Fade to Black: Getting a weird colour distortion.

Question for the gurus:
I'm on CS3 at the moment and working on some projects involving space scenes (stars and stuff).
I have a black rectangle as my bottom-most layer and change the fill to a simple black and white radial gradient effect and the black becomes kind of faded, or pale. I'm losing my mind trying to eliminate the problem and what's worse is that I've fixed the problem during a previous project, but can't for the life of me remember what I did.
Any ideas what's causing this and how to avoid it in the future?
Much appreciation for taking the time to read this!

The problem is solved. I don't know what caused it in the first place. However, when I change the colour from the faded black to another (i.e. red) and then back to black the colour is just fine.
Weird.
Thanks for looking in and trying to help!

Similar Messages

Weird colour distortion in OS X Mavericks

Hello
I got some weird looking colour distortion going on in my recent installation of Mac OS X Mavericks on my mid-2010 MacBook Pro. Any suggestions on fixing this? Is this a known problem? I only have it on some places in some occasions...
Here's a screenshot:
It's not my screen since I can take a screenshot of it...

Same problem - macbook pro mid 2010, 15 inch. I ran the AHT test, it showed nothing so I took it to the store I bought it at. It passed all diagnostics and they could not reproduce the problem (?!). Apple has refused to fix it as it is not currently viewed as a hardware problem. I brought the laptop home and within hours I have distortion on the top of the desktop and a thick black outline around the open window. I think this may be a software issue, within Mavericks, not related to the GPU/logic board/nvid/motherboard issues I've seen referred to in similar posts (I hope so, those hardware fixes all seem to be bunk). See link below.
http://9to5mac.com/2013/11/15/apple-seeds-first-os-x-mavericks-10-9-1-beta-to-de velopers-with-focuses-on-mail-graphics/

My iPad 2 screen has turned a weird colour. The background is black and the letters are white instead of the other way round and colour photos look like negatives. How do I change it back.

My IPad screen has turned a weird colour, the background is white and the letters white instead of the other way round. Colour photos look like negatives. How can I turn it back to a white background.

Dear Steve,
You are wonderful! You are the best! I'm Stephania and I recently purchased a refurbished ipad2. I've had it for about 3 weeks now and updating & fixing it so my liking. The only thing that I couldn't correct were the photos that looked like negatives. Every photo, even on the internet, on apps, everywhere! I just couldn't figure out how to fix it. I contacted Apple Care and its too difficult to get in touch with them. I had looked through support before but didn't put in the right question. Well, today I got lucky. I did the two things you suggested and turning the "White On Black" off did the trick. I'm so happy! I had a feeling it was something simple and this is not even in the manual!
stevejobsfan0123 wrote:
Try triple clicking the home button. If that doesn't work:
Settings > General > Accessibility > White on Black OFF.

TS1591 My iphone 4 randmonly started going into recoveery mode when i was trying to download ios 7.1, and now the apple logo will come one and then fade to black and continue this process. My iphone wont restore either and will get the 3194 error message.

My iphone 4 randmonly started going into recoveery mode when i was trying to download ios 7.1, and now the apple logo will come one and then fade to black and continue this process. My iphone wont restore either and will get the 3194 error message.Help please!

Hello chindeepchow,
Thank you for using Apple Support Communities.
For more information, take a look at:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694#3000
Resolve communication issues
Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200. These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
Have a nice day,
Mario

Can I get movie to fade to black?

I inserted a Youtube video into my project and used the slider in Widget, Interaction to stop it about midway through, the first part being all that I wanted to show. But then when I preview it, it simply stops abruptly and retains the last screen image. Is there a way to make it fade to black, other than going back and redoing it in iMovie?
Thanks.

James:
As always, feel free to use the 'Provide iBooks Author Feedback' menu item for features you'd like added in the future, etc.
http://www.apple.com/feedback/ibooks-author.html
Good luck w/your book(s) in any case

Weird colour shift on TV through HDMI

Hi,
I'm using my TV with XBMC to watch videos on my computer more comfortably, but even since I changed my computer the image get those weird shifts where it goes black for about a second, comes back on looking weird, then about 20 seconds later it's one second of black and then back on as normal again. But if I change channel on my TV when it happens, and then switch back to the HDMI channel corresponding to my computer, the image is fixed. I've tried timing this issue, and it seems to appear roughly every 20 minutes, but it can appear twice in 5 minutes, or not at all in 40...
Because an image is worth a hundred words, I took a picture with my phone during one of these colour shifts, here's what it looks like: http://img152.imageshack.us/img152/3284/imag0063gc.jpg . As you can see by the xbmc menu looking weird too, this is not the video's fault.
I've also tried switching the cable, but the issue remains. I've been using this setup for a while, but as I said, I changed computer recently, and part of this change was going from a nVidia card to an ATI one, more specifically a radeon HD 7870, and I'm using the official AMD driver (which is kind of required, since the free driver apparently doesn't support sound over HDMI for my card yet).
It's probably worth mentioning that my primary display, which is plugged in VGA, does not have this issue. Also, I have a Windows dual-boot, but I have yet to test if this issue also appears on Windows (which is kind of a pain to do, due to the randomness of my issue...).
I've tried googling this for days and have yet to find anyone reporting the same issue, but seeing how English isn't my native language, I might not have used the right keywords...
Because I guess this is relevant, here is my xorg.conf on pastebin: http://pastebin.com/2eWPKnt2 . This was generated using amdcccle, so it should be legit (though I do miss nvidia-settings, amd got some work to do on their GUI tool). Not sure if this is relevant, but just in case : to launch the computer on my TV, I use this xorg.conf (named xorg.conf.TV in my system), and start X with the following command (through an alias, of course):
xinit .xinitrcTV -- /usr/bin/X :1 -config xorg.conf.TV
And my .xinitrcTV containing the following:
setxkbmap fr
xbmc
xterm
So here I am, and I don't really have any idea what I could do to fix this problem... Any help would be greatly appreciated.

https://wiki.archlinux.org/index.php/KM … odesetting

Script causing fade to black

I'm having a weird problem that I can't seem to work around. Here's what I want to do:
I have a bunch of menus that have quiz questions on them (7 quizzes, each with 3-5 questions, 1 menu per question). If the user chooses the correct answer then they go directly to the track that introduces the next question. If they choose the incorrect answer then they jump to a script that adjusts their score and then jumps immediately to the track for the next question (the same one as above).
For the right answers, I get a nice clean fade transition that keeps my background image (which is common to all elements in the quiz). But going to the script first fades it to black before fading back up to the background.
One work-around would be to just make duplicates of the tracks (or of the background alone) to be used for right vs. wrong answers, and use pre-scripts that differ between those tracks to change the GPRM. But I'm up against that incredibly annoying limit of 99 tracks per project (why? why? why would they do that to me?) so I can't make enough extra tracks to solve the problem.
Another work around would be to create two tracks (one for correct and one for incorrect) that each just had 1 second of background and attach a massive pre-script to each that figured out exactly where the user was in the program, made all necessary updates in their scores. But I'm already using each menu twice for different purposes, and am also up against the limit of 99 menus per project (seriously, are they trying to ruin me?) so I can't duplicate those either.
Does anybody know of a way to work around this? Can I freeze the screen during a script or something? Or any brilliant insights into other ways to fix it? I am out of ideas!
Thanks!
Julie

I realized two things that helped me to figure out a work-around. First, I was confused about menus being limited to 99 (I was thinking of slideshows). In fact, menus are limited to 10,000. The other piece of information is that a track can go to a script which then goes to a menu and it does not fade to black (whereas the menu to script to track did fade to black). Who knows why. In any case, this allowed me to make things complicated but functional. It's much messier now, but at least it works.
Still, if anybody knows how to prevent the menu --> script --> track from fading out during the script, I'd love to know!
Thanks
Julie

Macbook pro 13 screen fades to black?

Does any other owner of a mid 2010 MBP 13" (puchased 2/11) have this weird problem: when the laptop is warmed up, the screen randomly dims then fades to black then in a few seconds lights up again. In addition, while the screen fades, the lights look like, oddly, stage lighting. I have already had the whole screen replaced (the whole top), but it still persists. On my next call to Apple Support they told me this is reported by others and "they are working on it" and to look for a firmware update. All fine and dandy, but I have frustration in the meantime. I and my family have been owners of many mac products since 1990. They are all great products and now that I have a real issue, I am banking on great support.

There are two other discussions about a similar topic. See if resetting the SMC helps...otherwise, the other recommendation is to take it in for service.
https://discussions.apple.com/message/21201499#21201499
https://discussions.apple.com/message/20639115#20639115

Why is it, if i have one video clip in the timeline, i can't just add a transition at the end of that solo clip to fade to black!?! please help!

hey there, so im making a video for a family event..
i drag in an audio clip all of a sudden this becomes the be all and end all, and i want to sync some vid clips to that audio track, so let's say i drag in a 10 second video clip, at the end of the 10 seconds, i want to add a transition to fade to black.. i go to the transition window.. choose the cross dissolve or fade to colour, but it will not allow me to drag it on that video clip.. it always ends up on the audio track. this bloody application is so confusing compared to final cut. please help!

Ahhh, now I see the problem, Grasshopper. Problem is, we are all Grasshoppers, here.
Yes, that little piece of info is critical. I'd say the biggest difficulty with FCPX is the whole new language.
If I read you correctly, your Audio is in the Main Storyline (Track 1 in plain old Editorese). This makes anything else you add (above or below) a "connected clip", which we can no longer think of as "Track 2" because Jobs sez so. So, yes, you cannot just add a transition to either end of a connected clip.
No argument with Tracy's solution, because I haven't seen any other general solution presented for any attempt to treat connected clips as the main storyline. And, of course, when they were "track 1" and "track 2", you could.
An alternative solution, however, is to highlight the connected clip and press Ctrl-V to bring up the Video Animation Editor. Click the "reveal button" for Compositing: Opacity (bottom, right). Once open, there is a "fade handle" to the right top. Drag it left for however much fade you wish. (there is one on the left as well, but you were only talking about a fade-out.)
A second alternative, perhaps for future projects where everything keys on audio, may be to create a Gap clip (used to be called slug) in the primary storyline before ever dropping in the audio. Then you can add video to the main story line and modify it without having to go thru hoops to do the simplest thing.

Mac pro keeps crashing/weird colours/unable to reset/wont boot

Hello. First some info. I have had my mac pro for 18 months. I am running OP system X 10.5.8. I have four 256mb ramss instaled(from purchase) and 250G hardrive.
Now for 17 months, everything has run fine. Until one day after switching accounts, I noticed weird red lines accross the screen and I could not click on anything. I had to use the power button to reboot and then everything went fine until the next morning, after logging in, I got the red/pink lines accross the screen again and I was unable to click on anything.
This problem went on for about a week but then things got worst. I was having to use the power button upto 4 times because when i tried to boot, it was stuck on a blue screen. This then became 6 times after a short while more.
Before long, i was at the stage where i would click on my account to log in and the screen would just freaze. After several reboots, i was able to get onto the account but the computer then began crashing(with the spinning colour wheel in the middle of the screen) and i could click on nothing.
I was thinking that my computer needed warming up or something but today, it has gone one step too far. Ive spent about an hour trying to get it on but everytime i click itunes/safari etc, i just get a frozen screen, often with weird colours. My computer is making horrible noises(like its downloading a song, if you get me) that do not go away.
Now, ive done a hardware test and an extended hardware test but nothing came up. I attempted to re-install the operating system but that ended up crashing just like my computer does.
For some reason however, i have booted in safe mode and there is not a single problem with anything. I can click on itunes etc etc and nothing crashes.
I have apple care, what do you think i should do now? Could it still be a hardware problem? How do i find out if it is a software error?
Any help would be fantastic

milesmartin, did you ever resolve this issue?
I find myself in almost the same situation. I have a Mac Pro using OS 10.6.1 with 9gb RAM and three hard drives. This happened suddenly at a cold startup for me. The strange red/pink lines, mouse not responding, etc. I could do a hard restart (power off) and the problem seemed to go away. I have tried many tests with TechTool Pro and the Apple hardware disk. All test show no problems with hardware. I have installed clean systems on a new hard drive several times including going back to OS 10.5. Each cold restart brings the same freeze, strange graphic displays. I reset the SMU, purged the PRAM, replace the battery, pulled/replaced all RAM modules, tried starting from the OS install disk. So far, nothing helps.
At the start of this problem, I could do a boot in safe mode. Now, nothing works and it may take 4 or 5 restarts to get the system up and running. This is most unacceptable and probably stresses the components in ways that will eventually cause a failure.
I am out of ideas today and it is no longer fun. Any help?

After screen replacement, top half of screen starts by looking normal but then fades to black while bottom half stays bright but with images blury. What might went wrong?

A friend recently gave me their old Macbook pro 15 because they broke the screen and the Apple store quoted them $500-600 to fix it. I looked online and bought a screen of ebay for $170 in hopes of fixing it myself. After getting the screen I hooked it up using the steps I found online. Sadly when I turned it on, the top half of the screen was working apparently normally, but then it faded to black. The bottom half stayed bright with color the whole time but the images were always blurred. When I close the screen with it on, then open it after turning the computer on, the top half lights up with my desktop images as if it is working fine but then fades to black. The bottom is still blurred the whole time. What all could be wrong? Display cable, Inverter cable, not registering the screen or something, the screen is bad? I don't now a ton about all this and I have learned most of what I know from online research. I am not sure if I should send the screen back or if there is another issue. I just want to fix this thing.

Unfortunately, you don't even know the lower half of the computer is working properly, because you didn't have it until after it had been abused. So forget the attached screen for the moment. Connect an external monitor to it, fire it up, and see whether you can get a usable image on the external screen. If you can, send the defective "new" screen back for a refund, or replace the LVDS video cable first to make sure that's not where the problem lies, and if it isn't, then resort to sending the screen back. If you can't get a good image on the external, give the junk machine back to your friend and walk away.

Fade to black at end of movie

In Garageband, there is a little triangle in the timeline that represents the end of the song. When you render (mix) the song out to a file, it will do it till it gets to that triangle.
Am I correct in saying that I need to add a gap at the end of every project if I want the end of the movie to fade to black and then have a second or two of black before the end of the movie file?
Thanks!
Scot

If you add the default dissolve transition at the end (command T with the end selected), it will fade to black. But there won't be any length of black once it is faded. For that you need to add a gap at the end. Option W inserts a default length (3 s I think) of gap at the playhead so make sure the playhead is at the end of your project first.

Fade to black at the end

Hi all
I've started to use Motion 5 for a few weeks now but I'm kinda stuck on how to fade to black on a project. Ok it's a
Motion 5 project (built in the program) called "Atmospheric - lower third" in the "Composition" section and I want to do a
5 sec fade to black. I added about 5 sec to the 20 sec project making it 25 sec and I don't find a fading FX in the program.
There IS a fade in and fade out together but I just want a fad out and how can I make it work?? I know I still need allot of
practice with this program and I intend to get Lynda video tutorials soon but I need to to this now for next week and I have
no idea what to do to make a good fade out. If it can't be done with this program can I export it to final cut X and do a fade
there? Any help would be very welcomed!!!!
THANKS!!!
Serge

The easiest thing to do is add a Color Solid:
Press the Generators button at the bottom right of the canvas and select Generators > Color Solid. This gives you a specialized shape that automatically fills the canvas with color. Set the Color (in the inspector) to Black.
Select the Properties tab and in the Blending section, set the Opacity to 0%
Right click on the word "Opacity" and from the popup menu, select Parameter Behaviors > Ramp
In the Behaviors inspector > Ramp, set the Start Value to 0% and the End Value to 100%
Move the playhead in the mini Timeline to the place where you want the "fade out" to start.
The Motion 5 Help window tends to be a little slow - and too in the way for me, so I have an online copy bookmarked for viewing in my browser here:
http://help.apple.com/motion/mac/5.0/en/motion/usermanual/
unfortunately, this version is not searchable, so I also keep the Motion 4 user manual bookmarked here:
http://documentation.apple.com/en/motion/usermanual/index.html
This version IS searchable. Keep in mind that Motion 4 and Motion 5 do not "look" the same. However, everything in the Motion 4 documentation (other than placement of icons, etc.) is concurrent with how Motion 5 works (Motion 5 has some new concepts that won't exist in the M4 documentation like Rigs and specialized drop zones that represent media content *in* FCPX.)
If you're okay with dealing with the appearance differences between Motion 5 and earlier versions, here is a good source for basic "practice" exercises (skip the ones on "Round-Tripping" -- that no longer applies to M5/FCPX): https://www.youtube.com/playlist?list=PLB7982C0260F090C1
More here:
http://www.applemotion.net/macbreak-studio/
And some pretty advanced tutorials here:
https://www.youtube.com/playlist?list=PLeZvvhzFi_ZxWbzZ5bhJ45QWzPHQ3Y5qy
All together, probably a better education than you'd get from Lynda.com and they're all free.

Audio cuts off during fade to black transition

After completing my movie, I tried to add a simple fade in at the very beginning and a fade out at the end. The video image fades fine but the audio is off altogether during both transitions.
What's weird is that if I look at the audio track in the precision editor, it looks like it fades in and out perfectly with the video.
Please help!
Thanks,
Jeremy

Any takers? I'd be very keen to learn how to do this as well.
I have a "fade to black" at the end of my movie but I don't want the audio to fade until the end of the clip.

Problems with fade to black transition and photoalbum themed titles

I keep having trouble with the titles in the photo album theme. When I use a fade to black transition and then try to use one of the top 4 titles available under the photos theme it seem like I have to move the title part of the way into the new clip or the fade to black transition just does not happen. It looks OK but the title come up after the new clip has been playing for several seconds and doesn't look as smooth. Any ideas?

One option is to create a "freeze frame" on the first frame of the new clip. Add your Photo Album title to the beginning of the new clip. Insert a fade to black transition between the preceding clip and the freeze frame. You may need to fiddle with the duration of both the freeze frame and the transition in order to get the timing right. Now, as the fade to black finishes you will see a short still segment just prior to the title commencing, as if the freeze frame is coming to life, so to speak. It looks quite effective, depending of course on the video content.
To add a freeze frame, right-click (or Control-click) on the appropriate frame, then select "Add Freeze Frame" from the pop-up menu. It's easier if you first move the thumbnail slider (lower right corner of the Projects window) to the half second mark, giving you a close-up view of your clips.
John

Fade to Black: Getting a weird colour distortion.

Similar Messages

Maybe you are looking for