Fade photos into eachother?

Hi
I have 26 pictures that I want to fade into eachother but I
dont want to keep them on a single timeline.
I want each photo be on a keyframe and make the fade in its
own timeline.
But how do I do this. I mean first picture movie on keyfram
one.. then second picture movie on keyframe 2 and so on.
Do I stop each keyframe? And how do I jump to keyframe 2 from
the movie on keyframe 1?
Do you understand what I mean?

I am very slow.. I did not get it to work..
I dragged all the pictures into the stage.. and added just
two pictures ... first on frame 1 and frame 2
But the images is only blinking...
No.. I did not understand.... the help..was not help for
me.... GOD I FEEL like a jerk!

Similar Messages

  • Photos into iMovie: yes, it's been addressed, but...

    ... I can't find exactly my issue, at least not recently.
    Many of the posts on this topic seem to be about exporting to iDVD, but that's not my problem. It starts earlier. My photos get compressed and look terrible as soon as they're imported into iMovie. I have '09, but the local Apple Store didn't think upgrading to '11 would help, because -- such as I understand -- a single large photo is much bigger than a frame of video or something more or less like that.
    Now, I pretty much just want to do slideshows, high-quality slideshows, and I don't even care about Ken Burns effects. But before you say: DON'T do this in iMovie! That's not what it's for! Do it in something else! Consider:
    -People I know who use Final Cut Pro (which is more than I want to invest, anyway) say that it, too, has problems importing and manipulating photos. No one I know has Final Cut Express to play around with, and there's no Free Demo, obviously.
    -I've now dabbled in both FotoMagico and Photo to Movie, and they seem to have some things going for them, but I can't seem to control audio in them as well as in iMovie, and that's a huge problem. I need to control fades precisely, and I need multiple audio tracks to layer and cross-fade.
    -Other programs I've dabbled with, such as Aperture 3 and Sounds Slides, also have limited ability to manipulate sound and/or adjust the length of individual slides.
    -One responder in a forum last year named Klaus  suggested an elegant work-around: create the slideshow in Photo to Movie (which he uses) or FotoMagico (which he guessed would work ok), and then bring it back into iMovie as a .dv video clip for sound editing and finishing. I tried this, but P2M compressed the images when I saved as a .dv (back to square one), and I couldn't figure out a way to export in FM that iMovie would recognize.
    So . . .
    Is there a better way to import photos into iMovie to preserve integrity? (I don't think so)
    Is there a better way to export video out of FotoMagico or P2M into iMovie?
    Is there something I'm missing about their sound editing capabilities?
    Can Final Cut Express do what I want without much more excess capacity than I need and a huge learning curve?
    Are there any other programs?
    Klaus, Bengt, others -- please weigh in!!!
    Thanks, Danke, Merci . . .
    Fred

        Understanding your data use is important, Rustyhinges! There are many things that can factor into a sudden increase in data. Thank you for ensuring Facebook Video is off. You can also view which applications are using the most data by going to Settings, Data Usage and scrolling to the bottom. As Android_Optimizer mentioned, making sure the device is not syncing to cloud services and restricting background data are great steps to keeping the phone data use, controlled. Please let us know if you have further concerns on this. Thank you.
    TanishaS1_VZW
    Follow us on Twitter @VZWSupport

  • If i download my photos into iPhoto does that use up more hard drive space?

    If I download my photos into iPhoto does that use up more hard drive space on my mac?

    iPhoto and Lightroom are similar apps - although LR is a far more capable app - and that the price it should be, of course. But the two apps are similar in that they both offer
    Photo Management
    Non-Destructive Processing
    So, essentially, they both play the same part in the workflow.
    The procedure would be to
    Download the images from the camera into the Photo Manager (regardless of which one you choose)
    Review and select in the Manager
    Trash the unwanted with the Manager
    Process the images - that is, in most cases edit them.
    It is at this point - and only this point - that Photoshop might come into play. Both of these apps can act as a 'front-end' for Photoshop - after all, they're the Managers. But in truth, if you're using Lightroom then you very likely do not need Photoshop at all, and for anything that does require layers you can use one of the many - much less expensive - alternatives. But I think the common experience is that with Lightroom (like Aperture) the requirement for the sledgehammer that is Photoshop really fades away.
    So pick one horse and ride it. Choose between LR and iPhoto. Use it like it's intended. Don't get involved in other necessary apps. Don't review before bringing the photo into the manager - that's what the manager is for.

  • How do I move imported photos into an existing album in photos

    I have a large collection of photos in iPhoto, arranged into events and albums.
    If I now import from my camera i open up photos, not iPhoto.
    After importing images how do I add specific images to one, or more, of my existing albums.
    If I close photos and open iPhoto I can still import to iPhoto but the images do not appear in photos.

    peterfromrotherham wrote:
    After importing images how do I add specific images to one, or more, of my existing albums.
    Enable the Sidebar if it isn't showing (View menu > Show Sidebar), then drag the photos into the album icon on the sidebar.

  • After sorting photos into albums, the albums disappeared on me. I dragged and dropped the photos and went back to check that they were in place before exiting the program. When I went back, the folder was there but no albums. Help!

    Working on an IMac - with IPhoto v.9.6 
    This is my first experience with IPhoto... trying to move files from a PC over to a Mac.
    I don't have a ton of photos but I created about 6 albums - standard albums - and dragged and dropped individual photos into each of the albums. I named each of the albums as well so I would know what was in each. After i was finished, I created a folder called 2014 and moved each of the albums into that folder. Before moving ANY of the albums, I opened each of them up to make sure that all the photos I wanted in each were indeed there - and since there were some errors on my part, I deleted any duplicates first. SO, I KNOW the photos were actually in each of the albums BEFORE i moved them into the 2014 folder.
    My intention was to then delete the photo files in my document file but once I got there I thought I would go back and double check the IPhoto file just to make sure... and the pictures were NOT in the albums where I had placed them... is there a need to save this before you move on and if so, to where and how? I was under the impression that once files were moved to albums, they remain there.
    The photos are still in the photo library but unsorted now again... I cannot even open the 2014 folder at this point.
    Thanks for any help!!

    Was back on IPhoto this morning. The folder did not open at all so I deleted it. Beside Albums, nothing showed at all. It was like I had done no work at all except to import my photo folder. Nothing was in my trash bin either.
    I started again and created one album at a time. I dragged and dropped photos into the album and exited out of IPhoto, opened up other programs and then returned to IPhoto to see if the album was still there and it was this time. I created a second album and did the same thing. This time, for some reason, the albums seem to be staying in place. I am not doing anything differently than last time. After creating three albums, I created a folder called 2014 and dragged and dropped the three albums into the folder and exited IPhoto. They were still there when I returned - YEAH! It seems to be working - for now! I am keeping my fingers crossed that my photos are not going to disappear but I am not going to delete my photo folder from my files just in case!
    Thanks for the suggestions but this may just have been a funny glitch... not sure what happened. I didn't change anything or do anything differently this time except that I am doing it one album at a time and exiting the program between creating each of them and coming back to check... very strange.

  • I am trying to transfer my photos from old mac to new mac.  I copied the iPhoto library to an external hard drive, then imported it to the new iPhoto.  It turned my 2000 photos into 12,000!!  What happened?

    And how do I turn off FACES? 

    I copied the iPhoto library to an external hard drive, then imported it to the new iPhoto.  It turned my 2000 photos into 12,000!!
    According to you youo did not do what I instructed - you said you imported the old library into th enew library which can easily take a 2000 photo library and turn it into 12,000 including two ro three versions of each photo pus all the face thumbnails
    The correct procedure has NO importing involved
    drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac
    That is it
    LN

  • Can I reimport photos into iPhoto Library?

    Hi, I unticked the Copy photos into the iPhoto Library so the photos are residing in an external folder now. Can I change my mind and reimport them into the iPhoto library and will this affect the albums, photobooks, and slideshows I've already created? i.e. can I rebuild this library with photos inside the library?

    Can you hack an SQL database? If so, this user reckons he managed to do what you want:
    https://discussions.apple.com/thread/3216539?tstart=30
    Alternatives:
    This should work: Set the app to Managed Mode and Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Failing that: Start over from scratch.
    Regards
    TD

  • Can I organise photos into albums within iCloud Photo Library?

    i Understand that edits / deletes etc in iCloud Photo Libary will be reflected on all my iOS devices but can I organise my photos into albums using iCloud photo library?
    basically I want to take photos on my iPhone, review them on my iPad, delete the ones I don't want and keep the good ones in a relevant album (e.g. "Summer holiday 2014"). Then I want to be able to see identical albums on both my iPad and iPhone. From what I've seen so far, when I create an album and save a photo to it then that album is only local to that device?
    please help.

    Are you saying it showed 800 photos before turning off iCloud photo library or that the 800 photos disappeared after you enabled iCloud photo library for the first time, the distinction is quite important.

  • How can I move part of one photo into another photo?

    In older versions of Photoshop you could see two or more frames in the work area and cut an paste parts of one photo into another photo by using the "move" tool after the area to be moved was selected. I am having trouble discerning how to achieve this action in CC. Could someone in the forum with this experience give me some steps to take to complete this process? Thanks.

    Thanks Trevor!
    Bill Coan (BillCoan Photographs)
    Moravian Falls, North Carolina
    336-928-0498 (c)
    336-903-8674 (h)
    On Mon, Jun 16, 2014 at 6:48 PM, Trevor Dennis <[email protected]>

  • How do I import or move multiple selected photos to an existing album in iPhoto 9.6? In previous versions I could select and drag multiple photos into an album. Now I can only move one photo at a time. Help!

    How do I import or move multiple selected photos to an existing album in iPhoto 9.6? In previous versions I could select and drag multiple photos into an album. Now I can only move one photo at a time. Help!

    Try this general troubleshooting procedure:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete the contents the following folder: User/Library/Containers/com.apple.iPhoto
    3 - reboot, launch iPhoto and try again.
    NOTE: For Mavericks and Yosemite,  go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
    where you can check the Show Library Folder checkbox.

  • Can I moved flagged photos into an album on the iPad?

    Hi there,
    While on holiday I used my iPad to backup photos from my camera and I used the flag system in iPhoto for iPad to mark which ones I wanted to share. The problem is I can't see a way of moving the flagged photos into an album so I wanted to find out if it is actually possible to do this on the iPad.
    Additional info:
    The photos were uploaded onto the iPad using the native Photos app and have been flagged in iPhoto
    The photos are also on my iCloud account
    Neither the flags nor editing applied to the photos have synced after iCloud has been updated on my Macbook
    Due to the above I am unable to create a Smart Album based on flagged photos on my Macbook
    In iPhoto for iPad I cannot see the filename so I am unable to discern which images to flag on my Macbook to utilise Smart Albums (I have a lot of very similar photos)
    Any help would be much appreciated as this is incredibly frustrating.

    There is not yet a simple solution to do what you want.  The new Photos.app in iOS 8 will bring a much better integration between iPad and Mac.
    I just don't understand the point of being able to flag, favourite or tag item on the iPad  if you can't organise them into folders or easily share them between Apple's own apps.
    iPhoto on the iPad is simply not yet as flexible as iPhoto on a Mac.    It is not meant for syncing libraries between Mac and iPad. You can share photos, but not albums. And the central sharing place with other apps on the iPad is the Camera Roll. To make photos valuable in other apps, share them to the Camera Roll.
    In iPhoto you cannot create albums like in the Photos.app. Only smart albums based on tags. If you add a tag "Flower" to some photos, you will automatically create an album "Flower". But again, these tags will not be transferred to your Mac by the Photo Stream, you will not see them in iPhoto on your mac.
    If you want to transfer the edited photos using the Photo Stream you have to add them to the Photo Stream after editing, and that requires to save them to the Camera Roll.
    You could use a shared Photo Stream, but that will reduce the size of the photos.  Or select the flag photos and sync them to your Mac using iTunes Photo Sharing.  http://help.apple.com/iphoto/ipad/2.0/#blnkee26bc1f
    Save photos to your computer using iTunes
    Connect your iOS device to your computer.
    Tap a photo, album, event, web journal, or slideshow and tap > iTunes.
    Tap Selected, or change the photos you want to save (if you are saving a slideshow skip to step 4):
    Select different photos: Tap Choose Photos, tap one or more photos, and tap Next.
    Select a range of photos: Tap Choose Photos, tap Range, tap the first and last photos in the range, and tap Next.
    Select all the photos in an album or event: Tap All.
    In iTunes, click the button for your device and click Apps at the top of the window.
    Below File Sharing, select iPhoto (in Apps).
    Select the Shared Photos folder under iPhoto Documents.
    Click Save To and select the location on your computer where you want to save the items.
    To view your photos, go to the Finder and look in the location you selected above.
    I am using the iPad mainly to browse and show photos in slideshows, but not, to organise and tag them. That I will do on my Mac.

  • I have alot of loose photos at home (old) and I would love to make a bunch of iphoto books and make the pages like whole page collages?  How do I get my photos into iphoto in order to do this?  Can I make a DVD at the drugstore and add them to iphoto?

    I have alot of loose photos at home (old) and I would love to make a bunch of iphoto books and make the pages like whole page collages?  How do I get my photos into iphoto in order to do this?  Can I make a DVD at the drugstore and add them to iphoto?

    You can make the collages easily if you have iWork.  Just open a letter sized page in landscape mode and drag the photos onto the page, rotate and postiion as necessary.  Then do a Print ➙ PDF ➙ Save PDF to iPhoto to get a 200 dpi jpeg version of the Pages page into iPhoto.  From there you can add it to your book and use a blank page with the option to have an image as the backbround. 
    If you have a 3rd party image editor that supports layers you can create the collage with it. 
    OT

  • How do you move new photos into existing albums?

    On an iPad how do you move a new photo into an existing album?

    Or, from the camera roll:
    Tap Select (upper right hand corner)
    Tap the pictures you want to add to an album (you'll see a check mark in each selected photo)
    Tap Add To (upper left hand corner)
    Your albums will appear and touch the album you want to move the picture to and they'll go there
    Note:  They will stay in your Camera Roll as well

  • How do I move a photo into an album in the new Photos application?

    How do I move a photo into an album in the new Photos application?

    The simplest way is to show the Sidebar at all times - you can reveal it with options-command-S  ⌥⌘S.
    With the sidebar visible, you can simply drag the photos from the Moments or other albums to the album in the sidebar. You can select and drag multiple photos at a time by selecting the first photo, holding down the shift key and selecting more photos.  If the album does not yet exist, select the photos and press ⌘N for "File > New album" to create a new album with the selected photos.

  • How do I insert multiple photos into an excel document vs inserting each individually?  Insert, Picture, From FIle...now what?  it only allows me to choose 1 at a time.

    Help - How do I insert multiple photos into an excel document vs inserting each individually?  Insert, Picture, From FIle...now what?  it only allows me to choose 1 at a time.

    https://discussions.apple.com/thread/3383532?tstart=0
    Stefan

Maybe you are looking for

  • Effects of reopening closed periods in Asset Accounting.

    Hi SAP Gurus, My client wants to open the closed periods in Asset accounting. I have used T Code OAAQ and changed the last closed period. I would like to know what are the effects of opening the closed periods. Will it effect the already posted depri

  • How to change the order of the columns in the Message List in Mail?

    In Mail, in the Message List, is it possible to rearrange the column order of Subject, From, Date, Attachments, etc? The upgrade to Snow Leopard changed the order of the above and I want to keep the old order that I had with Leopard. Also, there is a

  • Alt-arrow key to copy in CS2?

    It's been a while since I've been able to use Illustrator, and now I have gone from Illustrator 10 to CS2.  One feature I used to use all the time was to make copies of paths or objects by clicking alt and an arrow key at the same time. From what I'm

  • Very urgent report on FI

    hi all, please help. i have my code below , i am using bkpf , bseg tables extract data. my last intrnal table it_bseg is getting poplulated ,but the final o/p in grid is not getting displayed. wht 2 do?....please reply with suggestions which can enha

  • Can't paste into Dreamweaver CC 2014.1 after opening any browser on Windows 7 system...

    I couldn't paste anything in Design or Code view after updating to Dreamweaver CC 2014.1 this week on my Windows 7 system. I discovered that if I rebooted my computer and opened Dreamweaver without opening any browsers (have tried Chrome, Firefox, IE