Fade In / Fade Out during CurrentState Transition

Hi,
How is it possible to have elements to be fade in / fade out during the transition of currentstate? Thanks.

Hi,
Check this example.
http://adobe-center.net/devnet/flex/quickstarts/defining_state_transitions.html
It uses Resize effect with some filters. You can use the same technique to get the Fade effect

Similar Messages

Audio Cuts Out During Slideshow Transitions

Hi-
In my iDVD6 slideshow I have embedded audio. It cuts out during each transition. Do I have to not use transitions to keep that from happening?
Are there some transitions that don't make the audio cut out, or is it something else entirely? Thanks for any insights!
-Ranger

MacinTouch has a good discussion of this issue here:
http://www.macintouch.com/readerreports/idvd/topic2244.html
Besides making the slide show in iMovie, one poster at MacinTouch said he had always had success with DVD playback if he created the slideshow in Photo to Movie:
http://lqgraphics.com/software/phototomovie.php.
I just had this same problem with my very first iDVD. The problem does not appear to be with iDVD, but rather with DVD players that do not fully support the DVD spec or have large enough playback buffers. I found a little more insight here:
http://www.aidinc.com/features/dvdfaq.asp
I tried the disc I burned from iDVD in 2 different physical players and also in Tiger's DVD Player app. The disc works perfectly played back from computer. It played with just a slight bit of audio stutter on a 5 year old, under $100 Go player but with lots of stutter and even stutter on menu transitions in a 2 year old $250 Samsung DVD recorder.
I want to try burning the project from a disk image in Disk Utility using a slower burn speed but have not yet tried that.
My slideshow is pictures of a recent visit to relatives who are die-hard PC users. Unfortunately, I bragged to them about my Mac and promised to send them DVDs. Hope the discs will playback okay on their machines.
Hope this helps and Merry Christmas!
Paul

Audio distorted during fade in/fade out transitions

I'm using iMovie HD to edit an MP4 file. I've put fade in/fade out transitions at the beginning and end of the movie, but I notice that it either garbles the audio during these transitions or adds a loud clicking noise in place of the audio that should be there (i.e., the original audio fading in or out.)
Has anyone experienced this? Any idea how to work around the problem?
Thanks.

Maybe it is this?
http://docs.info.apple.com/article.html?artnum=107945
Sue

Multiple Sound fade outs during slideshow on a burned DVD

Using iDVD, I created a slideshow, from an iPhoto album.
I added music from my iTunes library.
I tried it on the screen, and it worked great.
Then I burned my DVD, and tried it on my TV set with a DVD player connected to it.
It works OK, except that at each slide change, during the transition, there is a sound fade out.
Then the music continues, to the "normal" sound level.
I did it twice.
One DVD burned with the slide timing forced to 5 seconds, and once with the automatic timing, that choses the timing based on the music duration.
Same result : Sound level fluctuation (fade out/fade in)
Anyone knows the solution

Do you have more than 99 photos in this slideshow? There is an issue similar to what you described when this is the case. I also wouldn't rule out music purchased from iTunes.
Here are two suggestions.
1. If you do have more than 99 photos, create your slideshow in iPhoto, and export it as a QuickTime movie. Then drag the movie icon into the DVD window; be sure to avoid the drop zones. Complete your project in iDVD.
2. Burn the music you purchased to a CD, and reimport as an AIFF file. iTunes>Preferences>Advanced>Importing>Import using: (drop down menu) AIFF encoder
Before you actually burn another DVD, first save as a disk image. This will allow you to view the project on your computer using the DVD player. You can catch any errors and correct them before burning the DVD.
I hope this helps.

Text changes size during fade-in/fade out.

I have a project where I wanted to lay in a simple full screen text element...just white text over black...between groups of clips. I'm VERY new to FCP. I had no problem creating the text, setting the length to 5:00 sec, and inserting it into the time line. I easily stuck a fade-in/fade-out 1 sec transition on either side of the text. After outputting to DVD, the text re-sized at the end of the fade in and at the beginning of the fade out. I'm working in anamorphic. I found the aspect setting in text and changed it to 1.77. Still NG. Any pointers would surely be appreciated.

I really just wanted to dip to black and come up text, followed by another dip to black and up on content. I tried dissolving to a color (black) and the distortion of the text during the dissolve was eliminated.
So what is the difference between a fade in/fadeout dissolve and a dissolve to black?

Switching off the fade in/fade out transition when viewing previews

In Library mode, when I'm switching between all my photos, there is a fade in fade out transition as it switches to the next photo. Can I get rid of this transition? I would like to just switch to the next photo without any fancy transition. Possible?

On my Mac version of Lr (4.1) I can't see any such "fade-in/out" effect. Going from one image to the next is pretty much instantaneous.
Sadly, that's about the only thing in Lr 4 that is instantaneous for me.
Phil

Can slide transitions fade in and out?

I have a slide show set with fade in transitions, and I want
the slides to fade out when the next slide fades in. Can someone
please tell me how to do this??
Thanks.

I'm sure there is probably some actionscript that can do
this, however I am unaware of it.
What you can do is:
1. Make sure each slide is converted to a movie clip
2. Create two keyframes for each slide
3. Create a motion tween between the two keyframes
4. Change the alpha on the second keyframe to 0% (this
creates your fade out)
To fade in, just change the alpha to 0% on the first keyframe
instead. Then you can move the tweens on the timeline to either
crossfade, or fade in fade out. Hope this helps.
GAMBRKER

Can't fade in fade out in iMovie?

I am now on my new mac mini using iMovie 10.0.6 and don't see the option to fade in - fade out in transitions. Is there an earlier version of iMovie that works on yosemite that still has those transitions?

Hello IntuitiveOne,
Welcome to the Apple Support Communities!
I understand that you are looking for different transitions in iMovie 10.0.6, specifically the fade transition. To change the style of a transition, please refer to the link and instructions below.
Modify transitions - iMovie Help
With your project open in the timeline, select Transitions in the Content Library section of the sidebar, below the Libraries list.
To preview a transition, skim it in the browser.
Browse transitions to find the new transition you want to use.
Drag the new transition to the transition icon for the transition you want to replace in the timeline.
The new transition replaces the old one.
Have a great day,
Joe

Ken Burns with Fade in Fade out Dissolve

I have about 300 pictures and want to add kens burns and fade in fade out dissolve to all at once then go one by one and adjust.
I figured out how to do copy paste attriubutes to all pics for Ken Burns, BUT not sure if there is a simple way to add Fade in Fade out Dissolve btn each of them to avoid doing 300x
Thanks much
drgwtv

OK I'll bite... Who is this Ken Burns?
There's a couple of ways to go about adding your transitions. I think is the easiest.
Make sure the favorite transition and length you want it are set in your effects tab. Select all of your clips in the timeline and drag them up to the canvas holding down the mouse. Several options should display and I believe the one you want is overwright with favorite transition. Its been a while since I've done but give it a try and post back if I'm wrong.
For bonus points-
Another way to quickly add your favorite transition is to use the arrow key or mouse to position the cursor at the edit point and press Apple+T

White fade instead of black in a transition

Hi,
I am working on a transition between two clips in FCE4. I want the transition to be a really quick fade out and fade in, almost like a really fast bright flash. I attached the two clips (I need to in order for the transition to be as fast as I desire and therefore can't use a white matte like I originally tried) and then place the fade in/fade out transition to overlap both clips. This works, only it fades quickly to black and then to my next clip. I want it exactly the way it is, only for the fade transition to be white instead of black. Any help?
Thanks a bunch.
Simon

So simple. Sorry to waste your time with that but it was extremely helpful.

Fade in Fade out dissolve automatically added to every cut

After two months I finally finished editing a movie. Exported and burned it to a dvd and saved the most final version. Came back two days later to do a bit more work and while working on it, and perhaps I accidently hit something, but the timeline did something funky I had never seen. It added what looked like ghost lines that I couldn't figure out how to remove. Shut things down and went back to it a day later only to find that every cut had a fade in fade out dissolve added. I tried going back to earlier saved versions but they turned out to all require a lot of work to get me to the final version. Seemed easier to just go back and delete and change the fade out fade in transitions.
Anyone know what happened?

Yes. If I have a timeline with clips on it:
and I select them all (by using, in the case Command + A):
Then install a dissolve by typing Command + T, it gets applied to all the cut points:
MtD

Why are my "Clip, Fade to" grayed out?

I'm new to iMovie (from Windows Movie Maker) and just playing around. I've created a project and I'm trying to use the "Fade to" options. But when I choose "Clip, Fade to" the options are grayed out.

In the project, click then drag across the clip thumbnails so that a section is highlighted with a yellow border. You can drag the handles in or out either side of the highlighted area in order to shorten or lengthen the selection. Now when you go to the menu item "Clip>Fade to" the selections for Black & White, Sepia and Dream will be available. Click on your preferred option to apply the effect.
The idea behind the "Fade to" is to create a gradual change within the clip from colour to black & white, sepia or dream. If you do this at the end of a clip, so that, say, the last 4 seconds are highlighted, the clip will gradually dissolve to the selected effect and finish on that effect. Or, you can create the effect within the clip so that it fades to the effect, then back to the original colour, based on where you've placed the highlighted area within the clip.
When you apply the effect, iMovie will split the clip at the appropriate points, then will automatically place a dissolve between each split segment.
NOTE: You can adjust the duration of the dissolve (fade) by double-clicking on the transition and adjusting the time in the Inspector.
John
PS. Highlighting a portion at the very beginning of a clip then applying the effect will cause the selection to change from the effect to the original colour. That is, you can fade up from black & white, or sepia or dream to the original colour.
Message was edited by: John Cogdell - added NOTE and fixed typos.
Message was edited by: John Cogdell - added PS

Fade in and Out

Hello Everyone,
I would like to ask the Pro a question.
I have a video clip which i want to cut and fade in and Fade Out the video and Audio.
I have searched on internet but i can not seems to find the right answer.Is it that complicated to do fade in and out?
Is there a simple way to fade in and fade out the entire video(video and audio) and NOT only video or Audio?
How can i do that.
Thank you very much

On a single clip, fade and dip to black are similar. If you have two clips next to each other fade will do a mix between them, using the dip to black will fade out the first clip going to black and the fade up the second clip. The yellow line shows keyframes, this is a way of changing effect parameters against time. This is an Adobe help file about them Adobe Premiere Pro Help | Adding, navigating, and setting keyframes If you search the net there are many tutorials. You can keyframe audio and video. Have you tried adding the default fade transition to the audio? I have no problems with it. The cpu can run flat out, if needs be Premiere will slow down the export to match the quality of your hardware.

When adjusting the audio volume in a selected region, why does it give me a curved line instead of straight and why cant I change it like i can with a fade in our out?

When adjusting the audio volume in a selected region, why does it give me a curved line as a transition instead of straight, and why cant I change the fade shape like i can with a fade in our out? When I slide thet volume all the way down it makes a very abrupt down curve. It's audibly noticdible.
Thank you.

Use the range selection tool and select the portion of the clip you want to change the volume on. Drag the volume line down and FCP will create keyframes which you can adjust as you want to get a fade shape.

Can a screen fade in and out???

Hi,
I am putting together a slide show using the Screens option
in Flash CS3. It is a series of photographs, and I want each one to
fade in, then fade out as the next shot is loaded. The transitions
seem to offer only an in OR an out fade - can't I do both??
Hope someone can clear this up.
Hugh

I'm sure there is probably some actionscript that can do
this, however I am unaware of it.
What you can do is:
1. Make sure each slide is converted to a movie clip
2. Create two keyframes for each slide
3. Create a motion tween between the two keyframes
4. Change the alpha on the second keyframe to 0% (this
creates your fade out)
To fade in, just change the alpha to 0% on the first keyframe
instead. Then you can move the tweens on the timeline to either
crossfade, or fade in fade out. Hope this helps.
GAMBRKER

Fade In / Fade Out during CurrentState Transition

Similar Messages

Maybe you are looking for