Factory Default from Call Manager

I have a client which is private. They have many type phones that we need to change with new one. I want erase all information like call history, Itl files, tftp servers etc.
My first question is : What can I do to delete all these kind of information. My first idea is factory default? Can we make differently? 
Second question is : If we can success that with anyone's answer , Can we send this command to all 7841 ip phones from Call Manager 10.5.1?
Second question is important part of work. We must do approximately 500 phones which I need to change with new phones. I want to send this command from Call Manager?
Regards..

Just go the phones erase call history/network config/ITL files etc the settings you need to delete. I dont think there will be a bulk way to do some of the items.
But If you must erase everything from the phone, you will need to reset the phone to factory defaults.
There is no easy/bulk/remote way to factory reset the phones. You will need to do it from the phones itself by pressing the sequence of keys.
Still only possible way would be to setup a DEMO cucm and connect the CUCM/phones to an isolated 24/48 port switch/switches. Factory reset them and let them download the new firmware files from the demo system.
They will still have TFTP server defined in the end (of the DEMO server) and without which you cant get the phone to download the firmware.
-Terry
Please rate all helpful posts

Similar Messages

  • Call Records from Call Manager

    I am trying to figure out how I can get call records from Call Manager. I can get CR form our PBX but cannot figure out the Call Manager... Any ideas?
    Thanks,
    Dennis

    Hello
    There are 2 ways to get call record.
    Cisco has a built-in CDR Report Analysis. This application is accessable from the CallManager
    Go to Application, Install Plugin, install the CDR Reporting and Analysis plugin in CallManager. Then go to Servicability and go to Tools then select CDR Analysis and Reporting
    Default login is admin/admin
    2nd method is via SQL Server where there is a databae call CDR . You can customize a ASP page to retrive the data you want from there
    enjoy

  • Remove device and profile from call manager

    Is there any documentation on how to remove phones and EM, RDP, CSF profiles from call manager in order to free up some licensing??

    EM does not take any licenses, but the way you want to do this (assuming all associations are correct and dependencies would prevent you from doing it anyway):
    delete UDP
    delete CSF device
    delete RDP
    delete desk phone 

  • Devices unregistering from call manager.

    While looking in the event viewer of the pub, I noticed the dpa and pri had unregistered from call manager. I looked at the physical memory and noticed actually memory usage is 98%. Could this be the cause of the devices unregistering constantly?
    Thanks in advance,
    MP.

    Is the CCM heartbeat incrementing? High memory usage could have caused the devices to unregister too. What is the reason for high memory usage? Have you tried rebooting the devices?

  • Reset WLC Module to factory defaults from router cli

    I have a wireless lan controller module in a 2811 router that has a previous config and need to reset it to factory defaults from the router cli.  Every time I try a "service-module wlan-controller 1/0 reset" I don't see any output on the screen indicating the boot process that would allow me to interrupt it and reset a password.
    I tried following this doc but had no luck:
    https://supportforums.cisco.com/docs/DOC-3668
    Anyone have any experience with this?

    Hi Joe,
    Not sure, but this doc does list a couple of different steps
    http://www.cisco.com/en/US/products/ps6308/products_password_recovery09186a008071faa7.shtml#topic1
    Cheers!
    Rob

  • Running scripted queries to get performance stats from call manager

    Is it possible to do the above? or does the AXL interface only deal with Call Manager functions, not the underlying operating system? or is there a way to talk direct to the server operating system (MCS)?
    Hope you can help
    Paul                  

    Thanks. I've done this for my proxy-retrieve function and now get the following
    Performance Counters:
    Average Total Percent
    Total number of requests: 134
    Request processing time: 2.0625 276.3740
    proxy-bucket (Proxied requests)
    Number of Requests: 132 ( 98.51%)
    Number of Invocations: 132 ( 4.71%)
    Latency: 0.0000 0.0000 ( 0.00%)
    Function Processing Time: 2.0064 264.8450 ( 95.83%)
    Total Response Time: 2.0064 264.8450 ( 95.83%)
    default-bucket (Default bucket)
    Number of Requests: 134 (100.00%)
    Number of Invocations: 2669 ( 95.29%)
    Latency: 0.0002 0.0280 ( 0.01%)
    Function Processing Time: 0.0858 11.5010 ( 4.16%)
    Total Response Time: 0.0860 11.5290 ( 4.17%)
    Am I correct in saying that ~95% of total processing time is spent in that proxy-bucket (proxy-retrieve function)?
    Does anyone know if the time in proxy-retrieve is the total time from start of function to last byte of response back from origin-server? I'd just like to know exactly what this time involves.

  • What are the essentials needed before upgrading from call manager 9.1.1 to call manager 9.1.2?

    I recently tried to upgrade my call manager in a lab environment from 9.1.1 to 9.1.2 but failed. The error stated that connection had been lost after 2 hours into it. Connect using CLI. Any help would be greatly appreciated.
    Steve

    You mean via GUI??
    What does the upgrade status via CLI says??

  • Printing from call manager

    I like to print the help screens and also print the screen displays while in Call Manager. The network engineer did not recommend this. We tried it anyway - we added a driver and defined a printer but sometimes it would cause the IExplorer to spike the CPU up to 100 percent. Any suggestions on how to print?

    Not sure why you need to be on the server it self to do screen captures. Everything is doen through the Web interface.
    From your desktop, load a program that captures screen shots. I use "screenhunter" I can press F6, crop the picture and save it and one click to a designated folder. I have created a couple docs for my clients this way, not having to be on the server at all.
    Remember, the console at the server for CCM, you should hardly ever have to log into for day to day administration. Everything is done through IE at your own computer.
    Loading other software, print drivers, etc onto CCM is probably not supported by TAC anyways.

  • How to extract 911 report from Call Manager

    Hi, It has been requested I provide a report showing only 911's and where they are originating. Does Call Manager have a utility I can use to extract this data?
    Thanks to all in advance, it is greatly appreciated.

    Hi Ross,
    This is the only method that I know of to do this type of search (in CCM);
    Using SQL Queries to Search the Call Detail Record with Cisco CallManager
    Search for Calls Made to a Specific Number
    In some situations, you might need to find out the extension which called 911 on a specific date. Complete these steps in order to search for calls made to a specific number such as 911.
    In order to search for calls that are made to a specific number, you can run a different query.
    For example, if you want to look for calls to 911 you can enter the query select * from CallDetailRecord where finalcalledpartynumber='911'.
    The bottom of the page displays all the entries in the CDR that have the final called party number equal to 911.
    Add a date to this query in order to refine it.
    For example, for all calls to 911 after August 1st, 2003, run the query select * from CallDetailRecord where finalcalledpartynumber='911' and datetimeconnect > '1059696000'.
    The bottom of the page displays all the entries in the CDR that have the final called party number equal to 911 made after August 1st, 2003. '1059696000' is the universal time in seconds for August 1st, 2003.
    In order to see who calls 911, run the query select callingpartynumber from CallDetailRecord where finalcalledpartynumber='911'.
    From this doc;
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801d71c5.shtml
    Hope this helps!
    Rob
    Please remember to rate helpful posts.....

  • Phones getting unregistered frequently from call Manager

    Hi
    We have Call manager in our HQ and some phones in Branch in a different country. From CUCM there is a SIP trunk towards router in branch.
    Users in branch occassionally complain of phones getting unregistered.HQ and branch are connected through internet with suffiecient BQ 14 Mbps on each side.
    Thanks for helping me out.
    Regards
    Vibha

    Hi Vibha,
    You can check the Phone status messages to start with and also check the app / syslogs on the cucm corresponding to the time stamp when they are unregistered to see the reason code for the unregistered event. However, a packet capture would be ideal to check what exactly is causing the issue as we can see which packets are exchanged or getting dropped between cucm and IP phone.
    HTH
    Manish

  • Migrating from Call Manager 8.5.1 to HCS

    moving to HCS and apparently there is no configuration migration utility so the vendor has to type it all in. That seems strange to me so I am asking if any has ever heard of a way to get my Call Manager & Unity 8.5.1 configuration into HCS without having to type it all in again ?

    No problem.  HCS typically uses VOSS for multi-customer CUCM management, and that tool accepts data in Excel format.  Just perform a BAT Export on your CUCM and Unity information and send it on, and the vendor can manipulate the data as needed without retyping.  I've done some HCS projects, and I depended on the Excel data and BAT for importing customer information.
    GL!
    -chris

  • Upgrading call manager from version 8 to 9

    Hi All
    Can anyone please tell me the summary steps on what I need to do to go from call manager version 8 to version 9?
    many thanks
    Carl

    The answer to your question, is that they entirely depend on you exact CUCM versions, asking here and just saying "8 "does not work. You will need to do your due diligence, and read:
    A) Upgrade guide for your target version
    B) Release Notes
    C) New and changed doc, if not included in the RNs already
    They will provide you with ALL you need to perform the upgrade, pre-reqs, procedure, and post-upgrade changes to the VM. All the information is available on cisco.com under the CUCM main documentation site.
    Once you've been thru those, you can come back with any further questions.

  • C855-S5190 restored via recovery to factory defaults, ran the Toshiba updater, no Windows Update

    I'm desperately searching for help!  My elderly father has a C855-S5190 and after trying the update to Windows 8.1 from the store, the laptop doesn't boot all the way up - kept giving various errors.  So, he dropped if off for me to try to fix.  I couldn't get around it so I did the restore to factory defaults from the restore disks.
    After that all finished, I tried the Toshiba service station and it gave me about 7 updates that I installed.  After that, I rebooted and then wanted to see about doing the Windows 8.1 update.  Went to Windows Store - it says I need to do Windows Updates.  I went to search, and now there's no Windows Update showing anywhere.  I checked settings, and everything is empty under there as well.  What happened??
    If someone could tell me how I can possibly do the Windows Updates.  I tried this once before trying the service center, the updates either fail, or they install, then it reboots, can't configure them, and gets stuck in a loop of trying to roll things back.  That caused me to have to do another restore to factory defaults - I've had to do it 4 times so far, and I just don't want to get stuck in that loop again.  So, I need to know what happened to my Windows Update, how do I get it back, and how the heck do I get this thing updated to 8.1?
    I booted a Linux live media before starting and was able to recover the files, etc., he had on it to a USB flash drive since I knew doing the restore would wipe that all out.
    Any and all input is GREATLE appreciated!!
    Dave

    Here's the link to the Microsoft page,  I had to do this to get Windows Update to run.  The Windows 8.1 upgrade would not let me do the upgrade until Windows Update was run, and I kept getting this error.  It takes a *long* time for this to straighten out if you've done a factory defaults restore - several reboots, etc..
    http://support.microsoft.com/kb/949358

  • Cisco Call Manager - No all phones uses License

    Hi Community.
    I've upgraded from Call Manager 8.0 to 9.1. I did the License Count Utility Report and the License request from ELM.
    Cisco sent me then afterwards the license, I've installed the license and all done.
    But as you see on the print screen only few devices uses a license. Why?
    Best Regards Patrick

    Hi Patrick,
    From the ELM snapshot, there is no Unused license. This means all licenses are  being consumed.
    Can u please click on View Usage report on Unassigned devices in CUCM is first attachment shared by you and check how licenses are being used?
    rgeds,
    aman

  • Snmp traps with Call Manager 4.13

    Anyone being able to get snmp traps from Call Manager 4.13 to work. I can walk the MIB and get snmp cold start traps but no Call Manager specific traps

    There is a possibility that the CCM service controls this trap and thus cannot send a trap until it is up. This is an issue seen in many devices not just CCM. CCM supports only certain traps.Refer the following URL for more information
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00803f52e1.html#wp1041935

Maybe you are looking for

  • How to get checked parameters in a servlets or Action's?

    i am using a for loop for creating Checkboxes in my JSP and i am finding it difficult to get the set of checked values into my next servlet or jsp i.e. to which ever my request is forwarded.. the logic i used in my jsp for creating my Check boxes is

  • How to use DATETIME parameters in stored procedure?

    I can not define a variable or parameters with data type of DATETIME when I define stored procedure using Developer/2000. Does Oracle not support DATETIME? null

  • How do I create a DVD I can watch on TV from an Iphone5 Video

    My operating system is OSX Mavericks 10.9.4.  After is download IPHONE 5 videos.  How do I make a DVD that can be watched on a regular TV.  I might add that I'm somewhat a novice.

  • Realm does not work

    hi, i do have a problem with the "realm" funktion in SL Server. I want to have an accsess control for my wiki. So i set everyone access none an add some user. Testing it, i found out, that this "Realm" funktion doese not work. Looking into the list o

  • After sharing IMovie with Quicktime I can't get it to download with IDisk

    I am completely frustrated. I have attempted to share with homepage from IMovie also with Quicktime to IDisk. I have a .Mac account. I just keep getting a copying format that continues and never stops.