Facing Problem While connecting Remote

Dear Sir ,
when i connected my server 2012 standard via remote login error come that is
remote session was disconnected because there are no remote desktop licence servers available to provide a licence. Please contact the server administrator
after that i have purchase microsoft windows serverCAL 2012 & Microsoft WinretDsktpSvcsCAL 2012 5 Quantity and Install Licence , licence are sucessfully activate also but, still iam not able to connect server via remotelogin same erroe are show that
is
remote session was disconnected because there are no remote desktop licence servers available to provide a licence. Please contact the server administrator
i m also attach error message
pls resolve my problem i have fasing this problem from lasat 4 days after purchasing licence also.
contact no. Vivek Desai =9850513915

Hi,
Have you purchase Per User CAL or Per Device CAL?
When you apply the license for installation we need to clarify whether licensing mode is well set as per purchased License and try to change the RD Licensing mode from per device to per User. Also see whether you have number of CAL remained for issuing. Is
the RD server locate the license server, means have you specified the RDSH server to use license server. For more information you can refer following article.
RD Licensing Configuration on Windows Server 2012
http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx
Troubleshooting Remote Desktop Licensing Error Messages
https://technet.microsoft.com/en-in/library/cc756826(v=ws.10).aspx#BKMK_12
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

I was facing problem while connecting to oracle database.Can some one help me soon!!!!!

Hi all,
I was facing problem from last week.Suddenly i was getting ora-12505 error while connecting to the database through toad.I tried to change tnsnames.ora & listener.ora in multiple ways,but no luck...Inspite i was getting different errors like ora - 01034: ORACLE not available / ora - 27101: shared memory realm does not exist...When i try to connect using sys / sys as sysdba,connection is establishing and when issue the command startup it was throwing the error ORA-01821: date format not recognized......Fed up solving these issues....Can some one help me out...It's very very urgent..
Thanks in advance,
pavankumar.

Well, the obviously solution is to use separate Apple ID's for iCloud.

Facing problem while connecting N70 with bluetooth

I am connecting N70 with my laptop thru bluetooth. But im facing a error msg saying that hardware problem with MODEM.
do i need to install Modem & if so which one suitable.
all others application working thru bluetooth expect net connection.
description:
Window XP
Nokia PC suite letest one
thru blutooth.
plz suggest. Thanks

When one installed pcsuites successfully it installed all drivers including the modem, the reasons why it takes sometimes when one is prompted to connect the cable.
Try to uninstall pcsuite again & run the pcsuites cleaner afterwards then re-install pcsuite. Don't connect the cable until told to so & check. If it does fail again, make a backup & format your phone; is the firmware of your N70 the latest one?
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Im facing problem while trying to update my iphone 4 from version 4.3.1 to iOS 5. While processing the downloaded 774mb file, it comes with the statement that the network connection timed out. why???

im facing problem while trying to update my iphone 4 from version 4.3.1 to iOS 5. While processing the downloaded 774mb file, it comes with the statement that the network connection timed out. why???

i have been dealing with this same issue, tried to turn off firewall and even turn of antivirud but still it gave me the same error.

Connection problem while connecting to LDAP resource via SSL

Hi,
I am facing problem in connecting LDAP via SSL. I got the self signed certificate from the LDAP team and while importing it to the JVM keystore using command "keytool -import -file PathTo/ds-cert.txt -keystore ./cacerts -storepass changeit -trustcacerts", I am getting error "keytool error: java.security.SignatureException: Signature does not match". Since I am not able to import the cert, I am facing problem in connetcing to LDAP via SSL. I have gone thru other posts and found some answers for it.. but not able to do it correctly. I am using SIM 7.1 and tomcat. In some posts, I have seen, in the resource config wizard, use "true" instead of 1 in the SSL field.. For SIM 7.1, does the value 1 work?. Please help me in importing the cert to my local JVM keystore.
Thanks.
Edited by: dj123 on Oct 15, 2008 1:50 PM

Make sure you are importing the certificate of the issuer (CA) that issued the LDAP certificate, not the LDAP cert itself.

Problem in connecting remote server using Applet?

Hello everybody,
I am facing problem in connecting to remote server using Applet in browser. I am using JDK 1.5.0_12 and running the application on apache 2.2.
Firstly I have tried with simple jar file which could not connect to remote server and throws permission denied than now I am trying with signed jar file but also not working. I have changed the java.policy file of JDK in server with grant all Permission but also it throws "java.security.AccessControlException:access denied(java.net.SocketPermission 127.0.0.1:1521 connect, resolve)".
Can anybody suggest me how to solve this problem?
Thank You.
-Ritesh

>
I am facing problem in connecting to remote server using Applet in browser.
Firstly I have tried with simple jar file which could not connect to remote server and throws permission denied than now I am trying with signed jar file but also not working. >Were you prompted to accept the digitally signed code? To see what I mean, check out the [Defensive loading of trusted applets demo|http://pscode.org/test/docload/]. If you are not getting the prompt, or refused it, follow the link to sandbox.html for tips on how to proceed.

Having problem while connecting to SQL Server through a application

hi guys ,
having one problem while connecting to the SQL SERVER 2008 R2 through a application (Dynamics NAV), by using the concept of Linked Server.
But one more thing , i am able to access that very SQL server through my app , when i am working locally , i mean to say that when i am working on the machine itself on which the server is installed then its working fine .
But when i am working on another system the query doesn't work.

by using the concept of Linked Server.
Why through a linked server and not directly as a simple remote connection? I don't think you app is aware of linked server.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Facing problem while going to catch return result from web-services.

Hi everybody,
I am new to BPEL. I am facing problem while going to catch the attributes of resultsets returning from web-services(QAS). As far as my knowledge, two types of results it should return - XML entities and another is attributes which is coming as the part of XML entitites. I am able to catch the XML entities, but can't catch the attributes under it. Even, I am not able to see whether web-services returning something within that field.
When, I tried to catch the attribute and store to a temporary varilable using the following code:
*<assign name="AssignQASDoGetAddress1">*
*<copy>*
*<from variable="InvokeQAS_DoSearch_OutputVariable"*
part="body"
query="/ns6:QASearchResult/ns6:QAPicklist/ns6:PicklistEntry/@PostcodeRecoded"/>
*<to variable="temp"/>*
*</copy>*
*</assign>*
but, I am facing the following selectionFailure errors after running it:
*"{http://schemasxmlsoap.org/ws/2003/03/business-process/}selectionFailure" has been thrown.*
-<selectionFailure xmlns="http://schemasxmlsoap.org/ws/2003/03/business-process/">
-<part name="summary">
*<summary>*
empty variable/expression result.
xpath variable/expression expression "bpws:getVariableData('InvokeQAS_DoSearch_OutputVariable', 'body', '/ns6:QASearchResult/ns6:QAPicklist/ns6:PicklistEntry/@PostcodeRecoded')" is empty at line 269, when attempting reading/copying it.
Please make sure the variable/expression result "bpws:getVariableData('InvokeQAS_DoSearch_OutputVariable', 'body', '/ns6:QASearchResult/ns6:QAPicklist/ns6:PicklistEntry/@PostcodeRecoded')"is not empty.
*</summary>*
*</part>*
*</selectionFailure>*
Getting this error it seems to me that web-service is returning nothing, but, it returns something as it has been catched using a method called isPostcodeRecoded() Java Code in Oracle ADF. This method has been used as it should return boolean whereas for catching the xml entities using java code we used the method like getPostcode(), getMoniker().
For your information, we are using Jdeveloper as the development tool for building the BPEL process.
Am I doing any syntax error. Please consider it as urgent and provide me asolution.
Thanks in advance.
Chandrachur.

Thanks Dave and Marc, for your suggestions. Actually what I found is QAS web-service is returning nothing as attributes when the attributes are set to the default value. For example, following is the part of the wsdl of the result which QAS webservice returns.
<xs:element name="QASearchResult">
- <xs:complexType>
- <xs:sequence>
<xs:element name="QAPicklist" type="qas:QAPicklistType" minOccurs="0" />
<xs:element name="QAAddress" type="qas:QAAddressType" minOccurs="0" />
</xs:sequence>
<xs:attribute name="VerifyLevel" type="qas:VerifyLevelType" default="None" />
</xs:complexType>
</xs:element>
<xs:complexType name="QAPicklistType">
- <xs:sequence>
<xs:element name="FullPicklistMoniker" type="xs:string" />
<xs:element name="PicklistEntry" type="qas:PicklistEntryType" minOccurs="0" maxOccurs="unbounded" />
<xs:element name="Prompt" type="xs:string" />
<xs:element name="Total" type="xs:nonNegativeInteger" />
</xs:sequence>
<xs:attribute name="AutoFormatSafe" type="xs:boolean" default="false" />
<xs:attribute name="AutoFormatPastClose" type="xs:boolean" default="false" />
<xs:attribute name="AutoStepinSafe" type="xs:boolean" default="false" />
<xs:attribute name="AutoStepinPastClose" type="xs:boolean" default="false" />
<xs:attribute name="LargePotential" type="xs:boolean" default="false" />
<xs:attribute name="MaxMatches" type="xs:boolean" default="false" />
<xs:attribute name="MoreOtherMatches" type="xs:boolean" default="false" />
<xs:attribute name="OverThreshold" type="xs:boolean" default="false" />
<xs:attribute name="Timeout" type="xs:boolean" default="false" />
</xs:complexType>
<xs:complexType name="PicklistEntryType">
- <xs:sequence>
<xs:element name="Moniker" type="xs:string" />
<xs:element name="PartialAddress" type="xs:string" />
<xs:element name="Picklist" type="xs:string" />
<xs:element name="Postcode" type="xs:string" />
<xs:element name="Score" type="xs:nonNegativeInteger" />
</xs:sequence>
<xs:attribute name="FullAddress" type="xs:boolean" default="false" />
<xs:attribute name="Multiples" type="xs:boolean" default="false" />
<xs:attribute name="CanStep" type="xs:boolean" default="false" />
<xs:attribute name="AliasMatch" type="xs:boolean" default="false" />
<xs:attribute name="PostcodeRecoded" type="xs:boolean" default="false" />
<xs:attribute name="CrossBorderMatch" type="xs:boolean" default="false" />
<xs:attribute name="DummyPOBox" type="xs:boolean" default="false" />
<xs:attribute name="Name" type="xs:boolean" default="false" />
<xs:attribute name="Information" type="xs:boolean" default="false" />
<xs:attribute name="WarnInformation" type="xs:boolean" default="false" />
<xs:attribute name="IncompleteAddr" type="xs:boolean" default="false" />
<xs:attribute name="UnresolvableRange" type="xs:boolean" default="false" />
<xs:attribute name="PhantomPrimaryPoint" type="xs:boolean" default="false" />
</xs:complexType>
here the attributes like FullAddress, PostcodeRecodedare , etc. are not being return by the web-service when it is getting the default value false. But, if it gets true then , it is being displayed at the BPEL console.
Do you have any idea how can I catch the attributes and its value even when it gets the default value which is already set. Previously, it was returning(it was not being displayed at the console).
Thanks once again for your valuable suggestions...!!!
Chandrachur.

I am facing problem while reading values from properties file ...i am getting null pointer exception earlier i was using jdeveloper10g now i am using 11g

i am facing problem while reading values from properties file ...i am getting null pointer exception earlier i was using jdeveloper10g now i am using 11g

hi TimoHahn,
i am getting following exception in JDeveloper(11g release 2) Studio Edition Version 11.1.2.4.0 but it works perfectly fine in JDeveloper 10.1.2.1.0
Root cause of ServletException.
java.lang.NullPointerException
at java.util.PropertyResourceBundle.handleGetObject(PropertyResourceBundle.java:136)
at java.util.ResourceBundle.getObject(ResourceBundle.java:368)
at java.util.ResourceBundle.getString(ResourceBundle.java:334)
at org.rbi.cefa.master.actionclass.UserAction.execute(UserAction.java:163)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:432)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

I am facing problems while openin an application in facebook and other places.when i go to the application,an error shows and firefox closes autmatically either i send error reports or dont.....plz help

i am facing problems while openin an application in facebook and other places.when i go to the application,an error shows and firefox closes autmatically either i send error reports or dont.....plz help

Notes:
1) Please use the code tags when posting code or JNLP/HTML. It helps to retain indentation and avoids asterisks and plus sings being interpreted as formatting marks. To do that, select the code/JNLP etc. and click the CODE button seen on the Plain Text tab of the message posting form.
2) That launch file is invalid. You might check it (and the project in general) using JaNeLA.
3) The only place that SimpleSerial class could be, that the JRE would find, is in the root of aeon.jar. Is it actually there?

Hi Experts , I am currently facing problems while running restricted version copy .. The log says 0 location products copied and that the process has has timed out. the error message is /SAPAPO/MVM_INT_SVC_CO_VER_LCW reported exception in task DP00014, th

Hi Experts , I am currently facing problems while running restricted version copy in sap apo .. The log says 0 location products copied and that the process has timed out. the error message is " /SAPAPO/MVM_INT_SVC_CO_VER_LCW reported exception in task DP00014 " , then ending in time limit exceeded. could anyone explain why this happens. please note even if the log says 0 location products copied , in reality they have have been partially copied.
Regards
Jerel

Hi, thank you for your replies, I found out few things about my servlet, and its portability
and i have few questions, although i marked this topic as answered i guess its ok to post
I am using javax.servlet.context.tempdir to store my files in that servletcontext temporary directory. But i dont know how to give hyperlink
of the modified files to the user for them to download the modified files.
What i am using to get the tempdir i will paste
File baseurl = (File)this.getServletContext().getAttribute("javax.servlet.context.tempdir");
System.out.println(baseurl);
baseurl = new File(baseurl.getAbsolutePath()+File.separator+"temp"+File.separator+"files");
baseurl.mkdirs();so i am storing my files in that temp/files folder and the servlet processes them and modifies them, then how to present them as
links to the user for download ?
and as the servlet is multithreaded by nature, if my servlet gets 2 different requests with same file names, i guess one of them will be overwritten
And i want to create unique directory for each request made to the servlet , so file names dont clash.
one another thing is that i want my servlet to be executed by my <form action> only, I dont want the user to simply type url and trigger the servlet
Reply A.S.A.P. please..
Thanks and regards,
Mihir Pandya

Facing problems while mapping fields in LSMW.

Hi Friends,
       i got a requirement to upload the address. Address is in
flat file.requirement is to use LSMW with object 0602 and the
standard report program is RSADRLSM02.This standard report
program uses the structures for uploading are ADR_LSM0 to
ADR_LSM6.But i have some fields in the source structure are
not at all related to the fields in destination structure(i.e ADR_LSM0 to ADR_LSM6)therefore i am facing problem while
mapping the source and destination fields.is there any other
way to map the fields.Please help me it's very urgent.
Thanks in advance.
Regards,
Sumiti Gupta.

Thanks for the reply santosh.
GIS FIELD                                      SAP LOCATION
ADDR_GID(10char)                     EXADR-KUNNR
STR_NO(10)                               ADR_LSM0-STRT_CODE
STR_NAME (42)                         ADR_LSM0-STREET
ADDRESS_UNIT(7)                     ADR_LSM0-HOUSENUM_H
                                                      and
                                                 ADR_LSM0-HOUSENUM_L
ADDRESS_UNIT_TYPE(5)           EVBSD-VBSART
POST_CODE (10)                       ADR_LSM0-POST_CODE
MUNI_NAME (40)                        EXADR-APPLDATA
MAILING_CITY(60)                      ADR_LSM0-CITY_NAME
MAP_PAGE(4)                           EADRSTRTGRID_GRID_ID
EVAC_ZONE(1)                          EVBSD-ZEVAC
PIN_NUM (18)                            EHAUD-PLTXT
in the above fields the structure with ADR_LSM0 are found with the other fields i m not able to find the similar fields in the destination structure.Please help me.
Regards,
Sumiti Gupta.

HT204266 I am facing problem to connect to the App Store using 3G and wi-fi

Hello
I am facing problem to connect to App Store from my iphone using 3G and wi-fi. It allows me to update the installed apps.

The iTune Store is not available in certain countries
http://support.apple.com/kb/TS3599

Facing problem in connection with OWB client

Dear All
Greetings!!!
Im new to Datawarehouse building. I have installed OWB R1 at my own pc.I am facing problems in connecting OWB client..What exactly to put in Host name and Oracle Service name. i am logging in with the same system/password with normal login. Please guide me to enter in the datawarehouse world..
Thanx and Regards
Nukesh Bhoyar
Mumbai(India)

Hi Nukesh
I know this doesn't really answer your question but Oracle have just made Release 2 of Warehouse Builder available and based on all of the info through this forum and other places, if I was you I would download R2 and install it instead of R1, as it is deemed to have way more functionality.
Cheers
M

I am facing problem while installing addon

I am facing problem while addon installation
Steps that i follow
1. Develop Custom Application in VB.Net.
2. Created Setup Wizard.
3. Create ARD File.
4. I start the SAP B1 - Administrator - Add On Administration.
When I specify this ard file it is trying to install the add-on. after few second it flashes the mession that it could not file myaddon.msi file in temp folder of windows. After this when i close that dialog box. it contiune with installation (may be in silent mode). it takes near about 1/2 an hour and after completing this setup it shows error of installation failed.
I don't why it is happening. Any solution for it.
Please Help Me.....

Hi Owen,
I have tried .net Package & Deployment as well as InstallShield 2008. finally i have tried B1DE also. B1DE gives us template only in vb.net but not in C#.net and i want this in c#.net.
I was trying to understand the code that it creates. I won't be able get the code also.
I would like to go from other way apart from B1DE.
Need Urgent Help...

Facing Problem While connecting Remote

Similar Messages

Maybe you are looking for