Fade in/out soundtrack using iMovie for IOS on Iphone 5 or Ipadmini?

Hello!
Are there any possibility to fade in/out soundtrack using imovie for IOS on Iphone 5 or Ipadmini?
And are there any possibility to change the speed of playing the video (slomo, faster, etc)?
Thanx in advance for help.

Yes it is. It's 3 seconds and in the .m4r format. I used it since I first bought my phone.
One thing I've noticed, not that this has anything to do with it but... I named my phone xxx since I've had it, now when I hook it up to iTunes it shows up as xxx (2). Any idea what this is about?
thanks for your reply.

Similar Messages

Convert iMovie for iOS Trailer to a Project

Similar to how its done on the Mac version of iMovie, is it possible to convert a trailer to a project using iMovie for iOS
I want to convert the superhero themed trailer to a project, in order to add additional clips, pictures and increase times.

I would love to do the same. I can find instructions for the previous version but they don't apply to the current version (2.1). I'm using iMovie for both iOS 7 and 8, iPhone and iPad, repectively.

Add chapters with iMovie for iOS

Hi
Is it possible to add chapters to a movie using iMovie for iOS. I will like to import a mp4 movie file to iMovie on my iPad and add chapter markings so that it's easier to navigate when I play it on my Apple TV. Is this possible?
Thanks
Fresh1

No.

Hi I got iPad I'm using iOS. 7.1.1. Softwer but is no airdrop fecelity in that softer for iPad plees help me out to use airdrop for my ipad

Hi I got iPad I'm using iOS. 7.1.1. Softwer but is no airdrop fecelity in that softer for iPad plees help me out to use airdrop for my ipad
Witch verson I have to use for airdrop plees send me link forit

What model ipad do you have
the airdrop requirments are:
iPhone 5 or later
iPad (4th generation)
iPad mini
iPod touch (5th generation)

I've been using iMovie for a while now to make movies out of mostly travel photos and video clips. I try to vary the time for the photos from 1-4 sec. Any ideas out there?

I've been using iMovie for a while now to make movies out of mostly travel photos and video clips. I try to vary the time for the photos from 1-4 sec., although most of them are 1-2 seconds so as to keep it short. A friend of mine who saw my most recent product said that this is too short. Any ideas out there?

I apologize for my confusion on your question. I find that depending on the principal of each photo and my target audience to determine the time frame for each photo. It seems most people get impatient with viewing one photo for more than 1-2 seconds if the photo is not complex.
If there are several things that interests the viewers in any one image, they want to look at it a second or two longer. If the movie of images is a training aid, the images may need to be more than 3 seconds. For intro's, or a trailer for a training movie, no longer than 1-2 seconds.
That was a long answer to say, generally speaking, I find 3 seconds to be an average time length.

IMovie for iOS not finding videos since update to iOS 5.1

Hello everybody,
I just updated my iPhone 4 to iOS 5.1 to be able to get the newest iMovie for iOS update. The iOS Update as the iMovie Update went fine so far. But when I try to open projects I have made, iMovie just shows a yellow triangle and says that it can't find the movies. It tries to find them but with no success. I never moved the movies and they are still in the "Foto" App ( or camera-roll as it is namend sometimes). The Movies have all been taken with the build in camera, no import or nothing.
I guess Apple has changed the directories name of the "Foto App" so iMovie can't find the Movies made under iOS 4.x and the program is not "inteligent" enough to find the movies anymore.
Has somebody similar problems and could tell me how to re-link the movies?
Many thanks!
sergio

Jim20005 wrote:
> I'm using XLS transfomation in DW for reading XML files.
Now (I'm just back
> form holiday), my webspace provider has updated to php
5.1.5. I'm getting this
> error:
Comment out line 301 and add two new lines immediately after
it like this:
// $xml = DOMDocument::loadXML($content);
$doc = new DOMDocument();
$err = $doc->loadXML($content);
This is part of a PHP 8.0.2 hotfix that can be obtained
directly from
Adobe support.
David Powers
Adobe Community Expert
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
http://foundationphp.com/

IMovie for Mac: "iMovie cannot open files in the "iMovie for iOS Project" format."

Question, asked professionally
When will iMovie for Mac be able to open iMovie for iOS projects?
Question, asked snarkily
Any reasonable expectation that we will ever be able to edit projects--created in iMovie on our fancy new expensive phones--in iMovie on our fancy new expensive laptops?
Specs
iPhone 6 Plus (contract-free, 128 GB)
iOS 8.1.2
iMovie for IOS 2.1.1
MacBook Pro (Retina, 15-inch, Mid-2014)
OS X Yosemite 10.10.1
iMovie for Mac 10.0.6
Error Messages
iMovie for Mac: "iMovie cannot open files in the "iMovie for iOS Project" format."
iMovie for iOS: "An error occurred during export."
Frustration
Manufacturer: Apple (a multibillion dollar company)
The year: 2015
Hours lost: Three Weeks
Total costs for both devices: $4,000
Background Details
I just wasted thousands of dollars on these two hardware devices by making the rookie mistake of assuming projects were compatible across iMovie applications. However, the exported .iMovieMobile project files are in an incompatible iMovie for iOS Project format that iMovie for Mac cannot import. So I am stuck with a 15 GB .iMovieMobile project file--for an hour-long+ video--that I created and I was editing on my iPhone for weeks that I can no longer edit on my iPhone due to an error, nor potentially rescue the lost hours on my Mac, the sole reason I purchased it one day ago. The reason I can no longer edit the project on the iPhone is because iMovie for iOS suddenly stopped displaying the video of the project in preview, external display, etc. The clip snapshots remain visible and the audio remains audible, but the video appears fully black. Any attempt to export the video at any resolution generates an error message. (This error applies only to this project; other projects export without issue.) I can save to and from iTunes or iCloud without issue, but import into iMovie for Mac is unavailable for this latest version. Deleting and reinstalling the app does not resolve the issue. Nothing has resolved this issue; so I purchased the Mac as a last attempt, and it appears that I will have to begin the meticulously painful process of recreating the video from scratch with all the titling, sound effects, precise edits, transitions, organization, etc. This video was to surprise my mother for her birthday with "this is your life" footage, including my late father. It may seem like a small first-world problem, but such things carry big emotional impacts. What began as such a wonderfully intuitive and joyful experience has descended into a soul-suffering nightmare of catastrophic proportions. This software grinch stole christmas.
Likely Suspect
I believe this originated from Apple's confusingly designed iTunes client that removed videos used by iMovie for IOS during a sync, which I successfully restored back to the iPhone. This apparently resulted in iOS seeking and then claiming to find all of the videos, but somehow a bug in the coding causes the audio to play but not display video, and no way to resolve the bug from an enduser standpoint. I was hoping that iMovie for Mac would allow me a workaround, but I'll never know because the iOS and Mac formats are currently and dishearteningly incompatible.
Suggestions
I never performed a full backup of the iPhone, but I don't believe any of the iCloud nor local backups actually backup iMovie projects themselves anyway. (That's a fail.) So one must back them up manually to iTunes or iCloud.
MANUALLY BACKUP YOUR PROJECTS DAILY, IF NOT HOURLY.
MANUALLY BACKUP YOUR PROJECTS BEFORE IMPORTING OR SYNCING FROM ITUNES.
MANUALLY BACKUP YOUR PROJECTS BEFORE IMPORTING VIDEO CREATED OUTSIDE OF YOUR IOS DEVICE.
Resolutions
Hope Apple fixes this problem soon? Perhaps.
Return the Mac to Apple, if they allow? Perhaps.
Someone in this community will provide a magical workaround--that I haven't already attempted? Perhaps.
As unlikely these options may be, I shudder to imagine that I may be forced to suffer no resolution and $3,000+ completely down the drain, because if iMovie for IOS worked as intended, I wouldn't have ever purchased the Mac as a last ditch effort to rescue the project. It meant that much to me to surprise my mother by attempting to retrieve this project file from oblivion--but to no avail.

I appreciate you taking the time to copy and paste boilerplate responses to increase your points in this forum, but I've already read all those support articles in depth; but you have barely read my post at all. Please don't guess a fix. Only someone with the latest versions of iMovie, iOS, iPhone, Yosemite, and MacBook Pro is qualified to troubleshoot this, because anyone would immediately see that the following option no longer exists:
Open iMovie on your Mac, and choose File > Import > iMovie for iOS Project.
Read my post before you reply: It clearly says in the title and within my post that I can neither export nor import through iTunes without receiving an error message. So your response neither solved my question nor helped me whatsoever.

How to embed and launch ipa file from another ipa package created using Air for iOS

Hi Guys,
Anybody out there knowing how to embed and launch ipa file from another ipa package created using Air for iOS ?
I am having 1 ipa file created using Xcode, Now i need to include that file in my ipa Package which is created using Flash CS 5.5 and Air for iOS. Also i need to know how to open my 1st ipa file from AS3 ?
Thanks,

Hi Sir,
Thanks for your reply.
But in that case user need to download 2 applications right. I need user to download my parent application created using Flash and that package contain one more ipa created using Xcode, so from my parent app only user should able to open my 2nd app. Is there any way to do that?
Ps: I am not talking about in-app but 2 individual apps inside one package.

This version of iMovie cannot import Trailers created in iMovie for iOS.

I have the latest verison of iMovie on both my Mac and iPad 3g. I used a trailer on the iPad iMovie and exported it to iTunes. On my Mac I went to iTunes and pulled the file down and clicked to open it. After iMovie can up it dispalyed "This version of iMovie cannot import Trailers created in iMovie for iOS."
How can this be?

I'm having the same problem. I've check the instructions for exporting a Movie trailer that can be found in iMovie for iOS 6 and have followed them to a tee, numerous times. Each time i export a trailer i've created using the iPad, i can easily save it to my MacBookPro. But iMove on my laptop refuses to import a movie with the suffix ".iMoveTrailer", which is what you get in iMove for iOS6 when you export and use iTunes in Mac OS to save the file. How strange? There must be someting wrong going on here. Anyoner have any thoughts? I'm just trying to save an iMove trailer from the iPad and would like to burn it to a DVD to give to friends. Hmmmm.....

Any chance of success using iMovie for Film Festival Submission?

Say with iMovie, say 11, 09, or my old HD?
Or do I need Final Cut, say Express?
Will I be able to submit a sufficiently high def version using iMovie 11? Or will the degradation be too much, supposing that I edit in iMovie, then burn to DVD with iDVD.
The film will be about 7 minutes and shot with Panasonic GH1 and a Go Pro in HD. There may be slow motion and a mix of ambient sound, voice, and music.
It'll be entirely shot outdoors under somewhat nasty conditions. Meaning no lights, usually no tripod.
The reason I mention these latter points is that perhaps the quality of what I bring back (shaky, low light) might be the limiting factor and not the image degradation.
I have made many iMovies for YouTube, but would like to go bigger, so to speak, in quality of video, not necessarily length.
Would I benefit from going to Final Cut Express? Or could I stick with iMovie?
Anybody out there ever use iMovie for something like Banff Mtn Film Festival?

Yes, Banff Mtn Film Festival:
Here's what they ask (don't actually understand all the requirements, yet)
TECHNICAL REQUIREMENTS
For purposes of pre-selection, judging and festival screening, all
entries should meet the following criteria:
a) Entries MUST be accompanied by one polyboxed DVD-R NTSC
(Region 1 coded), which will be used for adjudication purposes.
b) Entries must also include a tape copy of the master. In order of
preference, videotape formats must be:
HD-D5 HDTV
DVC Pro
HDCam HDTV
HDV
Digital Betacam (525)
DVCam (525)
Betacam SP NTSC
MiniDV NTSC
Digital Betacam 625 and Betacam SP PAL/SECAM will
not be accepted. Due to reproduction issues, MiniDV
format is LEAST preferred.
c) Film entries must be 35mm or 16mm with OPTICAL or
MAGNETIC sound (no double band).
d) Production attributes should conform to typical broadcast
standards and include:
• 90 seconds of leader which include black, SMPTE colour bars
and black with either 0 dbvu (analogue) or –20dbFS (digital)
audio tone reference signals.
• Please remove commercial blacks and include a production
slate prior to the program start.
• 7.5 IRE Pedestal Black (preferred for NTSC).
• Maximum 105% IRE peak whites.
• Program start commences on the time-code hour.
• Program tail of two minutes of black.
• Digital content should be submitted with 48K audio and have
peak whites that do not exceed 105% IRE.

IMovie for IOS Cannot export 60p despite iPhone 6 capability to shoot 60p

Hi,
iMovie for IOS Cannot export 60p despite iPhone 6 capability to shoot 60p
I am obliged to use Pinnacle Studio for IOS 8
I have bought a superb iPhone 6 Plus, shooting in 1080/60p, I cannot edit my clips to build a 60p Master.
I understand the choice for shared video streams to use 720/30p 5Kb/s from my 1080/60p 25Kbps clips as it has to be streamed even on small PC.
But if I want a master file 1080/60p at 25Kbps, and send it by mail with the superb new Cloud Mail to my mac mates, I cannot do it
I need a master hacker to poke this 60 number I nee somewhere into iMovie, it should be somewhere in the compressor frameworks used by iMovie in the app Package for exporting.
SAME PROBLEM WITH I MOVIE 10.0.6 FOR OSX YOSEMITE,
Best regards to the community

I appreciate you taking the time to copy and paste boilerplate responses to increase your points in this forum, but I've already read all those support articles in depth; but you have barely read my post at all. Please don't guess a fix. Only someone with the latest versions of iMovie, iOS, iPhone, Yosemite, and MacBook Pro is qualified to troubleshoot this, because anyone would immediately see that the following option no longer exists:
Open iMovie on your Mac, and choose File > Import > iMovie for iOS Project.
Read my post before you reply: It clearly says in the title and within my post that I can neither export nor import through iTunes without receiving an error message. So your response neither solved my question nor helped me whatsoever.

Is this the right to use or for iOS can use dynamic google maps embeded(can be embedded fo iOS)

function displayMap(e) {
var title = e.data.title,
latlng = e.data.lat + ',' + e.data.lng;
if (typeof device !='undefined' && device.platform.toLowerCase() == 'android') {
window.location = 'http://maps.google.com/maps?z=16&q=' + encodeURIComponent(title) + '@' + latlng;
} else {
$('#map h1').text(title);
$('#map div[data-role=content]').html('<img src="http://maps.google.com/maps/api/staticmap?center=>' + latlng + ' &zoom=16&size=320x420&markers=' + latlng + '&sensor=false">');
$.mobile.changePage('#map', 'fade', false, true);
my phonegap (Adobe press, Powers jQuery with dw 5.5) book (old book (c)2010-11) says for above code: // is this valid for today, is this the right to use or for iOS can use dynamic google maps embeded(can be embedded fo iOS)???
On iOS, calling window.location loads the map directly
into the app. That’s great until you realize that iOS devices
don’t have a Back button, so there’s no way to exit the
map. To get round this problem, I loaded a static map as
an image in the map page block. It’s not interactive, but at
least you can continue using the Travel Notes app after
viewing the map by clicking the Back button generated by
jQuery Mobile.

Well, this took me a while to get solved, but it is indeed solved.
I tried USB Overdrive and it could, and perhaps should work, but apparently it will not. When adding a device, it seems that USB Overdrive is not set up to handle any input device that does not register itself as either a Mouse or a Joystick. The VEC USB Footpedal that I'm using is "Device type: Other".
So, I went for Quickeys. And Quickeys can do it all. It did recognize the device, I was able to assign it to the scope of the particular audio playback app I wanted to use (Amazing Slow Downer OS X - which is truly amazing. Any musicians reading this who are looking for a way to learn pieces by ear, this does it better than anything else I've seen yet).
I created a shortcut in Quickeys for the ASD app; added the middle button of the foot pedal as the trigger; set one step, entering 'space bar' as the step (which toggles playback, similar to many audio players).
It all worked.
Quickeys is very confusing and seemingly featured with an endless array of options. Enter at your own risk. Ask me for help. This was the only way to get it done that I could find. I did write to the author of USB Overdrive asking him to please support additional devices as I did find some traction from gamers who like to use a foot pedal in addition to other input devices. There was a Windows-only management utility for the foot pedal that was intended for custom input, assigning the buttons to any keyboard input or mouse click event. It would be nice to have a simple and easy to use utility like this. But, Quickeys did do the job.
Thanks for your help, you guys!!!

IMovie for IOS just updated

http://itunes.apple.com/de/app/imovie/id377298193?mt=8
other :
all iwork apps for ios now at v1.5, too ( icloud support )

I don't have a PC to test my iMovie for iOS videos on, but thought I would share some information about the format of my exported files and how I view them. Hopefully that may help!
Looking at my most recent video (not a Trailer, just a standard themed video), after exporting from iMovie on my iPhone then importing to iPhoto on my MacBook Pro, the file details are:
For video: H.264 960 x 540 (I exported as Large)
For audio: AAC 44100 Hz, Stereo (L R)
In QuickTime, this information can be revealed by selecting Window > Show Movie Inspector from the menu.
How are you viewing the movie on the PC? Are you using QuickTime? If not you can download a version for Windows from Apple's site (Google it). The movie should play perfectly on QuickTime, whether on a Mac or on a Windows PC.
John

When using imovie for Ipad, how can I fast forward a project to cut the length down?

When using imovie for Ipad, how can I fast forward a project to cut the length down to fit under the 15 minutes required for Youtube? My current project is 23 minutes, and need to cut it down below 15 minutes. I was hoping to speed up the video. The content would actually be better viewed in at a faster speed anyhow.

Jon,
It sounds like you did, just as you should, Save_As and Delete everything that is unwanted. If you did the Deletion from the Timeline, there should be nothing from the old Project, that should be included. A DVD is Transcoded and burned from the Timeline. If the Assets are not there, they will not included in the DVD, even if you did not Delete anything from the Project Panel.
Tell us about the Clips now on your Timeline. Also, can you check the Timeline, by hitting the \ (Backslash key), and looking near the end of the Timeline. Do you have any "orphans" out there? Check all Video Tracks, even if you have to scroll to see them all. Does the Duration of the Timeline (viewed in the Program Monitor) match what you think that it should? If not, then you most likely have orphans, that you missed Deleteing.
Good luck,
Hunt

IMovie for iOS help

Hello
Can anyone help me? I have just filmed a trailer using the latest version of iMovie for iOS (on an iPad 3). I then exported it from iMovie to Camera Roll as a 720p movie. On my iMac I opened iPhoto and imported the video from my iPad's Camera Roll - dragged the file to the desktop and then copied onto a USB stick.
The video plays perfectly on the iMac (running Mountain Lion) and perfectly on the iPad.
When I attempt to play the video on a PC running Windows 7 it plays the movie fine BUT there is no sound (I have checked all the PC sound settings). So I went back to the iMac - put the video into QuickTime and re-exported. Again it works fine on the iMac (with full sound) but when I go to the PC - video plays but no sound at all. I even tried importing the trailer into iMovie 11 on my iMac and then export - still no sound when played on a PC!
Does anyone have any idea what is wrong? It is driving me mad.
Any help would be hugely appreciated.

I don't have a PC to test my iMovie for iOS videos on, but thought I would share some information about the format of my exported files and how I view them. Hopefully that may help!
Looking at my most recent video (not a Trailer, just a standard themed video), after exporting from iMovie on my iPhone then importing to iPhoto on my MacBook Pro, the file details are:
For video: H.264 960 x 540 (I exported as Large)
For audio: AAC 44100 Hz, Stereo (L R)
In QuickTime, this information can be revealed by selecting Window > Show Movie Inspector from the menu.
How are you viewing the movie on the PC? Are you using QuickTime? If not you can download a version for Windows from Apple's site (Google it). The movie should play perfectly on QuickTime, whether on a Mac or on a Windows PC.
John

Fade in/out soundtrack using iMovie for IOS on Iphone 5 or Ipadmini?

Similar Messages

Maybe you are looking for