Fade Tool problems! help please!!

I've noticed that when I'm editing audio files and cut out silences, I'm left with a loud clicking noise. So to solve this problem, I used the fade tool (esc 0) and faded out the ending of every single region which took a ridiculous amount of time to do.
This solved the problem, but I'm wondering is there a way to have all recorded audio automatically have a fade at the end of the region? I know that in other programs such as Reaper this is a function that can be turned on or off but is there a way to do this in logic to save time?
please help! thanks!

This is also where you turn normal fades into speed up/slow down fades (in L9) - click-hold on the word 'fade', and in general is a good thing to get in the habit of looking at.
For instance: Say you have drag mode set to X-fade, and you are dragging regions around and enjoying some automatic crossfading action. Great. Super. Now you decide this one particular region is not going to cross fade between two regions but is gonna be all by itself somewhere else. You still want to apply fades to it, but now they don't work with the fade tool. Look at the Inspector and you'll see that region has EqPower (or the abbreviation). So you have to change it to "out" and you're good to go.

Similar Messages

Photoshop CC text tool problem! Please HELP!

Everytime i try to use the text tool on photoshop CC it turn my picture black and keep flashing on and off.! Can someone please help me solve this problem? ( Please excuse my english, I'm still learning ^^")

Windows 8? Update your video card driver from the GPU maker's website.

Fade Tool Problem

Yet another confusion, sorry for prevailing upon you again AOS but I know you will have the answer. In the same project I had the loop problem, I am trying to use a fade on one region. The region is an audio track (live guitar) flattened and flex is off. I can make the fade graphic with the fade tool or in the inspector but I can't hear the fade. It is a simple long fade out and I have used this many times in the past. If I take all effects off I can hear the fade working so I guess it is the effects that are triggering after the fade. So my question is is there a simple way to use the fade tool and include the effects on the strip or do I have to use automation to get my fade?

Region fades and automation fades are slightly different animals. Both have their ups and downs. I have had trouble with region fades, too. If you have to use a region fade, here are some a few workarounds I have used when dealing with buggy region fades:
Use the delete All Fade Files command under the Mix Menu in Logic X. Close and reopen the song. This will force Logic to re-render the fades.
Drag the fade edge of the region slightly to change the region size.
Click to select the region. then manually enter the fade in the Region Inspector (Main Window, press I to show inspector, then click the disclosure triangle to show the Region Inspector, then click the More disclosure triangle.) You can enter the fade time in milliseconds (1000 ms = 1 sec). Yes, it's a lot of trouble to do it this way but you can shift+click multiple regions and apply a fade to all of them with this method; useful for multi-track/drum editing.
Occasionally. I have noticed that fades "disappear" from the regions. The inspector lets me check to see if they're still there and it's a display error. Save, close, re-open will usually fix it.

VIRUS PROBLEMS, HELP PLEASE???

I continue to have messages popping up saying my computer is infected. It wants me to cleanup and I have to register with Mac Shield 2.6. Pronograhic websites keep popping up. Anyone having this problem? Did not have this problem yesterday, but it's here today! There is also a Red Sheild on the top of the toolbar where it shows the time, battery life, etc. Right clicking on the sheild drops down Scan Now, Cleanup, Control Center, Scan, System Info, Settings, About, and Register. A pron site just popped up again! Need help Please!!

Fuony wrote:
The Mac Shield malware can come through Firefox too if you allow it to and you click on it!
Your exactly right, it is possible that if you visit a site and need the scripts to run for something that the malware that uses Javascript is on that site, then your going to be presented with it.
The thing is with the Firefox + NoScript combination defeats alot of the web side trickery the malware authors are using to get the malware to appear in the first place.
Also this "MacDefender" isn't the only malware making the rounds. There are some serious Flash vulnerabilities being hosted on hostile/adult websites that are running scripts for no apparent reason other than to try to infect your machine.
By running all scripts all the time, your computer is in a state as if you tried running across a busy highway blindfolded.
As a lifelong "MacHead" I can understand Apple loyalty, but if Apple isn't cutting the mustard on their browser security, rather place their users security at serious risk for the sake of convenience, then I have to think about using and recommending to others something else that is more secure.
As a example, I surf thousands of web pages a day, some on really nasty sites, yet I haven't seen this "MacDefender" appear on my computer. Even when I purposely visited links that people have submitted that had the malware. (I maintain a couple of bootable clones of my boot drive just in case)

ICloud problems help please!

I have an iPhone 6 and during the setup I must have did something wrong and now I have my old iCloud account on it that I no longer remember the password, security questions, and no longer have the email address to that account. I think I was hacked and my password and security questions changed. I want to log out of iCloud and start using my current iCloud account. I know these are security measures, but how can I get logged out??? My iPhone is having problems since the latest update and now I can't make a call or text. I can't call apple support without a working number HELP Please.

Hello shelbyrecords,
Oh no! That sounds really frustrating. Unfortunately, if iCloud Find my iPhone Activation Lock is enabled on the device we’ll need to gain access to your previous Apple ID account to disable it. Based on the information you have provided, it sounds like you may need a personalized support experience to recover your previous Apple ID:
If you forgot your Apple ID password - Apple Support
http://support.apple.com/en-us/HT201487
Make sure that you’re entering the correct Apple ID. In most cases, your Apple ID is also the primary email address of your Apple ID account. If these steps didn't help you change your password, contact Apple Support.
Thanks,
Matt M.

Soundtrack problems - help please

Help please. I tried doing a send to multi-track project from FCP with the base layer video option and kept getting the 'error sending selection to Soundtrack Pro' message. I did a search and the suggestion is that I have no disk space but I have over 600GB!
Then I tried a send with the full video and the file saved okay. However when I try to open the .stmp file, Soundtrack Pro starts and then freezes. I've tried opening in various ways.
Help please, I just cannot figure this out! What am I doing wrong?

Not sure how much help this is, but since you're having problems with the layout, did you try deleting the layout file? MacintoshHD/users/username/Library/Application Support/Soundtrack Pro/Layouts
BTW, I found a BKiLifeConfiguration.plist in the following path:
MacintoshHD > Library > Application Support > ProApps > Internal Plug-ins > BrowserKit > iLife.bkplugin > Contents > Resources
Do you find it there?

SQL INSERT problem - help please

Hello,
I'm having a problem with INSERT statement.
There is a "ShowFinal.jsp" page, which is a list of candidates who selected from the second
interview. The user picked some candidates from the list and conduct the 3rd interview. After
he check suitable candidates(who are selected from the 3rd interview) from the list , enter
basic salary for every selected candidate, enter date of interview and finally submit the form.
These data should be save into these tables.
FinalSelect(nicNo,date)
EmpSalary(nicNo,basicSal)
In this "ShowFinal.jsp" page, it validates the following conditions using JavaScript.
1) If the user submit the form without checking at least one checkbox, then the system should be
display an alert message ("Please select at least one candidate").
2) If the user submit the form without entering the basic salary of that candidate which was
checked, then the system should be display an alert message ("Please enter basic salary").
These are working well. But my problem is how to wrote the "AddNewFinal.jsp" page to save these
data into the db.
Here is my code which I have wrote. But it points an error.
"AddNewFinal.jsp"
String interviewDate = request.getParameter("date");
String[] value = request.getParameterValues("ChkNicno");
String[] bs = request.getParameterValues("basicSal");
String sql ="INSERT INTO finalselect (nicNo,date) VALUES(?,?)";
String sql2 ="INSERT INTO EmpSalary (nicNo,basicSal) VALUES(?,?)";
for(int i=0; i < value.length; i++){
     String temp = value;
     for(int x=0; x < bs.length; x++){
          String basic = bs[x];
          pstmt2 = connection.prepareStatement(sql2);
          pstmt2.setString(1, temp);
          pstmt2.setString(2, basic);
          int RowCount1= pstmt2.executeUpdate();
     pstmt1 = connection.prepareStatement(sql);
     pstmt1.setString(1, temp);
     pstmt1.setString(2, interviewDate);
     int RowCount= pstmt1.executeUpdate();
Here is the code for "ShowFinal.jsp".
<form name="ShowFinal" method="POST" action="AddNewFinal.jsp" onsubmit="return checkEmpty() &&
ValidateDate();">
<%-- Loop through the list and print each item --%>
<%
     int iCounter = 0; //counter for incremental value
     while (igroups.hasNext()) {
          Selection s = (Selection) igroups.next();
          iCounter+=1; //increment
%>
<tr>
     <td style="background-color:ivory" noWrap width="20">
     <input type="checkbox" name="<%= "ChkNicno" + iCounter %>"
value="<%=s.getNicno()%>"></td>
        <td style="background-color:ivory" noWrap width="39">
             <%= s.getNicno() %> </td>
     <td style="background-color:ivory" noWrap width="174">
          <input type="text" name="<%= "basicSal" + iCounter %>" size="10"> </td>
</tr>
<%
%>
Date of interview<input type="text" name="date" size="17"></td>
<input type="submit" value="APPROVE CANDIDATE" name="B1" style="border: 1px solid #0000FF">
</form>........................................................
Here is the error generated by TOMCAT.
root cause
java.lang.NullPointerException
     at org.apache.jsp.AddNewFinal_jsp._jspService(AddNewFinal_jsp.java:70)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:137)
I have goto the file "AddNewFinal_jsp.java". The line 70 points to the following line.
for(int i=0; i < value.length; i++){ [/b]
Please can someone help me to solve this problem? Please help me to do this task.
Thanks.

Hi Casabianca ,
It is clearly that your problem is not on the database end, more like a servlet/jsp issue.
I will not comment on the javascript portion, but rather the 2 jsps.
a simple way to trace what's go wrong is to check the final result (the html code) of the first jsp (showFinal.jsp), and compare against what is expected by the 2nd jsp (AddNewFinal.jsp). Most browser do provide "view source" on the page visited.
the following code
<input type="checkbox" name="<%= "ChkNicno" + iCounter %>" value="<%=s.getNicno() %>">
<input type="text" name="<%= "basicSal" + iCounter %>"
would likely to be "translated" to html code something as follow:
<input type="checkbox" name=""ChkNicno0" value="nicNo>">
<input type="text" name="basicSal0">
the original code in "AddNewFinal.jsp" using
request.getParameterValues("ChkNicno");
which looking for a none exist http request parameter (sent as "ChkNicno0",etc but look for "ChkNicno"), which has explained before.
the second attempt to use String[] value = request.getParameterValues("ChkNicno" + iCounter); give Cannot resolove symbol :iCounter. because iCounter never defined in the 2nd jsp!
Most of the error message do give clue to cause of error... : )
not too sure on your intension, assume you wish to update only those selected (checked) row to db.
some suggestions:
1) <input type="text" name="ChkNicno" size="10"> </td>...
<input type="text" name="basicSal" size="10"> instead.
then use javascript to based on checked element index (refer to javascript spec for more details), for those index not checked, clear off the correspond index "basicSal" field value.
e.g. ChkNicno[1] is not checked, empty basicSal[1] value before submission.
This will give us only selected rows values.
2) retain the code
String[] value = request.getParameterValues("ChkNicno");
String[] bs = request.getParameterValues("basicSal");at 2nd jsp, as now the http request will pass parameters using "ChkNicno" and "basicSal".
3) some change to the code for optimization
for(int i=0; i < value.length; i++){
     String temp = value;
     for(int x=0; x < bs.length; x++){
          String basic = bs[x];
          pstmt2 = connection.prepareStatement(sql2);
          pstmt2.setString(1, temp);
          pstmt2.setString(2, basic);
          int RowCount1= pstmt2.executeUpdate();
     pstmt1 = connection.prepareStatement(sql);
     pstmt1.setString(1, temp);
     pstmt1.setString(2, interviewDate);
     int RowCount= pstmt1.executeUpdate();
to
pstmt1 = connection.prepareStatement(sql);
pstmt2 = connection.prepareStatement(sql2);
for(int i=0; i < value.length; i++){
     String temp = value;
     for(int x=0; x < bs.length; x++){
          String basic = bs[x];
          pstmt2.setString(1, temp);
          pstmt2.setString(2, basic);
          int RowCount1= pstmt2.executeUpdate();
     pstmt1.setString(1, temp);
     pstmt1.setString(2, interviewDate);
     int RowCount= pstmt1.executeUpdate();
preparestatement created once should be sufficient as we do not change the sql statement throughout the loop.
there are better solutions out there, this just some ideas and suggestions.Do try out if you wish.
Hope it helps. : )

Multiselect problem Help please!!

Hi all,
I am currently using Application Express 3.1.2.00.02 I have developed an online questionnaire with a multiselect list for one of the questions. The problem i am having is that i need each choice to be totaled up separately on the report generated.
My table of answers looks like this:
Column name e.g. (Question 9)
Answer "Dog" "Cat" "Mouse" "Snake" (underneath column name Question 9 depending on what is selected).
The reporting page would look like below:
*(Column Question 9)* Count
Dog 1
Mouse 1
Snake 1
and for the question you could have another respondent who chooses similar of items on the multiselect, so their answer looks like this:
Answer
"Question 9" Dog
"Question 9" Snake
This would then start a new row on the reporting page like below which is not what i want:
*(Column Question 9)* Count
Dog 1
Mouse 1
Snake 1
Dog: Snake 1
But the report should look like this:
*(Column Question 9)* Count
Dog 2
Mouse 1
Snake 2
The current SQLquery i am using is below:
select "QUESTION 9",
count(*) c
from "P1 DQUESTIONNAIRE"
group by "QUESTION 9"
Thanks for your help and suggestions,
'S'

How to make sure your forum post will never be answered:
1) Make sure your subject line is completely meaningless (i.e. HELP PLEASE!) and describes no part of your actual problem
2) State that you are having "a few problems" but make sure to offer no details whatsoever what those problems are or what the symptoms are.
3) Post large volumes of code instead of distilling the problem down to a compact snippet
4) For extra points, make the code hard to read by refusing to make use of the "code" tag.

K8N Neo2-fx Ram problem Help please

I have three ram(2x512MB single sided , 1x1GB double sided). Is there any way I can put them all on the motherboard? When I place them all the computer is not starting and it`s making a "beep" every 2-3 seconds. If i connect the 1GB double sided on the Dimm1(green) and the one 512MB single sided on the Dimm3(green) it`s working properly. Is there any way I can use all my ram at the same time. I`m desperate. Help please... thank you

Quote from: wodahS on 09-November-06, 05:55:17
How can I put my computer facts under any post I am posting? I should make it my signature?
That's the rule mate which you need to gives all your component in details including your PSU and Bios revision so that others can help you! Like what BOSSKILLER say it won't works with 3 DIMMS unless you purhased another 1 GB of RAM then it can solve your problem with 4 DIMMS or else with 2*512MB RAM. Make sure that you've lowered your HT to <=800Mhz as default is 1000Mhz. GD luck.

Fade Tool Problems... Grrr

I have recorded my guitar, added effects and I want to use the fade tool but when I add the fade, it has no effect on the audio. Does any one know what the story is?

I never said GB mode was an issue, that was just an aside.
The only time fades do not work on audio regions is if a Flex mode is enabled on the track. You'd have to turn on Flex View to check that.

Spry Tool Tip problem - Help please!

When I add a tool tip to my template, it does not work when I roll over the object, and it shows the the text it is supposed to display at the bottom of the page.
It works fine on other pages where I've tested it, but not on this site.
Here is a page where you can see what it's doing.
Thanks!

Hi Bill,
could it be that your DW doesn't "find" your SpryAssets directory? I've intendedly nested it very deep and it works like a charm. In this case I had to write:
<script src="../../SpryAssets/SpryTooltip.js" type="text/javascript"></script>
<link href="../../SpryAssets/SpryTooltip.css" rel="stylesheet" type="text/css" />
Hans-Günter

SoundBlaster Zx major problems help please!

I tryd 3 Soundblaster Zx,s so far and i still dont understand why i have this problem, my mainbord is a MSI Big Bang Xpower 2 my previous soundblaster was a X-Fi Fitality Titanium Pro so if seen the reviews of the Zx on the net i was really exited about it, but now comes the weird part my mainbord wont detect any of these cards! i tryd 3 so far and al 3 had the same problem its not detecting the card the first one was acually detcting it for 2 days after that one morning i booted the pc and there was the speaker with the red cross true it no soundcard detected, the second one did not regonize the card @ all, and the third one was the same thing i tryed updating to the latest bios i tryd resetting cmos i tryd really everything i could think of, i realy need help with this so someone from creative please look further into this because this is a combination thats not working well i think
My X-fi is working perfect no matter what.
In other systems the Zx is working fine the problem i have is similar to this http://www.overclock.net/t/1350082/m...series-problem
Hopefully i get some ansers soon because this is just unacepteble.

i tryed updating to the latest bios i tryd resetting cmos i tryd really everything i could think of,
FWIW might want to check here: http://www.msi.com/service/forum/
MSI boards, Intel at least, seem to hold onto data, can be a bit of a PITA to clear the bios & update. Folks in the forum recommend not just using the reset button if you have one, or using the reset jumper, but pulling the battery for a while -- if the date's reset you know it was cleared -- if not than you only got at best a partial clear or reset. For updating the bios they recommend a tool & procedure you'll find in the forum, & they have a separate section with beta bios that might also help.
Also, I'm not familiar with your m/board, but you might want to double check the manual etc... My board for example has 2 pci-e slots [beside the 3 for graphics cards], but only one can be used at any one time.

Mildet connect to oracle DB using servlet problem ,help please

hi guys i have a problem am tring to connect my midlet to databse through midlet but i don`t know what is the problem so far the midlet already connect to my servlet url but the servlet cant read the parameters to open the connection for database
my servlet code
* To change this template, choose Tools | Templates
* and open the template in the editor.
import java.io.*;
import java.net.*;
import java.sql.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.text.*;
* @author freddy
public class getconnection extends HttpServlet {
    Statement statement;
ResultSet rs=null;
String bstr=null;
String bstr1=null;
String bstr2=null;
public void init()
    * Processes requests for both HTTP <code>GET</code> and <code>POST</code> methods.
    * @param request servlet request
    * @param response servlet response
    protected void processRequest(HttpServletRequest request, HttpServletResponse response)
    throws ServletException, IOException {
        response.setContentType("text/html;charset=UTF-8");
        PrintWriter out = response.getWriter();
        try {
            /* TODO output your page here
            out.println("<html>");
            out.println("<head>");
            out.println("<title>Servlet getConnection</title>");
            out.println("</head>");
            out.println("<body>");
            out.println("<h1>Servlet getConnection at " + request.getContextPath () + "</h1>");
            out.println("</body>");
            out.println("</html>");
        } finally {
            out.close();
    // <editor-fold defaultstate="collapsed" desc="HttpServlet methods. Click on the + sign on the left to edit the code.">
    * Handles the HTTP <code>GET</code> method.
    * @param request servlet request
    * @param response servlet response
    @Override
    protected void doGet(HttpServletRequest request, HttpServletResponse response)
    throws ServletException, IOException {
        processRequest(request, response);
doPost(request,response);
    * Handles the HTTP <code>POST</code> method.
    * @param request servlet request
    * @param response servlet response
    @Override
    protected void doPost(HttpServletRequest request, HttpServletResponse response)
    throws ServletException, IOException {
        processRequest(request, response);
        DataInputStream in = new DataInputStream(
                (InputStream)request.getInputStream());
        String sid = in.readUTF();
        String user = in.readUTF();
        String pwd = in.readUTF();
      // "jdbc:oracle:thin:@localhost:1521"+": "+sid
        String message = message = "Name:"+bstr+" telephone:"+bstr1+" burthday:"+bstr2;
         try {
            connect(sid,user, pwd);
            message += "100 ok connected";
        } catch (Throwable t) {
            message += "200 " + t.toString();
        response.setContentType("text/plain");
        response.setContentLength(message.length());
        PrintWriter out = response.getWriter();
        out.println(message);
        in.close();
        out.close();
        out.flush();
    private void connect(String sid, String user,String pwd)
    throws Exception {
        // Establish a JDBC connection to the MYSQL database server.
        //Class.forName("org.gjt.mm.mysql.Driver");
        Class.forName("oracle.jdbc.driver.OracleDriver").newInstance();
        Connection conn = DriverManager.getConnection("jdbc:oracle:thin:@localhost:1521:"+sid,user,pwd);
        System.out.print("connected");
        try{
           statement =conn.createStatement();
            rs=statement.executeQuery(" Select*from WOH.P_DEMGRAPHICS where P_ID='P1000 '");
        catch(SQLException e)
        System.err.print(e);
       try{
while (rs.next()) {
bstr=rs.getString(2);
bstr1=rs.getString(3);
bstr2=rs.getString(4);
statement.close();
   catch (SQLException e) {
//bstr += e.toString();
System.err.println(e);
System.exit(1);
        // Establish a JDBC connection to the Oracle database server.
        //DriverManager.registerDriver(new oracle.jdbc.OracleDriver());
        //Connection conn = DriverManager.getConnection(
        //      "jdbc:oracle:thin:@localhost:1521:"+db,user,pwd);
        // Establish a JDBC connection to the SQL database server.
        //Class.forName("net.sourceforge.jtds.jdbc.Driver");
        //Connection conn = DriverManager.getConnection(
        //      "jdbc:jtds:sqlserver://localhost:1433/"+db,user,pwd);
    * Returns a short description of the servlet.
    public String getServletInfo() {
        return "Short description";
    // </editor-fold>
}Midlet code
* To change this template, choose Tools | Templates
* and open the template in the editor.
import java.io.*;
import java.util.*;
import javax.microedition.io.*;
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
* @author freddy
public class testOrcl extends MIDlet implements CommandListener {
   protected String url;
    private String username;
    private Display display;
    private Command exit = new Command("EXIT", Command.EXIT, 1);;
    private Command connect = new Command("Connect", Command.SCREEN, 1);
    private TextField tb;
    private Form menu;
    private TextField tb1;
    private TextField tb2;
    DB db;
    public testOrcl() throws Exception
        display=Display.getDisplay(this);
        url="http://localhost:8084/getConnection/getconnection";
    public void startApp() {
        displayMenu();
    public void displayMenu()
    menu= new Form("connect");
     tb = new TextField("Please input database: ","",30,
                TextField.ANY );
        tb1 = new TextField("Please input username: ","",30,
                TextField.ANY);
        tb2 = new TextField("Please input password: ","",30,
                TextField.PASSWORD);
        menu.append(tb);
        menu.append(tb1);
        menu.append(tb2);
        menu.addCommand(exit);
        menu.addCommand(connect);
        menu.setCommandListener(this);
        display.setCurrent(menu);
    public void pauseApp() {
    public void destroyApp(boolean unconditional) { }
    public void commandAction(Command command, Displayable screen) {
        if (command == exit) {
            destroyApp(false);
            notifyDestroyed();
        } else if (command == connect) {
            db = new DB(this);
            db.start();
            db.connectDb(tb.getString(),tb1.getString(),tb2.getString());
* To change this template, choose Tools | Templates
* and open the template in the editor.
import java.io.*;
import java.util.*;
import javax.microedition.io.*;
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
import java.lang.*;
* @author freddy
public class DB implements Runnable {
    testOrcl midlet;
     private Display display;
        String sid;
        String user;
        String pwd;
        public DB( testOrcl midlet)
        this.midlet=midlet;
        display=Display.getDisplay(midlet);
    public void start()
    Thread t = new Thread(this);
            t.start();
    public void run()
     StringBuffer sb = new StringBuffer();
            try {
                HttpConnection c = (HttpConnection) Connector.open(midlet.url);
               c.setRequestProperty(
                   "User-Agent","Profile/MIDP-2.1, Configuration/CLDC-1.1");
                c.setRequestProperty("Content-Language","en-US");
                c.setRequestMethod(HttpConnection.POST);
                DataOutputStream os =
                        (DataOutputStream)c.openDataOutputStream();
                os.writeUTF(sid.trim());
                os.writeUTF(user.trim());
                os.writeUTF(pwd.trim());
                os.flush();
                os.close();
                // Get the response from the servlet page.
                DataInputStream is =(DataInputStream)c.openDataInputStream();
                //is = c.openInputStream();
                int ch;
                sb = new StringBuffer();
                while ((ch = is.read()) != -1) {
                    sb.append((char)ch);
           showAlert(sb.toString());
                is.close();
                c.close();
            } catch (Exception e) {
                showAlert(e.getMessage());
     /* This method takes input from user like db,user and pwd and pass
            to servlet */
        public void connectDb(String sid,String user,String pwd) {
            this.sid = sid;
            this.user = user;
            this.pwd = pwd;
        /* Display Error On screen*/
        private void showAlert(String err) {
            Alert a = new Alert("");
            a.setString(err);
            a.setTimeout(Alert.FOREVER);
            display.setCurrent(a);


Comment out process request or rewrite & move it to a position after you read the parameters and connect to the db. Decide where you want to write to the output stream. Also, you have some superfluous casting.
I take it that you are using netbeans? If you debug and step through the code you will get an idea of the flow. The steps should be, midlet connects with POST, doPost is called, server reads parameters, server opens connection, executes query, releases/closes connection, and writes a response to the midlet.
Some notes about the connect method; The scope of rs may cause problems. It is unlike you will have a valid result set if you have a problem with create statement or execute. Take a look at connection pooling and be mindful how the connections are opened, used, and closed; put all the important cleanup operations in a finally. Remove system.exit from your servlet. Actually I would suggest limiting the scope of all your vars;
If you store the username, password, and sid on the midlet, you may have trouble updating the installation base if you need to change the values for any reason. Also, you have clients which contain your database u/p, susceptible to snooping and decompilation. Use the servlet to abstract the db from the client. And use a datasource (with connection pooling) for obtaining connections to db.

Cropping in Elements 11 - Floating in Video Problem - Help Please!

Please help - bottom of video looks like I am floating. Any help would be greatly appeciated.

realjeffl
From my point of view, I believe I know what you did, and I need no screenshot, unless you cannot confirm the following results.
I am essentially certain that I fully understand what you did. It was your use of the Crop Tool and its settings that needs fine tuning.
If you want to crop out that curtain from the left side of the Green Screen Clip, then please try this and let us know the results.
a. Drag the Crop Effect into your Green Screen Clip on Video 1, either into the Monitor or the clip on the Timeline (Expert view) Video 1.
b. Make sure the clip is selected, go to the Applied Effects Palette and the Crop Panel there. Expand the Crop Panel so that you see the settings options.
There are Left, Top, Right, and Bottom sliders there. I cannot give you exact number for your specific situation, but follow this scheme:
Left Slider, move in direction to cut out your curtain on the left side of the Green Screen Image.
Top Slider, move in direction to bring image to the top of the frame just until there is no black showing at the top.
Right Slider, move in direction to bring image to the right edge of the frame until there is not black showing at the right side
Bottom Slider, move in direction to bring image just to the bottom of the frame until there is no black showing at the bottom.
Place a check mark next to Zoom. The frame should be filled with no black border and your person image should be seen intact.
Go back to the Timeline and apply the Green Screen Key Effect to your clip.
I have just done a run through to YouTube with this workflow. Please compare my first upload to YouTube (no cropping) with the current upload that incorporated cropping to get the curtain (seen in the first upload) cut out of the picture.
http://www.youtube.com/watch?v=eGZHkJnEscY
We will be watching for your comments.
Thanks.
ATR

Shockwave Player 11 - Problem HELP PLEASE!!

I have upgraded to Shockwave Player 11 but I am having big
problems. I have installed it but when going on a Shockwave
supported sites ie; iSketch, it comes up in a white-box with a
message ''Adobe Shockwave Player is now installing.'' ''Installing
compatibility components.'' with a white bar below which is
supposed to fill up but doesnt. Screenshot on Link below. I have
been trying it both on IE7 & Firefox, tried both semi and full
installer but no luck. Please help?
http://i7.photobucket.com/albums/y295/ldndude/others/ShockwaveFlash11Problem.jpg

quote:
This worked for me. It will actually let me access the game,
but it is unplayable. The drawings are all just random lines. When
I draw people see this problem, it looks like I am just drawing
random lines on the canvas.
I'm glad 4 helping u.4 me all the games r playable.But the
new ones like....
http://www.miniclip.com/games/power-boat/en/
or
http://www.miniclip.com/games/rally-championship/en/
r very slow.

Fade Tool problems! help please!!

Similar Messages

Maybe you are looking for