Facing the error : Status and active flag in one item do not match

Hi Experts,
I am getting error : Status and active flag in one item do not match in GOA distribution and while adding item in the item data , following are the relative information :
I am using SRM 4.0 and Item is free text.
Please help if you have faced such an error.
Thanks,
Atul

question not clear. you have activate one line item and the same not in ECC contract.
for ex
4600001000 - GOA
item 1 - active
ecc
4600001000 - contract
item - inactivate
-locked
muthu

Similar Messages

Receiving error 5002 when trying to purchase one item but not when purchasing anything else

So I am able to purchase other things fine but am stuck with one particular item. I have submitted the itunes help form twice and no response thus far. I see that some people say that the error is something to do with billing which makes little sense to me as most everything else purchases fine. I even purchased some things after i first got the 5002 error and have already recieved the bill for it.
Anyone know of any way to fix this issue?

I'm having the same problem trying to buy a CD, I was able to buy a song but not a CD ?????

I want to run my office website in firefox but the error is saying active x and java not installed

i want to run my office website in firefox but the error is saying active x and java jvm not installed in firefox
after installing java and jre the website is opening but in the righ side tree is there that it is not opening

It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See "Disable virus scanning in Firefox preferences - Windows"
*http://kb.mozillazine.org/Unable_to_save_or_download_files

Facing the error in activate data in DSO

Hi Experts,
i am facing the error while activating the data in DSO. i am getting data in NEW DATA.
please let me know if you have concerns..

hi Sowjanya,
Go to RSA1 -> 0MATERIAL (i think this is your characteristic, but please check, it is not very clear from screen shot).
Right click on 0MATERIAL -> maintian master data -> you'l get a selection screen. Enter value "Coaching" for material. It will most probably give you a pop-up saying that the value does not exist.
Now execute the selection screen without entering any value (the timer on the top). Create New record from the Create icon on top. Enter value Coaching for material. Rest fields should be left blank. Save and come back.
Now right click on 0MATERIAL -> Activate Master Data.
Once activation is done, you should go and activate your data.
IF the above does not work, then the error is in data that you loaded to your DSO. For that you will have to delete the request from your DSO. Now go into RSA1-> PSA (2LIS_01_S262) -> right click -> manage. Edit data into PSA : turn the value Coaching to COACHING. Save and come back.
Re-execute the DTP which loads to DSO, repeat the activation.
Please share if this works / not.
Thanks,
Sheen

Facing the error in DSO.

Hi Experts,
I am getting error in standard DSO while activating the active data facing the error like below.
please let me know if you have any one idea about this error.
thanks,
kavya.

Hi ,
Is 30,40 a valid currency ? I don't think so !! Currency will be USD, INR, CAD something like that .
If it is not a valid currency then you can try correcting the data at PSA and also inform the business to correct at the source transaction.
If yes(valid) then try to transfer the currency from the source system as follows
Go to the source system->right click->transfer global settings.... Select Currencies and then select Update and then execute it, and then load the Data.
Also please be informed that the infoobject 0LOC_CURRC2 refers to 0CURRENCY infoobject .
Hope this helps...
Regards .

How to reset the response status and response header

Dear Masters
Actually we are using NTLM Authentication process to get the system login id for our web application. The problem which I am getting is after running the NTLM Authentication Code I am not able to call the action class. It is telling 400 Server error bad request. I am using Struts Dispatch Action Class. In Dispatch Action I will be passing a name (eg. method) as a parameter in struts-config.xml file and using that parameter I will be calling the respective method in the Action class. The problem which I am facing is after running the authentication code I am not able to fire the action class. It is telling the error in the console as "parameter named method is not found". Actually in NTLM Authentication code they are setiing the response status to www-authenticate,NTLM. If I reset the response status back to the normal form I think i will be able to fire the action class. Please give me a suggestion on how to reset the response status and response header back to the normal form. Any solution to this is appreciated. Please respond your reply as soon as possible. Thanks in advance.
Regards
Ramesh

Hi,
I think, a servlet filter is what you need. Please check the following URLs on how to go about creating a filter.
http://dev2dev.bea.com/pub/a/2005/05/decorators.html
http://www.onjava.com/pub/a/onjava/2003/11/19/filters.html
http://www.onjava.com/pub/a/onjava/2004/03/03/filters.html?page=1
Cheers,
vidyut

NVSRUN (nVision-Report) - nVision process going in the error status

NVSRUN (nVision-Report) - nVision process going in the error status for all nVision reports submitted from the web.
All nVision reports submitted online from the web are failing. Need to create new run control ID? How to do that for NVSRUN process?
========================================================================================
Message:
Process Request shows status of 'INITIATED' or 'PROCESSING' but no longer running

Make sure u can open excel from the process scheduler server manually. when excel.exe gets crashed on the server, nvision reports may start to fail on the web. if u have too many excel.exe on the task manager also, u might want to kill the executables by suspending the prcs.
make sure u have the right parameters for the drilldown and layout paths. this also can contribute to the process running to error status.
Need to add the run control id - for a drill down report request u don't need a run control id. for a report book u can always add a run control parameters for every run. u can also differentiate the reports by the business units with your run control ids.
Thanks

I have just bought an iPhone 5 and it won't sync to iTunes. It says it needs iTunes 10.7, which I have downloaded and installed. I still get the error message and looking at "about iTunes" it says 10.6.3. What do I do??

I have just bought an iPhone 5 and it won't sync to iTunes. It says it needs iTunes 10.7, which I have downloaded and installed. I still get the error message and looking at "about iTunes" it says 10.6.3. What do I do??

Perhaps check to see if you're accidentally running two different versions of iTunes. There's some information on troubleshooting that in the Opening iTunes section of the following document:
Troubleshooting iTunes installation on Mac OS X

HT204053 I am running Windows 7 and have tried to install iCloud. No matter what instructions I follow, I still get the error message "This Apple ID is valed but is not an iCloud account." How can I resolved this?

I am running Windows 7 and have tried to install iCloud. No matter what instructions I follow, I still get the error message "This Apple ID is valed but is not an iCloud account." How can I resolved this?

I've tried both. First, I tried on my pc, where iTunes had installed iCloud when it last updated. I have iTunes installed on this computer (and on my iPad and iPhone), but that wasn't the issue.
So I went online, thinking I needed a separate iCloud Apple ID, but it prompted me for my current Apple ID and gave me the message about my ID being "valid" but not an iCloud account," which, lol, was what it had asked me to do in order to create one. I checked, and at least one other user is having the same issue. I'll attempt to copy/paste the Support request url: https://discussions.apple.com/thread/4430653?tstart=0
Thank you for any help you can give.
Trish

Hi , I suhail khan from india and i am user of iMac system 10,1.These days i am facing the sound enabling issue with my iMac system I am not able to hear sound in my iMac system.So kindly suggest me how to enable sound in my iMac . Please no the needful.

Hi , I suhail khan from india and i am user of iMac system 10,1.These days i am facing the sound enabling issue with my iMac system I am not able to hear sound in my iMac system.So kindly suggest me how to enable sound in my iMac . Please no the needful.

Take each of the following steps that you haven't already tried.
1. If you've recently plugged anything into the audio-out (headphone) port, plug and unplug it a couple of times.
2. From the menu bar, select
 ▹ System Preferences ▹ Sound ▹ Output
Check the settings. The internal speakers should be selected as the output device, the Mute box should not be checked, and the volume slider should be at least halfway to the right.
3. Look inside the headphone port. If a red light is coming from the port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a headphone mini-stereo jack of the proper size.Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
4. Boot in safe mode by holding down the shift key at the startup chime. It will take much longer than usual. You don't have to log in; just reboot as usual (without holding any keys) when the login screen appears. (Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.)
5. Reset the NVRAM.
6. Reset the SMC.
7. Reinstall OS X after backing up all data as a precaution. You won't need your backup unless something goes wrong.
8. Make a "Genius" appointment at an Apple Store.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to bare metal from any of them.) Don’t erase the recovery partition, if present.
*An SSD doesn't need to be zeroed.

I am trying to updat to 5.0 i have the latest version of itunes but it bring up the error 3194 and i have tried everything that it suggested includeing removing itues and reinstalling it i did get an error when it updated but dont know why and what for

i am trying to updat to 5.0 i have the latest version of itunes but it bring up the error 3194 and i have tried everything that it suggested includeing removing itues and reinstalling it i did get an error when it updated but dont know why and what for

sorry i was typing fast and didnt check spelling and stuff

TS1424 Error 42110 appears and cannot watch a movie I pay for rental. I can see it is downloading, but as I click on it to watch it, the error appears and does not let me watch it.

Error 42110 appears and cannot watch a movie I pay for rental. I can see it is downloading, but as I click on it to watch it, the error appears and does not let me watch it.
what can I do to resolve it?

Hello kmb_cb_lb
If you cannot get your rental to play, then report the issue to the iTunes Store to get it resolved or refunded.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Regards,
-Norm G.

Transitioned from an older G5 Pro to a new iMac. My Final Cut files are on a 2T WD external HD. When I try to boot I get a "General Error 41" and files do not load. Took the WD to the Apple Store and tried it on one of their iMacs...it works OK. Ideas?

Transitioning from an older G5 Pro to a new iMac. My Final Cut Express files are on a 2T WD external HD. When I try to load a project to the iMac I get a "General Error 41" and the files do not load. Took the WD the Apple Store and tried it on one of their iMacs...it works fine. The problem seems to be in my new iMac, other WD's with different files load OK. Any ideas?

Hi
Can it be so that You try to boot a G5 (Power) Mac from one external hard disk - then try to boot an INTEL Mac from same external Mac.
WILL NOT WORK - It's not just the Mac OS Extended formation that plays a part here - they have to be formatted differently to be bootable on each system.
I don't think there is any solution to this AT ALL.
When You format a hard disk.
• Select Partitions
• Under the graphic representation to the left there is an Alternative button
Here You select if it's supposed to be Bootable on a Power CPU or INTEL-CPU
No other possibilities.
Yours Bengt W

Please help me how concatenate all the error messages and send it as out parameter value.

Hi Experts,
Please help me how concatenate all the error messages and send it as out parameter value.
Thanks.

Agree with Billy, exception handling is not something that is done by passing parameters around.
PL/SQL, like other languages, provides a suitable exception handling mechanism which, if used properly, works completely fine. Avoid misuing PL/SQL by trying to implement some other way of handling them.

TS3694 I keep getting the errors 12001 and 11222. Anyone out there know why I get these errors trying to connect to the iTunes store?

I keep getting the errors 12001 and 11222. Anyone out there know why I get these errors trying to connect to the iTunes store?

http://manuals.info.apple.com/en_US/NewtonProgrammerRef20.PDFError12001
Error 11222
http://support.apple.com/kb/TS3297

Facing the error : Status and active flag in one item do not match

Similar Messages

Maybe you are looking for