Factory calendar error in service order

Dear Guru's
could any body help me in solving the below issue.i created the service notification in iw51 after that i clicked the service order tab then system gives the pop up mesage in that i mentioned order type,planning plant,business area,main work center after that i got the below error.
Date 09.09.2011 is after the valid factory calendar period
Message no. IW432
Diagnosis
You entered a date for which the factory calendar was not maintained in your factory.
System Response
Processing will not be continued.
Procedure
Enter a valid date.
If you want to use the date rejected by the system as a valid date, you must maintain the factory calendar in your system with the help of the Customizing function:
Proceed
If you are not allowed to perform the function, contact your system administrator.
from which master data system is picking the Factory calendar.
how to solve the problem.
Thank you in advance.
suribabu.

Thanks to every body.i solved the problem.

Similar Messages

  • Factory calendar error (returncode = 3)

    Hi,
    I am trying to create planning for product group, but getting error Factory calendar error (returncode = 3)
    Message no. MA408
    I have checked the validity for factory calendor but it is found ok with valid upto 2013. and allocation of factory calendor with plant 1000. the same factory calendor with validity is observed.
    Pl help me out of this issue.
    Regards,
    Anil

    Dear,
    Please check  have you maintained different factory calendars in the customizing for SOP (Transaction MC7F for S076) and for the plant OX10.
    Please use same calendar in MC7F. and check again.
    Regards,
    R.Brahmankar

  • Factory calander error in sales order

    hi all,
             when i am trying to create sales order i am getting the error "10.10.0820 date lies before start of factory calendar. (Please correct)"
    pls help
    thanks
    senya

    Senya,
    Check which calender is applicable for your order.
    Then go to SCAL t-code and change the calendar start date, and enter the valid date. Save that
    Now try again, your problem will be solved
    Thanks,
    Raja

  • Runtime error in service order

    Hi everyone,
    When I try to create a service order I get the following runtime error.
    Has anyone any idea how I can solve the problem?
    Thanks in advance
    Björn

    Hi,
    1.  In the transaction su3, Please add the parameter "WCF_IGNORE_ENHANCEMT" and the values as 'A'   and check. Then u will get to know that error is because of standard or some custom code.
    2. Check by adjusting the view configuration, That exception looks like during the XML conversation. Just check the xml in the method IF_BSP_DLC_CONFIGURATION~GET_CONFIG_DATA.

  • Error In Service order Quotation while Creation Follow-up

    Hello All,
           In facing an error while creating a follow-up in service order Quotation in CRM WEBUI .
    Business Server Page (BSP) error
    Error as Follow
    What happened?
    Calling the BSP page was terminated due to an error.
    SAP Note
    The following error text was processed in the system:
          Message E PRC_MESSAGES_EXT 320 cannot be processed in plugin mode HTTP
    Exception Class     CX_SY_MESSAGE_IN_PLUGIN_MODE
    Error Name     
    Program     CL_BSP_WD_VIEW_MANAGER========CP
    Include     CL_BSP_WD_VIEW_MANAGER========CM002
    ABAP Class     CL_BSP_WD_VIEW_MANAGER
    Method     DO_REQUEST
    Line     43
    Long text     -
    Error type: Exception
    Your SAP Business Server Pages Team
    Thanks in advace.
    Regards,
    Kiran Posanapalli.

    Hello,
    I don't have an answer for you but maybe this helps you in finding one
    The message class PRC_MESSAGES_EXT is used for IPC error messages.
    Maybe you have errors in some IPC java user-exits?
    Hope this helps,
    Kind regards,
    Joost

  • Schedule parameter error in Service Order

    *Hello*
    *I have a problem. I have 4 (1000 to 4000) plants in my SAP ECC6.0. Now im configuring new plant which is (5000). I create notification in PM/CS and with refrence of this notification when im trying to create Service order system errors me this.*
    *Scheduling parameters for maintenance order have not been entered*
    *Message no. CT608*
    *Diagnosis*
    **No scheduling parameters have been entered for mainteance orders in Customizing plant 5000, order type SM04 and production scheduler . IF you do not enter the scheduling type no scheduling can be carried out.*
    *Procedure*
    *Enter scheduling parameters for maintenance orders.*
    *execute function*
    *i have checked in IMG that schedule parametrs are assigned to sm02 in existing 4 plants but not sm04. But in exsiting plants system allows me to create sm04 but not in new plant 5000. Im surprised that if scheduleing parameters are not assigned to sm04 then how system allows in existing plants to create sm04 and why not in new plant 5000?*
    *Please help*

    Hi,
    Maintain schedule parameter BY T-CODE   OPU7
    Plant - 5000
    Order - sm04
    Prod scheduler -  *  (star)
    Scheduling Type - forward
    Automatic scheduling - Tickmark
    Kapil
    Edited by: Kapildev Farakte on Feb 2, 2010 3:08 PM

  • Errors CRM Service Order - ECC CO posting

    We have created a SAP CRM Service Order ( Copy of SRVO) transaction in CRM 7.0, on release of the service order we are getting the following error .
    An error occurred in system ZDEY240 during account assignment
    Message no. CRM_ORDER_MISC 060
    Diagnosis
    Errors occurred when assigning an account assignment object to a business transaction. To view the error message, see the accompanying log file.
    Transfer Log
    u2022     Errors in prerequisite object Transaction 8000000187 (Notification E IAOM 026)
    u2022     Profit center for CRM integration not found (Notification E KECRMPCA 001)
    u2022     Error occurred during determination of profit center (Notification E IAOM 039)
    u2022     Error occurred during creation of internal order (Notification E IAOM 018)
    If any one has a good idea on how to resolve this please let us know.
    Posted by Piyush Gandhi
    Mobile : 7176505770

    Hi Chetan
    Greetings
    Thanks for your email.
    Ref is made to the issue.
    I am aware of the CRM - ECC CO integration configuration , we have performed all the settings, I was refering to the error log in particular
    Which States:
    An error occurred in system ZDEY240 during account assignment
    Message no. CRM_ORDER_MISC 060
    Diagnosis
    Errors occurred when assigning an account assignment object to a business transaction. To view the error message, see the accompanying log file.
    Transfer Log
    u2022     Errors in prerequisite object Transaction 8000000187 (Notification E IAOM 026)
    u2022     Profit center for CRM integration not found (Notification E KECRMPCA 001)
    u2022     Error occurred during determination of profit center (Notification E IAOM 039)
    u2022     Error occurred during creation of internal order (Notification E IAOM 018)
    If you noticed there are serval log associated with this error , If any one know exactly what would be the reson which caused this error logs. We have checked all profit center , ecc service materials , Org Data config and found to be OK. Still the error persists.
    Need help to resolve this error.
    Regards
    Thanks
    Piyush Gandhi

  • Error in service order!

    Dear friends,
    In the service order, expected value and my line item value in the PO are getting added up. wat could be the reason and the possible solution?
    Regards

    Hi,
    These are the limits in the services.
    So the expected value means u r expecting the some value might be + or - ,so that system allows at the time of ML81N service acceptance.
    The actual value  , u already know the value of the order.
    Regards,
    Andra.

  • Error during Service Order creation

    Hi,
    I configure the Maintanance order for the plant and tried to create the Service ordeer for that Plant.
    But system shows the Following Error Massage,
        Field 'Additional Device Data' must still be filled
    Can anybody guide me to proceed further on this
    Thank You,
    With Best Regards,
    M.Suresh

    Hi,
    Thanks for your info PETEA.
    Sorry Paul Meehan , I didn't see the field settings in OIAN properly last time.
    There is a setting exist for field 'Additional data' as Mandatory. I removed this setting and tried to release the order and I succeeded.
    Thanks Paul Meehan and PETEA for your Information.
    M.Suresh

  • Unable to edit User Status in Service Order

    Hi Experts,
    There are several service orders with user status 'Open', whereas the system status is 'In Process'. The individual items are either set to Completed or are Released. I am unable to change the user status from 'Open', as there are no other options available in the dropdown list in edit mode. I even tried changing the status in CRMD_ORDER and was not able to do it. I checked the configuration for this and its perfectly fine. The status profile has been maintained properly.
       I tried using FM CRM_STATUS_CHANGE_EXTERN and CRM_STATUS_CHANGE_EXTERN_OW for this purpose and it still did not work. Any help/tips to resolve this will be highly appreciated.
    Thank you,
    Nanda

    Hi Nanda,
    As per your last reply, for some Service Orders you are unable to change the Status. Can you have check whether those service Orders are error free?
    Sometimes, when there are errors in service orders or in 1Orders you cannot change the status from In Process or Open even when you have released certain Items.
    Hope this helps.
    Thanks,
    Samantak.

  • Restriction of user status in service order for billing due list

    Dear CRM Experts,
    I have configured status profile for service order as OPEN,INPROCESS and Completed and have assigned this to the service order transaction type.
    Now once i save a service order without errors ,the system is automatically generating abilling document in  billing due list TX:BEA_DL_01 even though the user status assigned to it is OPEN ,INPROCESS AND COMPLETED.
    According to our client requirement ,a billing document has to be created in Billing due list if the User status assigned to it is COMPLETED only.
    Please suggest the solution.
    Bye,
    Madhav

    Hi Nanda,
    As per your last reply, for some Service Orders you are unable to change the Status. Can you have check whether those service Orders are error free?
    Sometimes, when there are errors in service orders or in 1Orders you cannot change the status from In Process or Open even when you have released certain Items.
    Hope this helps.
    Thanks,
    Samantak.

  • Error while processing sales order as factory calendar missing.

    "factory calendar missing or error in factory calendar".iam getting this error while processing sales order even though i have assigned it to shipping point and plant and sales org.

    Hi Malik, How are you? I'm sorry to trouble you,
                   Let me introduce, I'm Daniel, and I saw your fantastic asnwer in
    the topic "How to update Factory Calendar in SRM", and might I have the same
    problem. It's with the "factory calendar".
    In transaction va02 when I choose a Delivery Date, and I sent it to process, as
    a result in the "shipping tab" it calculated to the first item one date, and to
    the rest one date different.  I don't know What it happen?
    I debugged the program and I saw that to the first item use to calculate the
    date is the function  'APO_SCHEDULING', and to the rest item use
    'SD_SCHEDULING', and until here I come.
    How can I do to what the dates calculated are the same? or What would be the
    problem?
    I need the dates calculated are equal.
    I looked at it's using two "factory calendar" which are "J4" and "C2". Is this
    correct?
    Thanks In Advance,
    My best regards,

  • Factory Calendar issue in creation of Sales Order/ Delivery Order

    Hi all,
    There is one issue. Our user is not able to create Sales Order/ delivery order as he is getting the below error message u201CDate 2010-12-27 lies after the end of Factory calendar F1u201D. But when I checked the plant in customization, the Factory calendar assigned is u201CKRu201D and not u201CF1u201D. So I donu2019t understand why this error message is appearing. But when I checked Factory calendar u201CF1u201D, it was valid only up to 2010 and there are special rules also set. Only few days in the year are working days. Factory Calendar u201CF1u201D description says u201CKOR customers billed on the 25th of every monthu201D
    Please advice.
    Regards,
    Brijesh

    Dear
    If F1 is the correct calander , then goto OP03-Calander Maintenece -select the Holoiday Caleneder  and extende the Valaidity till 2020 and also Select the Factory Calander  do the same till 2020 .Now Goback to main screen of OP03-Plant asisngement -re-assing the same F1 calaneder .
    Secondly check the factory calender of the plant in OX10.Then in SPRO > enterprise structure >Definition > logistic execution>define shipping point .Select you shipping point and assgin the proper factory calender
    .Goto OVX5 , choose your sales organization, click on details, Detailed information tab - Sales Org Calendar (maintain your factory calendar here not Sale Org Calander )
    .Check in VOV8, use the "Propose delivery date" and "Lead time in Days" options to default today's date as the requested delivery date.
    Refer : Public holiday dates issue
    Regards
    JH

  • Error MSG '01/07/1900 date lies before start of factory calendar' in MD04

    Hi all,
    I have this error message when enter a particular material in MD04.  I know our factory calendar does not start in 1900, can anyone tell me how to clear this message?  I suspect there is a bogus data somewhere.  Can anyone help me how to fix it?
    Thanks,
    Lin-Lin

    Hi,
    For this particular material, there must be Orders which are created with this date.
    That is the reason, immediately after you input the material details an Press enter, in MD04 this  message will appaer.
    So, Check all the Orders (Better to check all the Receipts and Requiremnts as well) and Change the Date to current..
    One more information is this must be a for ecample a firmed Order like Production Order or a Firmed Planned Order etc..
    Check and revert for further discussion..
    Regards,
    Siva

  • Error: Factory Calendar Not In Buffer

    Hi all.
    I am rtrying transaction CO15 to confirm order, but it giving error RU017: Factory calendar not in buffer. Contact system administrator.
    I have checked all assignment, it is correct. factory calendar correctly assigned to plant. Can anyone help me...
    Thanks.

    Hi Puru,
    Check the release date of the production order and the date on which you are trying to confirm, see that there is a valid factory calender available for that day (Plant assignment or the factory calender assigned to the Workcenter of the operation you are trying to confirm)
    Hope this helps...Reward your points if so,
    Regards,
    Prasobh

Maybe you are looking for

  • Error while Applying patch KW70014

    Hi , I am facing the given error below while importing the patch KW70014.This is a BW patch .      The import was stopped, since an error occurred during the phase      IMPORT_PROPER, which the Support Package Manager is unable to resolve      withou

  • I've recently received an error message from Time Machine that my Macbook Pro's sparsebundle is in use.  What is this and what can I do about it?

    I've recently received an error message from Time Machine that my Macbook Pro's sparsebundle is in use.  What is this and what can I do about it?

  • Using JavaScript to search for dates in PDF

    Hello, I have a question about using JavaScript in Adobe Acrobat X Pro. I want a script that automatically search dates which fall within one week of the date of today. If this is true then the pdf file have to be deleted. If the date is later then o

  • AddWatermarkFromFile in  livecycle

    In "Converting Acrobat® JavaScript for Use in LiveCycle Designer Forms" it says that doc.addWatermarkFromFile() Works in Livecycle designer Does NOT have a livecycle designer equivalent Has a ---- for LiveCycle designer javascript Does this mean I ca

  • Personal Profile compile

    Hi all, I recently downloaded the cdc personal profile. I've managed to compile the profile on Red Hat 9 ( compiled cleanly...only some minor warnings ). When I try to run the HelloWorld example packaged within the democlasses.zip file ( should displ