Fader movements not "recorded"
Sorry for the dumb question, but I've been struggling with this for two days. I'm working with several test projects in the latest version of Logic Pro X and when I set the channels to Touch, Latch, or Write, sometimes their movements get "recorded" and sometimes they don't. This is project by project, not within one project.
I've done it before several times with earlier version of Logic and some projects (especially sample projects from tutorials) work fine: as a I play the tracks and move the volume faders, the fades are set and when I then play back, they fade up and down as needed. But other projects just won't work in this way; no matter whether I set it to Touch, Latch or even Write, none of the fader movements play back, even if I change the to Read. This applies to soundtracks I import (via XML) from FCP X or new test projects into which I import various audio files. It also makes no difference if I am using the software faders in Logic or the hardware ones one on the Zoom R-16 I'm using — in some projects it works, in other projects, it just doesn't work.
What am I doing wrong?
triglyph wrote:
no matter whether I set it to Touch, Latch or even Write, none of the fader movements play back, even if I change the to Read. This applies to soundtracks I import (via XML) from FCP X or new test projects into which I import various audio files. It also makes no difference if I am using the software faders in Logic or the hardware ones one on the Zoom R-16 I'm using — in some projects it works, in other projects, it just doesn't work.
Are you having problems writing new automation and/or playing back existing Automation.
Problem playing back Automation:
In that case, do you see the the Control Points and the Automation Curve on the Track Lane?
Do you see the Automation data in the Automation Event List (open with the Key Command control+command+E)
When you import a FCPx project with Volume Animation via the Final Cut Pro XML file, the Key Frames should be imported . Do they show up in Logic and do they play back?
Problem with recording Automation:
When you have a Track with no Automation yet and you move, for example, the Volume Fader, do you see the Automation Curve (single Automation Control Point with single line), moving up and down?
Just want to double check that you know the difference between the two Automation Buttons. the bigger one on the Tracks Window's Menu Bar just shows/hides the Automation and the smaller Automation Button on the Track Header, enable/disable the Track Automation on that specific Track.
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'
Similar Messages
-
Movie not recording in QT with isight cam
Hi all,
My isight is properly connected to my G4 MDD via firewire port. I get this message trying to save my movie clip," Recording failed because no data was received. Make sure media input is turned on and playing." My iSight is connected and working fine. I see green light on front and audio is working. What can it be?
Thanks for your help
Web dudeHi
My iSight connection is up fine when viewing it on my Apple profiler. I also did an audio test and it came up fine. I also connected my iSight cam to my G4 AGP tower and it works perfectly. What can it be that my G4 MDD displays "no recording was received."
Web dude -
Logic Pro 8, Yamaha 01x records erratic values during fader movement
During gradual fader movements in any on the automation modes (latch,write or touch) the recorded values appear 'stepped' in the fashion illustrated. It's almost as if it's recording two values for each change it senses! Any Ideas?
Automation data is always absolute unless the SNAP function is selected (which it is not!)
If these were automatic entries, why would they vary in EVERY case? The example shown varies by 0.3db but in others on the same automation recording at relatively similar speed of movement they may vary by 1db or even as much as 2db in some cases!!!!
Strangely, when editing the 1st of the two nodes by hand (lets say they are 15.9db and 16.2db respectively) the first node will never exactly match the second in value! i.e the next step from 15.9db would be 16.4db. Even worse - in the automation event list the values are shown as whole numbers without decimals! -
Old aptv is no longer syncing purchased movies and tv shows with my computer. well it syncs, but does not record the movie/tv on the computer hd. Is this a matter of obselesence of is there something I can do to restore the backup?
I disabled all my computer's firewalls and sure enough, IT WORKED!! My iPod is updated and just now finishing restoring! Thank you SOOOO SOOO much. : D
-
Captivate will not record ALL screen movements
I have been using Camtashia and recently move to another
company where they want to start using Captivate. I just bought
Captiveate and I am getting very aggrevated! Captivate will not
record all my movements with the mouse or when a screen changes. It
appears that everything is driven by an actual mouse click. Only
when I move my mouse around and then click will it actuall record
the "action".
Please tell me there is a way for Captivate to record all
mouse movements, keystrokes, changes in applications just as I see
it when I am actually doing the recording.
I dont need all this fancy highlighting and project wizards,
I just simply want Captivate to record EXACTLY what I do and see
while I am recording.
PLEASE HELP!Hi Tmy8ster and welcome to our community
No doubt you are frustrated if you are expecting Captivate to
behave like Camtasia. Yes, both create similar output, but both
accomplish it in entirely different ways.
Perhaps the following link to a thread where I attempted to
explain it will help:
Click
here to read the thread
Cheers... Rick -
Garage Band, I am using an MBOX with a digi design audio core as a mic interface to recod into Garage Band. Now when I Change the preferences to use the MBOX I can not move the recorder slider and there is no sound going into garage band? Any solutions
10.5.8 with latest garageband 5.1 with MBOX 1. On Nov 4.09 I did a software update, now i get no output volume or input volume to the computer itself. I get it from head phones from my mbox, but not to the computer. Before the software update It worked great. I've tried upgrading software through digidesign .com, but they dont seem to have one for what i need. any way to get my old garage band back? go from 5.1 to earlier? Or maybe it was the upgrade to 10.5.8. update? Can i go back in time lol?
Any help would be appreciated
BTW
Ive tried all the system sound prefs, and garage band drivers. Back and forth.
cheers
ds -
Quicktime not recording audio in New Movie Recording
Audio is not recorded when using an audio interface as the input in New Movie Recording, but records fine when in New Screen and Audio Recording. Using my laptop's internal microphone is fine, cannot work out what the problem is, as it has worked absolutely fine in the past, but has stopped.
Sound can be heard and the volume meter in Quicktime responds to sound coming in, just doesn't record at all in that mode.Are you launching Captivate with Run As Administrator privilege?
If one of your co-workers logs onto your PC with their user profile, does the same microphone that doesn't work for you work OK for them? -
I have .mov files recorded from an ipad with these specs:
AAC, Mono, 44.100 KHZ
H.264 320x568 (yes the ipad was used vertically, not horizontally)
29.96 fps
I want to edit them in premiere 12, but get this error message:
This type of file is not supported or the required codec is not installed.
What are my options? Thanks!linn749
Thanks for the reply.
As for orientation, there is a rotation feature in Premiere Elements 12....at the Timeline level, you can right click the clip and select Rotate 90 Left or Rotate 90 Right. So that may help.
This is what you may want to try and see what this looks like
1. Open Premiere Elements 12 to its Expert workspace
2. Go to File Menu/New/Project and Change Settings
3. In the Change Settings dialog, change the project preset to NTSC DV Widescreen.
4. Before you exit that area, in the last dialog that you see (new project dialog), make sure you have a check mark next to "Force Selected Project Setting on this Project".
5. Back in the Expert workspace, use Add Media/Files and Folders/ to bring your video into Project Assets from where you will drag it to Video Track 1. We can talk about edits if necessary.
6. Publish+Share/Disc/DVD disc with preset set for NTSC_Widescreen_Dolby DVD.
7. Place your DVD 4.7 GB/120 min disc in the burner, in the burn dialog, have a check mark next to "Fit Content to Available Space". Hit Burn.
If you decide to take the Timeline to YouTube instead,
Publish+Share/Social Websites/YouTube, using Presets = Flash Video for YouTube (Widescreen)
Hit Next and follow the instructions.
(Upload to YouTube from within Premiere Elements 12 has limits of 2 GB and 15 minutes. Anything exceeding that, you need to export to file saved to the computer hard drive and then upload that file to YouTube at the YouTube web site where you might be able to get extended limits.
Please let us know if you are OK with the above information.
Thanks.
ATR
Add On...If you want to "decorate" the black borders in the Timeline content, drag the video to Video Track 2 and put a colored background on Video Track 1 directly below the Video Track 2 content. -
Satellite P300 Model PSPCCC-0K501C
DVD model GSA-T50N I tried many new blank DVD's. I uninstalled the drive, rebooted and let Windows 7 redetect the drive and install drivers. Device manager shows device is working properly. DVD movies will play but when I try to burn a blank DVD I get a message that says "DVD is not recordable". What should I try next?Hi my trouble shooter gave me all kinds of good information.
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.
Attachments:
Capture48.JPG 166 KB -
Idoc mbgmcr02 movement type 311 .. goods movement not possible w/mvmt type
i am using we19 to create a test idoc...i have the ports and partners filled in...i am using movement type 311..i have the material , the plant, the storage location...the qty..i have the move material, the move plant and move storage location filled in...
when i use standard inbound processing it generates the idoc..i go to we02 and look at the idoc..in the status records i get status 51 goods movement not possible with mvmt type 311..????what am i missing
if i do the exact same thing with the transaction migo...works fine...
am i missing something????i am trying to move material from one location to another using IDOC MBGMCR02..
I am entering the following...
E1BP2017_GM_Code=04
in e1BP2017_GM_ITEM_Create
Material=CON2020
Plant=3000
Stg_Loc=0001
Move_Type=311
Entry Qty=001
Move_Mat=Con2020
Move_Plant=3000
Move_Stloc=0002
Mvt_Ind=??????
In the Mvt_Ind I have tried E,K,M,Q
the in get a status 51 Update Control of Movement Type is incorrect(entry311XX_K)....
Is E1BP2017_GM_CODE = 4 correct???
What should be the Mvt_Ind??? -
(sorry, minor update to previous post...)
Hi all,
I have an error which doesn't for some reason (doesn't)
always rear it's
ugly head.
Basically it's part of the repeat region/move to record
functionality of
DreamWeaver 8
The error message is:
Microsoft OLE DB Provider for SQL Server error '80040e14'
Could not find prepared statement with handle -1.
This is the code block:
' reset the cursor to the beginning
If (MM_rs.CursorType > 0) Then
MM_rs.MoveFirst
Else
MM_rs.Requery ' this is the offending line
End If
I'm working with ASP vbscript with SQLServer 2005
Does anyone have any ideas what is going on and hopefully a
remedy?
Many thanks
JustinThis seems to be related to Bug# 3537056.
Please contact Worldwide Support and register that you are running into this bug. Unfortunately, the bug doesn't list a workaround at present.
Once you have correctly set SelectMethod=Cursor and passed the -Djbo.sql92.locktrailer=null runtime parameter to avoid using the FOR UPDATE clause, you hit an issue when the UPDATE statement is issued that our developers are looking into. -
Hi all,
I have an error which doesn't for some reason always rear
it's ugly head.
Basically it's part of the repeat region/move to record
functionality of
DreamWeaver 8
The error message is:
Microsoft OLE DB Provider for SQL Server error '80040e14'
Could not find prepared statement with handle -1.
This is the code block:
' reset the cursor to the beginning
If (MM_rs.CursorType > 0) Then
MM_rs.MoveFirst
Else
MM_rs.Requery ' this is the offending line
End If
I'm working with ASP vbscript with SQLServer 2005
Does anyone have any ideas what is going on and hopefully a
remedy?
Many thanks
Justinno reply so far but I found some hints on the net. Something
to do with the
data type or bytes. Couldn't work a solution so...
A work around is to revert to pre "SQL Injection" recordset
update what ever
update that was. Essentially use MX recordset. I've not had
the error
since...
Would be nice to know what is going on and a proper solution
but until
then... -
Scheduled Recordings not recording
Why are my scheduled recordings not recording. Sometimes the record light is on lilke it is but if I check my show is not listed. This goes for movies as well as series recordings.
You could try using other TV software, but that may not work either as it looks like your broadcaster is protecting some programmes to prevent recording, for copyright reasons.
-
Can not record the animations of my software
I have just started using the software. I was very excited
how easy it was to use and record a demonstration of our new
imaging software. But when I played it back in Preview it did not
record or show the animations that are in our software between
screen clicks.
How do I get it to do that.Okay, is it possible to create a movie in the "normal" way,
using regular recording (demo / assessment / etc.) and then go back
and get the "action" using a new movie using FMR mode. Then you
could import or copy/paste the full-motion into the original movie.
Does that make sense to you? I'm a little handicapped not knowing
what you are recording, or wanting to, exactly. HTH! -
No required validation windows wnen move next record
Hi master
Sir I have master detail block
In master block key-commit I put this code
if :ystatus ='P' then
message('Can not be update becuase this year Completely Closed');
message('Can not be update becuase this year Completely Closed');
go_item('voumaster.entdate');
elsif :ystatus ='T' or :ystatus ='N' then
commit_form;
go_item('voudetail.accid');
end if;
means if condition true then commit other wise not commit
and in detail block I put this code in key-commit event
if :ystatus ='P' then
message('Can not be update becuase this year Completely Closed');
message('Can not be update becuase this year Completely Closed');
go_item('voumaster.entdate');
elsif :ystatus ='T' or :ystatus ='N' then
IF :ITEM62=:ALLTOTAL THEN
commit_form;
go_item('voumaster.entdate');
ELSE
MESSAGE ('RECORD NOT SAVE BECUSE DEBIT AND CREDIT NOT BALANCE');
go_item('voDETAIL.CREDIT');
END IF;
end if;
sir when I change in master block then system not give me error then check condition if true then save otherwise move entdate textbox
but
when I change in detail block and press F10 then system not give me error and move entdate textbox but when I change record or go next previous record then system give me error do you want to save then change you have made?
Yes no cancel Button
Sir my need is system not required this message and easily go to next record only when I press f10 then show message and save my record
Please give me idea where I put my code or which event I disable
Thank
Aamirthank for your reply
sir i use your code
message('Can not be update becuase this year Completely Closed');
pause;
but not sovle my problem
sir my problem is when i change in detial block and go to master block without save detail block in master block i move to next record then system give me save validation windows
i not need validation window when move mext record and move next record without save detail block
please give idea
thak
aamir
Maybe you are looking for
-
'CommonResults' conflict in TestStand 3.5
I have 105 sequence files. One main seq files calls other subseq files. The structure is 4 level deep, if I not mistaken. But every time I run the file, through 'Test UUTs', 'MainSequence', or 'SinglePass' entry point, I get the sequence editor di
-
How to ''move'' the pictures in mac os x
I had windows before and when u open a picture in windows, u just press arrow key (right) and it moves to next picture. How can I do this in mac? If i open the folder and view them in ''cover flow'' ( i think thats it) the pictures arent really big b
-
Integration Engine -- Configure Sender/Receiver ID
All, I'm trying to configure senders and receivers (using SAP PI 7.1) in order to prioritize messages afterwards... My SAP ECC 6.0 system will send idocs (= business system) and my receiver is a business component. Configuring my send is no problem.
-
Join Rich Shupe in Minneapolis for the day-long workshop "Learning Actionscript 3". This one-day workshop will help get you started using AS3 whether you have experience with AS1/AS2 or are just getting started. The 5th Annual Flashbelt Conference is
-
We have an Apple e TV 1st generation. We want to use AirPlay. When we go to Software Update, under settings, general, we get this message - There is no update available. Apple TV can't check right now. Try again later The wiFi is connected and workin