Facing the issue Incomplete results (due to index-reload or timeout). Query will be resubmitted in 0 ms. 0 tries left. in FAST ESP 5.3
Hi ,
I am getting the following problem in my FAST ESP 5.3 , after recently updating the new Index profile. It was a Hot Update. Have already reset the index, but still this message keeps coming every 6 hrs. Please suggest.
Its a 2 node setup with 5 active partitions.
Thanks in Advance
[2014-08-25 11:59:53]
WARNING
qrserver
Server1
15100
systemmsg
Error received while searching tcp/manufsis1.manu:15150. Error: [18] No engine available for partition 3
[2014-08-25 11:59:52]
WARNING
qrserver
Server2
15100
systemmsg
Error received while searching tcp/manufsis2.manu:15150. Error: [18] No engine available for partition 3
[2014-08-25 11:59:52]
WARNING
qrserver
Server1
15100
systemmsg
Error received while searching tcp/manufsis1.manu:15150. Error: [18] No engine available for partition 3
[2014-08-25 11:59:52]
WARNING
qrserver
Server2
15100
systemmsg
Incomplete results (due to index-reload or timeout). Query will be resubmitted in 0 ms. 0 tries left.
If there was an index profile update, could you try to clear qrserver cache and redeploy views:
- stop the qrserver,
-delete the qrserver cache ($FASTSEARCH/var/qrserver),
-start qrserver and run the following two commands from bin:
view-admin -m deploy -a
view-admin -m refresh –a
You might want to do this during off peak hours.
Also, from the server(s) running topfdispatcher can you check if you have duplicate entries in the enginerc-tld_0 file(located in %FASTSEARCH/var/searchctrl/etc)
Similar Messages
-
Hi All,
I am working on FI..
I am using the cube 0FIGL_V10 which is Virtual Cube related to Balance Sheeet and Profit and Loss, which has to get the data from Basic Cube 0FIGL_C10..
This Basic Cube having the full data..
as per the clients requirement, Queries on 0FIGL_V10 are requied.... those are 0FIGL_V10_Q0001, 0FIGL_V10_Q0002 and 0FIGL_V10_Q0003...
While running the query, i am getting the error message like
<b>Abart Characterstics 0PSEGMENT, 0SEND_CCTR and 0OI_LEDGER are available in the InfoCube...</b>
i have checked the definition of Query in help.sap.com, there won't be any objects like this.....
Even i have Checked Function Module i.e RS_BCT_FIGL_DATA_GET_VC10, in this under the import tab my Basic Cube has maintined.. i.e 0FIGL_C10..
Please anybody explain me...... Your help will be very much useful to me...
It is very urgent....
Regards,
Kiran TelkarHi Kiran,
As there are few changes to the infoprovider of these queries,you are getting the errors that you have mentioned.
We have created a note for this issue but still it is not yet released for customers.
As a work around you can do the following to remove the errors:
1. Open these queries in 'Query Designer' (in BEx) then it will give
an option to Repair. Then click on 'Repair' and save the query. This
will remove the 2 errors (below) and check the same by executing the
query in RSRT.
Characteristic 0PSEGMENT no longer exists in InfoProvider
Characteristic 0SEND_CCTR no longer exists in InfoProvider
2. Now, remove the filter Ledger in Query Designer by deleting it and
then save the query. Now execute the query in RSRT you cannot see the
errors.
After the changes to the infoprovider, queries were not adjusted but now you can use the above mentioned work around to remove the errors. Please check the output result and then let me know your observations as I want to know whether the queries gives the correct result in a business sense.
Thanks & Regards,
Latha R -
I was facing the issue in configuration gmail id in iphone 4 some error smtp u cant send email
Error in configuration gmail id in iphone 4
Yes, I have the same problem only with one sender. Not sure why it is happening, very fustrating, and sure would love to know the solution. I have been trying to resolve this for a few weeks now.
the sender told me they just switched providers to Time Warner Road Runner (carolina.rr.com)
Emails from this sender always come in to me as:
"This message can not be displayed because of the way it is formatted. Ask the sender to send it again using a different format or email program. message/rfc822 -
The javascript files are getting loaded in the reverse order in Firefox 28 but it works fine on IE, Chrome and Firefox 27 as well. So what exactly are the changes made in firefox 28 that causes this??
The usual place to start looking for "what was changed" in a particular new version release is the Release Notes for that version. <br />
https://www.mozilla.org/en-US/firefox/28.0/releasenotes/
From that page you can use the hyperlink for the [https://bugzilla.mozilla.org/buglist.cgi?bug_status=RESOLVED&bug_status=VERIFIED&bug_status=CLOSED&f1=target_milestone&f2=cf_status_firefox28&f3=target_milestone&j_top=OR&o1=anywords&o2=anywords&o3=equals&query_format=advanced&resolution=FIXED&v1=mozilla28&v2=fixed%2Cverified&v3=Firefox%2028&order=bug_id&limit=0&list_id=9960032 complete list of changes in this release], which displays the '''RESOLVED, VERIFIED, CLOSED''' Bugs reports for that version. 3934 Bugs are listed there for the Firefox 28.0 Release version. -
Facing prolem in Dashboard 4.1, while fetching data from Bex Query
Hi Exports,
I am facing an error message " Failed to (de-)serialise data. (Xsl 000004)" while fetching data in Dashboard from Bex Query.
The query is getting connect. while drag n drop some dimensions and measures then going for Refesh or Run Query, geting this error.
The same query is working fine with other comp like webi n crystal.
Anybody having solution for this please let me know. I am stuck somewhere.
Thank YouHi,
Check the data in the infoProvider.Reduce the Bex query Characteristics & Key figure fields.Try to identify due to which characteristsic adding in Bex Query ,are you facing the issue.Check that characteristic data in the infoProvider.
Regards,
Venkat -
itunes imports cd; but they are all small files, and incomplete. Itunes plays neither the cd nor the imported songs. Anyone else faced this issue?
i've had this happen when the cd is extremely dirty. usually only one or two tracks though, not a whole cd.
-
in FCP x backup process is constantly running in background even though its done which results into slow working of FCP x. any idea to resolve the issue? I am using 10.1.3 and facing the problem ever since i have updated my FCP x to 10.1.3
Go into preferences and under playback turn off background render. That helped speed things for me when working with large files.
-
Always facing the "Not Responding" issue while launching the internet explorer 11. I have tried reset in advanced, deleting all cookies, history and all. Also I did change the default site to https://www.google.com. But no result.
Some times after some time, able click on new tab and did open any urls. But it is rare. Please help me on this issue. Because of this unable to work with QTP/UFT tool.
I am getting on top of the screen the below error -
Error on top the ie screen :
res:/ieframe.dll/acr_error.htm#google.com,https://www.google.com/ - Internet Explorer (Not Responding)
I am getting at the bottom of the screen the below error -
Error at the bottom of the ie screen :
A problem with this webpage caused Internet Explorer to close and reopen the tab.Hi,
Please refer to the following link to troubleshoot this issue:
http://msdn.microsoft.com/en-us/library/dn338138.aspx
Check the browser add-ons
Check the browser rendering mode
Then, please also make sure to install latest Windows Updates which might address this issue.
Update your anti-virus program and perform a security scan incase some virus cause this issue.
Yolanda Zhu
TechNet Community Support -
Loads delayed due to Indexing Issue
HI SAP GURUS ,
Please suggest correct answer as we have an issue where Deletion / Creation of Index process takes long time to complete .
Also how does the partitions in an Infocube grows & to Increase the performance what steps one should take .
Full points will be rewarded for right answers
Regards ,
Subash BalakrishnanHi Subash,
Firstly your question sis vrey generic. It depends that it is taking time in creating Index on DSO or InfoCube.
InfoCubes are more prone to Index creation issue than DSO, due to high number of uncompressed requests. However this also depnds on the database due to archicture:
ORACLE:
With Oracle database, If you have a cube with 1000 uncompressed requests and 10 dimensions (every dimension brings with it a local bitmap index) you have 1000 partitions for the table itself and 10 x 1000 index partitions which makes a total of 11.000 database objects. This amount of objects hurts most when updating statistics or dropping/recreating secondary indexes. In situations with a high load frequency you will most certainly run into problems in this area sooner or later.
If you do a statistics update, all these 11.000 objects will receive new statistics which will take some time and may raise locking problems during execution or at least a serialization when changing the statistics fields in the database catalog tables.
If you drop/recreate secondary indexes, all these objects must be removed or created in the database catalog which also is a serial operation and may again rise locking situations and/or long runtimes. Additionally there is lots of DB cost for returning the allocated disk space.
You will not experience trouble from this direction in the beginning, when the number of partitions is low. But you will run into problems randomly at first, when the number of partitions increase, and permanently, after the number of partitions have exceeded some (not specifiable, system and context dependent) threshold.
SQL Server:
With SQL Server 2005 onwards, there is limitation of 1000 partitions for a table. And each loaded uncompressed request in InfoCube is a partition in SQL Server. In BW System, each uncompressed requests are loaded in one partition and once 1000 partition limit has been reached in a SQL Server database, it will continue writing each new request to the 1000th partition and will write an error to the system log (SQL Error 7719). This is done only to avoid a hard failure when loading data, it is not the recommended business process that one should keep loading requests to the last partition. Continuing to load to the 1000th partition could cause a performance problem later when trying to delete requests and creating indexes and updating statistics of the InfoCube.
How to check number of partitions on the SQL server database:
Execute report RSDD_MSSQL_CUBEANALYZE
- Menu Settings => Expert mode
- Press the Details button
- Choose the number of minimum partitions (choose let say 500)
- Press the button Start Checks
This will display all the tables with more than 500 partitions in the database.
So, to avoid this index creation issue for InfoCubes, it is suggested that one should keep the less number of uncomressed requests in the InfoCube. Compress the InfoCube with the latest request whereever possible.
Hope this helps. Award points if helpful.
Regards
Tanuj -
I use my mac book to dj. however, i tend to get the beach ball alot. is this due to lack of memory or is it something else. ive been thinking about getting more memory but i am not sure what the issue is...i would like some advice before i go and buy more memory if it is not needed... i also do not keep my music on my lap top
Okay, so we've eliminated the lack of space since you have plenty.
See the screenshot from my Mac here:
Page ins and page outs - post those (or just post the same type of screenshot). If you have a lot of those, that means that your machine needs to keep swapping RAM around to make the best of what is available which can result in slow responses.
Also post the total amount of RAM you have (in my case, I have 12 GB)
You free RAM of 221 MB is very, very low - I'm guessing you only have a total of 2 GB. If that is the case, I would absolutely max out the machine (if you don't know how much RAM you can put in, post your model number here so we can help with that). -
I'm facing performance issue while accessing the PLAF Table
Dar all,
I'm facing performance issue while accessing the PLAF Table.
The START-OF-SELECTION of the report starts with the following select query.
SELECT plnum pwwrk matnr gsmng psttr FROM plaf
INTO CORRESPONDING FIELDS OF TABLE it_tab
WHERE matnr IN s_matnr
AND pwwrk = p_pwwrk
AND psttr IN s_psttr
AND auffx = 'X'
AND paart = 'LA' .
While executing the report in the Quality system it does not face any performance issue...
When it comes to Production System the above said select query itself it is taking 15 - 20 minutes time to move further.
Kindly help me to over come this problem...
Regards,
JessiHi,
"Just implement its primary Key
WHERE PLNUM BETWEEN '0000000001' AND '9999999999' " By this you are implementing the Primary Key
This statement has nothing to do with performance, because system is not able to use primary key or uses every row.
Jessica, your query uses secondary index created by SAP:
1 (Material, plant) which uses fields MANDT MATNR and PLWRK.
but it is not suitable in your case.
You can consider adding new one, which would containt all fields: MANDT, MATNR, PWWRK, PSTTR AUFFX PAART
or - but it depends on number of rows meeting and not meeting (auffx = 'X' AND paart = 'LA' ) condition.
It could speed the performance, if you would create secondary index based on fields MANDT, MATNR, PWWRK, PSTTR
and do like Ramchander suggested: remove AUFFX and PAART from index and where section, and remove these unwanted rows
after the query using DELETE statement.
Regards,
Przemysław
Please check how many rows in production system -
I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...
Has your carrier been having issues with Call Display? Do the telephone numbers come up when people call, or does it just show 'Unknown Number' or 'Blocked' ?
-
Starting AMT FailedI am facing the same issue while opening AMT/Mobile Sale
Hi All,
I am facing a issue while opening AMT/Mobile Sales Appl/System Maintenance. I am getting the error saying 'UI_CORE_APPL_LAUNCH_FAILED_STA'. Could anyone out there please tell me how to resolve this issue?
I checked the UID and PWD under HKEY_LOCAL_MACHINE\SOFWARE\SAP\MSA\MW\secutiry for IDES DB and they are consistent with the ODBC parameters for IDES.
Much appreciated,
Karuna.Hi All,
my issue is resolved. The problem with my issue was the missing entry in the table SMO_AUTH_SYS. I found the note 687679 and ran the report according to it. With that table SMO_AUTH_SYS was populated with the record. Later i was able to connect to AMT and gave the standard role SAP_AMT_USER and since then i am able to log into MSAA application and also MSY application
My issue is resolved. Thanks for everyone who tried to help me out.
Thanks,
Karuna. -
Hello Guys,
I am creating resultsource from central admin. If I create it from central admin it works fine. But if I am creating result source from power shell scripts it shows me following error message.
An exception of type 'Microsoft.Office.Server.Search.Query.InternalQueryErrorException' occurred in Microsoft.Office.Server.Search.dll but was not handled in user code
Additional information: Search has encountered a problem that prevents results from being returned. If the issue persists, please contact your administrator.
Any suggestion ?
Thanks in Advance.Hi,
Please provide more specific information about the issue. What type of content source you tried creating via powershell?
Make sure you are using the approproate permission and search service application.
Here is the reference for creating content resource via script:
http://technet.microsoft.com/en-us/library/ff607867(v=office.15).aspx
Regards,
Rebecca Tu
TechNet Community Support -
While executing the query in the web template I am facing below issue
Hello SAP geniuses,
Please help me on my issue ,
while executing the query in the web template i am facing below issue.
The variable for characteristic (region) is appearing but this characteristic (region) is not appearing in the free characteristic zone but when we are executing the query with out webtemplate it is showing both variable and free characteristic
can anybody help us to identify what is the issue with the web template.
Thanks
AlokHi,
Plz check ur report and execute at the designer and take its technical name and go to RSRT. log out and log in and try..
if not check ur authorisation.
Regards....KP
Maybe you are looking for
-
Thunderbird is synched with IMAP to a GMail account. The only time long delays occur is copying messages to the sent mail folder. Is memory or storage within Thunderbird an issue?
-
Custom Connection info from an XML file
I am writing a class that implements OnBeforeChangeUserProfile PEI. I will connect to a database to verify information. I want to be able to load the connection information from an XML file so that I won't have to compile the code for different serve
-
After upgrade to ff14, how do i move "new tab" button from the left to the right?
after i upgraded to ff 14, i found that the "open new tab" button moved to the left of the tabs. how do i move the button back to the right of tabs? i've tried the customize, but it won't stay on the right when i hit done.
-
Safari couldn't open page because server stopped responding
i keep getting this error when i try to open a page on safari SAFARI COULDN'T OPEN PAGE BECAUSE SERVER STOPPED RESPONDING It happens whether on wi-fi or cellular data -
-
Initial installation in AD environment
Hello, I would like to implement OS X Server in my Windows 2003 AD environment, specifically use the wiki and iChat server. I notice in the documentation you have 3 implementation options Standard Workgroup Advanced My vision is to only use the Wiki