Fade audio in and out

Hi there.
I have an audio file that I have dragged onto the timeline and set to repeat on fame 1.
However, I want to fade the audio of that particular mp3 on frame 25 as a video plays on that frame -  the audio clashes.
I also want to fade the audio back up of the mp3 when the video frame is exited.
Any ideas how this can be done?
Many thanks,
Alex.

Audio in iMovie 09 is a pain. In order to do this, you have 2 choices...
1. Your clip must have a video fade effect of some kind then go into precision editor, select to see audio from the waveform button near the middle right of the screen and then slide the audio (without effecting picture) either earlier or later.
2. You can Split your clip in multiple places, lets say 6. Then double click on each of them in turn, moving the audio level lower and lower until you get to the part of the split clip that will be zero. In order no to have the edit point sound cut, either set the auto fade to be manual/zero, or go into precision editor and overlap the audio edit points slightly.
Message was edited by: Michele Gardner

Similar Messages

  • Fade audio in and out throughout a clip

    Is thre any way to fade audio in and out throughout a clip, so say for example I want to fade it back just when someone is talking etc? it used to be so easy in previous imovies!

    Audio in iMovie 09 is a pain. In order to do this, you have 2 choices...
    1. Your clip must have a video fade effect of some kind then go into precision editor, select to see audio from the waveform button near the middle right of the screen and then slide the audio (without effecting picture) either earlier or later.
    2. You can Split your clip in multiple places, lets say 6. Then double click on each of them in turn, moving the audio level lower and lower until you get to the part of the split clip that will be zero. In order no to have the edit point sound cut, either set the auto fade to be manual/zero, or go into precision editor and overlap the audio edit points slightly.
    Message was edited by: Michele Gardner

  • New clips automatically fade audio in and out?

    When I add a clip from an event to the project there is automatically a fade in and out for the audio which I do not want. I checked under project properties but still couldn't find anything useful to turn this off. Any ideas?

    You can select all of your clips (by clicking one and using command A) and then manually chage the fade in and out for all of them at the same time in the inspector. That is how I do it but I do wish that I could find a setting to turn off the fade in and out effect, just the same as you.

  • Fade in's and out's

    I'm kinda confused on how to add Fade IN's and Out's to audio tracks, without actually fading the audio itself in the audio editor...
    I beleive ive heard you use automation with that? but I dont know where to go to do that...
    can anyone help? asap?
    thanks!!
    Jon Asher
    http://www.jonnyasher.com

    Arrange Window > View > Track Automation > Volume > Draw it in
    Or apply Fades with the Fade Tool
    Or assign them in the Paramater Box when you have the region selected you want to fade in/out.

  • Sample rate off the audio input and out devices do not match - what to do?

    This is fundamental, I know, but nevertheless I can't find my way around it. I get this error message when trying to recor:
    Sample rate off the audio input and out devices do not match
    and am asked to do this:
    Use the appropriate operating system or audio device control panel to adjust the sample rates of the input and output devices to use the same settingt.
    I have defined the sample rate to 44.1/16 bit in accordance with my inbuild soundcardt.
    I am trying to record from LineIn.
    When running on a M-Audio sound card I don't face any problems.
    HP 8560W, sound card IDT/High definition audio Codec
    Any suggestions?
    Knud
    Copenhagen

    You're sure you have set BOTH the input and output settings to 44.1 16 bit?
    Which version of Windows are you running?  There are a number of posts on this forum about how to fully access both the Windows Mixer and the Mixer for your soundcard.  Especially, you need to ensure that all "Windows Sounds" are turned OFF.

  • Todays update! After todays update I can no longer send Safari or Spotify to the task bar without it cutting out (dropping audio in and out). Streams normally if I keep the window open on my desktop. This needs to be fixed immediately.

    Todays update! After todays update I can no longer send Safari or Spotify to the task bar without it cutting out (dropping audio in and out). Streams normally if I keep the window open on my desktop. This needs to be fixed immediately.

    Nevermind. I figured it out.

  • Audio IN and OUT messed up - how to diagnose??

    I've got a weird issue and wondering if anyone can help. I have a Mac Pro and yesterday got a good mic and a pre-amp for my son to do some recording on GarageBand. I also installed the CuBase software that came with the pre-amp. The audio in and out is very erratic. Sometimes it will record, and sometimes not. And it will not playback properly (yes, I double-checked my Output/Input settings in System Preferences).
    The same problem is happening on the CuBase software (which is GarageBand on steroids).
    HOWEVER, when I fire up iTunes, all my existing MP3s come out of the speakers (line out) and headphone jack just fine.
    Anyone know if there are potential conflicts between the system and audio editing software? Or perhaps it's the sound chip on the motherboard?
    Related question: Can you add a sound card to a Mac Pro? I know the chip is soldered to the motherboard, but wondering if I can bypass that by adding a sound card?
    Thanks for any help.

    I haven't spent much time with Garage Band and I haven't used Cubase since OS9..
    But there may be settings right in the DAW software that sets the default ins/outs as opposed to having your system settings control where the audio goes..
    Another thing to take a look at is Audio MIDI Setup in the Utilities folder. It displays the system sound settings in a bit more detail...
    Currently, there might be 1 or 2 PCI-express "sound cards" out there, but your best bet would be to look for a USB or, preferably, a Firewire audio interface. There are many of these out there with a large range in pricing..
    If you are getting serious about recording, you may want to look at some of the small format mixers which include a USB or FW output. The advantage of these small mixers is that they are like swiss army knives for audio.. they allow you to route and mix audio in all kinds of ways that you would never imagine until you actually need it.. Some include digital effects, usually some EQ on every channel, from 2-16 mic pres, etc
    Another route, again if you are getting more serious, is to get a ProTools LE or M-Powered setup. This way you are getting "Industry Standard" recording software along with a selection of different audio interfaces to choose from depending on your needs..
    Apple Logic is also Pro-Level Software for a great price, especially at the current pricing.. You still need an interface, though, to get the most out of it.
    Browse around the computer recording section at www.sweetwater.com to get a good idea of what's involved..

  • How do you fade text in and out of a still image on Adobe Premiere CS6?

    How do you fade text in and out of a still image on Adobe Premiere CS6?

    Creating and editing titles

  • Audio in and out

    using both audio in and out in late 2009 macbook

    cdj connect the input audio for Ableton Live, and audio output for ampificador

  • Possible to use Audio In and Out simultaneously?

    Is there any additional adaptor/gadget that I can purchase so that both the Audio In and Out features of the audio jack can be simultaneously?
    For example, so that Audio In can be used to record an external source input while the Audio Out is piped to a headphone to monitor the recording?
    Thanks!

    Air has a headset jack.
    You can use a splitter
    Mics should be USB capable for best results, almost all headset mics are junk quality.
    then monitoring or listening thru the headphones
    consider using a PRO MIC , such as an Audio Technica AT2020 USB
    http://www.amazon.com/Audio-Technica-AT2020-USB-Condenser-Microphone/dp/B001AS6O YC/ref=sr_1_1?ie=UTF8&qid=1390776580&sr=8-1&keywords=at2020+usb
    or better still use one of these with pro XLR mics:
    http://www.amazon.com/Focusrite-2i2-USB-Recording-Interface/dp/B005OZE9SA/ref=sr _1_1?ie=UTF8&qid=1390776526&sr=8-1&keywords=2i2

  • How do you fade images in and out?

    Okay I know you use alpha to fade images in and out,but how?
    I want to fade oneimage in and then fade it out, then fade another
    one in rightafter it. How do I do this?

    hi,
    first frame - alpha 100
    last frame or anyother frame - alpha0
    between those frames, create a motion tween.
    it will fade as the movie plays. you have to implement it
    according to your needs.
    hope it helps,
    gaurav

  • Audio In and Out Question (Any iDevice)

    How would I get audio from my iPod and loop back in my iPod LIVE as a "Microphone" while hearing it LIVE?
    Is there any way with audio cables and such I could accomplish this?
    Thanks!
    -William

    Well I have an app that records my iPod microphone and I want it to record the actual sounds/music the iPod makes.

  • Airplay dropping audio in and out.

    My Airplay speaker keeps dropping the audio, I have a Time Capsule and Airport Express. The speaker works find on other routers. Can someone advise teh best setting to resolve this issue.

    Hey los1268,
    I'd check out the following document and follow the steps under the "Troubleshooting performance issues with AirPlay or AirPlay Mirroring" section:
    Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/TS4215
    Within those troubleshooting steps you'll find a section that goes over ensuring that your Wi-Fi router is set up with the recommended settings if you believe that to be the root of the issue.
    Cheers,
    David

  • Fade Music In and Out

    Hi All,
    I have a project I'm working on. The music for the web site
    starts almost immediately. I have a few sections where I'm loading
    other content where I want the music to end. What I would like to
    do is have the ActionScript fade the music out as the player enters
    the frame and the fade the music in as the player enters another
    frame. The name of my music file that is playing is Chill1.
    I'm a noobie so detailed help would be M U C H appreciated!
    Thanks,
    Scott

    Thanks for the reply kglad but I have NO IDEA what the heck
    you are talking about. Like I said I'm new to ActionScript and you
    might as well have written your reply in Russian or Chinese.
    I really need specific code to have any chance of getting
    this to work or a link to a good tutorial site on how to do this.
    The music I want to fade out is playing in Scene1. I have a
    movie clip that when the user enters that movie clip I want the
    sound to fade out and when they exit that movie clip have the sound
    fade in.
    Any help is appreciated!
    Thanks,
    Scott

  • Audio/in and out of phase

    I'm using a Audio Technica AT815ST stereo shotgun mic. It can be used in 3 modes MS, Stereo Narrow, and Stereo Wide. When capturing audio shot in MS mode into FCP the mid capsule comes in on audio track 1 and the side comes in combined, unmatrixed, on audio track 2. I've been told by Audio Technica that I need to copy track 2, put in on track 3, and then invert the phase of track 3. This then allows me to pan track 2 left and track 3 right giving me matrixed stereo. My question is: How do I invert the phase of the copied audio on track 3 in Final Cut Pro?

    I don't believe FCP has an audio filter to invert the phase of a clip. You can probably do it with Soundtrack Pro. See the Soundtrack Pro Manual, Page 163

Maybe you are looking for