Factory reset iphone 4s / windows 7 does not recognize my iphone 4s
factory reset iphone 4s / windows 7 does not recognize my iphone 4s
Setting > General > Reset > Erase All Content and Settings.
Read here for help with iTunes and the device http://support.apple.com/kb/TS1538
Similar Messages
-
My new Dell PC running Windows 8 does not recognize my iPad or iPhone. Worked OK for iPhone for months but would not work for new iPad. I removed /relaoded iTunes and now it won't recognize either iPad or iPhone. Got any suggestions?
Hi there Lizabethfromaz,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W. -
Windows 8 does not recognize ipod nano anymore
Windows 8 does not recognize my iPod nano anymore
Did so in the past
Followed all troubleshooting tips on Apple's page
Any other suggestionsHi there catfish1967,
You may find the troubleshooting steps in the article below helpful.
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
-Griff W. -
Why windows 8 does not recognize ipod touch model A1367 4th Generation?
Why window 8 does not recognize ipod touch model A1367 4th generation? and of course iTunes either.
See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
(it applies to win 8)
Run this to help if it identifies the cause
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem? -
Windows 7 does not recognize ipod 6th gen nano
Windows 7 does not recognize my device so I can't sync to iTunes. I tried running MSCONFIG, reinstalling iTunes and various different cables, usb ports. Any other suggestions?
Does the iPod appear in Device Manager when it is connected?
To access device manager, click Start and then right->click on Computer and choose Manage.
It might be listed as unknown or under the USB host controllers section.
B-rock -
Windows 7 does not recognize my iphone
My iPhone 4 is not recognized by my Windows 7 laptop. iTunes on this PC recognizes it okay, but Windows 7 does not see it as a camera. On my old WinXP machine, it is recognized with no problem.
Did you check the camera notification?
Maybe you'll need to enable it again and reverse the process described in this article:
iOS: Disabling digital camera notification in Windows -
Stop telling everyone to do a factory reset...It's like Obama reading off a teleprompter for every word he says! Get a new script for your customer service call center and delete the factory reset verbiage. IT DOES NOT WORK.....PERIOD!
randallg wrote:
Stop telling everyone to do a factory reset...It's like Obama reading off a teleprompter for every word he says! Get a new script for your customer service call center and delete the factory reset verbiage. IT DOES NOT WORK.....PERIOD!
I do believe for some problems a Factory Reset is the right answer, but not when it comes to missed calls/text messages. -
Windows 7 does not recognize ipod
My iPod classic is not recognized in windows 7 (new PC). I can see my iTunes and all the music on line, however, I cannot synch any new music as the PC does not recognize my iPod. I have tried all the help FAQs that are on-line.
Does the iPod appear in Device Manager when it is connected?
To access device manager, click Start and then right->click on Computer and choose Manage.
It might be listed as unknown or under the USB host controllers section.
B-rock -
My windows 7 does not recognize my ipod touch 64gb 4th gen.
My windows 7 os does not recognize my 64 gb ipod touch 4th gen. Why not? Please help me!!!!!!!
Did you do this as I suggested in my first reply?
See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Run this to help if it identifies the cause
iTunes for Windows: Device Sync Tests -
Windows & iTunes Does Not Recognize iPhone 4 But It Charges?
I have an iPhone 4 16 GB Factory Unlocked. Yesterday it was fully working. I don't know why, today, my PC doesn't recognize it, even as an camera. I don't see Apple Mobile Device USB Driver listed in the device manager. Tried several programs concerned with iPhone, but no luck.
Uninstalled everything related Apple like iTunes, Bonjour, Apple Application Support etc., and used a program called "ByeTunes". Reinstalled iTunes but it does not work. I tried plugging it to my laptop, still doesn't work.
Also, I'm using Windows 7 x64, and re-installed Apple Mobile Device Support for 64-bit several times. It didn't work.
However my phone charges, does not beep that plugging sound or show charging indicator but the battery level increases, when I plug it to my computer. But when I try to charge with firewire it works.
And last, my PC can recognize my phone in DFU mode, fortunately. But I'm afraid of being stucked at restoring process.
What should I do?
Thanks.I am facing the same issue. Tried everything like, Reinstall Itunes, Tries the sync on 3 diffrent laptops with windoes 7, XP and vista, Connecting in restore mode, DFU, Apple mobile devices restarted..nothing has worked. I am not sure if i do "erase all setting and content" will help because if the i tunes cant recognise the i phone now, then after erasing everything will it recognise to restore??
Can any 1 help if i do " erase all setting and content" will help and will itunes recognise the iphone then? -
The iPhone 3G does not show up in My Computer, but syncs OK with iTunes, no problem. I need to back up my photos on the iPhone!! Any help appreciated. Thanks!
When I connect my iPhone to a PC running Windows XP just to charge it, the scanner and camera wizard launches automatically prompting me what to do about importing the photos in the Camera Roll. I don't recall having to add my iPhone as a camera first. The scanner and camera wizard detected my iPhone as a camera automatically which it should do without having to do anything extra first - as long as there are photos in the Camera Roll.
http://support.apple.com/kb/TS3195 -
My Windows computer does not recognize my iPhone.
Hello. When I plug my iPhone into my laptop (Windows Vista) the iPhone does not appear in "My Computer." It does sync with iTunes. I searched around and apparently the fix is to delete and reinstall iTunes. Will I lose all of my music when I delete iTunes? What about videos, popcasts, etc?
Thanks.First try the troubleshooting steps here:
iOS: Device not recognized in iTunes for Windows
Uninstalling iTunes will not cause you to lose any music. -
I have updated iphone 4 to iOS 6 now itunes 10.7 on windows 7 does not recognize it
Hi I have updated iphone 4 to iOS 6 and also updated itunes to 10.7, now when I connect my device via usb it does not appear in itunes. I have followed all the advice in troubleshooter including uninstalling and reinstalling itunes but it still doesn't appear. Please can anyone help with this? I am not really very tech minded so a simple solution would help!! thankyou
Thank you. I ended up performing the Restore after I did an Update, and performing the restore solved the problem----I now have a functioning iPhone with all of my data, pics, and apps on it. Fortunately I made sure that I backed up my iPhone before I tried to update to iOS6. Man, what a headache though, and it sounds like I had it easy compared to some other horror stories I've read. I won't update my iOS on my iPhone again; i've learned my lesson. It remains to be seen whether iOS6 will be worth it :-)
-
Windows 7 Does Not Recognize New Cartridges in C5180
Well, the subject just about says it all. I installed three new cartridges in my C5180. The display on the printer shows that all of the cartridges that I installed are full. The printer report shows that the cartridges were installed today and showed the ink expire date to be nearly 2 years down the road. Everything looks good as far as I can tell.
Except, Windows 7 says that I need to install 2 of the cartridges out of the 3 I installed. My choice is to print Black Only or not print at all. The funny thing is, I can choose Black Only and my color print out prints. The message is extremely annoying.
Any help? I tried to reset the printer by removing the ink cartridges with the printer on, unplugging the power, and then powering on with the power and help pressed down (which is very hard to do if not impossible alone on this printer). I then powered back on normally and installed the cartridges again. This is still fine for the printer but does not affect Win7.
What else can I do?
Thanks.Nevermind. I removed the device, turned the power off and back on to let Windows reinstall the device. That made the problem go away. I should have tried that first.
-
The ac adapter works, and the battery remains at 100%, but the icon never switches from battery to AC. The laptop will not turn on without the battery and just AC, yet the adapter keeps the battery charged at 100%. Windows 7 will not perform some of the updates when it thinks it is running on battery.
Any ideas?I am having the same issue with my G61. I apologize in advance for hi jacking your post and leaving such a long reply but maybe it will help both of us in the long run.
The problem started off by everyonce in a while my battery icon showing my battery needed replaced. I ran the battery tool and it said the battery was bad. I eventually replaced the battery to no avail. Here is everything that I have done and noted while dealing with this problem. After replacing the battery the battery tool would not run saying that in order for the test to work the AC adapter needs to be plugged in (computer will only work with the AC adapter plugged in). If I am using the computer and the adapter happens to come unplugged it almost instantly goes into a permenant sleep and I have to hard reset and plug the adapter back in in order to use the laptop.
The icon at the bottom of the screen does not show the battery charging. It only shows the battery in good standing and its current power level. If I remove the battery it changes to no battery present.
Some wierd things that are going on are the computer will boot up on battery power alone but as soon as windows is loading at the desktop it will go back into permenant sleep and will have to hard reset. Also the computer will not power on with the battery removed and the AC adapter plugged in but all my power indicators are lit up showing its getting power.
I just recently upgraded to Windows 7 Ultimate and performed all the updates thinking that maybe that would fix the problem. But it did not. Although now when I run the battery tool it does not tell me to plug in the AC adapter. It goes through the process and tell me that everyting is OK and my battery checks out fine.
One thing that gives me hope that its a software issue is that I have no issue using the battery when running Windows in any version of SAFE MODE. I can run it till the battery dies without it going into permenant sleep.
I have read that it could be a motherboard issue but not sure how to verify. Any help to help us figure this out would be fantabulous.
Maybe you are looking for
-
Problem while submitting job from Forms
Hi, i'm submitting a job in when button pressed trigger. This job will call a Backend Package(one procedure). But the job id is created in the backend but the job is not running. but if i run the job with DBMS_job.Run(jobid) from form itself after su
-
A second issue - no free space on server, possibly hacked?
On Monday morning, 4/30/2007, I came in to discover the last 80 GB left on our server was filled with 0 GB of free space. All the space had been taken up by a file/directory somewhere in one of the root folders (/etc, /var, etc). I never found out wh
-
Trying 2 download new version of Firefox and after being prompted 2 drag Firefox icon into Applications folder, get message that task can't b completed bc Firefox is in use, but only use am making of Firefox is 2 have it open 2 download new version
-
I have a scenario where I need to send(SFTP) some files to the external sources. Does XI have a FTP server installed in Integration Engine? or I need to set-up a separate FTP server and mention the IP/login etc of that FTP server in receiver FTP adap
-
Anyone else notice the puny list of CS5 compatible VTRs?
Seriously - 13 models and only 2 that do SD. Earth to Adobe - there is a huge chunk of television distribution being done in SD in the real world. I live in the third largest DMA and only half the broadcasters that can get to all 5 million viewers