Fade in, hold and fade out in CS5

Is it possible to make a fade in, hold and fade out one picture at time in InDesign CS5? I don't want to do a click-event to change object states. I want to set three different time-laps to animate one picture.

Please repost in the InDesign forum. This forum is for general design issues, not how to use a program to create a specific effect.

Similar Messages

Creating fade in fade out effect in catalyst cs5

Hi there ive just downloaded the flash catalyst cs5 trial version and am trying
to create a fade in fade out effect with my pictures so i can upload to my
website. Ive been on it for two days now and am getting no where
anybody have any suggestions on how to do it. Ive tried alot of tutorials
on the net but nothing seems to work
please help thanks

To make maters worse all the tutorials i use seem to have different cs5 installed than me
they seem to have more features. They say click on this and click on that but i dont even
have what they say in my menus??? man why cant it be easy just upload the photos
click fade in fade out and be done with it.

My iphone won't start at all and slowly started to fade out

my iphone won't charge from Dec 31 midnight. well first it was freezing, and i lock it then i plug the charger. but it doesn't turn on until morning - right now actually. i already restore it and it was working but it freeze again! i reboot it over and over but black dots started to show up and the screen started to fade out. according to my experience, the screen were burned. is it means that i should go to the store for fixing it or i should get a new phone? HELP!

Did you try booting into your Recovery partition? Hold down the command and R keys whilst booting and if you can get to your Recovery partition use Disk Utility to verify your disk and, if needed, repair the disk.
If it can't be repaired, then it's likely dying.
Clinton

CS5 Aplha Fade Out Not Working

Has anyone encountered the alpha fade in CS5 not working when fading a graphic out? Example, I want to fade out a graphic symbol from 100% to 0%. When I try to make my fade to 0%, the alpha slider snaps to 100%. Hopefully someone can help out.

Okay, I think it's faster with a visual. Let's focus on the "train" layer. As you see I have four keyframes, the first set fades up from 0 to 100 and the last set is supposed to fade out from 100 to 0 but the the last keyframe where the playhead is, won't go to 0.

Specific region mouse over effect(Button 1 fades out and Button 2 fades in).

Dear All -
I am new to Flash CS5 and building Flash navigation bar with buttons on it.
Below is my problem description that I want to solve with your help.
I have a rectangular bar and placed one small button(Button 1) on this bar. Also, I have similar button(Button 2) with some graphics on it which is of similar size as to previous Button 1.
Button 1 - Without graphic.
Button 2 - With graphic on it.
What I want is that, whenever mouse is taken over Button 1 placed on the rectangular bar, it should fade out and simultaneously Button 2 should fade in. I want only button region to be sensitive to this mouse over effect and not the complete rectangular bar.
Kindly let me know how can I define the specific region(button region only) to be sensitive to mouse over effect in flash, and how to place Button 1 and Button 2 in layers so that both are at the same positition(so that there is no displacement of button detected).
Thank You,
Saurabh Khanna.

Hello -
Thank you for the reply. Button 1 does not have glowing effect, whereas Button 2 has a glowing effect. So what I wanted is that when initially Button 1 is loaded during page load, when I mouse over Button 1, Button 1 would fade out and Button 2 sitting behind Button 1 would automatically look like fade in(due to gradual fad out of Button 1 on top of Button 2).
I could do this now, and would like to Thank you for your reply.
I did this by creating movie clip on "Over" event of Button 1 and changing its Alpha property. But now what I want is how to gradually fade out, means when I remove my mouse from over button, then Button 2 should fade out gradually which will automatically make Button 1 fade in gradually.
I could not find the "Out" event just like we have "Over" event for Button, so I assume this can only be done using ActionScript somehow.
Let me know if I am going correct with my assumption, and possibly if you could help me achieve the remaining half(fading out gradually when mouse is removed from the button).
Thank You once again for your reply.
Thank You,
Saurabh Khanna.

Hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

Hey there Logic Pro21,
It sounds like you are seeing some odd performance issues with Logic Pro X. I recommend these troubleshooting steps specifically from the following article to help troubleshoot what is happening:
Logic Pro X: Troubleshooting basics
http://support.apple.com/kb/HT5859
Verify that your computer meets the system requirements for Logic Pro X
See Logic Pro X Technical Specifications.
Test using the computer's built-in audio hardware
If you use external audio hardware, try setting Logic Pro X to use the built-in audio hardware on your computer. Choose Logic Pro X > Preferences > Audio from the main menu and click the Devices tab. Choose the built in audio hardware from the Input Device and Output Device pop-up menus. If the issue is resolved using built-in audio, refer to the manufacturer of your audio interface.
Start Logic with a different project template
Sometimes project files can become damaged, causing unexpected behavior in Logic. If you use a template, damage to the template can cause unexpected results with any project subsequently created from it. To create a completely fresh project choose File > New from Template and select Empty Project in the template selector window. Test to see if the issue is resolved in the new project.
Sometimes, issues with the data in a project can be repaired. Open an affected project and open the Project Information window with the Project Information key command. Click Reorganize Memory to attempt to repair the project. When you reorganize memory, the current project is checked for any signs of damage, structural problems, and unused blocks. If any unused blocks are found, you will be able to remove these, and repair the project. Project memory is also reorganized automatically after saving or opening a project.
Delete the user preferences
You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
If you have upgraded from an earlier version of Logic Pro, you should also remove~/Library/Preferences/Logic/com.apple.logic.pro.
Restart the computer.
Isolate an issue by using another user account
For more information see Isolating an issue by using another user account.
Reinstall Logic Pro X
Another approach you might consider is reinstalling Logic Pro X. To do this effectively, you need to remove the application, then reinstall Logic Pro X. You don't have to remove everything that was installed with Logic Pro X. Follow the steps below to completely reinstall a fresh copy of Logic Pro X.
In the Finder, choose Applications from the Go menu.
Locate the Logic Pro X application and drag it to the trash.
Open the Mac App Store
Click the Purchases button in the Mac App Store toolbar.
Sign in to the Mac App Store using the Apple ID you first used to purchase Logic Pro X.
Look for Logic Pro X in the list of purchased applications in the App Store. If you don't see Logic Pro X in the list, make sure it's not hidden. See Mac App Store: Hiding and unhiding purchases for more information.
Click Install to download and install Logic Pro X.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Face time fades out and then tries to reconnect on new ipad retina display on WiFi. Iphone 4s has no problem with face time from exact same location and same contact. WiFi signal strong on both devices. What gives?

Face time fades out and then retries to connect (new Ipad Retina Display) on WiFi. Iphone 4s has no problem with face time from same location and same contact. What gives?

rdallas001 wrote:
Is the router to small?
Not necessarily, if you are using Facetime all the data goes through your WiFi router, your cable/DSL modem, your ISP and the internet to Apple's Facetime servers and then, in reverse, down to the Facetime recipient. If your ISP connection is too slow or there is excessive traffic on the internet you can have Facetime problems.
Most WiFi routers can handle this unless others in the house are also using WiFi at the same time. The problem may be your ISP connection or congestion on the internet, etc.

How can I have an object toggle between fade out and fade in with button?

Hello all,
I have a problem and I was hoping someone out there could help me out with it.
I have smart shape that is set to show for "rest of project" on one of my early slides. It is not visible in output in the properties, but when a user clicks a button in the project, it should fade in and then stay visible. If the user clicks the same button again, it should fade out and stay hidden. So rather than toggle between show and hide, which I know how to do, I want it to toggle between fade in and fade out. I am having trouble with this. Setting its transition to fade in and fade out in the properties of the smart shape doesn't help...
Here is the advanced action I have attached to the button that should allow the user to toggle between fade in and fade out. The "if" parts works -- the object fades in and then finally "shows" at 100% the "else" part almost works. It fades out, disappears, but then shows again, which I obviously dont want it to do. I want it to stay hidden.
If you can help, it would be great!!

I Don't
But as a work around you could try increasing the canvas size to match the illustrator file, paste in the object then crop off the excess canvas in photoshop

The volume on the second half of my Quicktime slideshow fades out--and I don't want it to do that!

I used FotoMagico 4.0 to make a slideshow. There are options for exporting, and I chose the one called Custom, which makes a Quicktime movie. For some reason the volume in the second half of the show starts to fade out, and by the end I can barely hear anything. If I export to their Standalone Player, which allows the slideshow to play on a Mac computer, everything works just fine. I'm at my wits end trying to figure out how to fix this. I want to be able to export the slideshow to Vimeo so that people on Macs and Pc's can both watch it, but I can't do it with the volume the way it is.

Go to System Preferences. Then under the General tab, there is a tick box saying "Restore windows when quitting and re-opening apps." Un tick that box. Once you start and quit Safari again, it will go back to your home page.

I have adobe Premiere Elements 13. It will not let me delete audio or have it fade in or out. I can move the yellow line all the way down till the volume reads -0.0, but the sound is still there on playback. I can click on fade in and fade out and the yel

I have adobe Premiere Elements 13. It will not let me delete audio or have it fade in or out. I can move the yellow line all the way down till the volume reads -0.0, but the sound is still there on playback. I can click on fade in and fade out and the yellow line that graphs volume takes a sharp raise or dip at the beginning or end of the clip, but there is no change in volume when I play back. What am I doing wrong?

rickeyt
Thanks for the reply. Great news about the volume adjusts.
Now about those fades for the volume. How are you doing that?
1. Right click the Timeline video audio and select Fade and then
see the Fade options (I had a video with audio file, so I saw the choices as shown in the screenshot)
2. You can also create two volume keyframes at each end of the Timeline audio clip rubberband (orange line that goes horizontally across the middle of the audio clip). At the position of the Timeline Indicator, click the Add/Remove Keyframe icon, and then with the mouse cursor position the white dots (volume keyframes) to achieve the Fade In and Fade Out audio. In the screenshot below I have moved the Timeline Indicator so that you could better see the white dots (volume keyframes).
Please let us know if any of the above works for you with regard to the audio fades.
Thank you.
ATR

Text shifts slightly at end of fade-in and at the start of fade-out

Hi, I have created text with a crossfade at both ends. I find that my text jitters a bit at the point where the fade-in ends AND at the point where the fade-out begins. How can I get rid of that slight shift?
Thanks, Bob

Hi Tom, I am working in standard DV, and viewing the jittery text straight off the timeline. By your question, I am starting to assume that this problem may disappear when this project is eventually burned on a disk and viewed on a TV?
By the way, thanks for all your generous help. I hope you realize that you are saving a lot of people from going crazy. I wish I knew your address, and could send you a gift.
Bob

How to edit i-tunes s.a. fade in, fade out, cut and save for burning CD ?

How to edit i-tunes, s.a. fade in fade out, cut and save for burning CD.
I was directed to this forum by i-tunes helpdesk. Can some give advise how I can process those additional features that are not available in i-tunes 8 ?
Thanks.
Kris.

Hi
iMovie'08 & 09 is not the best tools to do a DVD or a DiskImage (via iDVD) from.
You use iDVD to do the DiskImage - but that's when the movie is done.
You can't (at least I can't) do a diskimage first then put a movie into it.
The movie has to be encoded eg .mpeg2 and that's including the rest of the DVD structure too.
No body builds houses - roof first then the supporting walls to end with throwing
in a basement as a last action.
To do a Data-DVD (*not playable in a DVD-player*) is another story.
Just insert the DVD disk and when asked select format.
This makes a DVD-ROM and You can drop movies and other files into this but
when burned (taken out) it's done (one time burn)
Please elaborate on what You want to be the result.
iMovie HD 6 and iDVD'08 or 09 is a very nice combination.
Yours Bengt W

Image swaps with fade out and in

I am new to Dreamweaver, in fact only got into it to do my
own website. I want to create image swaps with a fade out and then
fade in with the new image. Nowhere can I find out how to do this
so far. Can anybody point me in the right direction. Many thanks
for your help now and in the past.
Perspectivist

This is a multi-part message in MIME format.
--------------000605070301090808040601
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
i see! well, that's good to know. i didn't realize you could
do
transitions on image swaps (of course, i've rarely used them
so far).
and i just assumed the OP was actually trying to do a
slideshow, which
could still be the case i guess. i suppose he's covered
either way!
Nancy O wrote:
> There are several image transition scripts on this page:
>
http://www.brothercake.com/site/resources/scripts/transitions/
>
>
>
> --Nancy O.
> Alt-Web Design & Publishing
> www.alt-web.com
>
>
>
> "Perspectivist" <[email protected]>
wrote in message
> news:[email protected]...
>
>> I am new to Dreamweaver, in fact only got into it to
do my own website. I
>>
> want
>
>> to create image swaps with a fade out and then fade
in with the new image.
>> Nowhere can I find out how to do this so far. Can
anybody point me in the
>> right direction. Many thanks for your help now and
in the past.
>>
>> Perspectivist
>>
>>
>
>
>
--------------000605070301090808040601
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
i see! well, that's good to know. i didn't realize you could
do
transitions on image swaps (of course, i've rarely used them
so far).
and i just assumed the OP was actually trying to do a
slideshow, which
could still be the case i guess. i suppose he's covered
either way!<br>
<br>
Nancy O wrote:
<blockquote cite="mid:[email protected]"
type="cite">
<pre wrap="">There are several image transition
scripts on this page:
<a class="moz-txt-link-freetext" href="
http://www.brothercake.com/site/resources/scripts/transitions/">http://www.brothercake.com /site/resources/scripts/transitions/</a>
--Nancy O.
Alt-Web Design & Publishing
<a class="moz-txt-link-abbreviated" href="
http://www.alt-web.com">www.alt-web.com</a>
"Perspectivist" <a class="moz-txt-link-rfc2396E"
href="mailto:[email protected]"><[email protected]></a>
wrote in message
<a class="moz-txt-link-freetext"
href="news:[email protected]">news:[email protected]</a >...
</pre>
<blockquote type="cite">
<pre wrap="">I am new to Dreamweaver, in fact only got
into it to do my own website. I
</pre>
</blockquote>
<pre wrap="">want
</pre>
<blockquote type="cite">
<pre wrap="">to create image swaps with a fade out and
then fade in with the new image.
Nowhere can I find out how to do this so far. Can anybody
point me in the
right direction. Many thanks for your help now and in the
past.
Perspectivist
</pre>
</blockquote>
<pre wrap="">
</pre>
</blockquote>
</body>
</html>
--------------000605070301090808040601--

How to fade in and fade out buttons ???

Hi guys I am building a website and I need help to fade in/ fade out buttons. Here is an example :
My main goal is that when I roll over the services button, I want the submenu (corporate and weddings) to fade in. Then when I roll over the portfolio button, I want the first submenu (corporate and weddings) to fade out and the second submenu ( clients, corporate, weddings, etc..) to fade in and to stay like this. Finally when I roll over testimonials, the second submenu fades out. And so on for the rest of the buttons.
FYI, i know how to animate the buttons to fade in/out but i dont know how to make them fade out when i roll over the other buttons.. I know this can be done with action script but I have no clue how...
I have attached my fla and swf.
http://www.habouryentertainment.com/files/site09_help.fla
http://www.habouryentertainment.com/files/site09.flw
Your help would be greatly appreciated !!!
Thanks

Some things you just have to take the time to unravel and learn. It's not difficult/complex, you just have to avoid letting the code overwhelm you by its appearance... instead of looking at pages, look at one page at a time, line by line... take your time and follow a tutorial.
People make tutorials to help those that need to learn, so there's no reason for anyone here to reinvent those wheels for every person that comes along. If you are looking for someone who'll hand you your solved design, sorry, I'm not that guy.

How to fade in and fade out audio in the new version of Imovie?

Please help me!
how to fade in and fade out audio in the new version of Imovie?

There is a tiny dot at the beginning and ending of an audio clip that can be moved to adjust fade in and fade out.

Fade in, hold and fade out in CS5

Similar Messages

Maybe you are looking for