Factory Settings Restore ... for what??!!

I know that it will restore all origional phone settings ...
But for example ... in my N95 8GB ... I want to know exactly what are these settings that is included in the reset ...
I want to try it but I don't want to lose something that I didn't expected to lose...
is there a list of these settings ?

No data is lost with a revert to factory default settings (*#7780#).
You'll just have to set up your theme, profiles and menu style again.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Similar Messages

  • Installed latest softward for my ipad 2 and now it want's me to connect to iTunes and restore to factory settings!? What do I do? I can't access the iPad2 other than a screen that shows a plug being inserted into the iTunes logo.

    So I saw that my software needed to be updated, so I did it over  wifi, then a picture with the plug being inserted into the iTunes logo appears on the screen when finished the install. I plug my iPad 2 into the connector and iTunes sees the iPad 2 connected. Then a window opens that says to restore to use iTunes. I click restore and a second message appears stating something to the effect "Are you sure you want to restore to factory setting all info will be lost."
    NO I don't want to loose everything.
    My iPad only powers on with the image of a cord pugging into the iTunes logo. I can't get past it and I don't want to restore the iPad 2 to factory settings.
    What do I do?
    Any help would be appreciated.
    Frank

    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
     Cheers, Tom

  • HT1379 Hi will it delete everything on my computer and restore it to the factory settings because thats what I need.

    hey apple will this comand+option+p+r thing delete whole memory of my macbook and restore it to factory settings??

    No. Read http://support.apple.com/kb/HT1242
    for exactly what is stored in PRAM.
    Allan

  • HT1766 I have an i pod classic... tonight I went to sync some new music on it before going to the gym and it said it did not  my mac computer did not recognize my  classic and that it needed to be restored to factory settings.. What the heck??

    I HAVE AN IPOD CLASSIC , I WENT TO SYNC SOME NEW MUSIC ON IT AND MY MAC COMPUTER ON ITUNES SAID IT DID NOT RECONIZE MY CLASSIC . I DO NOT UNDERSTAND WHAT HAPPENED. WHY IS IT ASKING ME TO RESTORE IT TO FACTORY SETTINGS . THEN IT SAYS I WILL LOSE ALL MY MUSIC AND VIDEO'S . WHAT DO I DO??

    You do what it says. Your iPod encounterd an error and y have to restore the iPod. That happens sometimes..
    Just resync your media to the iPod after restoring.
    If necessarey, you can redownload most iTunes purchases by:
      Downloading past purchases from the App Store, iBookstore, and iTunes Store
    I also requested your post be moved to the iPod Classic forum

  • Ipad mini needs to be restored to factory settings after ios7 what will i lose

    young daughter updated ipad mini with ios7.3. ipad now showing only itunes logo and image of connection to computer.  connected to computer and itunes saying that ipad is in recovery mode and must be reset to factory settings and i will lose all data.  It also says that ipad software is up to date. Not sure what to do, any suggestions?

    If it is showing that message, there is no other option other then to restore it in iTunes.  That process will wipe everything off it and return it to as it was out of the box.
    If you have backups in iTunes or iCloud, you can restore from those once it is working normally again.  Anything other than audiobooks purchased from the iTunes or App stores can be re-downloaded if needed.

  • Iphone 3g Factory Settings Restore

    I restored the factory settings on my old Iphone 3g about a week ago now and it's still running. All it does is sit at the apple logo and has a pinwheel rotating. Every so often the screen will flicker like it's going to do something and then goes back into the infinite loop of processing. I've tried doing a hard reboot etc but it goes right back to the same place it was before. Anyone see this before? From what I've read online it is supposed to only take a few hours.
    Thanks for the replies!

    TS3694
    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.  Very rarely this error is caused by a hardware issue and requires service.
    Delete your ipsw file and let iTunes redownload it.

  • HT4759 How to turn iCloud on & says check email & no mail and says go to settings, but for what?

    How to turn iCloud on? Says check email-no mail then says go to settings- for what?

    In order to use your Apple ID to create an iCloud account, the primary email address associated with the ID must first be verified.  To do this, Apple will send a verification email to your account and you must respond to the email by clicking the Verify Now link.  Make sure you are check the spam/junk folder as well as the inbox.  If it isn't there, go to https://appleid.apple.com, click Manage your Apple ID, sign in, click on Name, ID and Email addresses on the left, then to the right click Resend under your Primary Email Address to resend the verification email.

  • Will restoring factory settings restore the os?

    If I restore factory settings to my macbook (running Lion), will it restore the os to Leopard?

    Use the Mac OS X disc that came with your computer. Insert it, press C key on boot, go to Utilities > Disk Utility, erase the drive and install Mac OS X. First, make a backup

  • Is it possible to restore the factory settings just for the internet?

    I am a student and I was having trouble logging in at my university. I called IT and they had me change all sorts of things under System Preferences - Network. They had me add a location and set the IP address manually. Now I am having trouble getting online anywhere else. I just want the network settings to be how they were when I got the computer 3 months ago and my ability to access technical support from apple just ended on Nov. 30 so I would really appreciate anyone's help.
    Thanks!
    Arielle

    Just tried this and it worked for me. Go into Network preferences and click the lock to allow you to make changes. Hit the minus key to delete all your different accounts. Once they are all gone you can add what you need back I usually use airport so that is the only one I brought back on line.

  • Re: restoring factory settings (see help what is disk write

    after succesfully putting my ipod into disk mode, i was able to restore the mini ipod. however the message says it has been restored and is restarting, but it seems to be taking a very long time - over an hour already.! Is this normal or is there something wrong? How long should it take? Waht should i do next? so far i haven't been able to se the ipod in itunes or anything. how do i know if it's formatted for windows?

    Formatting the iPod shouldn’t take any longer than a few minutes.
    First of all, try clicking on the little x in the top corner, which might take you to the next stage in the process. Sometimes it gets stuck.
    If this doesn’t work, shut down the computer, disconnect the iPod, restart the computer, run the updater again, and connect the iPod when prompted.

  • Factory settings/Restore

    Hello.
    I have a Nokia E71 with Straight Talk and have tried everything to get this phone reset. Contacted Straight talk, Nokia costumer care, third party companies and still no help. So heres my issue.
    I just want to do a Factory reset to my phone and start over. Only problem is when I go into settings and try to, it asks for a "Lock Code" well I can't remember my code when I use to use the phone a year or so ago. Therefore cannot do a system restore without it. Ive even tried the default code "12345" and no luck. Is there anyone that can help or tell me how to reset the phone so it will be original again? There has to be a way to bypass that Lock Code and restore the phone. HELP!!   Thanks
    Carlisle

    Did you try the Nokia Software Recovery Tool already?

  • F-Secure Key doesn't work after the factory settings restore?

    Hi, How do I install again F-Secure Key (desktop)after to restore the factory default settings? Thanks,Leka

    Hello Leka,
    What kind of error message are you seeing when you try to reinstall after you factory reset?

  • How do i reset my ipod to factory settings as for some reason in itunes it is giving me ipod full msg when it is empty

    I can't understand what is going on as my ipod 2gb 2nd gen. is saying that my ipod is full when i sync when it is empty.

    Hey,
    Plug it into iTunes and select the iPod on the left, click restore, however all data on the iPod will be lost and will need to synced again from iTunes which should have most of the iPod data if synced recently.
    J

  • My phone had to be replaced.  I backed up to the cloud and when I got home I thought it would upload to my phone, but it didn't.  I restored to previous backup on computer and now that's wrong.  Can I restore to factory settings/restore to my cloud?

    Is back up and sync the same thing?

    Is back up and sync the same thing?
    No. Syncing transfers iTunes content to your devices. Backing up stores all data (minus iTunes content) that you have on your phone, and can be loaded onto a different device or reloaded onto an existing device.
    Go to Settings > General > Reset > Erase All Content and Settings. Let the device power down and back up. Go through the setup screen and DO NOT select restore from iTunes backup. Instead, choose iCloud backup, sign in with your Apple ID and select the correct backup.

  • Laptop was turned off during a factory settings restore

    It was nearly finished and my 3 year old turned off my Toshiba. Now I cant get it to turn on at all. The Toshiba name flashes on then black. I've tried all the f' keys and zero key. Nothing. I don't know what to do. I use this for my photography business. Please help. I called Toshiba and he said I have to send it to a repair facility.

    I would try recovery again to see if you could burn the recovery media yourself  to save the money.
    Instructions are here:
    http://forums.toshiba.com/t5/System-Recovery-and-Recovery/How-To-Understanding-System-Recovery-Optio...
    To order recovery media go here:
    http://support.toshiba.com/recovery#media
    As Jerry said we need your complete model number, also you will need your model and serial number to order recovery media.
    S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Maybe you are looking for

  • Error during running crystal report when the region setting to Vietnamese

    I have a report called stock movement which stockmovement.rpt file. It has some formula field where the formula is onlastrecord; numbervar SysClosingQty; IF {usp_Rpt_Crystal_StockMovement;1.ReferenceNumber}="" OR IsNull({usp_Rpt_Crystal_StockMovement

  • Subcontracting Process for subsequent adjustment

    Hi All, Please find the screen shots of J1IF12, where i have received the 300 Qty. But in J1IFR, Qty is showing due for reversal. Thanks and Regards, Babar

  • Type expected

    I am a computer programming student and was given the assignment to write a program that would convert certain words into different words to create a "Sheboyganeeze" accent. The idea came from The Java Tutorial Third Edition, in which it gave a progr

  • Picture message help!

    I tried to send a picture message but it wouldn't go through.  I turned off iMessage and set it to go through SMS, but it still wouldn't go through.  I then turned on cellular data and it worked. Why is data connection needed? (I'm new to iphone)

  • Handling Error queue and Resolving issues - Best practices

    This is related to Oracle 11g R2 streams replication. I have a table A in Source and Table B in destination. During the replication by Oracle streams, if there is an error at apply process, the LCR record will go to error queue table. Please share th