Factory reset after power off

I use Cisco switch sg300-28. When i turn it off and turn on, it reset to factory reset include login password, dose it normal operation or I miss anything?
Thank you.
Sent from Cisco Technical Support iPad App

Hello Jerry, the SX300 series switches have a running configuration and a start up configuration. For the switch to retain settings, you must save the running config to the startup otherwise all settings will be lost.
After making a change there is a blinking save icon on the top right. You may click this and follow the windows. In addition, you can go to Admin -> File Managemenet -> Copy File and save there as well.

Similar Messages

Linksys SGE2010P resets after power off

Hello,
i got a linksys SGE2010P and when i configure it and save it works fine but after a power off the settings are back to default. someone an idea ?
Rensk,
Solved!
Go to Solution.

i used to have the same problem in my SFE2000 until I have learned that you need to do the following steps to permanently save your settings
go to Admin > File Management > Copy Files
click on Copy Configuration button
set Source File Name as Running Config
set Destination File Name as Startup Config
click Apply

Iphone resets after power off

My iPhone ran out of battery and it asks to reconfigure the phone when I turned it on after recharging. I tried resetting however it didn't work.

Hi Umbriel,
Thanks for you tip. I restored the iPhone and at first everything was ok. Now my iPhone ran out of battery again, and AGAIN the date/time is reset. This *****! Can I somehow submit this as a bug so that it will hopefully be fixed with the next IOS release?
Kind regards,
Nora

C871 default config after power off - bad nvram?

Hello,
I have new C871 with default configuration. after reconfiguring and reload, my config is loaded from nvram. But after power off, is there default configuration. What's wrong? config register is set to 0x2102 (that's ok).
any ideas?
thanks, 
martin

I found the reason - construction 'bug'. reset button was always presset.

IPad WEP password required after power off.

Hi,
On my ipad mini I am required to re-enter my WEP password after power off.
Why is this and how do I prevent it from happening?
This does not occur on my mbp or iphone 4s.
Thanks,
Rob.

Although it should work flawlessly, for some reason mobile devices don't always play nice with WEP. You're far better off with WPA2 (security-wise) anyway. If you have the ability to change your network's security, it might be easier to just get away from WEP than to try to make your mini work with it.

HT4623 Hello! Answer Why do not open pictures after power-off at iphone 3? Thank you!

Hello! Answer Why do not open pictures after power-off at iphone 3G? Thank you!

This problem is already two years.

Bios 3.40 - CMOS Reset needed after power off

I recently upgraded my 875P FISR2 board to the latest bios cause I hade some problems with my NIC. Everything works fine except when I power off the PC by the button or on the PSU the computer won't boot until i make a CMOS reset and redo all my settings.
Anyone else had these problems or something similar?
/M

Try increasing the DDR Voltage to 2.7v~2.8v and maybe borrow a more powerful PSU like Antec 430w with stronger rails to test the system out.
The current PSU is just at the entry level for your power hunger system though it may do just good also.
You may also want to use Memtest86 to test your RAMs health and for errors.
Lastly, I would like to know if you've done any changes in BIOS before your flash to the current one, if you did change some parameters before, I would recommend you to re-check your current BIOS settings and set to the parameters that you have done for the previous BIOS.

Lumia 625 wont start after power off!

I bought a lumia 625 5 months ago and it worked fine. but recently when i switch off power it wont turn back on. So i had do keep it in air plane mode at night. After like one hour it switches on back. I tried resetting and restarting. Phone only vibrates after i release power key ( in all resetting methods), but does not show anything in the display. How can i fix this. help would be appreciated

I'm going to suggest a hard reset of the phone. Do a backup first, then either go to Settings/About and select Reset my Phone, or for the 625:
Warning! All data will be lost!
1.Power off your phone
2.Press power button and after phone vibrates once press volume down until you will see exclamation sign on the screen
3.Press in this order:volume up
volume down
power
volume down
4.Wait until format ends and the phone restarts
I'm thinking that something with the sleep mode has gotten corrupted in memory. If this doesn't clear the problem, then you likely have a hardware/firmware fault and the phone should be taken in for repair or replacement.
/drt

Ipad 2 is stuck in soft reset cant power off and not recogized in itunes

After deleting the Facebook app i did a soft reset on my ipad 2 and now it is stuck on the black apple screen. ipad will not power off and i have it plugged up to itunes and still nothing. Attempted multiple soft resets again. Please help.

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Bad vi after power off

sometimes LV can't open VI if system crushed (power off) when this VI is opened by LV
this trouble appear not every time.
I had experimented with this trouble and not found any rule (about dozen attempts and no problem with vi)
But yesterday I was on customer object and system crushed (power off) twice. After second crush I had found that can't open main VI (attached).
This error was in LV6 (my first version), in LV7 fnd now in LV8 (8.3)
I'm not sure, but may by bad file is smaller than correct file (from backup).
Why this happen and how can I avoid this error?
Attachments:
data_processing.vi ‏231 KB

Hi Artem,
I would not call it a LV-error when you switch-off (or crash) your pc while working... How should LV prevent from crashing?
There is no other answer than 'save early and often'! And starting from LV8 there is an auto-save option similar to MS Office (save every x mins)!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Cannot establish wireless connection with WRT54G after power-off

My WRT54G (firmware v7.00.0) is connected to cable TV modem and
usually the wireless connection works fine, but after swiching off and later
on the power to WRT54G a laptop cannot establish WiFi connection to internet.
I can see in Odyssey software (for wireless communication) that my laptop
found the right network (SSID) but in status it says 'waiting for keys'.
I use WPA2 (TKIP). The laptop does not connect to internet.
When I connect it by cable (ethernet) the internet works fine, I have noticed
that by accessing the web-page utility of the router and simply clicking
save changes on wireless-settings page (without making any changes in
the settings) my laptop instantly establishes wireles connection and
everything works fine till next power swich-off.

Thanks for reply! I have my network in preffered, and the software/laptop locks on
the network (see it, says it have excellent signal strenght) and gives note
'waiting for keys' (the WPA2 encription key is in the settings - both of router and laptop client - Odyssey).
I've got firmware ver.7 so it is probably the latest.

Reset vs Power Off

Holding the sleep/wake down will power off the iPhone.
Does turning it on from this power off state reset the phone?
In other words, does this do the same as reset as when the home and sleep/wake buttons are held?

No it doesn't. Holding the sleep/wake button down, and then sliding the red slide does power off the phone, in a sense. Actually what it does is put it into somewhat of a sleep mode, like a computer. The reset can only be performed by holding down the Home and sleep/wake button together through the power off screen and to the Apple logo screen.
Hope this answers your question.

E1000 won't reboot after power off

I have an E1000 installed. When I'm away for a while, I turn the power off to my modem and router to reduce electicity use. When I turn the power back on after returning, the E1000 will not reboot automatically. It will only reboot after I physically remove the power adapter cord from the E1000 body and reinsert it. Why doesn't it reboot automatically?

While turning on the devices, turn on the modem first. Wait for 1 minute and then turn on the router.
The router should reboot automatically when you turn it ON. However your router is not doing it automatically.

Reconfig required after power off

A week ago I changed my previous router by a new WRT54G. Old problems are gone, but unfortunately I got a new problem:
Each time the router is restarted (power off), I'm no longer able to connectwireless (Authorization, using WPA2 personal).
It needs always a wired connection first, then connect to the router setup:
Wireless - Wireless Security - Save Settings (without change). It looks like some settings are not saved correctly!!
Any help is highly appreciated.

Return the router. The new WRT54G hardware versions (v5, v6, v7, v8) are known for their various issues they have. Replace it with a WRT54GL which is the old hardware platform they have used for the first versions which work far more reliable.

Resume music playlist after power off?

Just graduated from a 3G iPod to a 32gb 2nd gen iTouch. On my old iPod, I could listen to a playlist, power off in the middle, and the iPod would resume playback from that exact point.
This isn't happening with the iTouch.
Am I missing a setting? I've seen the threads about "resume playback" checkbox in iTunes, but that doesn's seem to work for related iTouch questions...
thx
barry

This is how the Zen operates, more or less. Under the current firmware, your place will be saved if you turned the Zen off for less than about an hour or two. This is because the Zen goes into a "sleep" mode. You can tell the Zen was in sleep mode if, when you turn it on, all you see is "Zen" and the player turns on in a second or two.
If the Zen has been off for more than an hour or two, it turns off completely. You can tell this because the screen shows "Creative", then "Zen", and takes about 5-7 seconds to boot up. In this case, the Zen will lose your place.
I agree that this is far from ideal, to say the least. I find myself having to navigate back to the right folder to get to the next track in my audio book all the time.
I understand that things were different with earlier firmwares, before they had the "sleep" mode. Hopefully they can fix this problem in a future firmware release.

Factory reset after power off

Similar Messages

Maybe you are looking for