Factory calendar assignment

Hi Gurus,
Can anybody please exaplain me the following. We are now running our plant in terms of production process 7 days a week. All these days the the 5 day factory calendar was only assigned. Now the business is wanting to assign the 7 day factory calendar. Here are my questions and this calendar is only for 1 plant.
1) Is there a plaace specifically for each module where the calendaar gets assigned, like sperately for MM,  PP etc. Or everything is the same?
2) Where do we assign the new calendar to the plant? Is it in the plant definition in config? or is there a separate place in config for PP modiule only. Please clarify this
Thanks
ANusha

Dear,
Better change 5 days and 4 days calander to 7 days in SCAL.
Else In OX10 , CR02 change to 7 days. IF plant maintenance not working for 7 days then don't change it.
Do i need to make change on all work centers related to production along with OX10 or what?.
YES
Hope clear to you.
Regards,
R.Brahmankar

Similar Messages

  • Wrong factory calendar assignment to plant

    Hi,
    We define new plant in customizing and assign a factory calendar  ( table T001W ).
    I have wrongly assigned a factory calendar BE to German plant in customizing system and moved to changes to production system. Now I want to change this factory calendar from BE to DE in customizing, but the field is greyed out.
    Kindly advice.
    Regards,
    Abhijit

    Abhijit k wrote:
    Hi,
    > We define new plant in customizing and assign a factory calendar  ( table T001W ).
    > I have wrongly assigned a factory calendar BE to German plant in customizing system and moved to changes to production system. Now I want to change this factory calendar from BE to DE in customizing, but the field is greyed out.
    >
    > Kindly advice.
    >
    > Regards,
    > Abhijit
    Hi,
    Open Enterprise Structure-Define, copy-Logistics - General-delete, check plant-Define Plant-select your plant and open in detail view-click on Table view from your header and select Displaay-changes.Now you can see your factory calender as editable.
    Thanks

  • Factory Calendar issue in creation of Sales Order/ Delivery Order

    Hi all,
    There is one issue. Our user is not able to create Sales Order/ delivery order as he is getting the below error message u201CDate 2010-12-27 lies after the end of Factory calendar F1u201D. But when I checked the plant in customization, the Factory calendar assigned is u201CKRu201D and not u201CF1u201D. So I donu2019t understand why this error message is appearing. But when I checked Factory calendar u201CF1u201D, it was valid only up to 2010 and there are special rules also set. Only few days in the year are working days. Factory Calendar u201CF1u201D description says u201CKOR customers billed on the 25th of every monthu201D
    Please advice.
    Regards,
    Brijesh

    Dear
    If F1 is the correct calander , then goto OP03-Calander Maintenece -select the Holoiday Caleneder  and extende the Valaidity till 2020 and also Select the Factory Calander  do the same till 2020 .Now Goback to main screen of OP03-Plant asisngement -re-assing the same F1 calaneder .
    Secondly check the factory calender of the plant in OX10.Then in SPRO > enterprise structure >Definition > logistic execution>define shipping point .Select you shipping point and assgin the proper factory calender
    .Goto OVX5 , choose your sales organization, click on details, Detailed information tab - Sales Org Calendar (maintain your factory calendar here not Sale Org Calander )
    .Check in VOV8, use the "Propose delivery date" and "Lead time in Days" options to default today's date as the requested delivery date.
    Refer : Public holiday dates issue
    Regards
    JH

  • System does not propose the delivery date based on factory calendar

    Hi,
    I am creating a sales order for a delivery date for this sat which is (2/22/09)
    I have maintained 2 separate calendars for
    1) shipping point
    2) for the route
    The route has a transit time of 1 day and the calendar has sat and sunday as non working.
    the Shipping point has a pick/pack time of 1 day and the calendar has sat and sunday as non working
    The material is available in the warehouse
    Now when i create this sales order i enter the delivery date as 2/22/09, the system does not propose me the delivery date of monday (i.e 2/23/09) It accepts the 2/22/09 delivery date.
    In the schedule line i do see the date as 2/22/09 only.
    The delivery was created with the following dates
    Picking = 2/17/09
    Transportation Planning = 02/18/2009
    Loading =02/18/2009 
    Planned GI= 02/18/2009
    Delivery Date = 02/22/2009
    How can the system give me the delivery date of a sunday when the calendar doesnt allow sunday as working day.
    Also the route time is 1 day in transit so i am not sure why the system is proposing a 3 day transit time?
    Can any one explain the behaviour of SAP for the delivery date logic

    Dspsac,
    Delivery date can be any date.  For instance, if your customer insisted on a Sunday delivery, you would accommodate him, regardless of any calendar.
    From the delivery date, the system counts backwards USING THE FACTORY CALENDAR ASSIGNED TO THE ROUTE by the number of days in the route.  You have to consult the FC assigned to your Route to determine if the GI date has been properly calculated.
    From the GI date, the system counts backward Pick/pack time, using the shipping point calendar, to arrive at Material availability date.
    Calculations are explained in SAP online help
    [Transportation and Delivery Scheduling|http://help.sap.com/erp2005_ehp_04/helpdata/EN/dd/5607e7545a11d1a7020000e829fd11/frameset.htm]
    Regards,
    DB49

  • Which Factory Calendar is used to determine the Sales Order delivery date

    Hi ,
    There is Factory calendar assigned to sales Org and shipping point as well.
    I want to know which Factory calendar is used to determine the promise date on sales order acknowledgement and which one is used to determine the delivery date?
    Appreciate your help/inputs.
    Regards,
    Ram

    Ramy,
    I am not sure what you mean by 'promise date'.  For a given sales order item confirmation schedule, the system calculates the following dates:
    Delivery Date
    Goods Issue date
    Loading Date
    Material Availability date
    Transportation planning date.
    These dates are dependent upon what you have configured, and what your master data is.  If you have transportation scheduling turned on (IMG>SD>Basic Functions>Delivery scheduling and transportation scheduling), then the durations are:
    Route duration (transit), - affected by factory calendar assigned to the route (0VTC, that's a zero)
    Picking time, packing time, Transportation planning time, and Loading time- affected by the factory calendar assigned to the shipping point (OVLZ, not a zero)
    In addition, the Material availability date will be affected by the calendar assigned to the plant (WB03).  The calculated dates may also differ on a given order schedule line, based on whether the sales order is backward scheduled or forward scheduled.  This is particularly important when the calendars all have different holiday schedules.
    Standard SAP help on the matter, with a couple of nice pictures.
    http://help.sap.com/saphelp_erp60/helpdata/en/dd/5607e7545a11d1a7020000e829fd11/frameset.htm
    Rgds,
    DB49
    Edited by: Dogboy49 on Feb 16, 2010 5:08 AM

  • Factory Calendar Issue

    HI Gurus,
    I have a problem with the factory calendar assignment. I created the factory calendar directly in production. Now, I want to assign it to a particular plant. So, I created a similar calendar in DEV and assigned it and transported it. However, this calendar is not available in QA and what happened was all the assignments in that transport from DEV was transported to QA.
    I just want to transport the assignment of only one plant to QA & PRD. What is the procedure? How to do that? I am afraid that if I move this to PRD, it will overwrite all other assignments as it did in QA.
    Please help...
    John

    Hi John,
    you have to transport all the factory calenders in the system at once i.e. all the factory calenders for different plants. you can not transport only one factory calenders for one plant. try to transport all the factory calenders and check it out.
    cheers
    jagan

  • Assignment of factory calendar ID to company code

    Hello,
    I want to implement a report where I need the Assignement of the ID for the factory calendar to the company code. Is there a table in the system?
    thx
    Robert

    Hi Robert,
    Read the factory calendar & plant link from T001w & then read the link between plant & company code in T001k. I am sure you would then be able to get the fields into your report as you want.
    If helpful award points
    Regards,
    Vivek

  • Assigning of factory calendar to plants

    Hi Guys,
    I want to assign 3 factory calendars to plant, could you plz tell me where to assing in IMG.
    Thanks,
    Bhanu

    Hi ,
    As per me u can assign only one factory calender to plant
    SPRO > Enterprise structure >definitin > logistics general > define copy delete check plant>define plant
    wht is logic behind assigning 3 calenders to single plant ?
    Rgds

  • Assignment of FACTORY calendar

    How to assign the factory calendar to resources in a plant.
    Can anyone please tell me the transaction code to do the same.

    Assign a factory calendar in resource (CRC2) -  go to capacity tab, select header ( hat)  and assign factory calendar

  • Error while processing sales order as factory calendar missing.

    "factory calendar missing or error in factory calendar".iam getting this error while processing sales order even though i have assigned it to shipping point and plant and sales org.

    Hi Malik, How are you? I'm sorry to trouble you,
                   Let me introduce, I'm Daniel, and I saw your fantastic asnwer in
    the topic "How to update Factory Calendar in SRM", and might I have the same
    problem. It's with the "factory calendar".
    In transaction va02 when I choose a Delivery Date, and I sent it to process, as
    a result in the "shipping tab" it calculated to the first item one date, and to
    the rest one date different.  I don't know What it happen?
    I debugged the program and I saw that to the first item use to calculate the
    date is the function  'APO_SCHEDULING', and to the rest item use
    'SD_SCHEDULING', and until here I come.
    How can I do to what the dates calculated are the same? or What would be the
    problem?
    I need the dates calculated are equal.
    I looked at it's using two "factory calendar" which are "J4" and "C2". Is this
    correct?
    Thanks In Advance,
    My best regards,

  • How to find out the Factory Calendar ID used by  an Organization

    Hi Experts,
    I want to know Factory Calendar ID used by an Organization.
    Which table store the Factory Calendar information for an organization.
    Is there any function module to get the Factory calendar of an organization.
    Please help me ASAP.
    Point will be rewarded for helpful answers.
    Thanks in advance
    Kulvendra Kumar

    Hi
    chk the view v_001p_m
    there u can find ur org nization so there u wull find the calender assigned to them.

  • Using factory calendars in BI transformations

    Hello All,
    Do we have the option of using factory calendars in BI transformations, like we had in 3.x version update rules.
    I did not see any option for choosing the factory calendar, so i guess we will have to use function modules.
    Please let me know if there is any option available.
    Thanks in advance.
    Manoj

    hi Anton Moskvichev,
    I check in the source system assignment. The source system is checked. While replicating the DS from source system i replicated based on BI 7.0 only. While activating the cube or infoobject from BI content i did not get any transformation or transfer rules for activation. I just got the cube alone..

  • Maintenance Order & Factory calendar

    Hi,
       How to Link Maintenance Order & Factory calendar so that when i execute the 'Cost Evaluation' table
    S115, i will get cost for the maintenance order Activities for specified month based on factory calendar.
    Pleaes Let me know.

    PeteA,
         When i execute the maintenance Order in table S115 with input data fiscal year variant (Calendar Year 4/4/5) , Order type & Month (say 02.2009) system throws message "No table entries found for specified Key" .....
    But when i execute the same table with all input data except fiscal year variant (Calendar year 4/4/5), system gives the output of my order type.
      So i think Fiscal year variant should be maintained in Order. That procedure i want to know
    (Note: In Work center "Capacity' Tab, we can only assign the factory calendar; Not fiscal year variant(4/4/5 year)
      Pls let me know

  • Risks associated with changing to new Plant Calendar assigned in OX10

    Our site is considering changing the factor calendar from 5 days a week to 7 days a week in OX10 for the plant.  We curently use all supply chain modules and otc.  Can anyone tell me the warnings/risks associated with doing this?
    Thank you.

    Hello,
    Orders for Production , Maintenance, Deliveries, Transfer Order  etc. are created according to the factory calendar .
    You must be sure that all operations can be carried out in the seven days of the week (e.g. deliveries), because SAP can be scheduling aTransfer Order for a Sunday and somebody can be calling you for fixing the issue!
    The normal case is that some operations can take place in the weekend (Production, Maintenance) but other Logistic Operations ( Deliveries) are done only from Mo to Fr. If this is your case, I would create an additional seven days calendar and assign it to the work centers in Production and maintenance, but the Plant would remain linked to the old five days calendar
    Hope this can solve your issue.
    Dario

  • Factory calendar doesnt exist

    Hi,All........
    We are creating production order manually with matrl, Prod. Plant and order type as input...When we  enter required quantity for Production and finish date as we are using Backward Scheduling.
    The system throwing a messgae that factory calendar Z3 does not exist.
    Message no:co034......
    Pls guide me to resolve the issue.
    what needs to be checked in the system.
    Rgds,
    Yogesh.....

    Hi Yogesh,
    It seems that you have assigned the factory calendar Z3 to plant or to the workcenter used in the routing for the material.
    This customizing you may have carried forward but probably you have not carried the factory calendar Z3 customising to the client where you are trying to create the order.
    Hence create the factory calendar in customising (SCAL-Tcode) in the client you are working.
    I hope this will help resolve your problem once the factory calendar has being defined in the client you are working.
    Thanks & Regards.
    Santosh Joshi

Maybe you are looking for

  • How can I import 100s of *.ics individual calendar events & todo's from SL into ML Calendar?

    Hi, This question is RE a clean install of ML ... moving from SL (which I did a while back when the HDD with SL died - luckily I had a TM backup). I have a number of calendar events (including to-do's) that I need to transfer to the new ML operating

  • Counting rows when subtracting several slicer options from another

    Hi Everyone I am trying to count the number of rows in a pivot table/chart that equal the value of one slicer value minus other slicer values. I don't know if you can use countrows for this, but I tried countax and I am getting an error for "comparis

  • Tab canvas disappears at run time

    Hi, I have a Content canvas with a data block displaying fields in the top section of the canvas_main. Bottom half of the canvas_main has canvas_tab with three tab pages tab1, tab2, tab3 all have data block (child records fo above block) each. At run

  • How do you make third party application window backmost using labview

    Hi Guys I know i can do whatever i want on labview windows.i can make third party application window frontmost. But How to make third party applicaiton window backmost using labview. Thanks

  • How to add icons in native menu with text

    Hello Guys                  Can Anybody guides me how to add icon in nativemenu system tray.Actually i am making a simple application in adobe air and use minimizing the application into system  tray.On Right  click on the icon present in system tray