Fade out the web page??

I have seen this effect all over the web but I do not have a
clue as to how to do this.
See this page here
http://www.suncreekmusic.com/product_info.php/cPath/44/products_id/1082
Then when you get on that page click the link in the upper
right, under the picture of the guitar strap that says "click to
enlarge" to enlarge the image, the effect happens when you click
the link. Its like the page fades out and another small popup
appears in front of it. Any ideas how this is done?
Thanks a lot!

Litebox Image Gallery
http://www.doknowevil.net/litebox/
--Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
"texjgc" <[email protected]> wrote in
message
news:g7d8rd$o0t$[email protected]..
> I have seen this effect all over the web but I do not
have a clue as to
how to
> do this.
>
> See this page here
>
>
http://www.suncreekmusic.com/product_info.php/cPath/44/products_id/1082
>
> Then when you get on that page click the link in the
upper right, under
the
> picture of the guitar strap that says "click to enlarge"
to enlarge the
image,
> the effect happens when you click the link. Its like the
page fades out
and
> another small popup appears in front of it. Any ideas
how this is done?
>
> Thanks a lot!
>

Similar Messages

TS3798 I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.

I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.

amarilysfl wrote:
"Your disk could not be partitioned. An error occurred while partitioning the disk".
https://www.apple.com/support/bootcamp/
If you were using Apple's BootCamp and received this message, quit it and open Disk Uility in your Applicaitons/Utilities folder.
Select the Macintosh HD partition on the left and select Erase and Erase Free Space > Zero option and let it complete (important) this will check the spare space for bad sectors that can cause issues formatting partitions.
Once it's completed, try creating a partiton again in BootCamp.
If that doesn't work, then hold command option r keys down while connected to a fast internet connection, Internet Recovery should load (spinning globe) and then in that Disk Utility, select your entire internal drive and click > First Aid > Repair Disk and Permissions.
reboot and attempt Bootcamp again.
If you still get a error, it might be that you have OS X data on the bottom area where BootCamp partition needs to go. This would occur if you had the drive or computer for a long time or wrote a large amount of files to the drive and nearly filling it up and then reduced some, but it left traces in the area BootCamp needs to go.
To fix this
BootCamp: "This disc can not be partitioned/impossible to move files."
How to safely defrag a Mac's hard drive

I have developed one website and provied print fuctionality to print entire web from , but it is not printing the web page correctly, even in print preview it is showing wrong out put

i have developed one website and provied print fuctionality to print entire web from , but it is not printing the web page correctly, even in print preview it is showing wrong out put...

Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. 
http://forums.mozillazine.org/viewforum.php?f=25 
You'll need to register and login to be able to post in that forum.
Make sure you provide the URL for the problematic page, so they can see the problem for themselves.

I am connected to my remote server and "put files" but the web page files do not update, whats going on?

I really can't figure this out:
So I use a different computer at school for web design, I bought Dreamweaver to work on it at home, I get the files fine from the server that I uploaded at school but then I make changes at home computer and connect and "put" them and I check online and the web page doesn't change one bit.
I don't have the exact file extensions from the computer at school but when I connect and get I have a similar folder(s) set up and then it downloads them into Dreamweaver file manager box and makes the folders there I downloaded. The site shows up fine in Dreamweaver after I "get" so great I thinking.
But... not so fast, I change the page in Dreamweaver, preview n a browser and look right on so I "put", connect to server and upload. Then I check online an its still the same I uploaded the CSS and HTML and dependent files by dragging over and also using the up arrow "put" as well but nothing changes on the web page online.
What is happening here I am so confused?
Thanks a bunch, I mean I can still preview as I go but I really curious why my "put" files don't change my web page like at all!

Have you tried refreshing the browser, or deleting the browser cache?

Can I print out the source pages for hyperlinks in a pdf

http://www.stratishealth.org/documents/ClinicLinkJuly14_R.pdf
I have Acrobat X Pro. I've created the above PDF that shows hyperlinks as a clickable "Read more about it...." link. A reader has asked for a PDF that she can print out, yet it would somehow show the actual URL address that the "Read more about it..." link goes to. Anyone know of a way I can provide her with this?
Also, I thought I had found a way of printing a PDF and Acrobat would "grab" the actual web pages I've hyperlinked to, but I can't find any such functionality. I'm beginning to think I dreamed it.
Thank you,
Katharine

Took a look-see at the PDF. In all fairness it is the reader's responsibilty to create the PDFs for the web content at the "read more" link's end.
That content is not "yours" (you don't have the authoring files and don't deploy the web content).
The reader(s) who want PDF can use Acrobat to create PDF from the web pages.
Anyone with Acrobat Pro can use the application's "web capture" feature.
Takes time and doing it in your case is likely not what you get a paycheck for.
Time spent on it is time not spent on the job's "main thing" eh.
As well, other's web content Changes! Are you going to check the targets of the links every day, once a week, or .... how often? Changed content = new PDFs via web capture and distribution of same. How does that play to legalities?
All and all, it gets ugly fast.
But then it is your call eh.
Be well...

JSF - Read a text file and diplay lines of text data on the web page

Hello,
For one of my projects, I need to display lines of text data on the web page using Java Server Faces Technology. The raw data could be from simple text files or sockets or anything. (Getting the data is not my issue but displaying is). Could anybody send answers with sample code. In servlet, one could do this by -
public void doGet(HttpServletRequest request, HttpServletResponse response)
throws IOException, ServletException{
PrintWriter out = response.getWriter();
out.println("<html>");
out.println(DATA);
out.println(DATA);
out.println("</html>");
I am looking for similar solution.
Thanks in advance
DK

Thanks mjolinor. Works great!
Two questions.
1. Could you plz suggest how this could be modified so this code would read the file in or accept it from the pipeline instead of wrapping the (@' around the data?
2. Could you plz briefly describe some of the details of the code so I can further research and understand.
Thanks for your help.
Thanks for your help! SdeDot
1. It already reads in the file. The (@' .. '@) bits are just there to create a file using your test data to demonstrate that it works.
2. Not user what kind of "details" you want. There really isn't much there, and get-help on the cmdlets used should provide information on what's going on with them in that script.
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "

How to check the properties or the source file or the HTML coding of any particular link on the web page?

Earlier when I wanted to see the HTML coding of any link on the web page, I was able to see it but now I am not able to do that. Like earlier I used to right click on the link and there was an option of "View Properties" through which I was able to view it but now no such option is coming. Can you please help me out with this as I am facing many Problems?
== This happened ==
Every time Firefox opened
== from around 1 month

Install the extension at https://addons.mozilla.org/en-US/firefox/addon/14228 for that.

FF not printing right hand side of the web page using MAC OSX

FF is not printing out the right hand side of the web page. 1/2 to 1 inch i text is just cut off. Never had a problem in the past with this. Just happened, I believe after I upgraded FF. I am using MacBook Pro OSX.
== This happened ==
Every time Firefox opened
== I believe after I download the new FF update

Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.4; en-US; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8
I have had problems with Firefox printing pages through most of the Firefox versions. I have tried printing in different ways to no avail.
Among my attempts:
printing to pdf, printing selected text, scaling down the page, using the print mode if the art. offers one. None seem to fix the problem.
Not only does the right margin text get cut off but oftentimes only the first page prints, the rest of the article doesn´t. It just happened again so I went to Safari and the problem disappeared. I believe there´s a serious problem here.
Below see a shot of what the preview of a 12 page article becomes when printed.
http://www.npr.org/templates/transcript/transcript.php?storyId=128222247

I have been duplicated charged in my credit card on 7/6/2012, when I called in the phone the machine send me to the web page, but i need to talk to somebody

I have been charged twice on one of the 3 purchases I made on 7/6/2012 for the Bejeweled Blitz, (1) $4.99, (1) $9.99 , and (1) $4.99. My credit card has been charged for (1) $9.98, (1) $9.99 and (1) $9.98, which totalizes $29.95 instead of $19.97. When I tried to reply from your notification receipt, it does not connect me with your store, it says... Failed... When i tried calling the number showed in my credit card 1-866-712-7753 it comes a voice mail saying that I have to use the web page. Please credit my account as it should be and send me an e-mail confirmation. Thnaks.

We are not Apple employees here, just other users like you. You will have to contact iTunes in order to get this straightened out. We cannot do anything for you.
Try here.
http://www.apple.com/support/itunes/contact/

Safari lion has small window that scrolls up from the bottom of the web page

Since up grading to Safari Lion (6.0.2) I get this window creeping up from the bottom of the web page.
That little window asks "searching for ....what ever I've typed in my google search engine...." and slowely scrolls up from the bottom of the web page. If I click just right on it it goes away to reappear on the next web page. If I click anywhere on it though it redirects to a rxlist page or some health page etc. Not related to my search at all.
Also, since upgrading the following have been recurring and prominate pain in the necks
1) I can't scroll down on the page using my mouse. Only with the up and down arrows
2) Sometimes when I type a querrie into my search engine line at the top of the brower, it auto redirects to some radom website. Again usually rxlist or vibes caster shop.com etc etc. It does not happen 100% of the time but 80%
3) When I am typing in my search querries, I can't backspace to delete. I have to highlight and retype the entire search.
4) i know I'm going to sound crazy but if I search in google for "safari ... problems" etc. all problems go away and I can surf to my heart's content. It's like as soon as I start complaining it knows and auto corrects!!
FYI I always delete all history, and cache using the "reset safari, and the develop tab and then empty caches.
Do I have a virus of some kind? What do I need to do? Anyone have similiar problems?
Thanks a million in advance for any of your help.
Kevin

Check out TonyE's answer found here: 
https://support.mozilla.com/en-US/questions/804377#answer-158895
He pretty much says you should install the Status-4-Evar addon: 
https://addons.mozilla.org/firefox/addon/status-4-evar
Once you install it, check its options and there should be a setting to turn off that small popup box. And I don't think you have to do the about:config part, that setting affects other popups that you probably want.

HT5364 Safari is not displaying the web page content & Crashes on clicking Security Tab in Preferences!

I have Mac 10.8.4 with Safari 6.0.5.
Safari is not displaying the web content but images on the web page are being displayed.
Although the webpage is loaded, but nothing is shown else than Images. When I hover the mouse on the blank webpage shown, the cursor changes on the links on the web page.
I tried resetting the preferences from the menu as well as deleting the Preferences of Safari from ~/Library/Preferences/ but nothing helped.
When I open Preferences of Safari & click on Security tab, It Crashes!!
Thanks,
Shubhi

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Hey...... my ipod touch 2g wifi dose not work.... it connects to the network but does not open any of the web pages or internet acess!! HELP ME???

Someone plz help me out with this problemm... My IPOD TOUCH 2G connects to the wifi network but could not open any of the web pages... i've tried SAFARI, FIREFOX, and OPERA.... nothing in wifi retrieves data!!! it makes me so angry...
possible reasons???? i've searched net.. and many of the people r having these problems... maybe with the ne iOS4.2.1
HELPPPPPPPPPPP????
...Fateh

- Reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Power off and then back on your router
- Reset network settings: Settings>General>Reser>Reset Network Settings
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections
- Does the iPod successfully connect to other routers?

Sorry, we could not complete the operation. Please try again later or reload the web page

I am a bizspark member and wanted to signup for Azure.
I did phone verification part and when I sign up I get this error
Sorry, we could not complete the operation. Please try again later or reload the web page
Same happened with my colleagues ones too. But 2 invites got accepted after reloading the webpage for 100+ times. I am loosing my patience here. I have seen others getting this error as well. Do you guys have any idea how irritating this is? Azure support
is also not responding properly. Its a big headache for developers like us.
When will you solve this issue? And I want an correct explanation why this error occurs. Don't tell me to clear cookies and cache. I've done everything. Tried different browsers.

Hi,
It seems there is something wrong with your sign up process, sorry for the inconvenience, this is technical forum, the account issue is out of our range, please follow steps below to contact with azure support, it's a best choice for you.
Get the support channel at:
http://www.windowsazure.com/en-us/support/options/
If you have any other concern, please feel free to let me know.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

TS1398 I can't access to the web pages thro' Wi-Fi, after switching on the wi-fi.But if I switch off the iphone andswitch on the phone then I can get the web pages.Daily I have to repeat this process to access the web pages.help to solve the problem.

I can't access the web pages thro' wi-fi,But if I switch off the phone and thenswitch on the phone again I am able to access the web pages.Daily I have to repeat this process.help to solve this problem.

Does using 192.168.1.1 get you to the web page?
Firmware Update Process
To safely update FW, I recommend doing the following: Download the FW file from the support site first.
Disable the auto update feature on the router.
1. Save router config to file first using IE or FF with all security add-ons disabled.
2. Factory reset the router with all other devices disconnected or turned OFF accept for 1 wired PC.
http://kb.linksys.com/Linksys/ukp.aspx?pid=80&app=vw&vw=1&login=1&json=1&docid=9d2ff02077f645679972a...
3. Reload or Update the FW using IE or FF. Just download the FW file to your local wired LAN PC.
http://kb.linksys.com/Linksys/ukp.aspx?pid=80&app=vw&vw=1&login=1&json=1&docid=0a6881b90224439b92c8d...
4. Factory reset the router and then set up from scratch first using the local log in link and test with out loading the saved config from file. Check to see if any problems are fixed before loading the saved config from file. Sometimes you need to set up from scratch with out loading the saved config file. Just safer that way.
PC Web Browser Configurations
What browser are you using?
If IE 8, 9, 10 or 11, set compatibility mode and test again.
Disable any security browser Add-ons like No Script and Ad-Block or configure them to allow All Pages when connected to the router.
Clear all browser caches.
Be sure to log into the local log-in account on the router first.

The web page states, "are you sure you want to navigate from this page" It then keeps on logging me off of web site

The web page states, "are you sure you want to navigate from this page" It then keeps on logging me off of web site

This issue can be caused by Facebook gadgets. 
You will have to check that out by removing each of them until you find the culprit. 
If you added or updated gadgets recently then start with those.
See:
* [[Troubleshooting extensions and themes]]

Fade out the web page??

Similar Messages

Maybe you are looking for