Facing problem in placing portlets in Web Layout

I am facing problem in placing portlets on Web layout page-
1. I am getting some space between the regions. I want that my portlet should join adjacent only not even a single pixel gap should be there.
2. In Web Layout, First region is the left most and after that subsequent region comes right to first region and one after other. But my second and third region's portlet are coming adjacent instead of third region's portlet coming under second region's portlet
Please help...............

The first issue is a bug/feature that has been changed in 3.0.8 (9iAS MR1) due out this week. In previous releases we added spacing arbitrarily. Now, you can define the spacing in the region properties.
I don't understand issue number 2. Can you clarify the problem?

Similar Messages

Facing problem in placing portlet on Web Layout

I am facing problem in placing portlets on Web layout page-
1. I am getting some space between the regions. I want that my portlet should join adjacent only not even a single pixel gap should be there.
2. In Web Layout, First region is the left most and after that subsequent region comes right to first region and one after other. But my second and third region's portlet are coming adjacent instead of third region's portlet coming under second region's portlet
Please help...............

The first issue is a bug/feature that has been changed in 3.0.8 (9iAS MR1) due out this week. In previous releases we added spacing arbitrarily. Now, you can define the spacing in the region properties.
I don't understand issue number 2. Can you clarify the problem?

Facing problem in placing and receiving calls in l...

Bought my lumia 720 a week ago. For past two days, i am facing problems during calls. Most of the my voice isn't audible to the receiver. It's happening during incoming calls and outgoing calls both. Its freakishly frustarting. Pls help me out.
Note: I am able to hear the voice of the caller clearly.
Thanks,
Adnan

I purchased Nokia Lumia 720 a week ago. Since than, I am facing sound fade problem while making call. The dstination number can hear my voice clearly, but I hear the voice getting **bleep**. Seems there is something extra noise.I tried with another network sim, but same result. The problem is persist even I change the sim. I can't hear the other party voice clearly .. Please help to fix the issue.. I've purchased from nokia care and have warranty card for 1 year. Thanks

Facing problem in transportation of web Interface

Hi BPS Experts,
I am facing problem in transporting the web interface.
As part of one enhancement I have made some changes to one of the objects in web Interface in Integration system. Before doing transportation to consolidation, generated the new BSP application as well as saved the customized changes under one request for transport.
Used the request number for Transporting to consolidation. The Layout in the consolidation is displaying error message as follows
*Error with initialization or error on BSP*
Component with name Group_Selection1 does not exist
BSP application ZEBSP08_RF does not exist. Regenerate
and when i check the web interface under BPS_WB transaction in consolidation. i able to see the change in objects which i made in integration.
Please help in solving this problem in Layout.
Thanks in Advance,
Anil.

Hi Ravi,
Create the same function group and send it into test system with another TR.
Once it get transported to test system, try to activate FM & FG.
Reward points if it helps,
Satish

Publish web layout of jsp report as portlet

Hi All:
Please let me know how can i run web layout of jsp report and publish it as portlet?
I have successfully deployed my jsp report(web layout),namely my_rpt.jsp, as a J2EE application and when i write URL direlctly in address bar of browser it runs successfully.
I have also published (as portlet) successfully my_rpt.jsp, with "execute" type "servlet", and it runs paper layout of report.
But i m unable to run the web layout of this report,with "execute" type "JSP"
i have provided "Oracle Reports Web Gateway URL for JSP reports " = http://webserver.domain_name:port/
Please help me out whats the problem and how can i run my jsp report with web layout?.One thing more its not the problem with only my_rpt.jsp
but other reports also shows the same behaviour.
Any suggestion/solution would be highly appreciated.
Regards
Sam

Hi sam ,
Can you please tell me full process of to publish the report made in report builder in a portal (portlets). i am new to portal .
can u please provide me guidance
thanx
anand

Facing problem while going to catch return result from web-services.

Hi everybody,
I am new to BPEL. I am facing problem while going to catch the attributes of resultsets returning from web-services(QAS). As far as my knowledge, two types of results it should return - XML entities and another is attributes which is coming as the part of XML entitites. I am able to catch the XML entities, but can't catch the attributes under it. Even, I am not able to see whether web-services returning something within that field.
When, I tried to catch the attribute and store to a temporary varilable using the following code:
*<assign name="AssignQASDoGetAddress1">*
*<copy>*
*<from variable="InvokeQAS_DoSearch_OutputVariable"*
part="body"
query="/ns6:QASearchResult/ns6:QAPicklist/ns6:PicklistEntry/@PostcodeRecoded"/>
*<to variable="temp"/>*
*</copy>*
*</assign>*
but, I am facing the following selectionFailure errors after running it:
*"{http://schemasxmlsoap.org/ws/2003/03/business-process/}selectionFailure" has been thrown.*
-<selectionFailure xmlns="http://schemasxmlsoap.org/ws/2003/03/business-process/">
-<part name="summary">
*<summary>*
empty variable/expression result.
xpath variable/expression expression "bpws:getVariableData('InvokeQAS_DoSearch_OutputVariable', 'body', '/ns6:QASearchResult/ns6:QAPicklist/ns6:PicklistEntry/@PostcodeRecoded')" is empty at line 269, when attempting reading/copying it.
Please make sure the variable/expression result "bpws:getVariableData('InvokeQAS_DoSearch_OutputVariable', 'body', '/ns6:QASearchResult/ns6:QAPicklist/ns6:PicklistEntry/@PostcodeRecoded')"is not empty.
*</summary>*
*</part>*
*</selectionFailure>*
Getting this error it seems to me that web-service is returning nothing, but, it returns something as it has been catched using a method called isPostcodeRecoded() Java Code in Oracle ADF. This method has been used as it should return boolean whereas for catching the xml entities using java code we used the method like getPostcode(), getMoniker().
For your information, we are using Jdeveloper as the development tool for building the BPEL process.
Am I doing any syntax error. Please consider it as urgent and provide me asolution.
Thanks in advance.
Chandrachur.

Thanks Dave and Marc, for your suggestions. Actually what I found is QAS web-service is returning nothing as attributes when the attributes are set to the default value. For example, following is the part of the wsdl of the result which QAS webservice returns.
<xs:element name="QASearchResult">
- <xs:complexType>
- <xs:sequence>
<xs:element name="QAPicklist" type="qas:QAPicklistType" minOccurs="0" />
<xs:element name="QAAddress" type="qas:QAAddressType" minOccurs="0" />
</xs:sequence>
<xs:attribute name="VerifyLevel" type="qas:VerifyLevelType" default="None" />
</xs:complexType>
</xs:element>
<xs:complexType name="QAPicklistType">
- <xs:sequence>
<xs:element name="FullPicklistMoniker" type="xs:string" />
<xs:element name="PicklistEntry" type="qas:PicklistEntryType" minOccurs="0" maxOccurs="unbounded" />
<xs:element name="Prompt" type="xs:string" />
<xs:element name="Total" type="xs:nonNegativeInteger" />
</xs:sequence>
<xs:attribute name="AutoFormatSafe" type="xs:boolean" default="false" />
<xs:attribute name="AutoFormatPastClose" type="xs:boolean" default="false" />
<xs:attribute name="AutoStepinSafe" type="xs:boolean" default="false" />
<xs:attribute name="AutoStepinPastClose" type="xs:boolean" default="false" />
<xs:attribute name="LargePotential" type="xs:boolean" default="false" />
<xs:attribute name="MaxMatches" type="xs:boolean" default="false" />
<xs:attribute name="MoreOtherMatches" type="xs:boolean" default="false" />
<xs:attribute name="OverThreshold" type="xs:boolean" default="false" />
<xs:attribute name="Timeout" type="xs:boolean" default="false" />
</xs:complexType>
<xs:complexType name="PicklistEntryType">
- <xs:sequence>
<xs:element name="Moniker" type="xs:string" />
<xs:element name="PartialAddress" type="xs:string" />
<xs:element name="Picklist" type="xs:string" />
<xs:element name="Postcode" type="xs:string" />
<xs:element name="Score" type="xs:nonNegativeInteger" />
</xs:sequence>
<xs:attribute name="FullAddress" type="xs:boolean" default="false" />
<xs:attribute name="Multiples" type="xs:boolean" default="false" />
<xs:attribute name="CanStep" type="xs:boolean" default="false" />
<xs:attribute name="AliasMatch" type="xs:boolean" default="false" />
<xs:attribute name="PostcodeRecoded" type="xs:boolean" default="false" />
<xs:attribute name="CrossBorderMatch" type="xs:boolean" default="false" />
<xs:attribute name="DummyPOBox" type="xs:boolean" default="false" />
<xs:attribute name="Name" type="xs:boolean" default="false" />
<xs:attribute name="Information" type="xs:boolean" default="false" />
<xs:attribute name="WarnInformation" type="xs:boolean" default="false" />
<xs:attribute name="IncompleteAddr" type="xs:boolean" default="false" />
<xs:attribute name="UnresolvableRange" type="xs:boolean" default="false" />
<xs:attribute name="PhantomPrimaryPoint" type="xs:boolean" default="false" />
</xs:complexType>
here the attributes like FullAddress, PostcodeRecodedare , etc. are not being return by the web-service when it is getting the default value false. But, if it gets true then , it is being displayed at the BPEL console.
Do you have any idea how can I catch the attributes and its value even when it gets the default value which is already set. Previously, it was returning(it was not being displayed at the console).
Thanks once again for your valuable suggestions...!!!
Chandrachur.

Performance Problems with Web Layouts in web interface

Hello Gurus,
We have a a BPS web interface tool which has the following design:
1> A web interface with several tabs
2> Each tab has around 3-4 input layouts which are dependent on each other
3> In all there are 120-140 layouts that the tool uses...
My questions were in term of performance
1> Is there a limit to how many web layouts you can use per page/tab/view or if SAP recommends specific number of web layouts per page/tab/view ?
2> If there is a limitation...our intention was to convert all the display layouts into BW reports so as to increase the performance of the tool....
3> Would like to know the restriction on the number of users who can log into the tool as a specific point of time ? We may have 50-60 minimum using this tool.
I would appreciate your help in this regard.
Thanks in advance

Hello Rashmi,
Have you got a chance to look at the performance guide and SAP notes on BPS performance. If not here are the details
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/performance guide - sap sem bw bps.pdf
Enclosed are the few SAP notes related for improving performance.
358921 - Oracle database parameterization for SEM
459897 - SEM-CPM: Performance when reading transaction data
566713 Required information for the analysis of performance problems
560369 - Proposals BW aggregates for SEM-BPS
180605 - Oracle database parameter settings for BW
124361 - Oracle parameterization (R/3 >= 4.x, Oracle 8.x / 9.x)
358529 - Overview of performance notes
350011 - Technical performance: Using the business content
340246 - Techn. performance: Overview of statistics
417091 - Optimize execution time of planning functions
Some of them are Oracle specific, ignore them if you are not oracle database. Hope this helps.
Thanks,
Praveen
PS.Dont forget to reward points

Problem running report in web layout

Hi
I have a problem of running my report in web layout.
If i run the report in web layout it does not show the changes that i made to it , the colors and text sizes and styles, if I used no templates and changed the report manually it will just show the report as before it was modified.
But when I run it in paper layout every works fine.
Any ideas about what I'm doing wrong?
Thanks

Also I tested with the sample Report Test.rdf (Comes along with installation).
Even that runs well in Paper Layout and report hangs when run in Web Lay out.
Please help me with your valuable inputs on this regard.
Thanks and Regards,

Problem with the browse sequence back and browse sequence next widget placed in the screen layout

Hi,
Some basics: We are using Robohelp 10 to generate multiscreen html5 output. We used the pharmaceutical screen layout downloaded from: http://helpx.adobe.com/robohelp/robohelp-screen-profiles-layouts.html but modified it to match our GUI.
We are having a problem with the browse sequence back and browse sequence next buttons placed in the screen layout from the widgets tool bar. We are in no way experts at this part of Robohelp...and the css portion of all this is a bit of mystery but we have managed to get mostly what we need. Now we just need these buttons to work. In the past we used Airhelp and things worked great. Can anyone help us understand why the sequence buttons are not showing up in the output even though it does in the topic preview?
Also
This shows up in the layout.css file:
a.wBSBackButton {
                margin: 0 8pt 0 0;
                padding: 0;
                background-color: transparent;
img.wBSBackButton {
                border: none;
a.wBSNextButton {
                margin: 0 8pt 0 0;
                padding: 0;
                background-color: transparent;
img.wBSNextButton {
                border: none;
Also btw, I forgot to mention that we are linking our FrameMaker files.
Appreciate the help.
Thanks!

hi pradeep
It does not happen but if you Wait for a while that may be solved

Problem with "Run Web Layout" using own template

When I run a report (using Run Web Layout) which uses my own template (a modified version of rwblue.tdf), it outputs a plain page on the browser (as though it has no template).
When running the same report (using Run Paper Layout), the output is as it should be.
Can anyone help? Thank you in anticipation.

Hi John
Take a look at Reports product site on otn site. It has an example on how to create a web template for Reports Web View. In addtion to tdf file, for web layout, you need to have a .css file as well as a html code template.
Hope this will help.
Thanks
Rohit

Web Layout - Problems Running

I get a REP-0069 Internal Error and REP-50003 Bad parameter: settings/temp/docroot error when I try to run the report in Web Layout. Any ideas?
thanks

On 04 Nov 2006 in macromedia.fireworks, lifespantoo wrote:
> As a novice web designer, working alone, I am so
confused about so
> many things I don't know where to turn. I thought I had
finally
> discovered in FIreworks a sort of WYSIWYG layout tool
for web
> design.
That's because there is no such thing as a "WYSIWYG layout
tool for web
design". It ain't in the nature of the beast. At a bare
minimum, you
have too many kinds of user agent (generally browsers)
viewing your
page in too many different ways in too many different media.
> I find the help files in Fireworks pretty limited. Can
anyone
> direct me to better info on using FIreworks for web
design?
Here's the nickel tour:
Fireworks[1]: images/graphics
Dreamweaver[2]: HTML, CSS
[1] Or Photoshop, TheGimp, or your choice of image editing
app. FW
comes bundled with DW in many packages, and is a firstrate
choice for
web graphics.
[2] Or your favorite choice of text editor. I do a certain
amount of
editing of web files using WinVI (
http://winvi.de/) because, among
other things, it supports regex search/replace. For CSS, I
use
TopStyle Lite (
http://bradsoft.com/)
Slightly longer comment:
Learn HTML and CSS. Forget about DW or FW or any other 'web
development' application for a bit. Pick up a basic book on
HTML
authoring, and hand-code some pages. My personal favorite is
Elizabeth Castro, "HTML, XHTML, and CSS, Sixth Edition:
Visual
QuickStart Guide" from Peachpit Press. Available on Amazon
for around
US$20. It may seem a bit difficult at first, but you'll save
yourself
a lot of grief and anguish if you understand the underlying
technology.
Joe Makowiec
http://makowiec.net/
Email:
http://makowiec.net/email.php

Input Field: Value Range in IP Web Layout

Hi Experts,
I've created a Web Layout based on IP with a copy function (e.g. from actual 2008 to plan2009) over 12 calendar months. For choosing the months to be copied, I created a Variable (calmonths) and added an Input Field into my layout to enter the the months to be copied. I referred the variable to the input field and it's working...
When I want to select several months to be copied, I can type in " 1; 2; 3; " into the input field, execute the planning function and only month 1, 2, 3 (i.e. Jan, Feb, Mar) are being copied. But when I want to copy all 12 months, i have to enter 1; 2; 3; 4;...11; 12 which is kind of anoying! Has somebody some experience whether I can use a value range like 1-12 (or something like that) to avoid entering all the months individually? (I tried 1-12; 1- 12; 1 - 12; 1:12 etc but nothing like this is working)
It would be very helpful if someone has an idea
All the best,
Norbert

Hi Mayank, hi Srinivas.
Thanks a lot for your valuable input! Unfortunately I was not able until today to test your recommodations.
I tried your Interval variable but then faced the problem that I cannot enter multiple months anymore (e.g. 5 - 8 worked, 1; 3; 5 not). Then I inserted both variables, multiple values & interval, into the planning function as well as in the button group in WAD for executing the PF but was not able to execute the following example: 1; 8; 4 - 6. After trying out for some time I figured out that one has to type in the figures in the following order: 4 - 6; 1; 8. Only then I am able to execute the planning function for the months April-June & Jan & August. So, if you're facing the same problem in the future, maybe you have the solution
Best regards,
Norbert

Oracle Reports Not working in Web Layout

Hi,
I am facing problem to run oracle reports in web layout working fine in paper layout. Please tell me the steps how to fix this problem?
Regards,
Waqar Shafique

Hello,
The easiest way to develop is to use the Report Builder Wizzard.Other example can be found in this note:
How to Generate Excel output in browser using Reports9i JSP (Doc ID 240819.1)
You can also search on google.
For deployment check:
How To Deploy And Run Oracle Reports JSP In 10G R2 AS? (Doc ID 334447.1)
and if on 11g:
Deployment of Web Layout Reports (JSP) in Reports 11g (Doc ID 1297790.1)
Regards,
Alex
If someone answer helped please mark it accordingly.

Web layout of jsp report

Hi All:
Please let me know how can i run web layout of jsp report and publish it as portlet?
I have successfully deployed my jsp report(web layout),namely my_rpt.jsp, as a J2EE application and when i write URL direlctly in address bar of browser it runs successfully.
I have also published (as portlet) successfully my_rpt.jsp, with "execute" type "servlet", and it runs paper layout of report.
But i m unable to run the web layout of this report,with "execute" type "JSP"
i have provided "Oracle Reports Web Gateway URL for JSP reports " = http://webserver.domain_name:port/
Please help me out whats the problem and how can i run my jsp report with web layout?.One thing more its not the problem with only my_rpt.jsp
but other reports also shows the same behaviour.
Any suggestion/solution would be highly appreciated.
Regards
Sam

Hi Sam,
When you register a report with Portal, you can either register it to be run via servlet or as JSP. If you would like to run the same report via servlet as well as a JSP, you will have to register it twice with Portal.
If you want to run the report as JSP, keep these steps in mind:
1. While registering the report, select "Execute as JSP" in step 2 of the registration process.
2. When you write the "Oracle Reports File Name", provide the virtual path to the JSP. As an example, suppose you have written the following as "Oracle Reports Web Gateway URL for JSP reports "
http://webserver.domain_name:port/
And suppose when you run the JSP report successfully outside of Portal, you use the following URL:
http://webserver.domain_name:port/mycontext_root/my_rpt.jsp
In this case, you will have to provide the following as the value for "Oracle Reports File Name"
mycontext_root/my_rpt.jsp
Notice that the file name is actually not just the file name, but it is qualified by the virtual path to the JSP report (where you have deployed the report).
If you keep the above 2 steps in mind, you should be able to run the report as JSP from Portal.
Navneet.

Web Layout different in Reports Builder to running in URL

When I go to Run Web Layout for a report in the Oracle Reports Builder, the columns are formatted differently to when I run the report from a browser (ie. font is smaller and the columns seem to wrap when they seem to fit nicely when running Web Layout in the Reports Builder). In fact, it looks identical to what is shown in the 'paper layout' in the report editor.
I have used 'desformat=htmlcss', so why does it look different? Can I make the browser version look like what is shown when running Web Layout in the Reports Builder? If so, how?
Thanks
Alison

I am too facing the same problem for quite a long time and left it unresolved. So what i am doing for now is changing the font size and adjusting the paper layout manually.

Facing problem in placing portlets in Web Layout

Similar Messages

Maybe you are looking for