Facing problem in Printing network shop papers.

Hi
Iam facing a problem in printing Network shop papers
T-code CN22/CN23
after entering in to network in CN22/CN23 select menu path as below
path : Network - Print - Shop papers
we have many network in a project , there we are printing shop papers for all network as shown in path.
After taking print shop papers the system status PRT(print) is updated in one network and in all remaining network PPRT(part print) is updated , but we are unable to take print shoppapers of the network which is having PRT status.
But the question here is how the PRT staus is updated in only one network since we are taken print of other network also.
can we change this system status , or is there any other way to tek print of that particular network having status PRT.
expect your early help on this as this critical issue.
thanks in advance .

Hi,
In driver program.
call open_form.
loop at itab into fs.
call write_form.
endloop.
call close_form.
In script editor.
/E TEXT
&fs-field1&,,&fs-field2&
This works .

Similar Messages

Control for printing of shop papers (PM Order)

Hi! Can someone advise whether it is possible to control when a shop paper is to be printed? Based on testing, I can see that the print function is available when the PM order is released. However, I would like printing of specific shop paper if for example all the components are issued or receipted. Is there anyway I can control this?
Cheers!
SF

Hi,
If the requirement of this shop paper printing, is related to a Notification then we can modify the follwoing enhancement in transaction SMOD
Enhancement Description
QQMA0014 QM/PM/SM: Checks before saving a notification
Regards,
Sujatha

Printing Shop Papers for Completed Notifications

Hello,
This issue has been brought up on this forum before, but I have not managed to find an actual solution that was implemented by an organization.
We are basically trying to print Shop Papers for completed (NOCO) Notifications that have Orders assigned but that have been completed and TECOu2019d. The thread Need to REPRINT the Service Notification explains that it is not possible to print such shop papers. Is there some way to create a work around using user exits or a custom program to enable such shop papers to be printed? I've already checked with SAP and was told that no SAP note fulfills this requirement on ECC 6.0. I would much appreciate any insight on a solution you may have implemented.
Thanks in advance,
Tarun

PeteA is right you will need to have some custom code to by-pass the status checks that SAP has implemented.
Prometheus Group has a program called the Work Order Print Manager that can do this for work orders. I am a developer for this solution.
The program gathers all document related to the work order (services for objects, DMS, sapscripts/smartforms, equipment doc, functional location docs, material docs, etc) and puts them into a nice GUI for printing.
Specifically for work order you cannot print them from standard SAP if the order is in created status because the menu is greyed out). However we can put a button in a user exit to call the program. The sapscripts appear along with the other documents and can be printed.
Additionally we can add watermarks and/or to the document to let the users know they are trying to print a work order in the incorrect status. We/ I can demonstrate the work order solution to you and prototype a IW52 solution after a short discussion to help us understand your issue in particular.
http://prometheusgroup.us/wopm.php
if you are interested in a demo email them to set up a demonstration with me.
Edited by: Tim Huang on Mar 17, 2010 1:14 PM
Edited by: Tim Huang on Mar 17, 2010 1:20 PMv

Problem with printing graphics in SAP Script

Hi,
I am facing problem with printing of graphics in SAP Script. I uploaded a bitmap file from pc to se78. Then I inserted it in SAP script.
I am able to view it in the printpreview as well as in the spool number. But it is not getting printed.
Plese tell me the solution.
Thanks,
Srinivas

You need to check your printer settings.Might be drivers are missing.

Problem of printing

I am facing problems while printing a document through the transaction MIGO.
It is printed in the wrong printer. I checked personal settings in SU3 and even the right printer is mentioned there.
Could you help me is there any other place where printer settings are maintained for a user?

Hi,
May be wrong printer assign to MIGO output type( WE01 /WE02 /WE03 )!
If setting done for MIGO document printout ,then check Printer setting in t.code: OMBR & assignment of the right printer to output type( WE01 /WE02 /WE03 ) in t.code: OMJ3 with combination of Plant with Storage location.
Regards,
Biju K

Printing Shop Papers from Maintenance Order Urgent !!!

Hi All,
I am in need of Printing Shop papers from Maintenance order , i know that the configuration of this thing is done through SPRO
Plant Maintenance and customer service ->
Maintenance and Service Processing -> Maintenance and Service Orders -> Print Control -> Define Shop Papers, Forms and Output Programs
, but i want that when we give Print command through Maintenance order a smartfrom should trigger which i have developmed.
My problem is that i am not able to configure the Print control for SMARTFORMS.
What to do , Please suggest.
Regards,
Rachit Khanna

Amol,
Standard config doesnt provide the functionality to set the default selection dependant on PLANT. You will have to get the help of developer to do an implicit enhancement (Only If you are in ECC 6.0) to accomplish the same.
Reagrds
Narasimhan

Creating single spool request for printing all shop floor papers

Hello PP Gurus,
We are printing shop floor papers at the time of releasing production order using txn CO02. It creates individual spool request for printing different shop floor papers in the same orders . eg Pick list, goods receipt list etc.
Is it possible to do the cofiguration setting to create only one spool request for all the different SF papers belong to same order.? If yes, please let me know the steps for customising this.
Thanks for your help in advance.
Regards & Thanks
Rajesh D.

In transaction OPK8, in forms uncheck the 'New List' check box for the List.
Regards
Ramanujan

Changing print format for the Shop papers -External service operations

Hi Friends ,
We want print outs for the external service operations in our PM orders .
The standard format available with shop papers is displayed with some extra info .
We want to remove those info and add some extra info .
Can we change the printing format for these and how much effort it rquires .
Regards
AM

Hi,
In OIDF, define the Shop Paper specially designed for External Service Operations.
In Order, in Print option, go to Operation Selection, select the required operation & select the print layout which is designed for External Service, so that, you can get the print out according to additional fields requirements.
regards,
Maheswaran.

Im facing problem while trying to update my iphone 4 from version 4.3.1 to iOS 5. While processing the downloaded 774mb file, it comes with the statement that the network connection timed out. why???

im facing problem while trying to update my iphone 4 from version 4.3.1 to iOS 5. While processing the downloaded 774mb file, it comes with the statement that the network connection timed out. why???

i have been dealing with this same issue, tried to turn off firewall and even turn of antivirud but still it gave me the same error.

Facing problems with network due which the phone goes into hangs status

Facing problems with network due which the phone goes into hangs status. some one help me with switching between 2g and 3G network

Hi Mani Nair,
I apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are talking about having issues with a 3G cellular data network, you may find the troubleshooting steps outlined in the following article helpful:
iPhone cellular data connection issues
Regards,
- Brenden

When i try to order prints i get an error message saying there is a problem with my network and my network is working

when i try to order prints i get an error message saying there is a problem with my network and my network is working. How can i solve this problem?

Try a different media. I have good luck using Maxell discs.

Problem on installing network printer Officejet Pro x451dw

Problem on installing network printer Officejet Pro x451dw
Hello everyone. I'm trying to install the above printer on my PC belonging to a network of about 7 pc. I should say that on the PC in question is running Windows XP Professional SP3 and that the printer has already been installed on other computers in the network and is functioning. I tried using both the driver CD that can be found on the HP website and they both do not give errors during instalation, indeed, perfectly detect the printer and its IP address, so the installation finishes successfully, but the press the test page, the waiting time extends until the error message "unable to print the document." I also made an attempt with the software "hp scan doctor" and also this does not detect errors up to the test of the final print, that does not go through. At this point the software calls to make a print "internal" that this time occurs. The suggestion is to uninstall and then reinstall the HP software, but this intervention does not have a positive outcome. How else could I do attempt ??? I ask for help! Thank you for your attention. regards Roberto
Problema su installazione di rete stampante Officejet Pro x451dw
Salve a tutti. Sto cercando di installare la suddetta stampante sul mio PC appartenente ad una rete di circa 7 pc. Devo premettere che sul pc in questione è installato Windows Xp Professional SP3 e che la stampante è stata già installata sugli altri computer della rete ed è funzionante. Ho provato ad utilizzare sia il driver del CD che quello reperibile sul sito HP ed entrambi non danno errori in fase di instalazione, anzi, rilevano perfettamente la stampante ed il suo indirizzo IP, così l'installazione si conclude con esito positivo, ma alla stampa della pagina di prova il tempo di attesa si protrae fino al messaggio di errore " impossibile stampare documento ". Ho anche fatto un tentativo con il software "hp scan doctor" ed anche quest'ultimo non rileva errori fino alla prova di stampa finale, che non va a buon fine. A questo punto il software invita a effettuare una stampa " interna" che questa volta avviene. Il suggerimento è quello di disinstallare il software hp per poi reinstallare, ma anche questo intervento non ha esiti positivi. quale altro tentativo potrei fare ??? Chiedo aiuto ! Grazie per l'attenzione. Saluti Roberto

Hi
Install the full software on your computer and follow the following instructions:
Step 1: Print out a network report by pressing the "Setup" icon on the display,Choose Printer reports and select network configuration report and make a note of the IPV4 address from the document.
Step 2: On your computer,Go to control panel,Choose printers and faxes.Right click on the X451 printer and choose Properties.
>>Then select Ports>Add Ports>Standard TCP/IP Port,Click on new port whicjh would open up an installation wizard.
>>Click on Next and type in the IPV4 address an the box,Click on next>Finish
Donot forget to click on apply and try printing a Test page.
I hope this helps.

Updated my iPhone 4 factory unlocked to iOS 4.3.5 and I am facing problem of network, it shows No Service and can't identify the service provider also.

Updated my iPhone 4 factory unlocked to iOS 4.3.5 and I am facing problem of network, it shows No Service and can't identify the service provider even, many times it has network but constant lost and call drops. Now what should I do????

I am also getting the same issue!! Either no service or network lost....
And my battery runs out earlier as well.

PRINTER PROBLEM ON THE NETWORK

I HAVE PRINTER HP2050dn installed on the network ,now its giving me problem from all network systems ,don't print ,i also connected directly to the system and install the software but still giving problem.

Try installing the printer via System preferences using this driver:
http://software.canon-europe.com/software/0025024.asp?model=

What is meant by Print Shop Papers

Hi ,
What is meant by Print Shop Papers?. What is its use?.
Thanks in advance

Dear ,
Print Shop Papers : It is one of gthe custom developement based on your Standard Production Orders .In any manufacturing plant , when Production Engineer and his team have certian product developement , they need a comprehensive production information like Bill Of Material , Operation sequence , Operation Hrs , Prodiuctuion order reservation number , MTO means MTO sales Order number , customer information if required , Operation Star and Ened datses , times , Production Schedule Start /Ened etc .A shop paper contains those above information and SAP system has Print Programme to rtigger those shop papaers through Stanrda Txn like CO02/CO04N or any Z tsxn by your ABAPer.
Specially , it will be with Production Supervisor at Shop floor where production is happening and will be followed those instruction interms of material to operation till the completion of the order.
Carry out a SND search in SDN PP forum , you will find number of wiki , theards having technical information related to Print Shop Papaers .
All the best
Regards
JH

Facing problem in Printing network shop papers.

Similar Messages

Maybe you are looking for