. I am not able to continue.
I reviewed the thread. I am not using Foxit.
I reviewed hot mail forum. They suggest firefox upgrade causes this issue.
I tried after clearing my browser's cache and cookies. The situation remain same. Any idea?
What is the workaround?Firefox 3.6 needs the Java Second Generation Plugin which comes with newer versions than 1.6.0_03 - update Java, the latest version is 1.6.0_22
-
Hi Experts , I am currently facing problems while running restricted version copy in sap apo .. The log says 0 location products copied and that the process has timed out. the error message is " /SAPAPO/MVM_INT_SVC_CO_VER_LCW reported exception in task DP00014 " , then ending in time limit exceeded. could anyone explain why this happens. please note even if the log says 0 location products copied , in reality they have have been partially copied.
Regards
JerelHi, thank you for your replies, I found out few things about my servlet, and its portability
and i have few questions, although i marked this topic as answered i guess its ok to post
I am using javax.servlet.context.tempdir to store my files in that servletcontext temporary directory. But i dont know how to give hyperlink
of the modified files to the user for them to download the modified files.
What i am using to get the tempdir i will paste
File baseurl = (File)this.getServletContext().getAttribute("javax.servlet.context.tempdir");
System.out.println(baseurl);
baseurl = new File(baseurl.getAbsolutePath()+File.separator+"temp"+File.separator+"files");
baseurl.mkdirs();so i am storing my files in that temp/files folder and the servlet processes them and modifies them, then how to present them as
links to the user for download ?
and as the servlet is multithreaded by nature, if my servlet gets 2 different requests with same file names, i guess one of them will be overwritten
And i want to create unique directory for each request made to the servlet , so file names dont clash.
one another thing is that i want my servlet to be executed by my <form action> only, I dont want the user to simply type url and trigger the servlet
Reply A.S.A.P. please..
Thanks and regards,
Mihir Pandya -
Facing problem in sync from itunes - windows 7 64bit
Hi, I've been using iphone 4 for more than a year , i updated to ios5.0.1 and had no issued in it , but later on started facing problem in syncing my phone with itunes since i started using windows 7- 64bit , then i thought i might need to upgrade my device , so i upgarded to 5.1.1 but still having same problem , whenever i connect my iphone to itunes and start sync , it takes a bit long for back up and when it comes to changes ,after saying 'changes to be apllied ' it gets stuck to 'Copying 1of 59 anything ( music, videos,apps ) ' and then it stops responding and i get an error message 'UNBLE TO COPY/SYNC DUE TO ITUNES TIMED OUT ' or something I'm unable to figure out whats the problem , i unistall itunes and then downlaoded new version 10.6.3 , still facing same problem , unable to sync anything but i have noticed one thing i'm having this issue since i started using windows 7 - 64bit , earlier there was no issued is 64bit spportable to itunes ??? plzzzzzzzzzzzzzzz help , Regards,Sweety sadanaios5.1.1 user
No problems about the further questions.
The term EHCI roughly means "USB 2.0 host controller". So pretty much any modern nVidia chipset will have one of those. So the issue ends up boiling down to whether or not you've got an nVidia chipset, I think.
I went searching through the HP Support forums, and I found a user-supplied FAQ that suggests that you do have an nVidia chipset. See Daniel's second post in this thread (the one on chipset drivers):
[Windows7 Upgrade Guide for dv6000/dv9000 models|http://h30434.www3.hp.com/t5/Operating-systems-and-software/Windows7-Upg rade-Guide-for-dv6000-dv9000-models/td-p/179816]
... but "suggests" isn't quite the same thing as "confirms".
I'm thinking it might be worth posting over at the HP Support forums and asking if you have one of the HP models that requires the update for Windows 7 described in the following post. (The update in question is actually the same as the Microsoft hotfix I linked you to earlier.)
[Driver update for Win7 USB issue on nVidia chipset systems now available|http://h30434.www3.hp.com/t5/Lockups-Freezes-Hangs/Driver-update-for- Win7-USB-issue-on-nVidia-chipset-systems-now/m-p/188193]
(Not trying to get rid of you here ... I just want to get you on the radar screens of people with a bit more specific knowledge about the chipset on your particular HP model. I figure the HP forums would be a useful place to go for that.) -
Facing problem in copy of standard SAP program
hi,,,,,,,,,,,,
when i execute this program in production server it displays an error ....i m trying to find out this error but this type(error) i cudnt find plz help me .....
i m sending the documents which i rcvd from the system after the execution of this program.
this program executes perfctlly in developmnt server but it creates problem in production server,,,i searched out the type kkblo_t_sortinfo in the whole program but i cud nt find it ,,,,,,,,,
documents.....
Runtime Errors SYNTAX_ERROR
Date and Time 18.11.2006 12:01:19
ShrtText
Syntax error in program "ZVISA_RM07MLBD ".
What happened?
Error in ABAP application program.
The current ABAP program "????????????????????????????????????????" had to be
terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "ZVISA_RM07MLBD ", the following syntax error occurred
in the Include "RM07MLBD_FORM_01 " in line 1805:
The type KKBLO_T_SORTINFO" is unknown."
also i m sending the include program ver i m facing problem...*&----
*& Include RM07MLBD_FORM_01 *
correction Aug. 2005 MM "n856424
- the fields "entry time", "entry date", and "User" are "n856424
are not filled filled for price change documents "n856424
MB5B improved regarding accessibilty "n773673
Improvements : March 2003 MM "n599218
- print the page numbers "n599218
- send warning M7 393 when user deletes the initial "n599218
display variant "n599218
- show the current activity and the progress "n599218
contains FORM routines without preprocessor commands and "n547170
no text elements "n547170
*& Form INITIALISIERUNG
Vorbelegung der Anzeigevariante *
form initialisierung.
repid = sy-repid.
variant_save = 'A'.
clear variante.
variante-report = repid.
Default-Variante holen:
def_variante = variante.
call function 'REUSE_ALV_VARIANT_DEFAULT_GET'
exporting
i_save = variant_save
changing
cs_variant = def_variante
exceptions
not_found = 2.
if sy-subrc = 0.
save the initial, e.g. default variant "n599218
move def_variante-variant to alv_default_variant. "n599218
p_vari = def_variante-variant.
endif.
print-no_print_listinfos = 'X'.
endform. " INITIALISIERUNG
*& Form AKTUELLE_BESTAENDE
Ermittlung der aktuellen eigenen Bestände,
d.h. der bewerteten Bestände und des Retourensperrbestandes,
auf Lagerortebene und auf Material- bzw. Chargenebene;
folgende Sonderbestände können gesondert ausgewiesen werden:
Lohnbearbeitung ( Sonderbestandskennzeichen O )
Kundenkonsignation ( " V, W, M )
Lieferantenkonsignation ( " K )
Projektbestand ( " Q )
Kundenauftragsbestand ( " E )
form aktuelle_bestaende.
delete the range tables for the creation of table g_t_organ
if g_t_organ[] is initial. "n433765
refresh : g_0000_ra_werks, g_0000_ra_bwkey, g_0000_ra_bukrs.
clear : g_0000_ra_werks, g_0000_ra_bwkey, g_0000_ra_bukrs.
endif.
if bwbst = 'X'.
select the valuated stocks
perform aktuelle_bst_bwbst.
elseif lgbst = 'X'.
all own stock from storage locations or batches
if xchar = ' '.
perform aktuelle_bst_lgbst_mard.
elseif xchar = 'X'.
perform aktuelle_bst_lgbst_xchar.
endif.
elseif sbbst = 'X'.
special stocks
case sobkz.
when 'O'.
perform aktuelle_bst_sbbst_o.
when 'V' or 'W'.
perform aktuelle_bst_sbbst_v_w.
when 'K' or 'M'.
perform aktuelle_bst_sbbst_k_m.
when 'Q'.
perform aktuelle_bst_sbbst_q.
when 'E'.
perform aktuelle_bst_sbbst_e.
when others.
Angegebener Sonderbestand nicht vorhanden.
message s290.
perform anforderungsbild.
endcase.
endif.
create table g_t_organ with the plants and valuation areas from
the database selection if table g_t_organ is empty
perform f0000_create_table_g_t_organ
using c_no_error.
endform. "aktuelle_bestaende.
*& AKTUELLE_BST_LGBST_MARD
form aktuelle_bst_lgbst_mard.
eigener Bestand auf Lagerortebene -
... auf Materialebene -
select * from mard into corresponding fields of table imard
where werks in g_ra_werks
and lgort in g_ra_lgort
and matnr in matnr.
if sy-subrc ne 0. "no records found ?
message s289.
Kein Material in Selektion vorhanden.
perform anforderungsbild.
endif.
does the user has the the authority for the found entries ?
loop at imard.
perform f9000_auth_plant_check
using imard-werks.
if g_flag_authority is initial.
delete imard.
else.
perform f9200_collect_plant using imard-werks.
perform f9400_material_key using imard-matnr.
endif.
endloop.
describe table imard lines g_f_cnt_lines.
if g_f_cnt_lines is initial. "no records left ?
message s289.
Kein Material in Selektion vorhanden.
perform anforderungsbild.
endif.
if not charg-low is initial or not charg-high is initial.
clear charg.
message w285.
Charge wird zurückgesetzt.
endif.
endform. "aktuelle_bst_lgbst_mard
AKTUELLE_BST_LGBST_XCHAR
form aktuelle_bst_lgbst_xchar.
read the stock table mchb for batches
select * from mchb into corresponding fields of table imchb
where werks in g_ra_werks
and lgort in g_ra_lgort
and matnr in matnr
and charg in charg.
describe table imchb lines g_f_cnt_lines.
if g_f_cnt_lines is initial. "no records found ?
message s821 with matnr werks lgort.
Keine Chargen zu Material & in Werk & Lagerort & vorhanden.
perform anforderungsbild.
endif.
process working table with the batches
loop at imchb.
does the user has the the authority for the found entries ?
perform f9000_auth_plant_check
using imchb-werks.
if g_flag_authority is initial.
delete imchb.
else.
perform f9200_collect_plant using imchb-werks.
perform f9400_material_key using imchb-matnr.
endif.
endloop.
endform. "aktuelle_bst_lgbst_xchar
AKTUELLE_BST_SBBST_O
form aktuelle_bst_sbbst_o.
process Special Stocks with Vendor
Bemerkung: Im Gegensatz zu den anderen Sonderbeständen existieren
der Lohnbearbeitungs- und Kundenkonsignationsbestand
nur auf Werksebene.
select * from mslb into corresponding fields of table xmslb
where werks in g_ra_werks
and matnr in matnr
and charg in charg
and sobkz = 'O'.
if sy-subrc <> 0. "no records found ?
message s289.
Kein Material in Selektion vorhanden.
perform anforderungsbild.
endif.
process the found records special stock vendor
loop at xmslb.
check the authority
perform f9000_auth_plant_check
using xmslb-werks.
if g_flag_authority is initial.
delete xmslb.
else.
fill range table g_0000_ra_werks if it is still empty
perform f9200_collect_plant using xmslb-werks.
perform f9400_material_key using xmslb-matnr.
endif.
endloop.
error, if no records are left
describe table xmslb lines g_f_cnt_lines.
if g_f_cnt_lines is initial.
message s289.
Kein Material in Selektion vorhanden.
perform anforderungsbild.
endif.
sort xmslb.
loop at xmslb.
move-corresponding xmslb to imslb.
collect imslb.
endloop.
free xmslb. refresh xmslb.
if xchar = ' '.
loop at imslb.
move-corresponding imslb to imslbx.
collect imslbx.
endloop.
sort imslbx.
elseif xchar = 'X'.
loop at imslb.
check imslb-charg is initial.
delete imslb.
endloop.
endif.
endform. "aktuelle_bst_sbbst_o.
AKTUELLE_BST_SBBST_V_W
form aktuelle_bst_sbbst_v_w.
Sonderbestand Kundenkonsignation -
elseif sobkz = 'V' or sobkz = 'W'.
select * from msku into corresponding fields of table xmsku
where werks in g_ra_werks
and matnr in matnr
and charg in charg
and sobkz eq sobkz.
if sy-subrc <> 0. "no records found
message s289.
Kein Material in Selektion vorhanden.
perform anforderungsbild.
endif.
process Special Stocks with Customer
loop at xmsku.
perform f9000_auth_plant_check using xmsku-werks.
if g_flag_authority is initial.
delete xmsku.
else.
perform f9200_collect_plant using xmsku-werks.
perform f9400_material_key using xmsku-matnr.
endif.
endloop.
describe table xmsku lines g_f_cnt_lines.
if g_f_cnt_lines is initial. "no records found
message s289.
Kein Material in Selektion vorhanden.
perform anforderungsbild.
endif.
sort xmsku.
loop at xmsku.
move-corresponding xmsku to imsku.
collect imsku.
endloop.
free xmsku. refresh xmsku.
if xchar = ' '.
loop at imsku.
move-corresponding imsku to imskux.
collect imskux.
endloop.
sort imskux.
elseif xchar = 'X'.
loop at imsku.
check imsku-charg is initial.
delete imsku.
endloop.
endif.
if sy-subrc ne 0.
message s042. "#EC * "n443935
Charge ist nicht vorhanden.
perform anforderungsbild.
endif.
endform. "aktuelle_bst_sbbst_v_w
AKTUELLE_BST_SBBST_K_M
form aktuelle_bst_sbbst_k_m.
Sonderbestand Lieferantenkonsignation -
elseif sobkz = 'K' or sobkz = 'M'.
select * from mkol into corresponding fields of table xmkol
where werks in g_ra_werks
and lgort in g_ra_lgort
and matnr in matnr
and charg in charg
and sobkz eq sobkz.
if sy-subrc <> 0. "no records found
message s289.
Kein Material in Selektion vorhanden.
perform anforderungsbild.
endif.
process Special Stocks from Vendor
loop at xmkol.
perform f9000_auth_plant_check using xmkol-werks.
if g_flag_authority is initial.
delete xmkol.
else.
perform f9200_collect_plant using xmkol-werks.
perform f9400_material_key using xmkol-matnr.
endif.
endloop.
describe table xmkol lines g_f_cnt_lines.
if g_f_cnt_lines is initial. "no records found
message s289.
Kein Material in Selektion vorhanden.
perform anforderungsbild.
endif.
sort xmkol.
loop at xmkol.
move-corresponding xmkol to imkol.
collect imkol.
endloop.
free xmkol. refresh xmkol.
if xchar = ' '.
loop at imkol.
move-corresponding imkol to imkolx.
collect imkolx.
endloop.
sort imkolx.
elseif xchar = 'X'.
loop at imkol.
check imkol-charg is initial.
delete imkol.
endloop.
endif.
if sy-subrc ne 0.
message s042. "#EC * "n443935
Charge ist nicht vorhanden.
perform anforderungsbild.
endif.
endform. "aktuelle_bst_sbbst_k_m.
AKTUELLE_BST_SBBST_Q
form aktuelle_bst_sbbst_q.
Projektbestand -
elseif sobkz = 'Q'.
select * from mspr into corresponding fields of table xmspr
where werks in g_ra_werks
and lgort in g_ra_lgort
and matnr in matnr
and charg in charg
and sobkz eq sobkz.
if sy-subrc <> 0. "no record found
message s289.
Kein Material in Selektion vorhanden.
perform anforderungsbild.
endif.
process project stock
loop at xmspr.
perform f9000_auth_plant_check using xmspr-werks.
if g_flag_authority is initial.
delete xmspr.
else.
perform f9200_collect_plant using xmspr-werks.
perform f9400_material_key using xmspr-matnr.
endif.
endloop.
describe table xmspr lines g_f_cnt_lines.
if g_f_cnt_lines is initial. "no record left
message s289.
Kein Material in Selektion vorhanden.
perform anforderungsbild.
endif.
sort xmspr.
loop at xmspr.
move-corresponding xmspr to imspr.
collect imspr.
endloop.
free xmspr. refresh xmspr.
if xchar = ' '.
loop at imspr.
move-corresponding imspr to imsprx.
collect imsprx.
endloop.
sort imsprx.
elseif xchar = 'X'.
loop at imspr.
check imspr-charg is initial.
delete imspr.
endloop.
endif.
endform.: "aktuelle_bst_sbbst_q
AKTUELLE_BST_SBBST_E
form aktuelle_bst_sbbst_e.
Kundenauftragsbestand -
select * from mska into corresponding fields of table xmska
where werks in g_ra_werks
and lgort in g_ra_lgort
and matnr in matnr
and charg in charg
and sobkz eq sobkz.
if sy-subrc <> 0. "no records found
message s289.
Kein Material in Selektion vorhanden.
perform anforderungsbild.
endif.
process Sales Order Stock
loop at xmska.
perform f9000_auth_plant_check using xmska-werks.
if g_flag_authority is initial.
delete xmska.
else.
perform f9200_collect_plant using xmska-werks.
perform f9400_material_key using xmska-matnr.
endif.
endloop.
describe table xmska lines g_f_cnt_lines.
if g_f_cnt_lines is initial. "no records left ?
message s289.
Kein Material in Selektion vorhanden.
perform anforderungsbild.
endif.
sort xmska.
loop at xmska.
move-corresponding xmska to imska.
collect imska.
endloop.
free xmska. refresh xmska.
if xchar = ' '.
loop at imska.
move-corresponding imska to imskax.
collect imskax.
endloop.
sort imskax.
elseif xchar = 'X'.
loop at imska.
check imska-charg is initial.
delete imska.
endloop.
endif.
endform. "aktuelle_bst_sbbst_e
*& Form TABELLEN_LESEN
Lesen der Materialkurztexte (Tabelle MAKT), *
der Mengeneinheiten (Tabelle MARA) und *
Mengen- und Wertfortschreibung zum Material (Tabelle T134M) *
(Letzteres ist zum Aussortieren der unbewerteten bzw. *
kontierten Warenbewegungen notwendig) *
form tabellen_lesen.
if not g_t_mat_key[] is initial. "n451923
select the material masters
select matnr meins mtart from mara
into corresponding fields of table imara
for all entries in g_t_mat_key
where matnr = g_t_mat_key-matnr.
select the short text for all materials
take only the necessary fields "n451923
select matnr maktx from makt "n451923
into corresponding fields of table g_t_makt "n451923
for all entries in g_t_mat_key
where matnr = g_t_mat_key-matnr
and spras = sy-langu.
sort imara by matnr. "n451923
sort g_t_makt by matnr. "n451923
free g_t_mat_key.
endif.
data: begin of k1 occurs 0,
mtart like t134m-mtart,
end of k1.
refresh k1.
loop at imara.
k1-mtart = imara-mtart.
collect k1.
endloop.
if not k1[] is initial. "n451923
select * from t134m
into corresponding fields of table it134m
for all entries in k1 where mtart = k1-mtart
and bwkey in g_ra_bwkey.
endif. "n451923
loop at it134m.
read table organ with key bwkey = it134m-bwkey.
perform f9300_read_organ
using c_bwkey it134m-bwkey.
if sy-subrc ne 0.
delete it134m.
endif.
endloop.
To find postings with valuation string, but without relevance for
the valuated stock, Big-G recommended this logic:
Take lines from MSEG where for the combination BUSTW/XAUTO=XBGBB
there is an entry in T156W with key BSX.
select bustw xbgbb from t156w
into corresponding fields of table it156w
where vorsl = 'BSX'.
sort it156w by bustw xbgbb.
delete adjacent duplicates from it156w.
delete it156w where bustw = space.
endform. " TABELLEN_LESEN
*& Form UNBEWERTET_WEG
Löschen der unbewerteten Materialien aus der internen *
Tabelle IMBEW
form unbewertet_weg.
sort it134m by bwkey mtart. "n451923
"n450764
delete the materials in plants without valuation "n450764
loop at g_t_mbew into g_s_mbew. "n450764
read table imara "n450764
with key matnr = g_s_mbew-matnr "n450764
binary search. "n450764
"n450764
read table it134m with key bwkey = g_s_mbew-bwkey "n450764
mtart = imara-mtart binary search.
if sy-subrc ne 0.
message ...
delete g_t_mbew. "n450764
else.
if it134m-wertu = ' '.
delete g_t_mbew. "n450764
else. "n450764
enrich the entries with the quantity unit "n450764
move imara-meins to g_s_mbew-meins. "n450764
modify g_t_mbew from g_s_mbew "n450764
transporting meins. "n450764
endif.
endif.
endloop.
endform. " UNBEWERTET_WEG
*& Form FI_BELEGE_LESEN *
Lesen der Buchhaltungsbelege *
Beim Erfassen der Werte ist es notwendig, die Buchhaltungsbelege *
zum Material zu lesen, um abweichende Werte zwischen Wareneingang *
und Rechnungseingang sowie Nachbelastungen zu berücksichtigen. *
form fi_belege_lesen.
Not related to note 184465, but a significant performance issue
if ORGAN is large due to many plants/storage locations.
data: begin of t_bwkey occurs 0, "184465
bwkey like bsim-bwkey, "184465
end of t_bwkey. "184465
loop at g_t_organ where keytype = c_bwkey.
move g_t_organ-bwkey to t_bwkey-bwkey.
collect t_bwkey. "184465
endloop. "184465
read table t_bwkey index 1. "184465
check sy-subrc = 0. "184465
select * from bsim "n443935
into corresponding fields of table g_t_bsim_lean "n443935
for all entries in t_bwkey where bwkey = t_bwkey-bwkey
and matnr in matnr
and bwtar in bwtar
and budat >= datum-low.
loop at g_t_bsim_lean into g_s_bsim_lean. "n443935
perform f9300_read_organ
using c_bwkey g_s_bsim_lean-bwkey. "n443935
if sy-subrc is initial.
record found : the user has the authority, go on
move g_s_organ-bukrs to g_s_bsim_lean-bukrs. "n443935
modify g_t_bsim_lean from g_s_bsim_lean "n443935
transporting bukrs. "n451923
create working table with the keys for the FI documents
move-corresponding g_s_bsim_lean "n443935
to g_t_bkpf_key. "n443935
append g_t_bkpf_key.
else.
delete g_t_bsim_lean. "n443935
endif.
endloop.
endform. " FI_BELEGE_LESEN
*& Form BELEGE_SORTIEREN
Die Materialbelege werden anhand des Buchungsdatums sortiert.
Die Materialbelege mit Buchungsdatum zwischen 'datum-high'
und dem aktuellen Datum werden in der internen Tabelle IMSWEG
gesammelt, während die Materialbelege mit Buchungsdatum
zwischen 'datum-low' und 'datum-high' in der internen Tabelle
IMSEG verbleiben.
form belege_sortieren.
aktdat = sy-datlo + 30.
if not ( datum-high is initial or datum-high > aktdat ).
loop at g_t_mseg_lean into g_s_mseg_lean
where budat > datum-high.
move-corresponding g_s_mseg_lean to imsweg.
append imsweg.
delete g_t_mseg_lean.
endloop.
endif.
describe table imsweg lines index_2.
endform. " BELEGE_SORTIEREN
*& Form KONTIERT_AUSSORTIEREN
Aussortierung der kontierten Belegpositionen, *
da diese Mengen nicht bestandsrelevant sind *
form kontiert_aussortieren.
process table g_t_mseg_lean
loop at imseg where kzvbr <> space and "144845
( kzbew = 'B' or kzbew = 'F' ). "144845
read table imara with key matnr = imseg-matnr.
read table it134m with key mtart = imara-mtart.
if not it134m-mengu is initial and not it134m-wertu is initial.
Die Felder 'mengu' und 'wertu' (Mengen- bzw. Wertfortschreibung)
sind ab Release 3.0 D auch in die Tabelle MSEG aufgenommen.
Die Einträge in der Tabelle T134M stellen nach wie vor die generelle
Einstellung dar; auf Positionsebene sind jedoch Abänderungen möglich,
die anhand der Einträge in der Tabelle MSEG nachverfolgt werden
können.
delete imseg.
endif.
endloop.
data : l_f_bwkey like t001k-bwkey. "n497992
sort it134m by bwkey mtart. "n497992
loop at g_t_mseg_lean into g_s_mseg_lean
where kzvbr <> space
and ( kzbew = 'B' or kzbew = 'F' ).
get the valuation area "n497992
if curm = '3'. "n497992
valuation level is company code "n497992
if g_s_mseg_lean-bukrs is initial. "n497992
get the valuation area for this plant "n497992
perform f9300_read_organ "n497992
using c_werks g_s_mseg_lean-werks. "n497992
"n497992
move g_s_organ-bwkey to l_f_bwkey. "n497992
else. "n497992
move g_s_mseg_lean-bukrs to l_f_bwkey. "n497992
endif. "n497992
else. "n497992
valuation level is plant "n497992
move g_s_mseg_lean-werks to l_f_bwkey. "n497992
endif. "n497992
read table imara with key matnr = g_s_mseg_lean-matnr
binary search.
if sy-subrc is initial.
read table it134m with key bwkey = l_f_bwkey "n497992
mtart = imara-mtart "n497992
binary search.
if sy-subrc is initial.
if not it134m-mengu is initial and
not it134m-wertu is initial.
delete g_t_mseg_lean.
endif.
endif.
else.
delete g_t_mseg_lean.
endif.
endloop.
endform. " KONTIERT_AUSSORTIEREN
*& Form BELEGE_ERGAENZEN (engl. enrich documents)
Material documents and FI documents from BSIM are merged together.
Complications:
- A material document can have more than one FI document.
- There are FI documents without material documnts
- There are material documents without FI documents
- The document type is customizeable
- There is no link from the materia document position to
the FI document entry in BSIM (except URZEILE, but this
can be filled incorrectly)
form belege_ergaenzen. "Version from note 204872
- show the current activity and the progress "n599218
call function 'SAPGUI_PROGRESS_INDICATOR' "n599218
exporting "n599218
text = text-061. "Reading FI documents "n599218
Eliminate material documents with valuation string, but without
relevance to the valuated stock. IT156W contains all valuation
strings with posting key BSX. XBGBB says: "I am an accrural posting".
For more details please ask Big-G.
loop at g_t_mseg_lean into g_s_mseg_lean.
special processing for tied empties active ? "n497992
if not g_cust_tied_empties is initial. "n497992
look for MM documents with xauto = L and change "n497992
indicators "n497992
case g_s_mseg_lean-xauto. "n497992
when 'X'. "n497992
when space. "n497992
when others. "n547170
range table g_ra_xauto contains the special "n547170
indicators for the transfer movements of the "n547170
tied empties "n547170
if g_s_mseg_lean-xauto in g_ra_xauto. "n547170
move g_s_mseg_lean-xauto "n497992
to g_s_mseg_lean-retail. "n497992
clear g_s_mseg_lean-xauto. "n497992
modify g_t_mseg_lean from g_s_mseg_lean "n497992
transporting xauto retail. "n497992
endif. "n547170
endcase. "n497992
endif. "n497992
read table it156w with key
bustw = g_s_mseg_lean-bustw
xbgbb = g_s_mseg_lean-xauto
transporting no fields
binary search.
if sy-subrc <> 0.
delete g_t_mseg_lean.
else. "n443935
enrich the current entry with the company code "n443935
perform f9300_read_organ "n443935
using c_werks g_s_mseg_lean-werks. "n443935
"n443935
check : sy-subrc is initial. "n443935
move g_s_organ-bukrs to g_s_mseg_lean-bukrs. "n443935
modify g_t_mseg_lean from g_s_mseg_lean "n443935
transporting bukrs. "n451923
endif.
endloop.
For all available FI documents from BSIM, read the header data
from BKPF to get the link to the originating material document.
if not g_t_bkpf_key[] is initial.
look for the header of the matching FI documents
sort g_t_bkpf_key by bukrs belnr gjahr.
delete adjacent duplicates from g_t_bkpf_key.
save result from database selection into global hashed "n856424
table g_t_bkpf "n856424
select * from bkpf "n856424
into corresponding fields of table g_t_bkpf "n856424
for all entries in g_t_bkpf_key
where bukrs = g_t_bkpf_key-bukrs
and belnr = g_t_bkpf_key-belnr
and gjahr = g_t_bkpf_key-gjahr.
if sy-subrc is initial.
create working table l_t_keytab_m
free g_t_bkpf_key.
loop at g_t_bsim_lean into g_s_bsim_lean. "n443935
enrich the working table g_t_bsim_lean with the "n443935
MM doc info "n443935
"n443935
look for the matching FI document header "n443935
read table g_t_bkpf assigning "n856424
with key bukrs = g_s_bsim_lean-bukrs "n443935
belnr = g_s_bsim_lean-belnr "n443935
gjahr = g_s_bsim_lean-gjahr. "n443935
"n443935
if sy-subrc is initial. "n443935
enrich table G_T_BSIM_LEAN with the MM doc "n443935
consider only FI docs created by MM docs here "n856424
check :Hi Ravi,
possibly a service pack has been installed just in the time when you created the copy. I found
data: lt_sort type kkblo_t_sortinfo. "n890109
in the include mentioned on our system. Please check if the includes are identical in development and production server (remote-compare from editor).
But we also have a copy of this in our system. In the copy I found type name like alv_type_sortinfo but no kkblo_t_sortinfo.
Note KKBLO was the predecessor of ALV.
Must have to dio something with version changed by service pack.
Regards,
Clemens -
Facing problem during uploadation of Routing data using CA01-BDC - URGENT
Dear All,
When I am trying to upload Routing data using CA01 in the Table Control scenario, then I am facing problem as my last 2 records are not getting uploaded from my Test file.
For example, I am having 47 records in my Test File and after setting Default size parameters (to avoid screen resolution problem)
I have 15 table control line items data per page. The Page down logic ('=P+') is working fine, but my below BDC code failed to take
the remainder last 2 records from the Test File.
Analysis: When I am running my Call Transaction bdc in foreground, then the 1st page down occurs after 15th record, 2nd page down occurs after 29th record( as in Table Control 1st pages 15th record is coming on the Top of 2nd page). 3rd page down occurs after 43rd record
(as 2nd pages 29th record is coming on the top of 3rd page). In the 4th Table Control Page 43rd record of previous page is coming on top, and then its taking 44th & 45th records from the Test File and then it is triggering SAVE (=BU). Thus, our last 2 records
(i.e. 46th, 47th record) are not getting uploaded in the routing screen from our Test File.
If anybody has encountered this scenario previously, please help me URGENTLY in fixing the bugs here. Its VERY, VERY URGENT
FYI. For others 45 successful records already uploaded, all the screen fields values are coming properly in the routing screen, and here there is no issue.
Thanks very much
Thanks & Regards
Sudipta Project Lead
Volvo Client Location
I am pasting my BDC source code below:
REPORT ZRT1_UPLOAD_CA01_F
NO STANDARD PAGE HEADING
LINE-SIZE 255.
I N C L U D E S *
Include for Data Declarations
INCLUDE zrout_top.
Include for Forms
INCLUDE zrout_form.
INCLUDE zrout_include_f_ca01.
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR <field>
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
Attaching F4 help with filename
PERFORM F1001_GET_F4.
S T A R T - O F - S E L E C T I O N *
START-OF-SELECTION.
Perform to read the input file
PERFORM f_read_file.
Perform to fill the BDC data
PERFORM f_fill_bdctab.
E N D - O F - S E L E C T I O N *
END-OF-SELECTION.
FREE: i_bdcdata,
i_messtab,
i_record.
x----
*& Include ZROUT_TOP *
D A T A B A S E T A B L E S *
TABLES: t100. "Messages
D A T A D E C L A R A T I O N S *
T A B L E T Y P E S *****************************
For input data
TYPES: BEGIN OF ty_record,
matnr(18), "Material Number
werks(4), "Plant
verwe(3), "Usage
statu(3), "Status
arbpl(8), "Work Center
steus(4), "Control Key
ltxa1(40), "Description of Operation
bmsch(13), "Base Quantity
meinh(3), "Unit of Measure
vgw01(11), "Machine
vge01(3), "Unit of measure of activity
END OF ty_record.
I N T E R N A L T A B L E S ***********************
Internal Table for input file name
DATA: i_file_tab TYPE STANDARD TABLE OF sdokpath INITIAL SIZE 0.
Internal Table for BDC Data
DATA: i_bdcdata TYPE STANDARD TABLE OF bdcdata INITIAL SIZE 0.
Internal Table for BDC Messages
DATA: i_messtab TYPE STANDARD TABLE OF bdcmsgcoll INITIAL SIZE 0.
Internal Table for Input file
DATA: i_record TYPE STANDARD TABLE OF ty_record INITIAL SIZE 0.
W O R K A R E A S *************************
Work Area for input file name
DATA: wa_file_tab LIKE sdokpath.
Work Area for BDC Data
DATA: wa_bdcdata LIKE bdcdata.
Work Area for BDC Messages
DATA: wa_messtab LIKE bdcmsgcoll.
Work Area for Input file
DATA: wa_record TYPE ty_record.
V A R I A B L E S ****************************
DATA: v_filename TYPE string,
v_fnam(40) TYPE c.
DATA: wa_opt TYPE ctu_params.
C O N S T A N T S ***************************
CONSTANTS: c_werks TYPE rc27m-werks VALUE 'tp',
c_steus TYPE plpod-steus VALUE 'PP01'.
*Selection Screen.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS:
Input file name
P_FILE TYPE rlgrap-filename OBLIGATORY. " DEFAULT 'C:\'.
SELECTION-SCREEN END OF BLOCK B1.
x----
*& Include ZROUT_FORM *
*& Form f_fill_bdctab
Form to fill the BDC Data
FORM f_fill_bdctab.
TABLES mapl. "Assignment of Task Lists to Materials
DATA: l_cnt_item(3) TYPE n VALUE 1. "Line item counter
DATA: first(3) TYPE n VALUE 16. "Line item counter
DATA: next(3) TYPE n . "Line item counter
DATA: lin(3) TYPE n . "Line item counter
DATA: l_v_bmsch(13), "Base qty
l_v_meinh(3), "Unit of Measure
l_v_vgw01(11), "Machine
l_v_vgw02(11), "Labour
l_v_vge01(3). "Unit of measure of activity
DATA l_v_nextline TYPE sy-tabix.
DATA wa_temp TYPE ty_record.
Initialize Counter
l_cnt_item = 1.
SORT i_record BY matnr.
LOOP AT i_record INTO wa_record.
AT NEW matnr.
REFRESH: i_bdcdata,
i_messtab.
SET PARAMETER ID 'PLN' FIELD space.
SET PARAMETER ID 'PAL' FIELD space.
PERFORM f_bdc_dynpro USING 'SAPLCPDI' '1010'.
PERFORM f_bdc_field USING 'BDC_OKCODE'
'/00'.
Material Number
PERFORM f_bdc_field USING 'RC27M-MATNR'
wa_record-matnr.
Plant
PERFORM f_bdc_field USING 'RC27M-WERKS'
c_werks.
PERFORM f_bdc_field USING 'RC271-PLNNR'
Check if routing already exits for the material
SELECT * FROM mapl
INTO mapl
WHERE matnr EQ wa_record-matnr
AND werks EQ c_werks
AND plnty EQ 'N'.
IF sy-subrc EQ 0.
PERFORM f_bdc_dynpro USING 'SAPLCPDI' '1200'.
PERFORM f_bdc_field USING 'BDC_OKCODE'
'=ANLG '.
ENDIF.
ENDSELECT.
perform f_bdc_dynpro USING 'SAPLCPDA' '1200'.
perform f_bdc_field USING 'BDC_OKCODE'
'=VOUE'.
Group Counter
perform f_bdc_field USING 'PLKOD-PLNAL'
Usage
PERFORM f_bdc_field USING 'PLKOD-VERWE'
'1'.
Status
PERFORM f_bdc_field USING 'PLKOD-STATU'
'4'.
ENDAT.
PERFORM f_bdc_dynpro USING 'SAPLCPDI' '1400'.
Check if page is full
IF l_cnt_item EQ '16'.
Page down
PERFORM f_bdc_field USING 'BDC_OKCODE'
'=P+'.
l_cnt_item = 1.
ELSE.
PERFORM f_bdc_field USING 'BDC_OKCODE'
'/00'.
ENDIF.
CLEAR v_fnam.
Populate item level details
Work Center
CONCATENATE 'PLPOD-ARBPL(' l_cnt_item ')' INTO v_fnam.
PERFORM f_bdc_field USING v_fnam
wa_record-arbpl.
Control Key
CONCATENATE 'PLPOD-STEUS(' l_cnt_item ')' INTO v_fnam.
PERFORM f_bdc_field USING v_fnam
c_steus.
Description of Operation
CONCATENATE 'PLPOD-LTXA1(' l_cnt_item ')' INTO v_fnam.
PERFORM f_bdc_field USING v_fnam
wa_record-ltxa1.
Base Quantity
CONCATENATE 'PLPOD-BMSCH(' l_cnt_item ')' INTO v_fnam.
PERFORM f_bdc_field USING v_fnam
wa_record-bmsch.
Unit of Measure
CONCATENATE 'PLPOD-MEINH(' l_cnt_item ')' INTO v_fnam.
PERFORM f_bdc_field USING v_fnam
wa_record-meinh.
Machine
CONCATENATE 'PLPOD-VGW01(' l_cnt_item ')' INTO v_fnam.
PERFORM f_bdc_field USING v_fnam
wa_record-vgw01.
Labour
CONCATENATE 'PLPOD-VGW02(' l_cnt_item ')' INTO v_fnam.
PERFORM f_bdc_field USING v_fnam
wa_record-vgw02.
Unit of measure of activity
CONCATENATE 'PLPOD-VGE01(' l_cnt_item ')' INTO v_fnam.
PERFORM f_bdc_field USING v_fnam
wa_record-vge01.
l_cnt_item = l_cnt_item + 1.
CLEAR wa_record.
AT END OF matnr.
PERFORM f_bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM f_bdc_field USING 'BDC_OKCODE'
'=BU'.
wa_opt-DISMODE = 'A'.
wa_opt-DEFSIZE = 'X'.
wa_opt-UPDMODE = 'S'.
PERFORM f_bdc_transaction USING 'CA01'.
Initialize Counter
l_cnt_item = 1.
ENDAT.
ENDLOOP.
ENDFORM. " f_fill_bdctab
x----
*& Include ZROUT_INCLUDE_F_CA01 *
*& Form f_read_file
Form to read the file from presentation server
FORM f_read_file .
To get the file name
DATA l_v_file TYPE string.
l_v_file = P_FILE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = l_v_file
filetype = 'ASC'
has_field_separator = 'X'
TABLES
data_tab = i_record
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
ENDFORM. " f_read_file
*& Form f_bdc_dynpro
Form to populate BDC Tab for new screen
-->fp_program Screen program name
-->fp_dynpro Screen Number
Start new screen *
FORM f_bdc_dynpro USING fp_program fp_dynpro.
CLEAR wa_bdcdata.
wa_bdcdata-program = fp_program.
wa_bdcdata-dynpro = fp_dynpro.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO i_bdcdata.
ENDFORM. "f_bdc_dynpro
*& Form f_bdc_field
Insert field *
FORM f_bdc_field USING fp_fnam fp_fval.
IF NOT fp_fval IS INITIAL.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = fp_fnam.
wa_bdcdata-fval = fp_fval.
APPEND wa_bdcdata TO i_bdcdata.
ENDIF.
ENDFORM. "f_bdc_field
*& Form f_bdc_transaction
Call transaction and error handling
-->fp_tcode Transaction code
FORM f_bdc_transaction USING fp_tcode.
DATA: l_mstring(480),
l_color TYPE i,
l_mode TYPE c.
REFRESH i_messtab.
CALL TRANSACTION fp_tcode USING i_bdcdata
OPTIONS FROM wa_opt
MESSAGES INTO i_messtab.
Messages during upload
LOOP AT i_messtab INTO wa_messtab.
CASE wa_messtab-msgtyp.
WHEN 'S'.
l_color = 5.
WHEN 'E'.
l_color = 6.
WHEN 'W'.
l_color = 3.
ENDCASE.
FORMAT COLOR = l_color.
SELECT SINGLE * FROM t100 WHERE sprsl = wa_messtab-msgspra
AND arbgb = wa_messtab-msgid
AND msgnr = wa_messtab-msgnr.
IF sy-subrc = 0.
l_mstring = t100-text.
IF l_mstring CS '&1'.
REPLACE '&1' WITH wa_messtab-msgv1 INTO l_mstring.
REPLACE '&2' WITH wa_messtab-msgv2 INTO l_mstring.
REPLACE '&3' WITH wa_messtab-msgv3 INTO l_mstring.
REPLACE '&4' WITH wa_messtab-msgv4 INTO l_mstring.
ELSE.
REPLACE '&' WITH wa_messtab-msgv1 INTO l_mstring.
REPLACE '&' WITH wa_messtab-msgv2 INTO l_mstring.
REPLACE '&' WITH wa_messtab-msgv3 INTO l_mstring.
REPLACE '&' WITH wa_messtab-msgv4 INTO l_mstring.
ENDIF.
CONDENSE l_mstring.
WRITE: / wa_messtab-msgtyp, l_mstring(250).
ELSE.
WRITE: / wa_messtab.
ENDIF.
FORMAT COLOR OFF.
ENDLOOP.
SKIP.
ENDFORM. " f_bdc_transaction
FORM F1001_GET_F4.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
PROGRAM_NAME = SY-REPID
DYNPRO_NUMBER = SY-DYNNR
FIELD_NAME = P_FILE
CHANGING
FILE_NAME = P_FILE
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
File is not selected
MESSAGE I000 WITH TEXT-M01.
ENDIF.
ENDFORM. " F1001_GET_F4Sudipta,
Would request you to post this to ABAP-Forum for Immediate response.
I had this problem, but the ABAP guy did something to correct this...it was more of screen resoultion difference between the recorded system and uploading system. Please try to use the same system which was used to record and try.
Regards,
Prasobh -
Facing problem with a date column in select query
Hi,
I am facing problem with a date column. Below is my query and its fainling with " invalid number format model" .
Query: SELECT *
FROM EMP
WHERE trunc(LAST_UPDATED) >= to_date(to_char(22-05-2009,'dd-mm-yyyy'),'dd-mm-yyyy')
LAST_UPDATED column is "DATE" data type.
Please help me ThanksRadhakrishna Sarma wrote:
SeánMacGC wrote:
WHERE LAST_UPDATED >= to_date('22-05-2009','dd-mm-yyyy');
You do not need the TRUNC here in any case.
I don't think so. What if the user wants only data for 22nd May and the table has records with date later than 22nd also? In that case your query willl not work. In order for the Index to work, I think the query can be written like this I think Sean is right though. Use of TRUNC Function is quiet useless based on the condition given here, since the to_date Function used by OP will always point to midnight of the specified date, in this case 22-05-2009 00:00:00.
Regards,
Jo
Edit: I think Sean proved his point... ;)
Maybe you are looking for
-
I had to reinstall Mountain Lion 10.8.2 on my iMac. Now when I try to open iPhoto i get a pop up saying my photo library was created by a newer version. Did I miss an update or what
-
T61, OCZ Agility 3 doesn't fit in the HDD cage
Hi all So, I finally bought myself an SSD for my old ThinkPad. Works wonderfully - except that it doesn't fit quite right. The OCZ Agility 3 is slightly too wide for the HDD cage, on the bottom of the drive. Recall that the drive sits bottom side up
-
Problem in Opening the Catalog Manager
Hi Gurus, Recently we have migrated to the OBI EE version 10.1.3.4 While opening the catalog manager: Start --> All Programs --> Oracle Business Intelligence --> Catalog Manager When Clicked on the catalog manager then it is throwing the below error:
-
Hi All, I can see workflow for object when i click play like button just beside actions button on transaction in GUI. Where i can see the same thing on crm webui. Is there any specific assignment block . I want to see workflow overview on that parti
-
How to set field "third party" in the Web Adi, General Ledger - Journals?
Hello, We are trying to find how to set the field "Third Party" in the template WebAdi, and validate data and also can display in the form of general ledger journals. thanks for the collaboration.