Fading Effects in and then out...

Bit of a confusing question so here it goes...
I've got a multi track project set up with 10 tracks of drums - What I'm looking to do is start the song of with heavily effected drums sort of spacey/big reverb thing which I can do but I want to stop the effect at the verse and just have them normal again.
Basically is there a marker I can set to do this or is it more complicated?
Cheers :o)

Oh dear - without sounding too patronising, you might be better off going back to Garageband!
This kind of thing is really basic mixer routing.
Set up a reverb on an aux channel, and use sends from your drum tracks to the aux channel. Then just automate the sends, and/or the aux channel levels and the appropriate points in your song.

Similar Messages

When i open itunes its normal and then out of nowhere it says "itunes has stopped working" and i have to click 'close program'. help?

when i open itunes its normal and then out of nowhere it says "itunes has stopped working" and i have to click 'close program'. help?

Having the same issue here....a quick fix is to just minimize the window, and immediately maximize it. It will now fit the screen. Trouble is, after you close it, you'll have to do it again when you re-start itunes. The good news is it takes all of about 2 seconds. Apple should fix this. Should.

HT1454 HELP! ITook loads of photos on my ipod touch, and when i went to look at them they were just black images , and then out of 50 bout 7 of them came out?anyone know how to get the black pictures turn out ?

HELP! ITook loads of photos on my ipod touch, and when i went to look at them they were just black images , and then out of 50 bout 7 of them came out?anyone know how to get the black pictures turn out ?

Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup

After I did a change in the drumsection on a song the program just "went down". It's impossible to go back tinto the program. It just tryn to open the song, nothing happend and then out again... What can I do?

After I did a change in the drumsection on a song the program just "went down". It's impossible to go back tinto the program. It just tryn to open the song, nothing happend and then out again... What can I do?

see if anything in this troubleshooting article helps: http://support.apple.com/kb/HT2801?viewlocale=en_US

I still distribute most FCP projects via DVD. No matter which MPEG2 setting I use in Compressor 4 I get an error - even Apple's default DVD setting. Has anybody successfully output an FCP X project to compressor and then out on a DVD?

I still distribute most FCP projects via DVD. No matter which MPEG2 setting I use in Compressor 4 I get an error - even Apple's default DVD setting. Has anybody successfully output an FCP X project to compressor and then out on a DVD?

Anthony, thank you very much - this works, though I thought I had tried your process previously without success. I've tried so many things who knows. I've had zero luck going with the Send to Compressor or Export Using Compressor Settings under the Share menu. I'm also finding Compressor 4 to be a real dog on my system even though I have a brand new quad core machine with 8G of RAM. Prior to receiving your post I did come up with a different work process. Using Export Movie from FCP X and then loading the result in Compressor 3 works flawlessly. Thanks again!

How do I generate a pulse with a user specified puse duration, down time and repitition, and then out put to a graph?

How do I generate a pulse with a user specified puse duration, down time and repitition, and then out put to a graph and then to daq ports?
I used lab view in engineering class, but that was the extent of my usage and after fiddling around in lab view and looking on the web looking for solution, I could not produce desired results. My professor wants me to produce something that will output a pulse for a specified duration, then downtime for another specified duration and then repeat the process a specified amount of times.
I am using labview version 7.1
Thanks in advance.

Hello,
Are you using hardware (DAQ card) to generate this pulse or are you planning on doing this all in software. If you have a DAQ card in LabVIEW you can go to Help » Find Examples and then select Hardware Input and Output » DAQmx » Generating Digital Pulses » Gen Dig Pulse Train-Finite.vi. This will use a counter from your DAQ card to generate a finite number of pulses at a specified frequency and duty cycle. Give this a try, or let me know if you are not using hardware, and we can figure something else out.
Regards,

How is it best to keep files synced between iMac and Macbook? I work from home on my iMac and then out in meetings on my Macbook and need to have access to the same files on both.

How is it best to keep files synced between iMac and Macbook? I work from home on my iMac and then out in meetings on my Macbook and need to have access to the same files on both. The folders are using Microsoft programmes as this is compatiable with 90% of my colleagues, therefore I can't use the Icloud service.

No, the camera connection kit only supports the copying of photos and videos to the Photos app, it doesn't support copying content off the iPad. For your second camera instead of the SD reader part of the kit, does the iPad to camera cable not work with it for direct transfer to the iPad ?
For Lightroom and Nikon software again no - you can only install apps that are available in the iTunes app store on your computer and the App Store app on the iPad, 'normal' PC and Mac (OS X) software are not compatible with the iPad (iOS). There are some apps that perform fairly basic editing functions that are available in the store, but nothing as sophisticated as, for example, Lightroom.

IMac just mad a loud crackle, very loud snap and then out

I think I'm screwed. My iMac just mad a crackle sound followed by a loud snap and then it went black out our. My spike bar is still running and so are the other computers, etc. that are plugged into it.
I have an external Hard drive attached and it shut down too.
Anyone have any thoughts?
Thanks, Tom

Hey Big,
I know what you said about investing in a 9 year old g3 but this is more of a hobby for me right now. I plan on maybe giving it to my son so he can browse the internet with it.
I've got my two kids on a 400 and a 600 iMac respectively. They're 8 and 9 and spend a lot of time on the Internet.
That being said i hooked up my ethernet cord to it and for the life of me i can not figure out how to get online in os9.
And you also said something about updating the firmware, how do i check the firm ware and if i do need to update it?
Look under the Apple > system profiler > production information. It should reat 4.1.9 f1 if it reads something like 3.0 something it needs to be up dated.
Do i need a internet conection to update the firmware?
It would help it's not necessary but can be a pain without it. I have a burned CD with the updater on it since I work with so many iMacs.
Look here:
http://docs.info.apple.com/article.html?artnum=106877
And do i need to start new questions for these?
It would allow more people to see your post. Often things posted at the bottom of a "solved" post will get ignored.
I was also looking at HD on ebay
Hard Drive??
and some had osx already installed. Is that a good idea and if yes how do i know if my machine will run the version i get?
You wouldn't. These iMacs will run on 10.4.11 with enough RAM installed. At least 512.
I'd look for a Panther installer or a Tiger but they will have to be on CD since that's what your iMac came with.
Richard

How to encrypt/decrypt xml data into, and then out of IDS?

Hi,
How would we encrypt NPPI information being passed from an unencrypted xml through IDS, and then decrypt it on exit prior to Gendata.
The IDS SDK gave a reference to IDSEncryptionRule(), but insufficient examples of implementation.
It could be something like a single tag element, or even the entire xml, it's just not clear how to make it happen using native IDS methods.
Any thoughts or help to implement this security measure would be most welcome!
Thanks so much!
Edited by: lodit on Apr 10, 2013 2:56 PM

Hi there,
You would need to write a custom IDS rule that implements this function. You can refer to the IDS SDK book for info on writing a custom rule. IDSEncryptionRule does operations based on the request state received. Normally when an IDS rule is executed, the rules in the request type definition are executed with the RUN_FORWARD request state. Then they are executed with the RUN_REVERSE request state. An example of why this model is used would be the ATCReceiveFile. On RUN_FOWARD, it writes the contents of file segments in a message to a temporary file. Subsequent rules execute. Then on the RUN_REVERSE, the ATCReceiveFile does clean up routines to remove the temporary file.
So, armed with that knowledge, you can use the IDSEncryptionrule to perform on RUN_FORWARD (decrypt message variables for subsequent processing by Documaker) and then on RUN_REVERSE (encrypt message variables to send back to the client).
It should be apparent at this point that you need to use an encryption/decryption mechanism with the IDS client otherwise you won't be able to prepare the message to send or read the response. On the client side there are functions - consult the examples included in the IDS SDK (DSI_DSK in the installer package).
--Andy

I want to fade music in and then out

I've successfully added audio portions to the slideshow but I need more control over the start and stop point and would love to fade the music in and out instead of just abruptly start and stop during the slides.. Is there a way to tweak the music clip and fade in and out?

I'm not sure what it is your asking here.
iPhoto cannot manipulate sound, so if you want to fade in and out you need to use another app,
Alternatives to iPhoto's slideshow include:
iMovie, on every Mac sold.
Others, in order of price: PhotoPresenter $29
PhotoToMovie $49.95
PulpMotion $129
FotoMagico $29 (Home version) ($149 Pro version, which includes PhotoPresenter)
Final Cut Pro X $299
It's difficult to compare these apps. They have differences in capability - some are driven off templates. some aren't. Some have a wider variety of transitions. Others will have excellent audio controls. It's worth checking them out to see what meets your needs. However, there is no doubt that Final Cut Pro X is the most capable app of them all. You get what you pay for.

Audio and video out of sync on short recordings

I've scanned the discussions and see that alot of posters are experiencing
the same problem I'm having which is recording quicktime movies
and getting audio and video out of sync.
In most of those posts the responses seem to be that the problem gets
bad if you're making a long recording. I'm experiencing that, but...
...I'm also having the same problem on really short recordings...less than a
minute. I've coming video and audio out of my cable box, into a SONY DSR-11 VCR, then firewire out of the deck into the computer, recording the movies with Quicktime 7.1.6.
I know it's coming out of the cable box and then out of the SONY deck via firewire in sync because when I log and capture through Final Cut Pro, audio and video are in sync in preview and playback. I don't want to use Final Cut Pro to capture the movies because I want to end up with MPEG4, and I'd have to go through an extra conversion process out of FCP.
Any thoughts on why even short recordings through Quicktime are out of sync?
Thanks.

I'm having similar problems transferring VHS video to Quicktime. Another problem I'm having is when I transfer a VHS video to iMovie and then export the video to H.264 format, I have similar sync problems, even though the iMovie seems perfectly in sync.
I'm going to try to transfer several alternative video formats (video from my cable DVR, Video from live TV, and video from a digital mini cassette to try and figure out whether the VHS format is the culprit. Will keep you posted.

I'm getting a general error message then out of memory trying to add a new sequence

Anyone know how to fix?? i am getting a general error message and then out of memory when adding a new squence?? Help!

The General Error warning is usually associated with incompatible files.
Out of Memory can be caused by corrupted clips, incompatible files and still images that use a color mode other than RGB.

Internet goes slow for like 5 minutes, and then goes up again?

So, yea, i've been experiencing this problem a lot. I'm playing a game, and then, out of nowhere, I start getting 300-400 ping, and I can't even play it. Then, like 5-10 minutes later, I start getting my ping back. This only happens on my Mac. My family has other 2 computers, and that doesn't happen in theirs.
Specs:
Macbook Pro 13in Mid-2012 running Version 10.9.4.

Don't complain, apple is not to eat

My lightroom 5 cc keeps freezing up and then turning all files gray! Help!

I just got a new IMAC 27 inch and converted everything from my old 27inch IMAC to the new. My lightroom works and then out of nowhere it freezes and has the spinner going and I have to force quit. When I go back in to lightroom all my files are just gray numbers! HELP!

other files is not garbage it's podcasts and storage used by apps and the likes
you keep getting them because you keep installing stuff that take up the space

If my iphone, ipad, MAC and macbook pro are all linked, and then I upgrade only my phone to iOS 7.0, does that have an effect on my calendar, etc. It doesn't seem to be showing the same data it was before the update. Lost lot of info from calendar.

If my iphone, ipad, MAC and macbook pro are all linked, and then I upgrade only my ipone to IOS 7.0, does that have an effect on the linking to my other MAC products. It seems my calendar has lost a lot of information since the upgrade.

If you purchased Lion for your iMac, just log into the Mac App Store from your MacBook using the Apple ID under which you purchased Lion and go to the Purchases page. You will be able to download and install Lion there.
searching the internet i found a link to upgrtade to 10.7
The only place you get get Lion is from the Mac App Store. If you found some other site, that was an illegal copy and almost certainly tied to someone else's Apple ID and hence unusable by you. If the link was just to the Mac App Store, see above.
As to the problem with synchronization to iCloud, that's not a 10.6 question, so I'd suggest you take up that specific issue in either the Lion or iCloud forums, providing full details, and someone there can probably help you sort things out.
Regards.

Fading Effects in and then out...

Similar Messages

Maybe you are looking for