Factory Calender and Holiday calender
Hai experts,
I am new in CRM. Can anyone tell me what is Factory calender and holiday calender in detail? And how to create it?
Anoop
Hi
this below blog will solve ur problem
How to create a new Factory Calendar in BI system
hope above solves ur issue
regards
prakhar
Similar Messages
-
Difference between Holiday Calender and Factory Calender
What is the difference between Holiday Calender and Factory Calender.
Holiday Calendars is used in Time and Payroll. It is Holiday Calender which is used in defining Work Schedules Rules for different regions.
In simple, we can say... it is defined for Employees.
Factory Calendar in turn in used in Shift Planning concept, T&E Mng, in defining/planning for Units.
In simple, we can say... it is defined at Unit(Area) Level.
Eg: Employee can be on holiday based on holiday calendar assigned to his area. But Factory may be running/open on the same day.
Regards
...Sadhu -
Days since Sales Order creation excluding holidays in factory calender
Hello,
Can anyone pls tell me the logic to retrieve the Days since Sales Order creation excluding the holidays in Swedish factory calender.
Current logic which we have thought of is
(The first succesful output - Order creation date)
But the result should exclude the Swedish Factory calender holidays (our client is from Sweden)
Now we need to establish the logic of fitting the factory calender into this whole issue. As we have to provide the logic to our ABAP er .
Waiting to hear from u all.......
Regards,
Anirban
SD ConsultantYour message is somewhat unclear to me.
When creating a sales order, a "Required Delivery Date" is needed.
This date is checked against the unloading calendar of the customer. If the system finds the requested delivery date = a non-working day of the customer calendar, it issues a warning (No goods accepted on DD.MM.YYYY. The next possible date is: DD.MM.YYYY (Message no. V1019). There does not seem to be any possibility of changing this warning to an error in the standard system; only possibility would be to modify the standard code.
If I have misterpreted your thread, then apologies, and feel free to elaborate on the issue some more. -
How to Transport Factory Calender to QTY and PRS systems
Hi All,
I had done a small change to Holiday calender in SCAL. I have read that it's not suggestive to transport it. Can any one let me know the procedure to transport the change to QTY and PRD systems.
The transport button is greyed out .
Best Regards,
SriThe following OSS Notes have also been checked.
356483 : Customizing: Current settings in the test system.
077430 : Customizing: Current settings .
328916 : Cust Changes despite "System cannot be changed" setting
Can any one provide an input on the procedure to move a factory calender - Individual entry..
Thanks in advance
Sri -
How to get past date based on duration and factory calender?
Hi All,
when i enter the duration ,i want to get the past date based on factory calender w.r.t current date
i.e if current date is 26th jun and duration is 10 , the past date should be 12th jun (which should exclude all holidays and weekends).
Thanks
VasumathiHi,
Please check this FM: I think this will resolve ur issue.
END_TIME_DETERMINE
Cheers,
Vijay. -
Activities happening on holidays even though th factory calender is maintai
hi all,
we are creating a sales document
the factory calender assigned to the plant and shipping point are 5 day week calenders
but the activities like loading date, goods issue date are falling on weekends i.e. saturday and sunday.
in the calender weekends are specified as holidays
thanks in advance for help.
hariniHi Harani,
check the assignment of factory calender to the Shipping point , sales organisation in enterprise structure ,
assign the relevant calender to get the correct dates
Hope this helps
Thanks
Akasha -
Factory Calender and Time Stream
Hi,
I Maintain a factory calender A
where monday to friday is working
and holiday on 1/1/2009
My Distribution centre is working 1/1/2009
How do i set up in APO?
thxMaintain Production calendar (For Factory) and Distribution calendar (For DC) using transaction
S_AP9_75000138 - Maintain Planning Calendar (Time Stream)
In calculation rule maintain 5 days as working day using calculation rule "Weekdays"
then go to bucket delete day 1/1/2009 if showing as working day in Production calendar and keep this day as working for Dist calendar.
Then go to Location master in Calendar tab
assign Production calendar for factory location and distribution calendar (in shipping and recving) for DC. -
Factory Calender and Planning Calenderr
Hi,
i want to plan my production for 7days a week. and want to plan for Raw materials also 7 days a week.
but here my requirement is that i dont want to receive raw materials on weekends. i mean no one will be in Factory to receive raw materials on Weekends.
If i maintain Planning Calender for 7 days and assign to Raw materials in MRP View 2 and Factory Calender for 5 days can i achieve this requirement?
for in house production i have to plan for 7 days a week. (Scheduling and Capacity Calculation)
i dont want to receive rawmaterils in weekends.
Please suggest.
Thanks
NagDear
Based on your business requirement , you should have the following set up :
1.One Factory Calender with Work Days Monday-to-Friday Let say FC1 .This will be used on all the organisational level starting from Materials Planning to Sales .But will not be assinge to Capacity Requirement Planning Purpose or Any Production Activity in Work Centre .
2.You should have one more Factory Calander with work Days Monday to Monday ( 7 days week ) with some special rule like Plan Shutdown Days , Breakdown Maintainnece etc and this should be assinged to all the work centres -CR02-Capacity Tab -Capacity Header -Factory Calader ID -Let say it is FC2.
You need to ceate Calander in OP03/SCAL .It does nto have any transport and it will be a Cleinet level changes which requires proper approval .Please rememeber , you need to assing only FC1 to Plant assingement in OP03 where as FC2 will be asisnged only in Work Centre level .
Steps : Goto -OP03
1.Identify all those Public Holidays frist with Fixed or moveable as per business requirement
2.Goto Holiday Calander -Hit the pencil -Hit Create option -Enter ID , Description , Valid To/From Year ( shd be 20 yrs differnce )
Add all those holidays as per Public holidays as applicable in your business with proper valididty and finally SAVE
3.Goto Factory Calander -Hit the pencil -Hit Create option -Enter ID , Description , Valid To/From Year ( shd be 20 yrs differnce )
Asisng Hioliday Calander . In case of FC2-Work centre Calander , here you can hit the Special Rules .Include Special Activity like Plan Shut down of factory with Validity etc and SAVE .
4.Come back to OP03 main screen -Assing the factory Calender in plant .
5.Goto -CR02-Capacity -Capacity Header -Available Capacity Header -Factory Calander-Assing FC2
I do not think you should have planning calander seperately if you do not have any specific reason .
Hope it helps
Regards
JH -
Set factory calender and user requirement date calculation
Hi Gurus,
I've requirement to do calculation for start user requirement & end user requirement. The calculation must exclude public holiday and weekend. Therefore factory calender need to be maintained.
Please guide me into doing this.
regards,Dear
Based on your business requirement , you should have the following set up :
1.One Factory Calender with Work Days Monday-to-Friday Let say FC1 .This will be used on all the organisational level starting from Materials Planning to Sales .But will not be assinge to Capacity Requirement Planning Purpose or Any Production Activity in Work Centre .
2.You should have one more Factory Calander with work Days Monday to Monday ( 7 days week ) with some special rule like Plan Shutdown Days , Breakdown Maintainnece etc and this should be assinged to all the work centres -CR02-Capacity Tab -Capacity Header -Factory Calader ID -Let say it is FC2.
You need to ceate Calander in OP03/SCAL .It does nto have any transport and it will be a Cleinet level changes which requires proper approval .Please rememeber , you need to assing only FC1 to Plant assingement in OP03 where as FC2 will be asisnged only in Work Centre level .
Steps : Goto -OP03
1.Identify all those Public Holidays frist with Fixed or moveable as per business requirement
2.Goto Holiday Calander -Hit the pencil -Hit Create option -Enter ID , Description , Valid To/From Year ( shd be 20 yrs differnce )
Add all those holidays as per Public holidays as applicable in your business with proper valididty and finally SAVE
3.Goto Factory Calander -Hit the pencil -Hit Create option -Enter ID , Description , Valid To/From Year ( shd be 20 yrs differnce )
Asisng Hioliday Calander . In case of FC2-Work centre Calander , here you can hit the Special Rules .Include Special Activity like Plan Shut down of factory with Validity etc and SAVE .
4.Come back to OP03 main screen -Assing the factory Calender in plant .
5.Goto -CR02-Capacity -Capacity Header -Available Capacity Header -Factory Calander-Assing FC2
I do not think you should have planning calander seperately if you do not have any specific reason .
Hope it helps
Regards
JH -
How to remove the Holiday calender from factory Calender
Hi All Good Morning,
I want to remove the Holiday calendar from Factory calendar,
I know the two ways to remove
1.Through request remove the Holiday calendar at DEV system, then move to production system.
Is there any impact on other calendar related settings If we move the request from DEV--> PROD System.
(My doubt is only changed settings will change or any other settings also get impact)
2.Directly change the settings through client open.
In this option we are able get the change option in Factory calendar at DEV and QAS systems but we are not able to get change option at PROD system.
Can any body help on this,which is the better way.
Regards,
Murali.Hi,
Many a times the holiday calendars are not in sync with DEV,QAS & PRD System,first check your system and see if they are in sync,
1-if they are in sync do changes in DEV and push request to PRD
2-if they are not in sync better do it on PRD Client,with help of your basis person,however before doing this kindly apprise your client of the same and then with his permission do it.
if HC are not in sync it may so happen that whatever is in DEV may get overwritten in QAS & PRD,hence check as suggested above and then do changes.
First remove(delete) HC from factory calendar and save
Salil -
Invalid factory calender error in creating subcontrating po
hello all,
during creation of subcontracting po,system shows the error message "invalid factory calender error".
i have checked the assignment in oy05.seems ok.
pls provide some input.
regards
sumit simran.Hi,
Please check the path.
IMG>Enterprise Structure>Definition>Logistics - General>Define, copy, delete, check plant-->Define Plant.
Here you can find the which factory calender is assigned to your plant.
Then go to Tcode SCAL , select the Holiday calender and edit it . Double click on your holiday calender and change it i.e valid From year to To year. Go back , select the factory calender and edit it , give valid From year to To year.
Thanks. -
How to define a new factory calender?
Hi guys,
I want to have a factory calender that I can use for scheduling batch jobs to run each last sunday in the month. Such factory calender doesn't seem to exist in the system and I'm wondering how I could create it?! Is there a transaction that I can use to create a new factory calender?
BR,
ArminHi,
1. In TCode: SCAL, initially check the public holidays existing in the system, whether those public holidays are sufficient or not, if not create your own public holidays.
2. Then Create public holiday calender and attach your public holidays to this public holiday calender.
3. Then create your own factory calender and attach your public holiday calender to the factory calender and select the working days in a week and then save.
The above are the steps involved in creating a new factory calender.
Hope this helps.
Thanks,
Viswanath -
Hi all,
Here goes a problem with factory calender in project systems.
The Project performed by the client are flexible. in some projects they work considering sunday as holiday and in some cases they work on sundays.
we have only one plant assigned to the projects which has only one factory calender assigned. e.g plant 1000 to factory calender F1(considering sunday as holiday)
when i create a new project if i change the factory calender at project definition to F2(considering sunday as working) and then if i go futher creating activities. system will still take the default factory calender assigned to plant i.e F1 and not F2.. the factory calender F2 can be seen in project definition, wbs element and activities.
but when i change dates at network header level and try to schedule.. system is considering factory calender F1.
can anyone pls tell me how to solve this problem.
thanks in advance,
stevePlease go to work centre --- capacity --- assign required calendar there.
As in the activity calendar will be picked up from work centre -
Create a plane with a own factory calender
Hi,
I would like to create a plan with our own factory calender. (spro-entreprise structure-definition-logistic general-define plan) Because we have some particular free days in the company the system already has some factory calender but we need our own one.How can I do
Thanks
DedeI' ve the result.
With the Code "SCAL" you have to create a public holiday. After that you can choise the holiday kalender and assign the public holiday you have created.
Thanks -
How to extend factory calender to a plant ?
Hi Ranga:
How to extend factory calender to a plant ? ( Tcode: SCAL, The calender is not client specific)
I check marked US factory calender, where after can you tell how to extend factory calender to plant
Note: I am using IDES ( International Demonstration & Education System)
ThanksHi Sandeep,
you need to use the following path
Go to SPRO>ENTERPRISE STRUCTURE->DEFINITION> LOG GENERAL>DEFINE COPY,DELETE AND CHECK PLANT>DEFINE PLANT
Here you need to assign the factory calendar. The assignment in work center will only applicable for capacity not for MRP and others.
<b>For information how to create a factory calendar</b>
Pl follow the steps
1.Go to SCAL transaction
2.there will be three options.
Click first public holidays and go in change mode.
Click create and create your holidays there and save.(Generally fixed date will be used in the pop up)
3.Now click Holiday calendar and go in change mode.
Click create and give holdiay cal id and description.
Click assign public holiday and add your holidays one by one and save
Now holiday cal is created.
4.Now come out and choose fact calendar and go in change mode
Click create and give Factory calendar id and description, and validity period.
Give the holiday calendar ID.
If you want to give special rule like any of the specific date/ day is the holiday or work day (which is different from holiday calendar you can define)
and save.
5.You have to assign factory calendar to PLANT
Go to SPRO>ENTERPRISE STRUCTURE->DEFINITION> LOG GENERAL>DEFINE COPY,DELETE AND CHECK PLANT>DEFINE PLANT
Choose your plant and go to details-
You have to define factory calendar there
Hope this will help you
Regards
Ranga
Maybe you are looking for
-
How i can make my swf file appear full screen?
Salam; I need to make my swf view as a full screen in all browsers, i need to add code in fla file, not in html page, can i make that? thanks for any help ...
-
ABAP Development in SRM....?
Experts can you pl tell... what is ABAP related development scope in SRM (Supplier Relationship Management)???
-
Dear users, my LabVIEW installation often hangs after common commands such as Save, Run, after creating variables (the label is draw directly, then after few seconds the variable and the wire is created), etc. LabVIEW 14.01f (32bit) Windows 7 64bit T
-
Hi all, I've installed OIM 11.1.1.5.0 with LDAPSync enabled. When I create a user using the OIM Admin console the user is created in OID. However, when I create a user in OID, the user does not get reconciled into OIM. I've manually run the "LDAP Use
-
Hi, I have downloaded itunes on windows 7,when I click the icon on my desktop nothing happens,does anyone know why itunes does not open?