Factory calender transport- not allowing

I have created a holiday calender and factory calender.
I have assigned the holiday calender to factory calender.
In the initial screen of factory calender, when i selected calender from the menu
the transport option is greyed out.
So i am not able to create transport request.
Please sdvice how to solve this?
Regards
Govindarajan

Hi,
Its related to authorization,check with BASIS guys,they will help you.
Refer this SAP note
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=86621
Hope it helps

Similar Messages

Factory calender transport

How to transport factory calender to PRD system from DEV.

Hi,
Go to SCAL transaction
Choose the function Calendar -> Transport, in the holiday and factory calendar initial screen to copy all the holiday and factory calendar data into a request.
Please pay attention to the information which you get when transporting the holiday and factory calendar
Transporting of Factory Calendar:
u2022 Changes to calendar data are not automatically included in a correction request.
Note: You cannot transport individual public holidays or calendars. You can only transport calendar data in its entirety. When you do this, all public holidays, public holiday and factory calendars existing in the target system are deleted.
u2022 All changes made to the holiday or factory calendar must be transported manually. The holiday and factory calendars' own transport connection should be used.
Hope it helps

Tinkpad W530 w. 32GB SSD and 5hhGB HHD. Factory setup does not allow installation on SSD

Hi
Today I've received a brand new W530 with 32 GB SSD and 500GB HHD from lenovo. I started to setup the system using the factory setup.... but I was not able to chose the disk to install the system. It only allows to install Win 7 Pro 64 Bit on HHD.
Also the Boot/Recovery Media Disk do not allow to select the disk (drop down list disabled).....
How to get the system onto the SSD instead of HHD?
Having the Win7 on the SSD was the motivation to buy the bundle from lenovo - expecting that the factory setup is ready supporting the SSD..........
Any help is welcome. Thanks in advance.
Rob

ThorsHammer wrote:
alphaman wrote:
I think you made a bit of a blunder ordering the 32GB SSD if you intend to use it for Windows.
A 256GB Samsung 830 would be what I would recommend and your 500GB in an ultrabay.
I totally agree with that point. The puny 32GB mSATA is designed to be used with the hokey caching Intel created.
Or with ExpressCache - there is a version for Lenovo notebooks if you look around

Transport for SCAL 'factory calender' or administer SCAL in prod system?

Hi togehther,
we could change the factory calender in the development system and afterwords transport this changes by using a transport request and STMS.
But our Consultants recommend not to transport these changes. They recommend to open the prod System with SCC4 to open status (Changes are allowed) and then make the changes in the prod system.
I think, this is the wrong way. How do you solve this probem?
Carsten Schulz
Teamlead SAP-Basis

Hi ,
You are consultants are right because SAP clear tells that "You cannot transport individual public holidays or calendars. You can only transport calendar data in its entirety. When you do this, all public holidays, public holiday and factory calendars existing in the target system are deleted".
As from your mail i understood that in development system,all users have access to to SCAL transaction,if some users have craeted or changed the factory calendar changes.all this changes get in to trnsport request which in turn affect the calendars in production system.
Thats Y in some industries,Consultants will do the changes through fire fighter ID directly in production or in some industries for development system SCAL authorization will not be given to all.so that as Juregn pointed development and production system will be in SYnc and you can do transport.
In this situation you can try one more option,after generating the transport request go to SE01 ,go to change mode and edit the request (double click on the request).
then go to obects tab you will see lot of tables related to factory calendar.check each tables in SE16 for the calendar you made the changes.if entries are there retain the table else delete the table.
If entries are there,then double click on the table,you will get the table key.in that put calendar id if there is only one entry,if more entries are ther e put calendar id suffix star.and save.
Check this solution first intest system and ensure whether it is trnsaporting only the particular changes

How to Transport Factory Calender to QTY and PRS systems

Hi All,
I had done a small change to Holiday calender in SCAL. I have read that it's not suggestive to transport it. Can any one let me know the procedure to transport the change to QTY and PRD systems.
The transport button is greyed out .
Best Regards,
Sri

The following OSS Notes have also been checked.
356483 : Customizing: Current settings in the test system.
077430 : Customizing: Current settings .
328916 : Cust Changes despite "System cannot be changed" setting
Can any one provide an input on the procedure to move a factory calender - Individual entry..
Thanks in advance
Sri

Date is not Defined in Factory Calender

Dear all,
We are facing some issue while releasing Process order. It states that Date is not defined in factory calender. and it throws out dates of for particular process order from 21.05.2014 to 15.07.2017.
Please check the attached screen shot & revert your thoughts.
Thanks in advance.

I have found the issue. Actually operation quantities in the phases in the recipe was maintained improperly. Hence the charge quantity was getting multiplied with huge number hence resources allocated to them was considering that huge amt of quantity to be processed on it. Hence dates were coming the ranges of period 2014.
Deep Dave.
However thanks for your all prompt response.

TS2755 restored ipod to factory settings, now imessage will not allow me to use my email address

I restored my daughters ipod to factory settings after she forgot her password. Now imessage is not allowing me to use her email address, and it tells me it is use on another device. Help!

Maybe here:
Sync Session Failed to Start iTouch iOS5: Apple Support Communities
iphone could not be synced sync session failed to start...: Apple Support Communities

All of a sudden my pad will not allow me to add events to my calender

All of a sudden my ipad will not allow me to events to my calender.

Have you tried a Reset of the iPad as described here...
http://support.apple.com/kb/ht1430
Also, have you had a look here Joining and troubleshooting Wi-Fi networks
From Here http://www.apple.com/support/ipad/wifi/

Lead time from catalog does not consider factory calender

Hi,
we are working with SRM 2.0 classic scenario. I have following problem:
We take over lead time from a supplier catalog via OCI in EBP. This works but the lead time does not consider holidays and weekends. How can I activate the Factory Calender?
Thanks Thomas

Hello,
I just sniff arround and found out that EBP 3.0 does not support factory calendar.
You should use BBP_DOC_CHECK_BADI or BADI BBP_CATALOG_TRANSFER and call within this BADI the function modules requesting the factory calendar data via RFC on the backend.
i.e.
get the target system of the follow-on document
    SELECT log_sys from BBP_DET_LOGSYS INTO wa_logsys-log_sys
    WHERE CATEGORY = ls_item-category.
    ENDSELECT.
read table T001WK
    CALL FUNCTION 'META_READ_TABLE'
      EXPORTING
        query_table    = 'T001W'
        logical_system = wa_logsys-log_sys
      TABLES
        options        = options
        fields         = fields
        data           = tabcont
      EXCEPTIONS
        OTHERS         = 1.
fill the internal table xt001w
    LOOP AT tabcont INTO la_tabcont.
      MOVE la_tabcont-content+3(4) TO la_xt001w-werks.
      MOVE la_tabcont-content+61(2) TO la_xt001w-fabkl.
      APPEND la_xt001w TO xt001w.
    ENDLOOP.
    SORT xt001w BY werks.
get the fabric calendar related to the plant
    READ TABLE xt001w INTO ma_XT001W
    with KEY werks = ls_item-BE_PLANT.
check if delivery date is a working day
    CALL FUNCTION 'DATE_CONVERT_TO_FACTORYDATE'
      DESTINATION wa_logsys-log_sys
      EXPORTING
        DATE                 = ls_item-DELIV_DATE
        FACTORY_CALENDAR_ID = ma_XT001W-fabkl
      IMPORTING
        WORKINGDAY_INDICATOR = W_IND.
get an error message if delivery date is not a working date
    IF W_IND = '+'.
CLEAR ls_message.
ls_message-msgty   = 'E'.
      ls_message-msgid   = 'ZBBP'.
      ls_message-msgno   = 'xxx'.
      ls_message-msgv1   = 'error message text, e.g. delivery date not
working date'.
      ls_message-item_guid = ls_item-guid. "assign message to item
      APPEND ls_message TO et_messages.
ENDIF.
endloop.

Sched.start date not allowing on week-ends for fwd scheduling process order

Hello Experts,
For a process order & scheduling typr forward/in time if I take sat or sunday as a start date then if I click on schedule, system changes it to previous workin day (friday). But however if i select backward/in time scheduling type & put week ends as finish day then system does not change this date.
How can I make system to allow schedule start date on week ends also for forward/in time scheduling type. in a factory calendor sat & sunday are holidays. while for work center, calender sat & sunday are marked as working days.
Thanks for advance,
Vijay.

Hi
it depends upon client requirement.you must have defined the holiday calender as well.if you select the public holidays in your factory calender.then system will allow you to do your daily transctions on public holidays as well and vice versa.so better go with all options selected .and plz check at your end
plz revert back if it works
Regards
Anupam Sharma

Consideration of factory calender in threshold values

Hi,
I need to consider the factory calender in the threshold values to check the due date of a task or a checklist item.
For example:
The task/or checklist item is due in 11 days (and the factory calender should be condsidered)
Does anybody know how to implement these checks in the threshold values of cprojects?
Thanks for your help!
Isabella

Dear Friend,
Ideally you should not change anything on Production server directly.
The normal & universally acceptable way is to transport the changes from Development or Quality to Production.
Still if you want to make changes on Production Server Directly (which even i dont recomend) you need to make Production Server in change mode thru T-Codes SCC4 & SE03 & make necessary changes.
Let me know if you need to know how to use T-Codes SCC4 & SE03.
Thanks,
Jignesh Mehta

Invalid Factory Calender error

Hello gurus,
While making a subcontracting PO, the following error is coming "Invalid factory error or error in the factory calender"
I have checked the plant settings & have put Factory calender IN for the plant. Still the error is coming. How to resolve this?
Regards
Prashant

>
prashantjalgi wrote:
> The validity is from 1996 to 2010.
>
> If I try to extend it to 2011, the system is not allowing.
>
> The same error is coming when the validity is 1996 to 2010.
Why is it not allowing? what error do you get when trying?
Calendar maintenance is done thru CUNI, and cusotmizing is usually done in development clients.

Invalid factory calender or error in factory calender

Hi,
invalid factory calender or error in factory calender 26.05.2008
I'm getting this error during STO in VL10B,
I've checked the fac. cal in t-code OX10 it is
K1 - genaral calendar for comp'y
But in shipping point of that plant Fac. calender is IN- India
Should i've to change fac. calender as k1 in shipping point of that plant.
whtr this can i directly change in production server or can i change in dev. server and transport the request to prod. (which is perferrible).
if this is not right, Kidly guide me the right way to resolve this

Hi
Please change the Factory calendar for the Shipping point in DEV & then transport the same to QA & PROD.
Thanks & Regards
Kishore

Error at the time change factory calender (scal) validity period

Dear Experts
When I tried to change the factory calender Valid period with t code scal Fr. Year 1996 to Year 2011, it probe me the message "Please enter validity area between years 1995 - 2010." and I wasn't allow to save.
Pls advise how to solve the above problem.
Thanks.
BK GAIKWAD

hi
your issue is clear that the factory or plant cllendar is defined for only 5 years 2005 to 2010
NOTE: pleaase contact your HR or FICO consultants for this issue & dont change any thing in PRD then you will be responsible for it
hope this clears your issue.
balajia

Customizinbg Adaptor Object to download the Factory Calender

Hi there,
can anybody help me with the download of the Factory Calender from oure R/3 to CRM 2005?
I'm searching for a Customizing Adaptor Object. Is that correct, or is there another way to synchronize the booth calendars?
The problem is, that in TR SMW01 I have an error in one bdoc which tells me that I have a problem with the fabric calendar.
Thanks a lot for your help
Greets christian

Dear Christian,
There is no download object to move the factory calendars from R/3 to
CRM. To have the correct description appear for your custom factory
calendar on CRM, you would have to manually recreate the entries in
table TFACD on the CRM system. The CRM IMG path is General Settings
-> Maintain Calendar.
Or you may transport acalendar data within a system landscape,
aplease check note 538344 and related notes.
Regards, Gerhard

Factory calender transport- not allowing

Similar Messages

Maybe you are looking for