Facing too much problem while restarting my phone

When my phone gets turn off,and I put it on charging my phone restart with 3-4% battery and then with in a minute it becomes 0% and turn off again. It again restart but same goes for 7-8 times and after that it goes with the normal charging, please tell any solution

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs. If it fails to help, please do it again but increase the wait time in Step 4 to 2 hours, and perhaps as long as 4-5 hours.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

TS1702 After upgrading my iphone 4s to ios 6 it giving too much problem one battery and other is that when ever i open emails or safari or facebook it automatically comes to main page

please contact me i am receiving too much problem in iPhone 4S after upgrading it to ios 6
it automatically comes to main page when ever i used to open surfing ,safari,gmail,viber and etc...
<Personal Information Edited by Host>

NEVER post your personal info on a public forum such as this. This is a user-to-user tech support site.
If your phone was NEVER jailbroken or hacked to unlock, try these steps as needed:
1. Reset phone (no data loss): Press both home and power buttons for at least 10 seconds, releasing when the Apple logo appears.
2. Restore phone in iTunes using a backup (no data loss)
3. Restore phone in iTunes as new, without using a backup.

Facing a major problem while performing restoration of my mssql DB

Dear Experts,
I am facing a major problem while performing restoration of my mssql DB. The situation is like
1. I have successfully take full and transactional log backup in a external device using MSSQL Server Managemnt Studio.
Backup was successfully completed as per MSSQL Server Managemnt Studio message.
2. Try to restore the same using MSSQL Server Managemnt Studio. It is showing the following error
System.Data.SqlClient.SqlError: RESTORE cannot process database <DB_SID> because
it is in use by this session. It is recommended that the master database be used when
performing this operation.
I have followed the guidelines specified in the link
[SAP Help Link for Restoring the <SAPSID> Backup from a Device |http://help.sap.com/saphelp_nw70/helpdata/en/f2/31ad56810c11d288ec0000e8200722/frameset.htm]
But everytime I am getting the same error message. I have checked with all options but there
was no resolutions. Kindly advise me in this regard.
Thanks and Regards,
Partha

http://social.msdn.microsoft.com/Forums/en-CA/sqltools/thread/37ee8e24-7aaa-472b-861a-fc0cc513338a
hope it helps

I have too much music on my i phone( purchased): This synchronises with my computer and i pad which has larger storage facility: How can I delete music only from my i phone and retain it on my computer and ipad?

I have too much music on my i phone( purchased): This synchronises with my computer and i pad which has larger storage facility: How can I delete music only from my i phone and retain it on my computer and ipad?

On the iPhone, go to Settings > General > Usage > Music (in the Storage Section) > Tap Edit > Tap the Red Circle next to All Music > Tap Delete.

I m having ipad 4 and after upgrading to ios7 I m facing continuously rebooting problem while switching between apps can any buddy help or facing same problem

I m having ipad 4 and after upgrading to ios7 I m facing continuously rebooting problem while switching between apps can any buddy help or facing same problem

Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
1) Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
2) If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/ht4097
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note:
Also consider Deleting any Apps you have Purchased / Downloaded but you now never use..

I was playing candy crush and I had too much problem with my bill your charge too much I want to know what is the problem with this game cost

HELLO
I was playing candy crush and I had too much problem with my bill your charge too much I want to know what is the problem with this game cost

Take it up with iTunes Support - we are not Apple here, we are just users like you:
http://www.apple.com/support/itunes/ww/
Cheers,
GB

Facing a small problem while executing WDA application from portal

Hi Experts,
I developed web dynpro for ABAP application and placed table UI control, which contains 270 records. Executing from SE80, it is working fine and showing clearly all records.
This application integrated in portal, while executing this applicaiton from portal, it is working fine and showing all records.
Here I facing a small problem i.e Pager ( footer area ) of table.
When the table is displayed there are the small box in the below of the table showing ROWS 244 of 270.
244 will be available in a small box. this 244 is not showing clearly, while executing from portal ( last digit 4 displying half part only). but 244 showing clearly while executing from SE80.
Kindly suggest how to resolve this problem.
Thanks & Regards
Sridhar

Hi Gopi Krishna,
Thanks for your time. From SE80, it is working fine and showing clearly row number. There is no property for increase width of small box, which contains current row number).
Facing problem while executing from portal.
Thanks & Regards
Sridhar

Using WAY too much power while sleeping?

I am completely sure that before, my 2008 Mac Pro was using 3 watts (give or take a few) while in sleep mode, which is why I've left it running day and night pretty much since purchasing it. (Power useage based on the digital readout on my "smart" UPS backup.) However, just this afternoon I noticed that it seems to be generating a considerable amount of heat, even when not in use, and my power bill has been abnormally high (like twice what it should be), and nothing can really explain that since virtually nothing else runs in the house for any amount of time. Needless to say, I decided to check the UPS readout while the system was asleep. To my surprise, 175 watts were being consumed while the system had been asleep for hours! No wonder it's been hot in my office, and why my power bill seems to have been going up considerably higher than usual! I've got a power hog sitting here running day and night consuming nearly full power 24x7! (Full power reads about 200 watts, displays off, at idle and 275 watts with displays on at idle.)
Any suggestions on what could have gone wrong that is keeping my system from taking a power nap? I really don't want to power it on and off day in and day out (it gets restarted as necessary). And the Apple Care coverage just ended several months ago. Ugh!

LOL Looking at the console may have answered my problem. It seems that the xrite device manager for my ColorMunki (screen calibration device) is going bonkers, trying to "start" itself every 2 seconds, give or take. But I thought for sure that I've uninstalled this software to use another application using the same device. Clearly, it forgot to uninstall something that is asking to start but no longer exsists.
Here's a snipplet:
9/2/11 11:37:02 PM    com.apple.launchd[1]    (com.xrite.device.colormunki[14665]) Exited with exit code: 1
9/2/11 11:37:02 PM    com.apple.launchd[1]    (com.xrite.device.colormunki) Throttling respawn: Will start in 10 seconds
9/2/11 11:37:08 PM    com.apple.launchd.peruser.501[216]    (com.xrite.device.message[14666]) posix_spawn("/Library/Application Support/X-Rite/Devices/message.app/Contents/MacOS/message", ...): No such file or directory
9/2/11 11:37:08 PM    com.apple.launchd.peruser.501[216]    (com.xrite.device.message[14666]) Exited with exit code: 1
9/2/11 11:37:08 PM    com.apple.launchd.peruser.501[216]    (com.xrite.device.message) Throttling respawn: Will start in 10 seconds
9/2/11 11:37:12 PM    com.apple.launchd[1]    (com.xrite.device.colormunki[14667]) posix_spawn("/Library/Application Support/X-Rite/Devices/ColorMunkiDeviceService.app/Contents/MacOS/ColorMunkiDev iceService", ...): No such file or directory
9/2/11 11:37:12 PM    com.apple.launchd[1]    (com.xrite.device.colormunki[14667]) Exited with exit code: 1
9/2/11 11:37:12 PM    com.apple.launchd[1]    (com.xrite.device.colormunki) Throttling respawn: Will start in 10 seconds
9/2/11 11:37:18 PM    com.apple.launchd.peruser.501[216]    (com.xrite.device.message[14668]) posix_spawn("/Library/Application Support/X-Rite/Devices/message.app/Contents/MacOS/message", ...): No such file or directory
9/2/11 11:37:18 PM    com.apple.launchd.peruser.501[216]    (com.xrite.device.message[14668]) Exited with exit code: 1
9/2/11 11:37:18 PM    com.apple.launchd.peruser.501[216]    (com.xrite.device.message) Throttling respawn: Will start in 10 seconds
9/2/11 11:37:22 PM    com.apple.launchd[1]    (com.xrite.device.colormunki[14669]) posix_spawn("/Library/Application Support/X-Rite/Devices/ColorMunkiDeviceService.app/Contents/MacOS/ColorMunkiDev iceService", ...): No such file or directory
9/2/11 11:37:22 PM    com.apple.launchd[1]    (com.xrite.device.colormunki[14669]) Exited with exit code: 1

Getting 1/2 the speed I'm paying for & in too much pain to be on phone for hours--HELP

My children do a Cyber school and have been getting disconnected from class for months now. I'm also having losing the internet at random times on my desktop. A friend told me how to check my speed (since I know so little about computers) and I found out I'm only getting 1/2 the speeds I'm paying for!!!! I've called Verizon customer service in WHATEVER COUNTRY 6 times now but I have to hang up after any longer than 35 minutes because of chronic pain! Tech makes me turn off my router, check my speed, (when I know they can see the speed right in front of them, after 1 rep told me the speed without my asking) and computer share. Nothing gets resolved, I NEVER GET THE CALL FROM A SUPERVISOR THAT WAS PROMISED, and Verizon closes out the problem after 72 hours!! Seems like EVERYONE ELSE HERE GETS THE SAME RUNAROUND AND LACK OF RESPECT!! One billing person offered me a refund for the difference in speed for only 1 month and offered me to upgrade!! I can't afford to upgrade and the Cyber will work if I would only get the speed I had when 1 started with Verizon in 2002! I said UNACCEPTABLE and am having to call back once a week (because that's all I can handle) to try to get a Supervisor! Can anyone tell me how to get help without the exhaustion of being on the phone forever?!
All I know is I'm paying for 1.1-3 mbps but only getting .439-.864mbps download and 0.08-0.09 upload speeds and I have a Westfall 327W 8 year old modem.

Thank you for replying and sorry it took so long to respond. Now I can't get into my Verizon email so I didn't know I had a response on this site. I was also physically unable to sit at my computer. Here is the info you requested:
Transceiver Revision: 7.2.3.0 Vendor ID Code: 4 Line Mode: G.DMT Mode Data Path: Interleaved Transceiver Information Downstream Path Upstream PathDSL Speed (Kbits/Sec) 864 160 Margin (dB) 20.5 31.0 Line Attenuation (dB) 44.5 29.0 Transmit Power (dBm) 3.3 11.1
on 8/15 I had the slowest download speed yet of 0.17 mbps! I am paying for 1.1-3mbps. My modem is 6 or 7 years old. I'm not sure if I mentioned the last 2 sentences before.

Using too much memory while capturing

I am capturing from my Panasonic deck direct to the G4 via firewire DVNTSC but after only 10 minutes or so FCP quits and it is indicated that I have used up all my 200+GB space.
I think I'm doing something wrong with my settings somewhere because I should not be using this much memory.
Any suggestions?

Do this: log a 12 minute clip then do a BATCH CAPTURE of it.
This gets around the time limit issue of Capture Now. If this still does not work, the symptoms you describe do sound a lot like what people have reported after updating to QT 7.3 with resulting problems with capturing.
If this is the problem, the only sure solution is to erase the system drive and install OSX and your pro apps from the original disks and bring them up to date using the software updater.
If you go this route, either clone your existing system disk or make sure you back up any data on it before you erase the disk. This process will destroy all info on the disk.
good luck.
x

Xperia Z2_Screen problem while making a phone call

Hi,
I have bought a Xperia Z2 two days ago. I think, I have a serious problem. When I want to make a phone call, I am writing the numbers and then press the call button, my screen gets completely dark when the phone is still in my hands (not close to my ears). I can still talk with my phone, but I cannot see the screen, therefore it is very difficult to end the call. If I am pressing the power button one-two or more than one-two times, the screen comes back and then I can end the call. I have a screen protector on my screen, which comes within the package of Z2. I tried if the same problem continues without screen protector or not. The answer is yes, it continues. I boot the phone in the safe mode, but the problem is still there.
I am waiting your help...

I see you did your homework about the screen protector and safe mode.Do you have any case?
Also check if proximity sensor works fine.Dial *#*#7378423#*#*-Service test-proximity sensor.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Is 2.2 Update too much problems ?

Should i wait for 2.3 ?
(Seems to ne some hassles all round
i'm downloading it from itunes as i write, frickin long time to download)
or is this just the usual 1/10 000 bad phone problem ?
thanks for thoughts ?
FB

I cancelled the update to 2.2 when I read the list of "improvements." There was nothing of consequence unless you consider Google Maps Street View important. For me it was a once only novelty on the desktop but really not a big deal. There is nothing important in the update - no copy & paste, no MMS.
Then balancing that is the nightmare that someone thought it a good idea that every push of the home button takes you to the first page. I have 9 pages of apps with similar apps grouped together on individual pages. Eg, all my reading apps are on one page When reading I and I find a word I need to define, I hit the home button, open either the dictionary or the google app get the info then hit home and reopen the ereader. All on the one page. Same with my art apps, all my drawing and photography apps are on the one page. It is easy to move from one art app to another because I can stay on the one page. Same with music, blogging apps, documents viewing and editing, etc etc.
MMS is the only improvement that would be worth putting up with the annoyance of having to continually flip through pages for.
So I stay with 2.1 where using the home button keeps me on the same page.

TOO Much problems with the new mavericks

I did an upgrade from OSX LION to OSX MAVERIK, and now my Mac book pro is a disaster.
Initially Powerpoint 2011 stopped working all the time, then I discovered that by pressing the app store icon, it doesn't work than mean I can not update anything.
Besides, do not operate the capture of images, the terminal an most of the aplications in the utilities.
Hopefully MAC will fix this soon, because it is not normal this kind of problems on a mac,
Is the most disastrous UPGRADE that I ever made: [email protected]
Besides downloading should be similar to the LION, most of us need the software (DMG) in our machines.
THANKS

Please remove your personal email address.
It does sound like a reinstall of OS X may be necessary. If you make a new test user on your computer (http://support.apple.com/kb/PH11468), do the issues persist? Testing in a new user account is the first step.

Why so too much problems?

hey everybody,
why in SAP, the number one in ERP software, everything is so complex????It's incredible.I've downloaded many times SAP Netweaver and everytime, from different links, the lenght of the file was different, there was a problem of CRC and so on............
If you have a problem you have to move in a web of forums and sub-forums of "sys"-sub-sub-forums
I suppose that the real value of this system is its crypticiness.
Bye

Don't get discouraged. SAP is not a simple product and requires patience when learning how to install, implement, and update. The most important thing to know about SAP is there are no shortcuts. Follow the install directions as printed and take a little extra time to read all of the documentation.
I don't know the exact reason that SAP is difficult to install. But you have to remember that these are enterprise level applications that require the full resources of a system to operate efficiently and require a deeper knowledge of systems, OS's, and DB's. In short, SAP ain't no quickbooks (thankfully).

Catbundle.sql taking too much time while running it for CPU-April2011

Hi ,
I am on oracle 11.1.0.7.0 and I am applying the CPU patch April 2011.
OS is Solaris SPARC.
As part of that , i am running the catbundle.sql.
currently , for last 180 mins , the catbundle.sql is at this state :
SQL> PROMPT Processing Oracle Java Supplied Packages...
Processing Oracle Java Supplied Packages...
SQL> ALTER SESSION SET current_schema = sys;
Session altered.
SQL> @?/rdbms/admin/initcdc.sql
SQL> Rem
SQL> Rem $Header: initcdc.sql 15-mar-2006.08:20:07 mbrey Exp $
SQL> Rem
SQL> Rem initcdc.sql
SQL> Rem
SQL> Rem Copyright (c) 2000, 2006, Oracle. All rights reserved.
SQL> Rem
SQL> Rem    NAME
SQL> Rem      initcdc.sql - script used to load CDC jar files into the database
SQL> Rem
SQL> Rem    DESCRIPTION
SQL> Rem      <short description of component this file declares/defines>
SQL> Rem
SQL> Rem    NOTES
SQL> Rem      script must be run as SYS
SQL> Rem
SQL> Rem    MODIFIED   (MM/DD/YY)
SQL> Rem    mbrey       03/15/06 - bug 5092790 add datapump registration
SQL> Rem    pabingha    02/25/03 - fix undoc interfaces
SQL> Rem    wnorcott    03/14/02 - bug-2239726 disable triggers.
SQL> Rem    wnorcott    01/31/02 - function 'active' return 0 or 1.
SQL> Rem    wnorcott    01/30/02 - disable CDC triggers, CREATE_CHANGE_TABLE re-enables.
SQL> Rem    wnorcott    06/26/01 - rid trailing slash. As per Mark Jungermann
SQL> Rem    gviswana    05/25/01 - CREATE OR REPLACE SYNONYM
SQL> Rem    jgalanes    11/17/00 - for Import/Export grant execute on util to
SQL> REM                           SELECT_CATLOG_ROLE
SQL> Rem    wnorcott    09/07/00 - new loadjava syntax for performance.
SQL> Rem    wnorcott    07/18/00 - rid LOGMNR_UID$.clientid
SQL> Rem    wnorcott    06/28/00 - move logmnr_dict view here
SQL> Rem    wnorcott    03/28/00 - fix trigger install
SQL> Rem    wnorcott    03/27/00 - Install change table triggers
SQL> Rem    mbrey       01/26/00 - script to load CDC jars
SQL> Rem    mbrey       01/26/00 - Created
SQL> Rem
SQL> call sys.dbms_java.loadjava('-v -f -r -s -g public rdbms/jlib/CDC.jar');It has run the @?/rdbms/admin/initcdc.sql script and now its not proceeding next.. I am not sure if its stuck or still running.. How do i find that..
what should i do ?
*PS : Ive read this note :Script Fails At Loadjava With ORA-03113 and ORA-03114 [ID 358232.1] But its when it errors out , for me its not erroring out also..*
Thanks
Kk
Edited by: Kk on May 25, 2011 2:41 AM

just an update :
I sat watching it for 3 hours.. then i though of stopping it.. pressed CTRL-Z and boom , it just took me to SQL showing that it had completed...
So , if someone else faces this issue , press CTRL-Z after some 5-10 minutes it will show that its running well.
Regards
Kk
Edited by: Kk on May 25, 2011 3:55 AM

Facing too much problem while restarting my phone

Similar Messages

Maybe you are looking for