Facing problem in Number Range Allocation for Objects in OM

Hello Friends,
I have couple of questions in setting number range for Objects OM :
1) Can we set one single number range for the objects in all planned versions or do we need to set different number ranges for varous planned versions?
2) If we are already using existing Internal Number Range in $$$$ for Objects in OM, how do we set number range External Number range to use it for forthcoming object creation?
3) If we set the External Number Range, will the system use the set num range combinedly for all object types or individually for each object type (Ex: If we have an external num range 100~200, then while creating Org Unit the system may take 100 after that if we try to create another Org Unit the system may take 101 in seqeuence. After creating these two Org Units, if we try create an Position object will the system start allocating the number from 102 or will it again start from 100)
4) Can we default number ranges for various Object Types Planned version wise? If YES, what feature is used to default this number range?
Regards
Tharak

Hi,
For 1). Yes you can set number ranges for all plan versions.
2. You can devide like this.
IN - 00000001 to 49999999
EX - 50000000 to 99999999 - EXT.
3. In my view it is applicable to all Objects.
4. Don't know.
Reward me if helps.
Thanks,
vasu.

Similar Messages

Number range R4 for object BANF nearly exhausted

Dear,
when I use MD15 to convert Planned order to PR, this error message shows up "number range R4 for object BANF nearly exhausted"
I know the range of PR number is nearly exhausted. but could someone teach me how to check it. I mean use which transaction to check what BANF stands for...
Best regards
Meng HM

>
Meng HM wrote:
> Dear,
>
> when I use MD15 to convert Planned order to PR, this error message shows up "number range R4 for object BANF nearly exhausted"
> I know the range of PR number is nearly exhausted. but could someone teach me how to check it. I mean use which transaction to check what BANF stands for...
>
> Best regards
>
> Meng HM
Check this path: spro>MM>Consumption based planning>number ranges>define NR for planning run, execute and maintain the interval of planned orders.
Then apply this internval in OPPQ, under number range button.
Edited by: Afshad Irani on Aug 30, 2010 10:34 AM

Number range 01 for object BANF is nearly exhausted.

Hi ! When we do total planning run in the background we got the message "Number range 01 for object BANF is nearly exhausted.". Our system is configured to create a new purchase requisition for every requirement. I can found that we have reached 98% of our PR number range and the warning message (through SNRO) is set at 2%. As a temporary solution, before I assisgn a new number range to PR, I reduced the percantage for warning message to 1% so that we can get few more days before the number range is changed. But, we continue to get the same error and no purchase requisition is created. Kindly help and suggest.
regards,
Satya

this is probably caused by the buffering. Buffering of numbers is made to increase performance. the Program reads the number range just once to get 10 numbers (and the percentage for the warning message as well, otherwise it would not make sense to use buffers if SAP has to access the number range anytime to check if it is nearly exhausted )

Number range interval for characteristic 0CSTELMNTYP is missing

All,
I'm moving the infoobject 0COSTELMNT, which has as a nav attribute 0CSTELMNTYP. The transport moved fine to my Q environment, but not to prod, The error was as above and
Number range interval for characteristic 0CSTELMNTYP is missing
Message no. BRAIN049
Diagnosis
The interval for number range object BIM0001194 of characteristic 0CSTELMNTYP is missing. The interval is created automatically, when you run the system in the BW clients.
Procedure
Execute the corresponding action again in the BW clients, so that the interval is created automatically. Then you can drag numbers for the characteristic 0CSTELMNTYP to other clients.
I don't understand this - what do I need to do?
Thanks.
Dave

Hi Kedar,
I got the same issue which you mentioned and i ran the program to activate the master data object and it went fine in Quality system. But the problem here is iam unable to see the attribute data in the master data info object.
For example i added ZCNTYCODE nav. attribute to 0VENDOR and moved to quality and i got the activation problem issue for 0VENDOR and i ran the program which you mentioned in Quality and the activation went fine.
When i loaded the data for 0VENDOR iam not able to see the ZCNTYCODE data in Vendor master data P table. And iam able to see the master data in the table which we get from source LFA1 and in RSA3 and also in the PSA. Can you or anyone faced this type of issue.
Thanks for you help in Advance.
Sudhakar

Number range missing for characteristic 0AF_SEAN after importing request

Hii friends,
I m facing one problem while transporting request from development to quality , the request contains info object 0MATERIAL in which i have added new attribute 0AF_SEAN.
Then error which i m getting is ,
Number range interval for characteristic 0AF_SEAN is missing
Error when activating InfoObject 0MATERIAL
Characteristic 0MATERIAL: Error when generating master data routines
Error when resetting InfoObject 0MATERIAL to the active version
I am waiting for ur positive reply.
Thanks & Regds,
Kavan Shah

hi Kavan,
try
transaction rsrv ? >> all elementry tests >> master data >> compare number range and maximum sid >> execute. press button 'correct error' if any error exists
Error calling number range object 0MATERIAL for dimension D4 ( )
or check oss note 903291 ?
Manual solution
Get the name of the number range object from the error message shown above, for example, RS_OBJNUMG. Start Transaction SNRO. To display the intervals, use the number range function key and enter the name of the number range object as the object name. Change the intervals. The following from-numbers and to-numbers apply:
- RS_OBJNUMG: 0000001 - 9999000
- RSDDAGCUBE: 100000 - 199999
- RSSBRAUTH: 00000001 - 99999999
BW 3.0B
Import Support Package 30 for 3.0B
BW 3.10 Content
Import Support Package 24
BW 3.50
Import Support Package 16
BW 7.0
Import Support Package 07
Transporting DataSources
hope this helps.

PO create error u2018Number range ZB for object not definedu2019

Dear all
I have a error in ME21N to create PO,When I click save button,then occurs a error u2018Number range ZB for object not definedu2019.
I define a PO types:u2019Z506u2019 and assigned to the Number Range u20185Hu2019.The u20185Hu2019 is from 5070000001 to 5079999999 not ext.
The u2018ZBu2019 number range is defined PR,not PO.So I donu2019t know where does define wrong?
Please help me!
Thanks
Sun

Hi
Please check if you have Defined the Number ranges for Document type ZNB in
SPRO-> Materials Management-> Purchasing-> Purchase Requisition-> Define Number Ranges
The reason the error is Coming like that is, in the Customizing of PO Doucment types in
SPRO-> Materials Management-> Purchasing-> Purchase Order-> Define Document Types-> Link purchase requisition - document type
here you have maintained the Link for the PR & The PO.
Thanks & Regards
Kishore

J1i5 gives number assignment error for object j_1irg1

Hi Friends,
while executng j1i5 for update of RG1 register , system gives error "Number not assigned for object j_1irg1" whearas it is already maintained for the specified excise group(30 in my case & doc year 2008) via snro. Friends, Pl let me know where else I need to do any settings required for this.
Thanks & Best Regards,
Atul K

Dear Atul,
Check with:
T. Code: SNUM
Object: J_1IRG1
Excise Group: 30
Maintain the Number Range for the Financial Year.
Best Regards,
Amit
Note: Alternatively, check the same with:
T. Code: J1I9

I have number range issue for fi posting.

hi gurus,
i have number range issue for fi posting (fb01,fb50).
problem in updating table glpca due to duplication of record.
INSERT GLPCA FROM TABLE T_GLPCA .
With Regards,
Shakthi Raj N.

error msg after generating document no and it is not getting updated in data base
error msg
"Express document "Update was terminated" received from author "ecciabap""
Client.......   750
User.....   ECCIABAP
Transaction..   FB01
Update key...   C83B07DE4DADF13CB4950017A4AB8015
Generated....   02.03.2009, 20:37:23
Completed....   02.03.2009, 20:37:23
Error Info...   00 671: ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC

External Number Range setting for Equipment Not working

As per the Requirement I have assigned A00000000000 - ZZZZZZZZZZZZ to an equipment category through OIEN.
but I am getting the error message in the IE01 screen whenever I try to create an equiment with some external number for this category.
Equipment category does not allow alphanumeric equipment number
Can some one help whether anyother settings are needed.
(It is to be noted that system gives correct error message if I try to create equipment without giving external number - No internal number range defined for equipment category)
Regards
Jogeswara Rao

Hi Jogeswara Rao,
Check you other post for reply
Plant Maintenance & Customer Service->Master Data in Plant Maintenance and Customer Service->Technical Objects->Equipment->Equipment Categories >>>> Maintain Equiment Category >>>> select your category and check whether you have ticked "No Alphanumeric Equipment Numbers" or not.

Getting number range interval for document type

Hi All,
My requirement is to display number range interval for any docnument type in SD.
I will elaborate my req. clearly.
We can see document type of SD in TVAK table. If we give document type for ex. ZOR the we will see number range internal assignment (NUMKI). The complete number range we can search through transaction VN01 through NUMKI value. But I didnt get any table to relate NUMKI or Sales document type and internal number range.
Please help me in searching database table to relate Document type or NUMKI and internal number range.
Regards,
Suresh.

Relation is as below:
TVAK --> AUART = "Sales Document Type"
NRIV --> OBJECT = "RV_BELEG" and
NRRANGENR = TVAK-NUMKI
Alternatively you can use FM: NUMBER_GET_INFO with the Number Range Number and Object to extract Intervals.
Regards
Eswar

Maintain Number range group for Internal order

Hello,
I have created Internal order type, now, i would like to create/maintain the number range group for this already created order type.
When i goto Maint Number ranges for orders->click on Group->Maint and again click on group insert... when i mention here the group name and number range for that group and say save the system in accepting but when view all the groups, i do not find this new group created by me.
How do i view the newly created group, is there any other steps to be followed? please advice.
regards,
radhakrishna

Hi:
It's a little late for this post but it is still important to record.
When you try to create a group in KONK transaction, the system doesn't show the new group.
This is because there are a inconsistences in the old groups.
You must execute RSSNR0T1 program to solve the problem.
Greetings
Marco

Problem in Number range Interval in VF02

Hi All,
I am using Number range USEREXIT for invoice creation- VF01.
So, while creating invoice, userexit will trigger, as per our logic provided,system generating numbers as expected.- which is working fine.
Where as, in VF02, transaction , i was trying to release invoice to Accounting,
system prompts with the below error message.
Fyi, in my invoice doc type: Number range- interval-19, which has numbers mentioned in the error message below:
am expecting, that when i release invoice to accounting from VF02 transaction, system triggering number range from invoice doc type,- But I dont understand, why it is triggering number range interval again, for which number is already createed in VF01
Error Message:
Incorrect doc.no.: 9003000002. Select document number between 0090000000 and 0094999999
Can someone, have any inputs??
Thanks in advance

Hi,
You can make use of exit userexit_number_range inside RV60AFZZ.
Regards,
Babul.

Mass deletion of document number ranges intervals for several company codes

Dear experts,
We are running version ECC6 and are about to go-live a lot of company codes simultaneously. We would like to delete satndard number ranges intervals for these company codes.
Is there a way to delete the number ranges intervals (which have not been used) for several company codes at the same time ? I'm looking for a transaction or a program similar to OBH1 (used for the creation of number ranges ).
Thanks in advance for your help.
Best Regards,
Steven

Hi
I am also not aware of such T.code to delete number ranges for a company code.
Alternatively, you can go to FBN1 in change intervals mode.
From the Menu Select all and Press Shift + F2 (Delete interval).
Ofcourse, this have to be done individually for each co. code.
Regards

Problem in number range - TX.1-spot forward transaction

While creating spot/forward transaction in TX.1, I have found the following error message:
1     "Number Range does not exist"
     I left the field " External Number assignment - Trans" in TX.1 is blank
     For information, I've set the configuration for number range in IMG as follow:
     -"number range for each transaction type" is blank
     - number range interval for financial transaction for each company code is 'unthick' for field Ext.number range
2     " Number range 01 does not exist"
     For information, I've set the configuration for number range in IMG as follow:
     - I changed the configuration with put number 01 for number range setting for each transaction type.
     - for number range interval for company code is remain the same.
why the above error is occurred?
How the number ranges configuration should be?
Kindly advice me
Thank you in advance

Hi,
You can make use of exit userexit_number_range inside RV60AFZZ.
Regards,
Babul.

Problem in Number range tranfer-OBH2

Dear Gurus,
I have a problem in number Range of OBH2- tanfer
i given company code and number range and specified the fiscal year and target year.
But system showing List contains no data.
Help me where i can check, anything i missed.
Regards
sreenivas.P

Hai Sree,
While copying the no ranges from target company code first u can check the whether no ranges are there or not then copy the no ranges
Regards
Madhu I

Facing problem in Number Range Allocation for Objects in OM

Similar Messages

Maybe you are looking for