Factory settings recovery failure
I have Hp Envy14. I don't have the recovery disc. My notebook crashed and i tried to recover from the hard drive but it didn't work. But the partition where the recovery image is still intact. NEED HELP!!
Any error codes, what happened when you attempted recovery?
Test the hard drive then the memory modules, post back any errors.
http://h30434.www3.hp.com/t5/Notebook-Lockups-Freezes-Hangs/How-to-test-RAM-and-HDD-Hard-Drive/td-p/...
Similar Messages
-
Windows 10 Factory Settings/Recovery Partion Question
I have a question, I upgraded my Aspire E 17 laptop to Windows 10 2 days ago. would there be a way to put my computer back to factory settings with the Acer Recovery Management no longer working. And I noticed that i have a recovery partion that is 14 GB, Would that be Window 10 in the recovery partion or Window 8.1 in that Partion
Hi BookHog92, With regards to the Acer recovery Management, you don't have to worry about it if it's not installed in your laptop or it doesn't like to work anymore; because you still can use the manual option to restart your laptop/computer to the Factory Settings; you can check this link where I did explain before how to fix this problem and for sure it will work for you as it can help all users whose using Windows 8/8.1 & 10 : Click here : How to Reset your Acer Lapotop/Computer to Factory Settings Or by following the instruction below which is almost the same : Step 1: Refresh your desktop and click on : Ctrl+Alt+Del Step 2: Click on the power button; the menu will show you: Sleep | Restart | Shutdown : You hold the shift button on your keyboard and you press the Restart option and don't release the shift key until it open for you another window. Step 3: Now you release the shift key and you click on Reset your PC. Step 4: Now you click next and you will be directed to the same step of choosing which method of reset you want: After that you choose the fully clean option to reset your PC to the factory settings however make sure before you do all this steps to copy or transfer your files to an external HDD because this operation will erase all you files and data. Best regards, Mehdi --------------------------------------------------------------------------------------------------------------------------------------If i was helpful to you, please give a KUDOS is appreciated and please mark "Accept as Solution", if that solved your problem.
I'm not an Acer employee. -
32 bit Factory Settings recovery issues REALLY CONFUSING
I accidently download some loaded stuff from time to time and so thus I have had to reset my toshiba 3 times to factory settings NEVER HAD A PROBLEM but this time when I try it it says insert recovery disk so i thought WTF? then when I went into EXTENSIVE system information reading My windows (that toshiba came with) is 32 bit (always has been) yet the recovery system is 64 bit! AND ONLY THIS TIME IS IT MAKING A BIG DEAL ABOUT IT and I was wondering if there was any way for me to change my system to 64 bit so I can reset my laptop for (hopefully) the last time. PLEASE HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Do you see a login screen when you boot. If so this is the WinRE boot disk. There should have been two of these, one 32-bit, one 64-bit. There should also be a "pure" recovery boot disk, this one will NOT have a login prompt. This is the one you should be booting from. It will display a screen that let's you select to install 32-bit or 64-bit. Have you tried recovering from the "0" (zero) key? This will also work without the login. With the machine powered down, press and hold down the "0" key, until see a progress bar appear across the bottom of the screen.
Rick... -
Restored to factory settings, Recovery mode, need to restore?? HELP!
When I connected my phone to my iTunes on my computer to do the update to iOS 7.0.4 (I think...) it said it needed to be restored to factory settings to complete the update. I clicked on it to restore, and it did the restore. It said it was restored to factory settings and it would have to restart to complete the restoration. It says not to disconnect it. Then that message disappears and a new message appears saying "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes." And I'm not sure what to do, because I have tried to restore it three times and it just keeps saying the same thing. Also, when the message comes up that it has been restored and to not disconnect it, my phone screen changes to a USB cord with an arrow pointing to the iTunes symbol like it has been disconnected but the USB is still connected. Help!!!
Hi there Paula120,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W. -
my daughter has not used her ipod touch for 16 months and has forgotten her passcode. restore factory settings keeps failing due to a software update failure!
how can i get this ipod reset. She now has an iphone so this is going to be used by someone else in the family and should be simple to do but itunes just keeps booting it out even though it recognises that it was previously connected to our itunes account as all of the children were on my accountThat has nothing to do with an update server. Do the following:
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes -
I plugged my phone into my laptop this morning and it started doing an update. I walked away from my desk, came back and had an error message and a prompt saying my phone is in recovery mode and needs to be restored. But when I click "ok" to do that it says it will restore the factory settings and I'll lose all media, data and contacts. I DON'T want to do that--the whole reason I plugged my phone in this morning was to download some new photos, so I can't lose them!
The phone isn't working...it's showing a usb connector pointing to an iTunes icon.
Help!!!If your phone is in recovery mode, you've already lost all data on the phone...its gone. Your only option now is to restore the phone, either from backup or as a new device.
-
my son has forgotten his 4 digit pass code for hios i pod touch. i have been instructed to disable it and connect to i tunes to restore factory settings. when I do this the download time is anything up to 20 hours and it keeps timing out. it is now saying that i tunes cannot connect to the i pod because it is locked with a passcode and saying that i must enter the passcode - can anyone help?
- To get around the passcode issue, place the iPod in recovery mode. For how to see:
iPhone and iPod touch: Unable to update or restore
- If you are getting a network timeout error during the restore, disable the computer's security software during the restore. -
My iPhone 4 will not turn on, when I plug it into my computer and load up iTunes its in recovery mode and the only option is to restore my device to factory settings, I have no back up of my phone I've also tried the home/sleep button thing but nothing, I have literally done every method I was told, I checked for water damage and that's fine. I don't want to restore my phone or buy a new one or pay for repairs because that's wasting money when it could be a simple way to fix it. And yes, I've also tried charging it and turning it in. I really need some help with my phone
That does happen. It depends on how hard the server is being hit, as well as the connection speed of your system. If you are on a windows system, you will want to disable any antivirus or firewall software during the download.
-
How do I take my iPod out of "Recovery Mode" without restoring to factory settings?
(iPod 4th Gen, Windows 7)
I hadn't synced my iPod touch for a long time, because just before Christmas, my antivirus stopped working on my laptop, and I got a virus. I was unable to do anything. Because of my circumstances, I wasn't able to get my computer back to normal until just about a week ago. During the time I didn't have access to my computer, I made a lot of purchases in the iTunes app.
Now that I have access to my computer again, I tried to sync my iPod. Since it had been a while, I needed to update it. Something must have happened during the update, but I don't know what. All I know is that now my iPod will only show the "Connect to iTunes" screen (so I can't use it at all), and when I connect to iTunes, it says my iPod is in "Recovery Mode." My purchases were not synced to my computer.
iTunes says to restore it, but I don't want to do that because I would lose all of the purchases I've made since Christmas. They weren't synced, so they would be wiped if I restored it, and only what is on my laptop would be re-synced.
Bottom line: is there a way to get my iPod to work again, without restoring it to factory settings? If not, then I spent all of that money in iTunes, and now what? I'm supposed to buy it again?
Thanks for taking the time to read this; I know it's long. I just wanted to make sure all of the details were there, because I've scoured the internet, and no one has a solution for this, other than wiping the slate clean, downloading a program from who-knows-where, with who-knows-what viruses attached to it, or jailbreaking. And those are not options.Yu can try to use this program to get the iPOd out of recovery mode.
RecBoot: Easy Way to Put iPhone into Recovery Mode | Jaxov
However, from what you describe, the iPod is very corrupted and a restore is required. I know of no way to get any ifno off the iPod -
I have a 4S and just tried updating to the latest iOS version and my phone went into recovery mode and iTunes says I need to restore to factory settings. Anyone know how I can fix my phone without losing all my content?
You would only be able to restore to a backup to iCloud or iTunes:
Restore from Backup
Cheers,
GB -
I attempted to update to iOS 8 and now my phone is stuck in recovery mode, and iTunes will only let me restore to factory settings. My question: Can I restore from iTunes backup after restoring to factory settings?
Hi, kformagg
I would say yes. I once had the same problem (iPhone 5, IOS 7) and first restored to factory settings and after that from iCloud backup.
It worked very well. -
when iphone is in recovery mode, does restoring to factory settings delete all pictures and videos?
linalinalina6 wrote:
when iphone is in recovery mode, does restoring to factory settings delete all pictures and videos?
Yes. -
New Mac only 5 days old. Daughter accessed a movie website and now popups keep appearing and unable to access any other Internet sites without being redirected. Have deleted her as a user and then tried to restore to factory settings. I did something wrong and it is now doing an Internet recovery. Help I am completly lost and don't know what I am doing.
You may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked. -
I updated my iphone 5 today and now I get a message on my phone that tells me to plug in and when plugged in to the computer I have a message that my phone is in recovery mode and that I need to restore my phone to factory settings, please help!
Are you really running Windows 98? I sure hope not. :S
I have noticed a few others with the same problem the past couple of weeks. Many of them were able to resolve the issue by doing a low level reformat of the iPod's flash storage using the instructions in this article.
http://www.methodshop.com/gadgets/ipodsupport/erase/
B-rock -
I tried updating to the IOS6, there was an error, and now my phone is in recovery mode and i need to restore to factory settings. Is there anything I can do?
You have to restore your iPhone. Same thing happened to me and many others. Sorry man.
Maybe you are looking for
-
How to connect to FTP server with out hardcoding the Password?
HI experts, IN my SAP R3 i neeed to send a small file to FTP server from SAP application server using abap program. I found out many FMS which can connect ot FTP , but password need to be stored in Program. As per security issues i am not allowed to
-
Z table middleware replication from R/3 to CRM
Looking for a CRM Middleware Guru out there !!! I'm trying to replicate a simple R/3 table (list of countries in my example below. The replication must include both initial and delta downloads. My problem is the following: When doing an initial load
-
Xcelsius output not rendering in versions of Adobe Reader higher than 9.0
I am using Windows XP Professional & Office 2007. My Flash Player version is 10.1.82.76 and my Xcelsius version is 5.1.3.0, Build #12,1,3,495. My issue came about when we started upgrading to Adobe Reader 9.3. With Adobe 9.0, I could create Xce
-
hi... when i m duing the migo,when i post the doc..then system showing following error msg. " G/L account 40100211 blocked for posting in company code 1000" when i m doing same bt vendor is diff.. then i not got any error msg... tell me what the so
-
HT201317 iCloud photo library (beta)
Hi ive just purchased a 200gb i-cloud package for the purpose of backing my photos up in the cloud and freeing up space on my iPhone, Only thing is when i delete my photos on my phone it also deletes from the cloud too. Whats the point of that? I kno