Fade sound right-to-left not working?

I'm playing around with the sound properties to fade an audio
clip from one channel to another. When I select "Fade
Right-to-Left" and click on the Custom button to preview the sound,
there is a noticeable stereo effect of the sound fading between
channels. However, when I press Ctrl+Enter to test the movie, I
only hear the sound in mono, albeit slightly muted. I tried going
to Publish Settings and removing the "Convert Stero to Mono"
option, but that doesn't fix the problem. What gives?
PS. The sound I'm using is a 32kbps mono MP3.

Hasn't
anyone ever worked with sound effects before?

Similar Messages

  • Right speaker is not working in my g6 1201tx.

    I have a Pavillion g6 1201tx model and my right speaker is not working at all. When I switch the all balance to the right speaker, no sound comes from the laptop and shifting it to the left one or to the centre starts giving sound again. I have tried reinstalling the drivers but to no avail.I also tried removing the batteries and putting it back and running again; its not helping.
    The driver installed version is: 6.10.6341.0
    (IDT High Definition Audio CODEC)

    Not unless your Dad has a knock-off or a fake 3GS it doesn't. The first generation iPhone, the 3G, and the 3GS include a single speaker. The opposite grill that appears the same is the iPhone's microphone. If your Dad's iPhone has two speakers, where is the microphone located on his iPhone?

  • Sound on iPad is not working and I've tried all

    sound on iPad is not working and I've tried all.. Someone HELP me

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
     Cheers, Tom

  • I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you plea

    I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?

    You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. After you finish Setup Assistant will complete the installation after which
             you will be running a fresh install of OS X.  You can now begin the update process
             by opening Software Update and installing all recommended updates to bring your
             installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • My right click is not working. the context menu does not come up and i can no longer drag files/folders. I have checked the mouse and track pad in system preferences and the correct boxes are all checked (with a support member). Please can you help

    My right click is not working and producing the context menu or ability to drag files and folders. I just spoke with a phone support person and we checked that all the mouse/trackpad options for right click were correct and checked.
    Please can you help with this.
    It has only just happened in the last few days.
    Many thanks

    You might want to update your profile so that we can see what model iMac you have and what version of OSX you're running.
    For this question, it might help to know if you're dealing with a trackpad, Magic Mouse, or something else?
    (Until your issue's resolved, you can Control-Left Click to get the right click functionality).

  • My iMac mouse right click does not work now

    Hi all,
    My iMac mouse right click does not work now.  It was fine a couple of days ago. 
    Right click is definitely enabled, I have checked it several times.
    A Google search revealed that in Firefox it could be that I'm not using the latest version of Firebug.  I have auto updates on and Firebug is the latest version 1.11.3
    I use right click for correcting spell checked words, instead of a suggested correct spelling I get the 'open in a new tab' menu.
    In Firefox when I right click to open in a new tab I get the menu but it does nothing.
    It is driving me mad
    Any help will be greatly appreciated,
    Thank you
    P.S. thought it was suddenly working when I did the spell check in this post but it was the left click doign it....

    I don't use Firefox so I can't test it, but it might be something to do with a preference setting. Have a look at this link (ignore all the instructions), just look at the image of the preferences, there appears to be a setting in Javascript preferences relating to contextual menus. Check to see what your settings are:
    http://stackoverflow.com/questions/16377381/disable-firefoxs-silly-right-click-c ontext-menu

  • Why is the sound on my Envy not working?

    Why is the sound on my Envy not working?  Checked all volume levels, mute, settings etc.

    Hello NellyMac,
    You state you are not getting any sound from your laptop, is that correct? I will be happy to help you.
    Can you please provide the full make and model of the computer you have, If you are unsure where to locate that information have a look at this link for help if needed.
    Please respond back at your earliest convenience.
    Thanks
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • How to fix keyboard clicks and lock sounds when they are on in setting , sounds and still do not work?

    How to fix keyboard clicks and lock sounds when they are on in setting , sounds and still do not work?

    Double-click the Home button and swipe the Task Bar to the right. Check Volume and Mute Settings.
    Message was edited by: Diavonex

  • I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.

    I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.I have lost my resource cd .

    If you are running Lion or Mountain Lion, the drivers are downloaded from within Bootcamp Assistant. If you are running Snow Leopard the drivers are on your Snow Leopard install disk.
    Read the Bootcamp Install Guide for your version of OSx. http://www.apple.com/support/bootcamp/
    Bootcamp questions should be asked in the Bootcamp forum where the Bootcamp gurus hang out https://discussions.apple.com/community/windows_software/boot_camp

  • Right click is not working in Web dynpro explorer

    Hi All,
    I have SAP net weaver developer studio 2.0.9.
    when i right click on web dynpro components, to create a component, the context  menu is not coming, right click is not working.
    though right click works fine in diagram view and outline view.
    Please suggest what might have happened? and how to get back the settings.
    Cheers,
    Srini.

    Hello Srinivas,
    Try closing and opening NWDS. If you still see the same problem, simple solution for this is, Just Change Workspace to new folder.
    Changing workspace - Window -> Workbench -> workspace -> give new path.
    Close nwds and open it again. It should solve the problem.
    Thanks,
    Sridhar

  • I have a macbook air and I can't cut and paste in itunes.  The right clic does not work. How can I work this out?

    I have a macbook air and I can't cut and paste in itunes.  The right clic does not work. How can I work this out?

    Great tip Stephen!!
    I was so frustated from this issue that I used to use Windows iTunes for mass editing info, adding Lyrics etc and then transfering songs to Mac. This tip has alleviated my pain!!
    Thanks for the tip. This question should be tagged as answered.

  • Brand New Ipod touch 4th gen  right earphone jack not working out of the box. Bought at Wal-Mart yesterday. Are we missing something in the set up or should we return it?

    We just purchased an ipod touch 4th gen 8 gb from Wal Mart. OUt of the box the right headphone is not working. Tried numerous pairs of headphones..tried the mono settings and nothing is working. Is there a setting we are missing or should we just return it?

    If the headphone plug is fully inserted, I would return the iPod for a replacement

  • Right click problem: I did not know about the Yahoo sidebar issue, I have removed all toolbars from my browser from 'view' menu. There is nothing in my 'extensions' to disable. Right click is not working. What to do?

    Right clicking is not working on any of the websites. I read up that it's a Yahoo sidebar issue. But, in my extentions, Yahoo sidebar is not there. I had removed all toolbars, but from 'view' menu. Now how do I get my right click to work?
    == This happened ==
    Every time Firefox opened
    == I've noticed it on 1 Aug 2010

    This is a user-supported board. You are not addressing Apple here. Nor is it a good idea to post your private information to a public forum. You should edit your post immediately.
    Unfortunately no one here can access your support history. You must respond to the emails directly.

  • In "Show more Bookmarks" if I right click does not work (I want to open in a new tab)

    This is using Mac Firefox current version. I use lots of tabs and don't have space for all of them so there is a >> at the right end for clicking and displaying the rest of them. If I click and display list and highlight one of them, the right click does not work - I want to open in a new tab not use the existing - there are no menu options displayed on these tabs. The tabs across the top work fine for this

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
    * Help > Restart with Add-ons Disabled
    * Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • My sounds and audio is not working. it's not in mute. help please

    i need help. my sounds and audio is not working. but it's not in mute button.

    Hi,
    Can you post back with the following details.
    1.  The full Model No. and Product No. of your notebook - see Here for a guide on locating this information.
    2.  The full version of the operating system you are using ( ie Windows 7 64bit ).
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

Maybe you are looking for

  • Problem in creation of Excise Invoice.

    Hi Gurus, When i am creating a Domestic Excise Invoice- starting from a  Inquiry, the system is giving an error. The same error is not occuring for Export scenario. Can yo please help me in resolving the same.... <b><b>Account assignment cannot be ca

  • Purchase requiremnet& purchase order

    Hello, I want to know detail information between purchase requirement(PR) ,plan order and purchase order(PO) currently, I just open a PO and paste the required parts with qty into it ,and also paste the message of PR into one field named "Purchase Re

  • PSE9: renaming of folders in organizer very slow

    My problem: when renaming folders in the folder tree in PSE 9's organizer, it takes a long time for the name change to happen. It's easily 10-20 seconds. Is this a known phenomenon? Has anybody made the same observation (and found a solution?) Comput

  • IPod Classic Error when connecting - I cant put new music!!

    When i plug in my newish (6 month old) IPOD classic to the Mac it immediately tells me - "Mac OS X cant repair the Disc "... ipod". You can still open or copy files on the disc but you cant change or save files on the disc. Back up the disc and refor

  • Get Most Years out of Battery?

    From Apple web site and posts here I know: 1. Battery should be discharged and fully charged once a month. 2. Doesn't matter whether you use 10% or 70% of the battery before you re- charge it. 3. To make it last the longest, you should use it often.