Fade out and in
Sorry, I know this is basic stuff. I have learned to fade out individual tracks, but not the entire song. Help, please?
Usually song fade outs are made while mastering but if you really need to then open the mixer, enable automation and make a manual fade out.
cheers
rob
Similar Messages
-
Face time fades out and then retries to connect (new Ipad Retina Display) on WiFi. Iphone 4s has no problem with face time from same location and same contact. What gives?
rdallas001 wrote:
Is the router to small?
Not necessarily, if you are using Facetime all the data goes through your WiFi router, your cable/DSL modem, your ISP and the internet to Apple's Facetime servers and then, in reverse, down to the Facetime recipient. If your ISP connection is too slow or there is excessive traffic on the internet you can have Facetime problems.
Most WiFi routers can handle this unless others in the house are also using WiFi at the same time. The problem may be your ISP connection or congestion on the internet, etc. -
How can I have an object toggle between fade out and fade in with button?
Hello all,
I have a problem and I was hoping someone out there could help me out with it.
I have smart shape that is set to show for "rest of project" on one of my early slides. It is not visible in output in the properties, but when a user clicks a button in the project, it should fade in and then stay visible. If the user clicks the same button again, it should fade out and stay hidden. So rather than toggle between show and hide, which I know how to do, I want it to toggle between fade in and fade out. I am having trouble with this. Setting its transition to fade in and fade out in the properties of the smart shape doesn't help...
Here is the advanced action I have attached to the button that should allow the user to toggle between fade in and fade out. The "if" parts works -- the object fades in and then finally "shows" at 100% the "else" part almost works. It fades out, disappears, but then shows again, which I obviously dont want it to do. I want it to stay hidden.
If you can help, it would be great!!I Don't
But as a work around you could try increasing the canvas size to match the illustrator file, paste in the object then crop off the excess canvas in photoshop -
The volume on the second half of my Quicktime slideshow fades out--and I don't want it to do that!
I used FotoMagico 4.0 to make a slideshow. There are options for exporting, and I chose the one called Custom, which makes a Quicktime movie. For some reason the volume in the second half of the show starts to fade out, and by the end I can barely hear anything. If I export to their Standalone Player, which allows the slideshow to play on a Mac computer, everything works just fine. I'm at my wits end trying to figure out how to fix this. I want to be able to export the slideshow to Vimeo so that people on Macs and Pc's can both watch it, but I can't do it with the volume the way it is.
Go to System Preferences. Then under the General tab, there is a tick box saying "Restore windows when quitting and re-opening apps." Un tick that box. Once you start and quit Safari again, it will go back to your home page.
-
I have adobe Premiere Elements 13. It will not let me delete audio or have it fade in or out. I can move the yellow line all the way down till the volume reads -0.0, but the sound is still there on playback. I can click on fade in and fade out and the yellow line that graphs volume takes a sharp raise or dip at the beginning or end of the clip, but there is no change in volume when I play back. What am I doing wrong?
rickeyt
Thanks for the reply. Great news about the volume adjusts.
Now about those fades for the volume. How are you doing that?
1. Right click the Timeline video audio and select Fade and then
see the Fade options (I had a video with audio file, so I saw the choices as shown in the screenshot)
2. You can also create two volume keyframes at each end of the Timeline audio clip rubberband (orange line that goes horizontally across the middle of the audio clip). At the position of the Timeline Indicator, click the Add/Remove Keyframe icon, and then with the mouse cursor position the white dots (volume keyframes) to achieve the Fade In and Fade Out audio. In the screenshot below I have moved the Timeline Indicator so that you could better see the white dots (volume keyframes).
Please let us know if any of the above works for you with regard to the audio fades.
Thank you.
ATR -
Image swaps with fade out and in
I am new to Dreamweaver, in fact only got into it to do my
own website. I want to create image swaps with a fade out and then
fade in with the new image. Nowhere can I find out how to do this
so far. Can anybody point me in the right direction. Many thanks
for your help now and in the past.
PerspectivistThis is a multi-part message in MIME format.
--------------000605070301090808040601
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
i see! well, that's good to know. i didn't realize you could
do
transitions on image swaps (of course, i've rarely used them
so far).
and i just assumed the OP was actually trying to do a
slideshow, which
could still be the case i guess. i suppose he's covered
either way!
Nancy O wrote:
> There are several image transition scripts on this page:
>
http://www.brothercake.com/site/resources/scripts/transitions/
>
>
>
> --Nancy O.
> Alt-Web Design & Publishing
> www.alt-web.com
>
>
>
> "Perspectivist" <[email protected]>
wrote in message
> news:[email protected]...
>
>> I am new to Dreamweaver, in fact only got into it to
do my own website. I
>>
> want
>
>> to create image swaps with a fade out and then fade
in with the new image.
>> Nowhere can I find out how to do this so far. Can
anybody point me in the
>> right direction. Many thanks for your help now and
in the past.
>>
>> Perspectivist
>>
>>
>
>
>
--------------000605070301090808040601
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
i see! well, that's good to know. i didn't realize you could
do
transitions on image swaps (of course, i've rarely used them
so far).
and i just assumed the OP was actually trying to do a
slideshow, which
could still be the case i guess. i suppose he's covered
either way!<br>
<br>
Nancy O wrote:
<blockquote cite="mid:[email protected]"
type="cite">
<pre wrap="">There are several image transition
scripts on this page:
<a class="moz-txt-link-freetext" href="
http://www.brothercake.com/site/resources/scripts/transitions/">http://www.brothercake.com /site/resources/scripts/transitions/</a>
--Nancy O.
Alt-Web Design & Publishing
<a class="moz-txt-link-abbreviated" href="
http://www.alt-web.com">www.alt-web.com</a>
"Perspectivist" <a class="moz-txt-link-rfc2396E"
href="mailto:[email protected]"><[email protected]></a>
wrote in message
<a class="moz-txt-link-freetext"
href="news:[email protected]">news:[email protected]</a >...
</pre>
<blockquote type="cite">
<pre wrap="">I am new to Dreamweaver, in fact only got
into it to do my own website. I
</pre>
</blockquote>
<pre wrap=""><!---->want
</pre>
<blockquote type="cite">
<pre wrap="">to create image swaps with a fade out and
then fade in with the new image.
Nowhere can I find out how to do this so far. Can anybody
point me in the
right direction. Many thanks for your help now and in the
past.
Perspectivist
</pre>
</blockquote>
<pre wrap=""><!---->
</pre>
</blockquote>
</body>
</html>
--------------000605070301090808040601-- -
Simultaneous fade out and fade in and image
I currently have code that fades out on canvas of a view
stack and fades in a second canvas of the view stack. However, my
desired behavior is that the fade out happens as the fade in
happens so it would simulate a tween effect like when making
animated gif's. Is there a way to do this, and if so does anyone
have any sample code to do this?so the fade out and fade in are working like you said,
however I want then to be in the same position on the page. I would
like each canvas to be at coordinates (0,0). Here is my code, but
the canvas' are stacked vertically? Is what I want to do possible?
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
creationComplete="initApp();">
<mx:Style>
Application {
backgroundColor: #ffffff;
backgroundGradientColors: #ffffff, #ffffff;
</mx:Style>
<mx:Script>
<![CDATA[
import mx.controls.Alert;
[Bindable] private var homePageImageId:int = 0;
[Bindable] public var intervalId:uint;
[Embed(source="images/3_1813714899.jpg")]
[Bindable] public var imgClass3:Class;
[Embed(source="images/5_2065488856.jpg")]
[Bindable] public var imgClass5:Class;
[Embed(source="images/6_717433985.jpg")]
[Bindable] public var imgClass6:Class;
[Embed(source="images/9_263548684.jpg")]
[Bindable] public var imgClass9:Class;
function initApp():void {
checkDelayCounter();
intervalId = setInterval(checkDelayCounter,4000);
function checkDelayCounter():void {
if ( homePageImageId == 0 ) {
canvas0.visible = false;
canvas1.visible = true;
homePageImageId = 1;
} else if ( homePageImageId == 1 ) {
canvas1.visible = false;
canvas2.visible = true;
homePageImageId = 2;
} else if ( homePageImageId == 2 ) {
canvas2.visible = false;
canvas0.visible = true;
homePageImageId = 0;
]]>
</mx:Script>
<mx:Fade id="fade_in" duration="750" alphaFrom="0"
alphaTo="1"/>
<mx:Fade id="fade_out" duration="750" alphaFrom="1"
alphaTo="0"/>
<mx:Canvas id="canvas0" showEffect="fade_in"
hideEffect="fade_out" visible="true" alpha="0" x="0" y="0">
<mx:Image id="homePageImage6" source="{imgClass6}"
width="990" height="400" x="0" y="0"/>
</mx:Canvas>
<mx:Canvas id="canvas1" showEffect="fade_in"
hideEffect="fade_out" visible="false" alpha="0" x="0" y="0">
<mx:Image id="homePageImage3" source="{imgClass3}"
width="990" height="400" x="0" y="0"/>
</mx:Canvas>
<mx:Canvas id="canvas2" showEffect="fade_in"
hideEffect="fade_out" visible="false" alpha="0" x="0" y="0">
<mx:Image id="homePageImage5" source="{imgClass5}"
width="990" height="400" x="0" y="0"/>
</mx:Canvas>
</mx:Application> -
I'm trying to make a ring to for iPhone and about 20 sec into the playing of the song it fades out and goes silent. What am I doing wrong? Thanks
Im not sure what garage band is, but i can tell you the way apple recommends making ringtones. Highlight a song in iTunes, right click and select get info. Goto the options tab and youll see the time lengths (write down the ending time) for the start time type in where you want the ringtone to start, ringtones can only be 30 sec long so make the ending time 30 sec later. Exit it out of the info and while song highlighted goto the "advanced" tab at the top of iTunes where you will see an option that says "create aac version". after creating the aac version you will have a duplicate song in your iTunes, change the original back to the correct time length. Take the 30 sec aac version and drag it to your desktop, right click the icon and click "preferences" You will then be able to change the name of the file which will be somethign to the effect of "songnamehere.m4a" you just change the m4a to m4r. you now have a ringtone, drag the new file to iTunes where it will pop up in a new tab labled ringtones. If you cannot change the name of the file when it is on your desktop let me know and i will give you instuctions how to be able to change it. Once you get it figured out you can use any song you have on iTunes to make a ringtone.
-
Specific region mouse over effect(Button 1 fades out and Button 2 fades in).
Dear All -
I am new to Flash CS5 and building Flash navigation bar with buttons on it.
Below is my problem description that I want to solve with your help.
I have a rectangular bar and placed one small button(Button 1) on this bar. Also, I have similar button(Button 2) with some graphics on it which is of similar size as to previous Button 1.
Button 1 - Without graphic.
Button 2 - With graphic on it.
What I want is that, whenever mouse is taken over Button 1 placed on the rectangular bar, it should fade out and simultaneously Button 2 should fade in. I want only button region to be sensitive to this mouse over effect and not the complete rectangular bar.
Kindly let me know how can I define the specific region(button region only) to be sensitive to mouse over effect in flash, and how to place Button 1 and Button 2 in layers so that both are at the same positition(so that there is no displacement of button detected).
Thank You,
Saurabh Khanna.Hello -
Thank you for the reply. Button 1 does not have glowing effect, whereas Button 2 has a glowing effect. So what I wanted is that when initially Button 1 is loaded during page load, when I mouse over Button 1, Button 1 would fade out and Button 2 sitting behind Button 1 would automatically look like fade in(due to gradual fad out of Button 1 on top of Button 2).
I could do this now, and would like to Thank you for your reply.
I did this by creating movie clip on "Over" event of Button 1 and changing its Alpha property. But now what I want is how to gradually fade out, means when I remove my mouse from over button, then Button 2 should fade out gradually which will automatically make Button 1 fade in gradually.
I could not find the "Out" event just like we have "Over" event for Button, so I assume this can only be done using ActionScript somehow.
Let me know if I am going correct with my assumption, and possibly if you could help me achieve the remaining half(fading out gradually when mouse is removed from the button).
Thank You once again for your reply.
Thank You,
Saurabh Khanna. -
Hi Folks-
I have a few questions. I am developing a course with mostly
text and images and am stuck on a few things:
1. Some of the screens seem to fade out before the reader
clicks next.
2. Sometimes the reader has to click next twice before the
slide changes
3. I have copied and pasted text from a word.doc and the line
spacing isn't consistent or even throughout, any sugggestions? I am
contemplating creating power point slides and importing them to
solve this problem. Do you think that would work?
Thanks.Hi Joan and welcome to our community
Questions:
1. Does this only happen in Internet Explorer (IE) or does it
happen in all browsers?
2. If it only happens in IE, for the movies that are
exhibiting this behavior, have you simply tried hovering the mouse
over the movie before trying to click the button? If so, so you see
a little yellow "tooltip" appear that says something to the effect
of "Click to activate and use this control"?
If this is the case, it's a result of a change in behavior
that Microsoft was forced to make to the way IE handles content
such as Flash files. Again, if this is the case, the first click
"activates" the control. (basically patting Internet Explorer on
the head and telling it that the world will, in fact, NOT come to a
fiery end if it shows you the active content). Subsequent clicks
should be interpreted as they should be until a different movie is
loaded up. Then things start over.
Hopefully this helps... Rick -
It seems that the browser backgrounds itself, once I tap on the page the tab bar becomes active (ie. it's no longer faded out) and I can use my space bar or touch pad to continue scrolling down the page again.
Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
Bought my son IPOD Nano for christmas. It turns on but then when you try and scroll nothig happens. Then the screen fades and goes black.
Anything we can do to correct this? Battery shows 3/4 full but I am reading that the battery icon is not always accurate? Also, see suggestions to try a different USB port? Uh, how do you do that if you only have on computer and one port?
Sorry, I am ignorant and technologically challenged.Hi,
Welcome to Apple Discussions
Try this link:
Resetting iPod if it appears frozen or doesn't respond
or this one:
Restoring iPod to factory settings
Regards
Colin R. -
Have downloaded the setup file from your site and from another - slight difference in file names - yours ends with (1) at the end - magazine version does not have that. All extraneous programs closed during attempt.
Have downloaded the setup file from your site and from another - slight difference in file names - yours ends with (1) at the end - magazine version does not have that. All extraneous programs closed during attempt.
-
How to fade a symbol instance out and in on the Timeline
I am using Flash Professional CC 2014 on a Mac running Yosemite. I am a Flash novice.
I want to fade out the oval and photo, then fade it back in. Any help would be greatly appreciated.... thanks in advance!
- GordieIt's a pretty straight forward process. Make sure whatever you want to fade out is on it's own layer. Select the layer on frame you want it to start and hit F6. That will create a keyframe. Then go to the last frame of the frame reange and create another keyframe (F6) Finally go to the spot you want it to fade out and select that frame and also hit F6. Now click the middle keyframe again and right click on it, then select Classic Tween. From there you can go to the properties box which should be on the right sides there. If not you can go up to Windows>Properties and the box will show up. Once in the Properties box simply select Color and then select Alpha from the pull down menu and slide the slider to 0%. Now when you play the timeline (Enter) it will start full 100%, fade and then fade back in again. If you want to have the picture stay full 100% for a bit then fade then fade back up and then stay that way you would create two keyframes for as long as you want the pic to stay 100% and THEN create your keyframe to turn the alpha to 0% I hope this helps! for what it's worth you can find a lot of tutorials here: Learn Flash | Hexjibber
-
How to fade in and fade out buttons ???
Hi guys I am building a website and I need help to fade in/ fade out buttons. Here is an example :
My main goal is that when I roll over the services button, I want the submenu (corporate and weddings) to fade in. Then when I roll over the portfolio button, I want the first submenu (corporate and weddings) to fade out and the second submenu ( clients, corporate, weddings, etc..) to fade in and to stay like this. Finally when I roll over testimonials, the second submenu fades out. And so on for the rest of the buttons.
FYI, i know how to animate the buttons to fade in/out but i dont know how to make them fade out when i roll over the other buttons.. I know this can be done with action script but I have no clue how...
I have attached my fla and swf.
http://www.habouryentertainment.com/files/site09_help.fla
http://www.habouryentertainment.com/files/site09.flw
Your help would be greatly appreciated !!!
ThanksSome things you just have to take the time to unravel and learn. It's not difficult/complex, you just have to avoid letting the code overwhelm you by its appearance... instead of looking at pages, look at one page at a time, line by line... take your time and follow a tutorial.
People make tutorials to help those that need to learn, so there's no reason for anyone here to reinvent those wheels for every person that comes along. If you are looking for someone who'll hand you your solved design, sorry, I'm not that guy.
Maybe you are looking for
-
Hi ALL, Is there anyway to send alert when the file is not avalible in the sender system, meaning we can see tht message not got created in the file communcation channel monitering after running based on avalibility time planing(ATP). can we send any
-
This happens after we upgraded from 11.1.1.2. The reports have not been changed after the upgrade.
-
GetSymbolTypeName() is not working after the update??
i just updated into the latest version of Edge. i was debugging when i found out that getSymbolTypeName() is not working anymore. any solution to this?
-
Where's the iPod w/ bluetooth? Why isn't this a big thing?
What's taking so long for someone to come out with a mp3 player with stereo bluetooth? cell phones got it, so it can't be a size issue, what's the deal? that would be the coolest thing since the iPod. seems like it should already have it. but i guess
-
Hello, I am trying to upload .txt file using FileUpload display class in a Form and save it somewhere on the server. I am using FileUpload display class in form but that uploads the file as .tmp to Tomcat's temp folder with a randomly generated name.