Facturacion Electronica

Buen dia a Todos.
Alguien sabe si SAP en alguna actualizacion estara contemplando agregar un Modulo o Addon para la Facturacion Electronica.
Salu2

Estimado Gonzalo:
El error es muy generico,
En futuras versiones se va intentar mejorar para hacerlo mas descriptivo:
La única manera de analizarlo, es buscar en tu directorio temporal %temp% el archivo datasource.xml
Luego, y usando el Add-on EFM (Electronic Format Manager)
1- Abrir el esquema
2- En el menú de herramientas del EFM usar Advanced test: debes elegir External xml y seleccionar el xml del archivo temmporal
3-Abajo veras la pestaña de errores (1 por 1 con su explicación): si haces click en cada error, te va a marcar el campo afectado
Mira el mapping settings (para ver si existe algún formato, condición, fórmula) en el target. Tambien mira en el 'Source' (en caso de que el valor se tome del source)
Un problema comun pueden ser los puntos decimales etc
Espero queesto te de alguna pista
Saludos
Jose Antonio Castillo
SAP Business One Consultant

Similar Messages

ENVIO DE CORREO CON XML DE LA FACTURA ELECTRONICA

HOLA CHICOS, BUEN DIA,
Alguno de ustedes sabe como puedo configurar que el xml que se genera de factura electronica en SAP se envie una copia al correo del cliente?
Agradezco de antemano su apoyo.
SALUDOS
NANCY

HOLA MAURICIO,
Yo estoy utilizando la factura electronica nativa de SAPB1 que genera un xml. Estoy trabajando con 8.81pl07
saludos.

Factura Electronica.- Sello "Invalido" al momento de validar el xml en SAT

Buen dia!!
Se configuro en un ambiente de pruebas la factura electronica , se realizó la validación del xml en la pagina del SAT y no hubo problemas, pero al momento de pasar al ambiente productivo todos los xml que se validan marcan que el sello NO es valido; tanto la base de pruebas como la de productivo estan configuradas de la misma manera y contienen la misma información, con un cliente se resolvio cambiando información del detalle de sociedad, pero en esta empresa no ha funcionado espero me puedan ayudar.
Saludos,

Hola!
¿Puedes por favor revise los pasos sugeridos en la nota SAP 1542753?
Puede haber algunas diferencias en el XML debido al uso incorrecto de los certificados, las diferentes implementaciones de BADI o customizing.
REgards,
Renan Correa

How to configure or pair a Bright House Remote (Universal Electronics Atlas) with Apple TV

I live in Central Florida and have Bright House Networks as my cable provider. The remote I received for my Digital Television service is a ATLAS OCAP 5-Device by Universal Electronics.
When I tried to have the Apple TV learn this remote it didnt work. The Apple TV couldn't seem to recognize the signal from the ATLAS remote. So I tricked it. I had a spare remote it tested fine with the Apple TV so I had the Apple TV learn it. Then I programmed the spare remote to work with the VCR button on the ATLAS remote. Now the Apple TV recognizes the signal from the ATLAS remote.

Welcome to the Apple Community.
Hold the remote close to and pointed at the Apple TV, hold down the menu and FF buttons together for 6 seconds or until you see a chain icon on screen.

Crane Aerospace and electronics is looking for Test Engineers with LabVIEW experience - please disregard previous post.

Here is the correct post:
Are you detail-oriented, creative, and technically skilled at Engineering design and development? Come to Crane Aerospace & Electronics and use your excellent Engineering skills to design, improve, and deliver the next generation of products in the aerospace and electronics Industry!
We have a unique and exciting career opportunity for Engineer II, Test.
You will be responsible for maximizing new product development and manufacturing performance through the creation and deployment of test strategies, tools, and plans. Design and implement high performance hardware and software for test equipment. Authoring test procedures and performing Qualification test activities. Ensure high product quality.
Responsibilities:
Collaborate with customers and multi-disciplined engineers to establish/clarify test, qualification, verification and validation requirements.
Write test plans, procedures, requirements and reports in a highly structured environment.
Analyze, develop and deploy complex and high performance test hardware and software solutions for automated test equipment.
Design, develop, debug, validate & verify the fabrication of manual and automated test equipment at the circuit board and system level, and specify and procure COTS test equipment.
Develop/maintain hardware documentation including block diagrams, schematics, BOMs, wiring diagrams and wiring lists, software documentation, and configuration control of initial release and updates.
Perform detailed calculations to establish test equipment specifications and design margins.
Maintain existing test systems through bug fixes, improvements and modifications.
Support the estimation of costs and schedules to develop or upgrade test platforms.
To perform a number of the above responsibilities with limited supervision.
Minimum Requirements:
Experience: 2-5 years. Previous work experience in aerospace, space or medical electronics industry preferred.
Knowledge: Microprocessor / Microcontroller hardware and firmware design; Analog Circuit and power supply design; Digital Circuit Design including high-speed serial communication design; Firmware programming in c; Schematic Capture, PADS Logic preferred; Circuit Simulation; Fundamentals of magnetic proximity, temperature, and pressure sensing electronics; ESD; Familiarity with testing standards (MIL-810, MIL-704, and DO-160 preferred). Basic laboratory test equipment; LabVIEW experience, certification preferred; Developing hardware per DO-254 and software per DO-178 preferred; Experience with Adobe FrameMaker, IBM Rational tools, TestStand, Microsoft Project preferred.
Skills: Good interpersonal and communication skills (verbal and written)- effectively lead and/or participate in multifunctional teams in a dynamic work environment. Ability to manage multiple tasks, flexibility to switch between tasks and prioritize tasks.
Education/Certification: Bachelors Degree in electrical engineering, computer science, physics or related technical discipline.
Eligibility Requirement: Must be a US Person (under ITAR rules) to be eligible.
Working Conditions:
Working conditions are normal for an office/manufacturing environment. Machinery operation requires the use of safety equipment to include but not limited to safety glasses, heel straps, and shop coats.
Requires lifting 25 lbs
Apply online today: http://ch.tbe.taleo.net/CH06/ats/careers/requisition.jsp?org=CRANEAE&cws=5&rid=3170
Crane Aerospace & Electronics offers competitive salaries and outstanding opportunities for career growth and development. Visit our website at CraneAE.com for more information on our company, benefits and great opportunities.
In our efforts to maintain a safe and drug-free workplace, Crane Aerospace & Electronics requires that candidates complete a satisfactory background check and pass a drug screen prior to employment. FAA sensitive positions require employees to participate in a random drug test pool.

How can you say you are hiring test engineers with LabVIEW, yet the job description doesn't even mention LabVIEW. All I see in there is CAD design.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

I can not connect my I Pad to a Samsung TV. Does the following make any sense? Dear Phillip Baker, Thank you for contacting Samsung Electronics. We understand that you are not able to movies on the iPad on the TV. We are sorry to say that you can

Will the I Pad 2 connectr to a Samsung TV to play a movie from I Tunes. Samsung sent the following.
Dear Phillip,
Thank you for contacting Samsung Electronics.
We understand that you are not able to movies on the iPad on the TV. We are sorry to say that you can connect devices which are DLNA compatible and PC or laptops which are
installed with PC Share manager. If the iPad supports DLNA, you can connec it to the TV and play the files
supported by the TV. The TV supports following file video types : MKV, AVI, MP4, WMV, MPEG, MPG, ASF, 3GP, TS, TP, TRP. If you have any other questions, please feel free to contact us.
Thank you.
Samsung Online Support.
Any help?

What method of connection are you trying to use? DLNA looks like a standard for sharing media between devices over your home network, but I'm fairly certain the iPad doesn't support this protocol. Apple sell adaptors to connect your iPad directly to TV using composite or HDMI connectors. I'd be surpsied if your TV won't support either of those.
tt2

CLAD with MS in Electronics/Electrical engg looking for better opportunities

Priyanka Chaudhary
ob/4 wardens' residence medical boys hostel campus, near white church colony, Indore(M.P)-452001
[email protected]
OBJECTIVE:
==========
Seeking position as Labview Developer
EDUCATION
==========
Master of Science in Electrical Engineering
University of Kentucky, Lexington, KY.( G.P.A. 3.5/4.0)
May 2010
B.E. Electronics and Communications Engineering
Rajiv Gandhi Technical University, India
First Class with Honors G.P.A. 4.0/4.0
June 2007
SKILL SET
==========
Programming Languages: Labview (2011,2010,8.6),Simulink,VHDL, Verilog , C , C++, VC++, MATLAB C#,HTML, ASP.Net 4.0, Assembly Language
Development and Simulation Tools: Labview, Xilinx ISE, ModelSim, MATLAB, MS office Suite, VS .Net
Hardware: NI cRIOs, NI CDAQ, NI C-form thermocouple ,IEPE and strain gauge modules etc.,8085/8086 Processors, 8051/8951 Microcontrollers
WORK EXPERIENCE
===============
1)Assistant Manager, VE Commercial Vehicles Ltd. (OEM), Pithampur, July 2010-Present
-Certified Labview Associate Developer (CLAD) [Serial Number:100-311-4045; Issue date: Dec 29,2011;Expiration date: Dec 28 2013]
-Part of the software development team in the Vehicle Validation and testing Division
-Developed and deployed software in Labview for Testing Rigs required in the Fatigue and Endurance Labs.
-Attended Labview Core1 & Core2 training and preparing for Certified Labview Associate Developer exam (CLAD).
-Projects include:
--software development for Clutch endurance test using Master/Slave architecture;
--system identification, iteration and drive-file generation from RLD for Cabin testing on Moog Controller;
--Test Sequence generation for suspension leaf spring endurance and Front Axle endurance tests;
--R&D of Stewart’s Platform(Multi-Axis Shaker Table) in Simulink using Pro-E/CAD model and validation of the model parameters for Rig development in Labview.
--Single-handedly designed and deployed endurance test application on FPGA target using Labview 2011 using Modbus as communication protocol between variable frequency drives(ABB) and motors.
-Designed software utility manuals for rig operators.
2) IT consultant, Libsys Consultancy, Chicago, USA ,Sep 2010-March 2011
-Worked as Dot net developer apprentice/consultant for client (Thomson Reuters ) in Minnesotta,USA.
-Worked on Models –View-Controllers architecture to design Web applications.
3)Graduate Research Assistant, University of Kentucky, May 2008 - Aug 2010
Thesis : Spheroid detection in 2D images using Circular Hough Transform
-Collaborated with National Cancer Institute and the dept. of Opthalmology to prepare High Content –High Throughput Screening Assay (3D-ECSA) analysis platform.
-Ran an automated test bench with a motorized camera (VC++, MFC) for the assay analysis and image acquisition.
-Synthesized data stochastically similar to original, to increase the databank.
-Developed algorithm (MATLAB) to detect spheroids in data images using Circular Hough Transform.
-Demonstrated measures to classify identified spheroids according to shape and symmetry.
-Involved extensive application of Image Processing techniques.
4)Graduate Assistant, Graduate Housing Resident Manager, University of Kentucky,Feb 2010- May 2010
Responsibilities include, resolution of conflicts, inspections, attending to resident requests and acting as a bridge between the 100+ residents and housing body.
ACADEMIC PROJECTS
==================
1)Design and implementation of 2 special purpose processors,Spring 2008
-Designed two special purpose processors in VHDL in Xilinx ISE
-These were non-programmable and were designed to execute a repetitive custom logic
-Simulation was done in ModelSim and tested on Xilinx Virtex 5.1 FPGA.
2)Wireless Datacommunication between terminals using Frequency hopped spread spectrum,Spring 2007
-Prepared and etched PCBs for circuit base;
-Soldered HT-12 encoders/decoders, transceivers and PLL ICs to the PCBs to form a FHSS transceiver circuit
-Involved electronics and communication principles.
-Demonstrated the working of the units for duplex communication
PUBLICATIONS
=============
Correlation based swarm trackers for 3-dimensional manifold mesh formation
SPIE April 13,2009. Vol:7340 2009
RELEVANT COURSEWORK
===================
Graduate:
Digital Signal Processing, Deterministic systems, Real-time Embedded systems, VHDL, Antenna Design, Solid state electronics,
Electromagnetic field theory.
Undergraduate:
Mobile Communications, Satellite Communications, Fiber Optics, Microwave Circuits, Data Compression and Encryption, Microprocessors and Microcontrollers, Microelectronics, Digital Logic Design, Electronics
Attachments:
Priyanka_Chaudhary_resume_LABVIEW.pdf ‏130 KB

Message Edité par salimo le 11-04-2009 04:36 PM
~~~~~~~~~~~~~~~~~~Looking for a LABVIEW JOB (In EUROPE)>~~~~~~~~~~~~~~~~~~
**The Best Way To Predict**The**Future Is To Invent It**

Why do I depend on a carrier for 10.2.1 update if I bought the phone from an electronics shop, unlocked

I am mad on Blackberry for this, because I don't undestand why !
I bought the my phone, a Z10 from an electronics shop, so it is unlocked and not dependable on any carrier, and I paid premium.
The first time I turned on the phone, BB Link did update the OS, though some minor stuff.
Now I see carriers around the world are pushing the 10.2.1 update to their phones but what about me ? I do have a sim card of a carrier (Vodafone) wich did not release the update yet, but WHY DO I need to wait for them to push the update ? Why can't I just update the phone trough Blackberry Link ?
Is there a good reason why the update can only be made if the carrier the phone runs on make it available ?
I find this very stupid !

BlackBerry has never pushed updates direct to the user, always from the carrier.
So, no, there is no public documentation on that.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Is using a Delta Electronics DTX power supply in a Quicksilver 2002 risky?

After verifying that my original PSU was dead according to a procedure found in the forums, I purchased what was represented as an identical model (AcBel 614-0157 344W) but I received a Delta Electronics 614-0158 355W model instead. The main connector is the right size (22 pins) but the wire colors are different.
I've read DTX psu's have issues with Cinema Displays and can freeze up during sleep mode due to an unstable 5V trickle voltage. Can anyone confirm or deny the incompatibility?

This site appears to show it can. http://www.atomicoverload.com/servlet/the-3374/APPLE-G4-DPS-dsh-340AB-614-dsh-01 58/Detail
 Cheers, Tom

Will a Samsung Electronics 840 EVO-Series 500GB 2.5-Inch SATA III Single Unit Version Internal Solid State Drive MZ-7TE500BW work in a late 2013 Mac Mini

Will a Samsung Electronics 840 EVO-Series 500GB 2.5-Inch SATA III Single Unit Version Internal Solid State Drive MZ-7TE500BW work in a late 2013 Mac Mini

Would you happen to know if it will work in a mid 2007 iMac running Mavericks with 4GB of RAM? I need this to last this year and next year I am buying my MacPro, anyway, I dont want to put all the work in to installing it if its not going to work, thanks for any help!

Can't create a best buy account to order electronics

I have been trying for days to order an ipad with no luck. The website requires a best buy account when ordering electronics. Everytime I try to create an account it gives an error and says to try again later. I have emptied the cart, cleared the cookies, rebooted, done live chat, and even called best buy. Please help!!!!

Hello apol,
I am sorry to hear you are having difficulty creating an account on BestBuy.com. I hope this hasn’t inconvenienced you in any way.
If you would like, I could help create an account on your behalf. All I would need is for you to send me a private message with the following information:
·         Your first and last name
·         Your email address
·         Your zip code
·         Your phone number
·         Your My Best Buy member ID (this should be located on a receipt from a store purchase)
After I receive this information from you, I will go ahead and try to create your account. Once this is completed, I will send you a private message containing your password so you may then login to your account and reset your password to the one of your choosing. You may do this from your Account Home page on BestBuy.com.
Regards,
JD|Social Media Specialist | Best Buy® Corporate
Private Message

Searching for LabVIEW / Electronics Engineers in Houston

All,
   Looking for engineers that have experience designing embedded systems and/or LabVIEW systems.
   LabVIEW:
Provide examples of quality code.
Provide good understanding of C.S./software principles.
Electronics:
Experience designing embedded mixed-signal systems.
Embedded development w/ C.
Experience with Validation of designs.
   We're a small company in Houston, located in the Museum district.
   Please forward inquiries to [email protected] This posting is a local posting only, we're not interested in working with a remote partner on this project.

Hello Rob,
Just to check that we're on the same page:
Do you need to run LabVIEW on a 64-bit OS or do you explicitely need LabVIEW (64 bit)?
LabVIEW (32 bit) is compatible with both 32 bit and 64 bit OSes.
LabVIEW (64 bit) is only compatible with 64 bit OSes.
For the 2009SP1 and 2011 version you can go to ni.com/src and there select "Go to NI Software Products".
Afterwards click on LabVIEW and then you should see a very big list.
There select the appropriate versions..
Please keep in mind that to be able to do that you serial numbers for the software should be correctly linked to your NI account.
Kind Regards,
Thierry C - Applications Engineering Specialist Northern European Region - National Instruments
CLD, CTA
If someone helped you, let them know. Mark as solved and/or give a kudo.

Looking for a LabVIEW Test Engineer for Crane Aerospace and Electronics

Crane Aerospace & Electronics is seeking a Test Engineer in Lynnwood, WA to join our high performing Fluid Engineering Team. http://ch.tbe.taleo.net/CH06/ats/careers/requisition.jsp?org=CRANEAE&cws=5&rid=3616
Experience:
5 - 10 years’ experience in hardware test engineering, preferably in an aerospace related product field.
Knowledge:
Expert level proficiency in programming using LabVIEW ("Certified LabVIEW Developer" certificate, minimum) mandatory.
Knowledge of test equipment design and control using LabVIEW mandatory.
Experience working with fluids movement and control highly desirable.
Skills:
Test software design using LabVIEW and perhaps TestStand.
Hardware design using predominantly commercial off-the-shelf components and design of cables and harnesses.
Demonstrated ability to coordinate several projects and engineering activities while balancing priorities and schedule commitments.
Work independently under minimal supervision and guidance to perform tasks of substantial complexity and to be capable of leading and coordinating the efforts of junior engineers.
Familiarity with FrameMaker is highly desirable.
Exceptional troubleshooting skills.
Technical writing experience with a strong command of the English language is required.
Excellent written and verbal communication skills.
Education/Certification:
Bachelor’s degree in Computer Science, Electrical Engineering or related discipline.
Experience working for an aerospace or equivalent company with regard to the rigor of software creation and hardware design with emphasis on safety.
Eligibility Requirement:
Must be a US Person under International Traffic in Arms Regulations (ITAR) to be eligible.

Is this position still opened?

Crane Electronics UTA Rotary Transducer - pco422.doc (0/1)

"I'm trying to get a Crane Electronics UTA Rotary Transducer to talk
to MAX with no luck. This is a steel drive shaft located in low
friction ball bearings. The shaft incorporates a Wheatstone Bridge
strain gauge circuit and precision slip ring assembly rigidly attached
to the input end of the shaft. You can view it at
http://crane-electronics.com, click on Products then Transducers. I'm
using a PCI-1200 DAQ card with a CB-50LP I/O connector block. The
attachment shows the schematic, but I don't know which to connect to
for the power and data. The manual says that I should see +3.250 volts
when turning clockwise, -3.250 volts turning counterclockwise, and
zero torque should be 0v. I think the unit is a floating grou
nd but I
could be wrong. This is my first project as I am learning LabView and
DAQ. Crane Electronics doesn't want to help me other than give me the
schmatic. Can someone give me a hand with this?"

Hello;
This is a issue specificaly regarding Crane Electronics. They must give you more than just schematics. Contact them again and ask for more detailed information on how to connect power and data lines.
Filipe

Crane Electronics UTA transducer

I'm trying to get a Crane Electronics UTA Rotary Transducer to talk to MAX with no luck. This is a steel drive shaft located in low friction ball bearings. The shaft incorporates a Wheatstone Bridge strain gauge circuit and precision slip ring assembly rigidly attached to the input end of the shaft. You can view it at http://crane-electronics.com, click on Products then Transducers. I'm using a PCI-1200 DAQ card with a CB-50LP I/O connector block. The attachment shows the schematic, but I don't know which to connect to for the power and data. I think the unit is a floating ground but I could be wrong. This is my first project as I am learning LabView and DAQ. Crane Electronics doesn't want to help me other than give me the schmatic. Ca
n someone give me a hand with this?
Attachments:
pco422.doc ‏121 KB

Dennis,
Sounds like you need to find another vendor for your UTA Rotary Transducer.
However; I can probably suggest a method for getting the answers you need. Contact Crane and ask them how to get a scaled 0-10 volt linear output from the transducer, and/or to recommend a signal conditioning unit or method. I once had to build my own signal conditioner for a high accuracy gas pressure transducer. It cost about $35 and took about two hours to do. All it was was a 24V power supply to supply the transducer, some wires, and a BNC connector to allow me to route the actual signal(I believe it was a referenced signal, referenced to the PS reference) to the breakout box of my DAQ device.
Since I don't know the output of your transducer, I can't say wether or
not you can directly use the 1200 DAQ card to supply the necessary excitation to your transducer, but I would have to guess that you can't, and that you need a 24V power supply. Looking at the schematic doesn't help me at all, so I understand your issue.
Get back in contact with Crane, and TELL them you need to know how to excite the transducer, and what signal to expect and where, and what scale you need to be using.
Good luck

Facturacion Electronica

Similar Messages

Maybe you are looking for