Facing problem while connecting N70 with bluetooth

I am connecting N70 with my laptop thru bluetooth. But im facing a error msg saying that hardware problem with MODEM.
do i need to install Modem & if so which one suitable.
all others application working thru bluetooth expect net connection.
description:
Window XP
Nokia PC suite letest one
thru blutooth.
plz suggest. Thanks

When one installed pcsuites successfully it installed all drivers including the modem, the reasons why it takes sometimes when one is prompted to connect the cable.
Try to uninstall pcsuite again & run the pcsuites cleaner afterwards then re-install pcsuite. Don't connect the cable until told to so & check. If it does fail again, make a backup & format your phone; is the firmware of your N70 the latest one?
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Similar Messages

I was facing problem while connecting to oracle database.Can some one help me soon!!!!!

Hi all,
I was facing problem from last week.Suddenly i was getting ora-12505 error while connecting to the database through toad.I tried to change tnsnames.ora & listener.ora in multiple ways,but no luck...Inspite i was getting different errors like ora - 01034: ORACLE not available / ora - 27101: shared memory realm does not exist...When i try to connect using sys / sys as sysdba,connection is establishing and when issue the command startup it was throwing the error ORA-01821: date format not recognized......Fed up solving these issues....Can some one help me out...It's very very urgent..
Thanks in advance,
pavankumar.

Well, the obviously solution is to use separate Apple ID's for iCloud.

STRAND PROBLEM while connecting D2K with DB

Dear All,
For some reason I am unable to connect SQLPlus, Forms and Reports to my oracle 10g database. Everthing is in one machine which is dell with good configuration.
O/S: Windows XP DB: Oracle 10g Enterprise Edition D2K: Rel: 6.0
All have installed successfully. With in Net8 Easy Config & Net8 Assistant the service tests successfully but when I use the same string within Forms / Reports / Sqlplus it gives typical windows (microsoft) error with the following caption:
Oracle SQL*PLUS has encountered a problem and needs to close.
When I checked evenlog it has the error with following text:
"Faulting application plus80w.exe, version 0.0.0.0, faulting module unknown, version 0.0.0.0, fault address 0x000000d7"
Important Note: the same runtime of D2K is successfully connecting one other database (oracle 8i on sun soloaris) which resides in different machine and executing the application with no problems. On the other hand local 10g db is also connectable via its own sqlplus
Kindly assist me on this problem... Can versions of DB and D2K make difference!!!
Looking forward for your expert advices on the issue...Thanks
Regards,
Zia

Mr. Sybrand,
Thanks for the reply and I understood your point. Can you please further guide me to get an appropriate Oracle Forms/Reports (Developer) version in order to make application using Oracle Database 10g. Please note that most of my experience is in D2K 2000 rel:6. and unfortunately I came into software development after a long gap that is why not much aware about latest version out there of Oracle Forms/Reports.
But is there really no way to connect D2K rel:6 with DB 10g !!!
Regards,
Zia

Facing Problem While connecting Remote

Dear Sir ,
when i connected my server 2012 standard via remote login error come that is
remote session was disconnected because there are no remote desktop licence servers available to provide a licence. Please contact the server administrator
after that i have purchase microsoft windows serverCAL 2012 & Microsoft WinretDsktpSvcsCAL 2012 5 Quantity and Install Licence , licence are sucessfully activate also but, still iam not able to connect server via remotelogin same erroe are show that
is
remote session was disconnected because there are no remote desktop licence servers available to provide a licence. Please contact the server administrator
i m also attach error message
pls resolve my problem i have fasing this problem from lasat 4 days after purchasing licence also.
contact no. Vivek Desai =9850513915

Hi,
Have you purchase Per User CAL or Per Device CAL?
When you apply the license for installation we need to clarify whether licensing mode is well set as per purchased License and try to change the RD Licensing mode from per device to per User. Also see whether you have number of CAL remained for issuing. Is
the RD server locate the license server, means have you specified the RDSH server to use license server. For more information you can refer following article.
RD Licensing Configuration on Windows Server 2012
http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx
Troubleshooting Remote Desktop Licensing Error Messages
https://technet.microsoft.com/en-in/library/cc756826(v=ws.10).aspx#BKMK_12
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Problem while uploading data with GUI UPLOAD Function

Hi,
I am facing problem while uploading data with FM GUI UPLOAD in out text file there are 7 row but after the FM GUI UPLOAD there are 14 entries are coming in Internal table and each alternate row is coming as blank with 0000 in some column in internal table first row is proper and second line is blank so on.
what can be the problem .
The program in which we are using this we are using it from last 2 year but we are facing problem today only.
regards,
zafar

Hi,
The file formate is same as it is from last two years it is automatically generated by one another bar code server and there is no change in the file formate.
So waht can be the problem to check any inconsistancy in system i have develop a samll program fro uploading a text file with same function module , but it is working fine.
regards,
zafar

Problem while creating xml with cdata section

Hi,
I am facing problem while creating xml with cdata section in it. I am using Oracle 10.1.0.4.0 I am writing a stored procedure which accepts a set of input parameters and creates a xml document from them. The code snippet is as follows:
select xmlelement("DOCUMENTS",
xmlagg
(xmlelement
("DOCUMENT",
xmlforest
(m.document_name_txt as "DOCUMENT_NAME_TXT",
m.document_type_cd as "DOCUMENT_TYPE_CD",
'<![cdata[' || m.document_clob_data || ']]>' as "DOCUMENT_CLOB_DATA"
) from table(cast(msg_clob_data_arr as DOCUMENT_CLOB_TBL))m;
msg_clob_data_arr is an input parameter to procedure and DOCUMENT_CLOB_TBL is a pl/sql table of an object containing 3 attributes: first 2 being varchar2 and the 3rd one as CLOB. The xml document this query is generating is as follows:
<DOCUMENTS>
<DOCUMENT>
<DOCUMENT_NAME_TXT>TestName</DOCUMENT_NAME_TXT>
<DOCUMENT_TYPE_CD>BLOB</DOCUMENT_TYPE_CD>
<DOCUMENT_CLOB_DATA>
<![cdata[123456789012345678901234567890123456789012]]>
</DOCUMENT_CLOB_DATA>
</DOCUMENT>
</DOCUMENTS>
The problem is instead of <![cdata[....]]> xmlforest query is encoding everything to give < for cdata tag. How can I overcome this? Please help.

SQL> create or replace function XMLCDATA_10103 (elementName varchar2,
2                                             cdataValue varchar2)
3 return xmltype deterministic
4 as
5 begin
6     return xmltype('<' || elementName || '><![CDATA[' || cdataValue || ']]>
7 end;
8 /
Function created.
SQL> select xmlelement
2         (
3            "Row",
4            xmlcdata_10103('Junk','&<>!%$#&%*&$'),
5            xmlcdata_10103('Name',ENAME),
6            xmlelement("EMPID", EMPNO)
7         ).extract('/*')
8* from emp
SQL> /
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[SMITH]]></Name>
<EMPID>7369</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[ALLEN]]></Name>
<EMPID>7499</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[WARD]]></Name>
<EMPID>7521</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[JONES]]></Name>
<EMPID>7566</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[MARTIN]]></Name>
<EMPID>7654</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[BLAKE]]></Name>
<EMPID>7698</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[CLARK]]></Name>
<EMPID>7782</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[SCOTT]]></Name>
<EMPID>7788</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[KING]]></Name>
<EMPID>7839</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[TURNER]]></Name>
<EMPID>7844</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[ADAMS]]></Name>
<EMPID>7876</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[JAMES]]></Name>
<EMPID>7900</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[FORD]]></Name>
<EMPID>7902</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[MILLER]]></Name>
<EMPID>7934</EMPID>
</Row>
14 rows selected.
SQL>

I am facing problem while installing iTunes

I am facing problem while installing iTunes with this error
"There is problem with you installer package. A program required for this install to complete could not be run."

Hi Owen,
I have tried .net Package & Deployment as well as InstallShield 2008. finally i have tried B1DE also. B1DE gives us template only in vb.net but not in C#.net and i want this in c#.net.
I was trying to understand the code that it creates. I won't be able get the code also.
I would like to go from other way apart from B1DE.
Need Urgent Help...

Im facing problem while trying to update my iphone 4 from version 4.3.1 to iOS 5. While processing the downloaded 774mb file, it comes with the statement that the network connection timed out. why???

im facing problem while trying to update my iphone 4 from version 4.3.1 to iOS 5. While processing the downloaded 774mb file, it comes with the statement that the network connection timed out. why???

i have been dealing with this same issue, tried to turn off firewall and even turn of antivirud but still it gave me the same error.

When my iPhone 4S (with ios7) experiences a failed call while connected to my Bluetooth hands free in my car(screen locked) the failed call appears on the locked screen, as it should, then when I unlock the phone it automatically redials the failed call,

When my iPhone 4S (with ios7) experiences a failed call while connected to my Bluetooth hands free in my car(screen locked) the failed call appears on the locked screen, as it should, the problem arises whenever I unlock the phone, it automatically redials the last failed call, it doesn't do this with missed calls that are on the locked screen, if any. It is really annoying as sometimes the phone doesn't respond to attempts to end the call before it connects to the number. I then have to explain that it was my phone and not me, I look like an idiot, which I don't really need any extra help with!! Does anyone have any ideas? I don't want to stop missed call from showing in the locked screen but it might be associated with the failed calls and therefore be the only resolution

I have had the same issue which was driving me mad but think I have just found a way around it. In iOS 7 if you swipe up on the lock screen to access quick settings and go into timer then click the home button you get into the phone without calling the person back. Not a great 'fix' but hope it works for you. Come on Apple this isn't good enough, fix this bug otherwise you will lose your customers.

Facing problem in connection with OWB client

Dear All
Greetings!!!
Im new to Datawarehouse building. I have installed OWB R1 at my own pc.I am facing problems in connecting OWB client..What exactly to put in Host name and Oracle Service name. i am logging in with the same system/password with normal login. Please guide me to enter in the datawarehouse world..
Thanx and Regards
Nukesh Bhoyar
Mumbai(India)

Hi Nukesh
I know this doesn't really answer your question but Oracle have just made Release 2 of Warehouse Builder available and based on all of the info through this forum and other places, if I was you I would download R2 and install it instead of R1, as it is deemed to have way more functionality.
Cheers
M

I am facing problem while i create a xls sheet with some Header.

I am facing problem while i create a xls sheet with some Header.
If i give the hed names as FirstName , LastName its comming fine.
FirstName | LastName
--------------------------|------------------------
But when i specify a string like New"Deal , New"approach .
= "New"Deal " | =" New"approach" .
--------------------------|------------------------
Problem is:
It's adding = sign in front of the header name.
I dont want that = to be in front of the headername.
//rep.addColumn((String) itr.next());
The above code is used to add the header name to the xls sheet.
The argument will come as New"Deal
But after seeing xls it has become ="New"Deal "
Edited by: SUNJava2008NY on Jun 12, 2008 11:38 PM

What is the tree structure created for the property of the componentB?
Can you try the below code in your componentB jsp and check whether you are getting the property value
Resource resource = slingRequest.getResource();
String description = ((String) ResourceUtil.getValueMap(resource).get(
"./description", String.class));

Hi Experts , I am currently facing problems while running restricted version copy .. The log says 0 location products copied and that the process has has timed out. the error message is /SAPAPO/MVM_INT_SVC_CO_VER_LCW reported exception in task DP00014, th

Hi Experts , I am currently facing problems while running restricted version copy in sap apo .. The log says 0 location products copied and that the process has timed out. the error message is " /SAPAPO/MVM_INT_SVC_CO_VER_LCW reported exception in task DP00014 " , then ending in time limit exceeded. could anyone explain why this happens. please note even if the log says 0 location products copied , in reality they have have been partially copied.
Regards
Jerel

Hi, thank you for your replies, I found out few things about my servlet, and its portability
and i have few questions, although i marked this topic as answered i guess its ok to post
I am using javax.servlet.context.tempdir to store my files in that servletcontext temporary directory. But i dont know how to give hyperlink
of the modified files to the user for them to download the modified files.
What i am using to get the tempdir i will paste
File baseurl = (File)this.getServletContext().getAttribute("javax.servlet.context.tempdir");
System.out.println(baseurl);
baseurl = new File(baseurl.getAbsolutePath()+File.separator+"temp"+File.separator+"files");
baseurl.mkdirs();so i am storing my files in that temp/files folder and the servlet processes them and modifies them, then how to present them as
links to the user for download ?
and as the servlet is multithreaded by nature, if my servlet gets 2 different requests with same file names, i guess one of them will be overwritten
And i want to create unique directory for each request made to the servlet , so file names dont clash.
one another thing is that i want my servlet to be executed by my <form action> only, I dont want the user to simply type url and trigger the servlet
Reply A.S.A.P. please..
Thanks and regards,
Mihir Pandya

Problem while Creating MVLOG with synonym in Oracle 9i:Is it an Oracle Bug?

Hi All,
I am facing a problem while Creating MVLOG with synonym in Oracle 9i but for 10G it is working fine. Is it an Oracle Bug? or i am missing something.
SQL> select * from v$version;
BANNER
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE    10.2.0.1.0      Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
SQL>
SQL> create table t ( name varchar2(20), id varchar2(1) primary key);
Table created.
SQL> create materialized view log on t;
Materialized view log created.
SQL> create public synonym syn_t for t;
Synonym created.
SQL> CREATE MATERIALIZED VIEW MV_t
2 REFRESH ON DEMAND
3 WITH PRIMARY KEY
4 AS
5 SELECT name,id
6 FROM syn_t;
Materialized view created.
SQL> CREATE MATERIALIZED VIEW LOG ON MV_t
2 WITH PRIMARY KEY
3   (name)
4    INCLUDING NEW VALUES;
Materialized view log created.
SQL> select * from v$version;
BANNER
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
PL/SQL Release 9.2.0.6.0 - Production
CORE    9.2.0.6.0       Production
TNS for Solaris: Version 9.2.0.6.0 - Production
NLSRTL Version 9.2.0.6.0 - Production
SQL>
SQL> create table t ( name varchar2(20), id varchar2(1) primary key);
Table created.
SQL> create materialized view log on t;
Materialized view log created.
SQL> create public synonym syn_t for t;
Synonym created.
SQL> CREATE MATERIALIZED VIEW MV_t
REFRESH ON DEMAND
WITH PRIMARY KEY
AS
2    3    4    5 SELECT name,id
FROM syn_t;   6
Materialized view created.
SQL> CREATE MATERIALIZED VIEW LOG ON MV_t
WITH PRIMARY KEY
(name)
INCLUDING NEW VALUES; 2    3    4
CREATE MATERIALIZED VIEW LOG ON MV_t
ERROR at line 1:
ORA-12014: table 'MV_T' does not contain a primary key constraintRegards
Message was edited by:
Avinash Tripathi
null

Hi Nicloei,
Thanks for the reply. Actually i don't want any work around (Creating MVLOG on table rather than synonym is fine with me) . I just wanted to know it is actually an oracle bug or something else.
Regards
Avinash

Connection problem while connecting to LDAP resource via SSL

Hi,
I am facing problem in connecting LDAP via SSL. I got the self signed certificate from the LDAP team and while importing it to the JVM keystore using command "keytool -import -file PathTo/ds-cert.txt -keystore ./cacerts -storepass changeit -trustcacerts", I am getting error "keytool error: java.security.SignatureException: Signature does not match". Since I am not able to import the cert, I am facing problem in connetcing to LDAP via SSL. I have gone thru other posts and found some answers for it.. but not able to do it correctly. I am using SIM 7.1 and tomcat. In some posts, I have seen, in the resource config wizard, use "true" instead of 1 in the SSL field.. For SIM 7.1, does the value 1 work?. Please help me in importing the cert to my local JVM keystore.
Thanks.
Edited by: dj123 on Oct 15, 2008 1:50 PM

Make sure you are importing the certificate of the issuer (CA) that issued the LDAP certificate, not the LDAP cert itself.

Facing problems while mapping fields in LSMW.

Hi Friends,
       i got a requirement to upload the address. Address is in
flat file.requirement is to use LSMW with object 0602 and the
standard report program is RSADRLSM02.This standard report
program uses the structures for uploading are ADR_LSM0 to
ADR_LSM6.But i have some fields in the source structure are
not at all related to the fields in destination structure(i.e ADR_LSM0 to ADR_LSM6)therefore i am facing problem while
mapping the source and destination fields.is there any other
way to map the fields.Please help me it's very urgent.
Thanks in advance.
Regards,
Sumiti Gupta.

Thanks for the reply santosh.
GIS FIELD                                      SAP LOCATION
ADDR_GID(10char)                     EXADR-KUNNR
STR_NO(10)                               ADR_LSM0-STRT_CODE
STR_NAME (42)                         ADR_LSM0-STREET
ADDRESS_UNIT(7)                     ADR_LSM0-HOUSENUM_H
                                                      and
                                                 ADR_LSM0-HOUSENUM_L
ADDRESS_UNIT_TYPE(5)           EVBSD-VBSART
POST_CODE (10)                       ADR_LSM0-POST_CODE
MUNI_NAME (40)                        EXADR-APPLDATA
MAILING_CITY(60)                      ADR_LSM0-CITY_NAME
MAP_PAGE(4)                           EADRSTRTGRID_GRID_ID
EVAC_ZONE(1)                          EVBSD-ZEVAC
PIN_NUM (18)                            EHAUD-PLTXT
in the above fields the structure with ADR_LSM0 are found with the other fields i m not able to find the similar fields in the destination structure.Please help me.
Regards,
Sumiti Gupta.

Facing problem while connecting N70 with bluetooth

Similar Messages

Maybe you are looking for