Fader Doesn't Work on Automated Tracks?

Sorry if that sounds nooby. I've recently migrated to Logic Pro X from Reaper. I'm really enjoying LPX, except Flex Pitch that keeps creating artifacts on my vocal tracks. But that's not why I'm here for. I've already automated all of my tracks in the mix and now I'm just doing some fine mix only on the mixer before mastering. But whenever I move a fader from an automated track, it keeps coming to the volume marked at the automation. I would like to use the mixer fader to move the overall volume but keeping the automation. Like trim does in the tracks window. I tried to mark Trim or Relative on the Automation "mini rack" on the channel strip, but didn't work either. Any thoughts? Sorry 'bout my rusty english...

I have just had the same problem thi fixed it for me:
Right click on the clip, go to show clip keyframes, then select opacity. the opacity keyframe line appeared after i did that.

Similar Messages

  • PSPaletteMenu category doesn't work for automation plugins

    Hello,
    I would like to have a menu item under Photoshop "Window" menu for my automation plugin.
    There is a notice in the PIPL.r file that goes with SDK:
    // Use PSPaletteMenu category to add a menu item on the Window (i.e., palette) menu.
    // This is currently only enabled for automation plugins.
    PSPaletteMenu ="**Palette**";
    However when write my PiPL res like in example below
    resource 'PiPL' (ListenerResourceID, plugInName " PiPL", purgeable)
    Kind { Actions },
    Name { plugInName "..." },
    Category { "**Palette**" }, // or Category { PSPaletteMenu }
    Version { (latestActionsPlugInVersion << 16) | latestActionsPlugInSubVersion },
    menu is not shown under Window menu :(
    Want to note that if I specify Category { PSHelpMenu } it works correctly and menu item is shown under Help menu. PSPaletteMenu also doesn't work for Listener plugin that ships with PS SDK.
    Looks like plugin is not recognized as automation plugin, but I have correct info.plist props (on MacOS X version)
    What should be done to have my plugin menu item under "Window" menu?
    Regards,
    Mac Developer

    Hi Tom, thanks for your reply. Actually I'm not asking about floating palette (which I actually created and there is no issues observed). I just need my automation (!) plugin entry point to be called with kPSDoIt ("Do It") selector action after menu item is chosen under Window menu. (like it works in case PSHelpMenu)
    In the PIPL.r file that goes with SDK it states that
    // Use PSPaletteMenu category to add a menu item on the Window (i.e., palette) menu.
    // This is currently only enabled for automation plugins.
    PSPaletteMenu ="**Palette**";
    Is it documentation issue?
    Regards,
    Mac Developer

  • Pen Tool doesn't work on Video Tracks

    Hi there,
    Today I woke up and found that video tracks in my timeline I could no longer just grab the pen tool, click, and change the levels (such as manually configuring a fade in or out dissolve)
    There is just no line in the Video track where I can click and drag the levels up and down.
    But the pen tool still works in audio tracks. I can raise lower my volume no problem and also manually configure sound transitions.
    The only thing I can think of that I did was I used some h.264 video that had some frame blending in it (not sure what its called but were not every frame is Independent) but now when I go into any project including projects that I clearly used the pen tool before-- no go. The line for the level is just not there anywhere anymore.
    Anyone know what it is or if there is a setting that allows you to fudge with the video levels in the timeline. Maybe I disabled it somehow and need to re-enable it?
    thanks!

    I have just had the same problem thi fixed it for me:
    Right click on the clip, go to show clip keyframes, then select opacity. the opacity keyframe line appeared after i did that.

  • After updates solo button doesn't work with comp track, anyone have the same problem?

    Hello everyone, after upadtes solo button is not soloing a comp track,
    is there someone that knows to fix this bug?
    it's possible that now logic consider a comp track as muted, and then doesn't solo the comp track ?
    thanks everyone

    Looks like there may be a solution on Itunes 10.5 64bit will not install on Win7. I am going to try that.

  • Network copying that has no problem in Finder doesn't work in Automator

    Hello,
    there seems to be an issue with open files:
    If I drag a folder containing some open files from a mounted Windows 2003 server share onto my desktop in 10.6, then copying works fine even though files are open. 10.4. works the same, but not 10.5, I get permission errors there.
    If I try do do the same with an automator program, then there will be an error message like 'file xyz couldn't be created'. In 10.4 an automator programs doing the same works fine.
    Is there a trick to copy open files in automator with 10.6?
    Thanks for your help.
    -Hans

    This is not a feature of iPhone, iPad or iOS.
    Bluetooth is supported for stereo headsets/speakers, handsfree telephone
    devices/headsets, some keyboards, some peer-to-peer apps from the
    app store and internet tethering where provided by the carrier.
    Other than this it will not connect to a phone/computer/device.  (thanks to ckuan for the wording)

  • Perl's __END__ doesn't work under Automator's Run Shell Script action

    Howdy,
    I have a large embedded data file in my Perl source file using the _END_ token. It works great at the command line, but when I copy and paste my Perl code into the Run Shell Script code window and execute it, reading the special file handle DATA always returns 0 lines.
    Help?
    -Eric

    Originally I was using $@ to parse a string and get the result pasted by the service. That was a while ago. There, I noticed that some Japanese characters were messed up. Basically all the kana characters that come with voicing markers like が-ga (instead of か-ka) etc. I did not have the time to pursue that issue though.
    Then, last night, I found that a colleague of mine had tried to use $@ to feed to a local dictionary application called ding (http://ftp.tu-chemnitz.de/pub/Local/urz/ding/). His problem was with characters that had umlauts. After verifying how he wrote his action I remembered that I had similar issues with Japanese.
    Basically his command was "/path/to/ding $@"
    That's supposed to use the selected string as an argument to pass to ding, which will launch a Wish application where the string is used as the searched item.
    From Terminal, that works a treat. But the exact same line in Automator (with input as argument, not as stdin) messed the composition and the resulting string was not recognized by ding as a match to what it was supposed to match.
    So, I tried a few things to get to the core of the issue and found that a simple "echo [accented characters]" was enough to reproduce the difference in string handling between Automator and Terminal. That difference is also reproduced on a number of person's machines.
    I have a number of services that basically revolve on "run shell script" actions and involve 3rd party application outputs, preference files etc. so it would not be convenient to show that to you.
    I have sent a mail about this issue to the automator list yesterday too:
    http://lists.apple.com/archives/Automator-users/2011/Jun/msg00004.html

  • "Move Current Track Automation Data to Region" doesn't work for all

    I have been using the 'Move Current Track Automation Data to Region' and while it works fine for some types of automation data like channel volume, pan and some plugin parameters, it doesn't work for all of them.
    I haven't done exhaustive research into which parameters work and which don't, but most of the parameters for individual voices within Ultrabeat don't - which is annoying as that is what I was trying to use it for.
    Any ideas about this, or workarounds?

    OK, well an update on this in case anyone's interested.
    With some further experimentation I have discovered that this problem did not exist in Logic 7 - ie you can move current track automation data for individual Ultrabeat voices to the region.
    It's also possible to move automation data for individual Ultrabeat voices using 'Move All Track Automation Data to Region,' so I suppose this is a kind of workaround, though it can be annoying if you don't want to move all track automation data.
    I'm now assuming this is a bug in Logic 8; is there any way to convert a Logic 8 project to work in Logic 7, as this along with the touch tracks bug is making working in Logic 8 very frustrating?

  • Satellite Pro L20 doesn't work properly with USB Fast Track audio i.f.

    Hello!
    I have used my Fast Track USB on new Toshiba Satellite L40 and I never had problems with it. I could set low latency and I did few songs with it.
    Yesterday I bought another notebook, thinking of home recording studio. It's used Toshiba Satellite Pro L20. It doesn't work properly with my interface. When I listen music on Winamp or do anything on Fruity Loops I hear loud clicks, pops, noises. They introduce samples, or they appear during playback or after a sample is stopped.
    I noticed, drivers for Satellite Pro L20 are a problem. Its not supported by Toshiba anymore?! The only drivers for chipset are very old and you can download em only from Toshiba website. The chipset is ATI Xpress 200M. Its drivers are with graphic card. Recently I noticed you can download "ATI Catalyst Legacy Display Driver for Windows XP - Motherboard/IGP Drivers 9.11" and CRACK IT to make it possible to install on mobile unit such as L20. Yep its funny but its impossible to do otherwise!
    things I have tried and they still not help:
    # drivers replacement, original were released in 2004. I installed recent version.
    # driver settings, low latency, high latency
    # asio and different settings
    # pluging the interface to another usb socket.
    # trying what happens when I use battery and when I use adapter
    # updated bios
    # turned off onboard units such as wifi card, sound card
    # checked IRQ list
    pops still appear.
    my config:
    Toshiba Satellite Pro L20
    Win XP Home SP3
    Celeron M 1,5GHz
    896Mb ram
    M-Audio Fast Track USB, drivers: 6.0.2
    Kind regards

    Thanks for answer. I still have L40 but I try to run my homerecording on L20. The L40 is now used by whole my family. It's possible to swap them but there's a problem - L20 has Norway keyboard and I'm the only person at home who doesn't often look down while typing. In Poland, we use standard ms keyboard. I'd buy special stickers, it's about only to make special chars get back to their places.
    I installed Windows on this computer end set it to best performance possible.
    Since I created this thread, guys from M-Audio support tried to solve my problem - nothing helped. I think potential solutions are exhausted.
    Message was edited by: lidia.pochron

  • I pay for upgrading ifindyou and it doesn't work!!!! it clearly says that it tracks only your mobile in the lite version, after you ask the upgrade for all the mobile... can we call this a fraud????

    i pay for upgrading ifindyou and it doesn't work!!!! it clearly says that it tracks only your mobile in the lite version, after you ask the upgrade for all the mobile... can we call this a fraud????

    Hi,
    "A day after the name change became official my built in skydrive app stopped working"
    Did you point that SkyDrive changed to OneDrive?
    Did you move your OneDrive to another location or change its name?
    Please login OneDrive with web-based to check if you could access it successfully.
    Please refer to the following article to try the troubleshooter and check the service status:
    SkyDrive: FAQ
    http://windows.microsoft.com/en-in/windows-8/skydrive-app-faq
    Karen Hu
    TechNet Community Support

  • I'm using a Dell Inspiron 7520 ... pretty new. Sometimes when I download a CD / album to my library acouple of tracks get separated away from the main group. I've tried to click and drag the stragglers over to the main group but it doesn't work. Any Ideas

    .When installing a CD/album into my library some of the tracks get separated away from the main group of tracks. I try to click and drag the stragglers to the main group but it doesn't work. My laptop is using Windows 8. My old XP laptop didn't have this problem. I'm not sure if that has any thing to do with it. Any ideas would be appreciated. It's more of an irritation than a problem but if it can be solved, it would be a good thing. Thanks!         Paul 

    Hey Paul,
    If I understand correctly, it sounds like iTunes is not grouping the songs from a particular CD together. The cause could be something as minor as a misspelling or slight variations. For more information, see the following resource:
    Why aren't songs with the same album art grouped together?
    http://support.apple.com/kb/TS1468
    Thanks,
    Matt M.

  • M-Audio Fast Track Pro doesn't work with OS X Mavericks Garageband or MainStage 3

    I used to be able to use MainStage 3 and Garageband with my M-Audio FastTrack Pro with no problem. Then, when I upgraded to OS X.9 Mavericks, it doesn't work. Avid (who now supports the FastTrack Pro) recently came out with an updated driver that supposedly upgrades for OS X.9 Mavericks (http://avid.force.com/pkb/articles/en_US/Download/Fast-Track-Pro-Drivers), but even after downloading/installing the driver and updating the device, I still can't get it to work with Garageband or Main Stage 3.
    It seems that the software sees the M-Audio FastTrack Pro USB, I even see an audio signal in both MainStage 3 and Garageband for my guitar or microphone input, but there is no output sound from the FastTrack Pro to my PA system other than the analog sound (no sim amps or vocal effects work).
    Anybody been able to solve this problem?

    I had the same problem (Fast Track Pro + Mavericks 10.9.2 > no output sound).
    After trying several combinations, I found out an non logical solution, but it did work
    What I did:
    1) Download the most recent driver update 1.9.4 (http://avid.force.com/pkb/articles/en_US/Download/Fast-Track-Pro-Drivers)
    2) Uninstall Fast Track Pro Drive and restart computer
    3) After restar, do NOT install again. Just go to the System Preferences/Sound and set Fast Track as your in/output port
    Hope it helps!

  • My track pad doesn't work properly anymore I can't click only tap

    My MacBook Pro is acting strange.  I can't use my track pad properly.  I can only tap and when I click it doesn't work properly.  Has anyone else experienced this and what you did to fix it.  Thanks

    My MacBook Pro is acting strange.  I can't use my track pad properly.  I can only tap and when I click it doesn't work properly.  Has anyone else experienced this and what you did to fix it.  Thanks

  • Within Music Library can anyone please explain why when I select the option to sort 'Album by Artist' a number of tracks are being treated as separate albums?  How can I correct this?  I have tried to 'drag and drop' but that doesn't work.

    Within music Library can anyone please explain why after I select the option to sort 'Album by Artist' a number of tracks are being treated as separate albums?  How can I fix this?  I have tried to manually correct by 'drag and drop' individual tracks but that doesn't work.  My music library includes a number of repeat album artwork images simply because not all tracks are being listed under the one album making my library more difficult to use than it should.  Any advise would be appreciated.

    See Grouping tracks into albums.
    tt2

  • Automated batch doesn't work in photoshop & from Bridge

    Hi all,
    Automated batch from  Bridge  tools>photoshop>batch  Photoshop cs5 stops working. Automated batch also doesn't work in photoshop. Automated actions work in Photoshop. All other Photoshop process work  from Bridge. I use a PC with windows. This happens even with files I was  previously able to do an automated batch with Photoshop. It doesn't  matter what the file extension is. This has only recently begun  happening for no apparent reason.

    First, given what you've written, it's important to ask:  48 x 48 what?  Details matter.  48 x 48 pixels?  Inches?
    Beyond that, yes, I believe the Image Size dialog interacts with us a little differently than it used to.
    Whether it's a positive or negative design change I can't say.  They're trying to pack a lot of functionality in there, and it might take a little getting used to...  It does seem deterministic:
    If you want to keep the physical print size the same and increase the pixel density - i.e., upsample the  image - you would have to choose physical dimensions.  Try this:
    1.  Change the units to inches.
    2.  Change the ppi value and press OK.  This resamples the image.
    On the other hand, if you want to keep the pixel count the same, but just change the ppi value so that it matches a particular kind of display, how would you do it?  Try this:
    1.  Change the units to pixels.
    2.  Change the ppi value and press OK.  This changes the metadata.
    Are you trying to assume what leaving the units set to percent means?  To me it says "xx % of the pixel count".
    -Noel

  • Two Finger Scrolling using track pad doesn't work.

    You know how you can drag 2 fingers down the track pad to sroll down a page. Well, it doesn't work for me using Vista through Boot Camp. I tried the update, but it wouldn't install.
    Is this as good as it gets?
    Hypnoguy

    Hypnoguy,
    Sorry I haven't used boot camp for a long time my memory is a little fuzzy. Also note I used it with XP and not Vista, but don't use it at the moment anymore.
    Here is a list of Supported Macs for 64-bit windows: http://support.apple.com/kb/HT1846
    As per your trackpad problems after the drives have been installed I would try to install the update again: http://support.apple.com/kb/HT3336
    Here are the boot camp updates and also may help with errors:
    64 bit: http://support.apple.com/downloads/BootCamp_Update_2_1_for_Windows_Vista64
    32 bit: http://support.apple.com/downloads/BootCamp_Update_2_1_for_Windows_Vista32
    Also I would look in the boot camp system tray tool to see if there are settings related to your function keys.
    Sorry I don't know of a function key that changes the startup volume, I only know of the select from the boot camp system tray (Windows)/Startup disk preference pane (Mac) or the hold option during startup. More on that here http://docs.info.apple.com/article.html?path=Mac/10.5/en/11892.html
    A good place to find a lot of Bootcamp support would be here: http://www.apple.com/support/bootcamp/
    Hope that helps,
    Weston

Maybe you are looking for