Fading to black screen
Is there a sleep mode on iPhone 4s thAt would cause screen to fade to black all night and then be fine in the morning? My phone was fading to black from 11pm to 9 am. Now it's fine!
Please help!!!
Try Resetting the PRAM
Similar Messages
-
IPhone 5 screen went green and blue and then faded to black?
I was on my iphone and had messages open and than the screen just froze and turned blue and green and than slowly faded to black and now won't turn on. When i plug it into the wall it doesn't do anything. The phone is still on because my dad called the phone and it still rings. It has a glow to it too when it is in the dark so the screen must be on or something, i don't know. Any help please!!
See Here for > Frozen or unresponsive iPhone
Try this First... No Data will be Lost...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons... -
Spontaneous black screen with Zen V Plus. / Where do I send it
Dear Creative,
I purchased a 2GB Zen V Plus roughly four months ago. It was a present to myself and a tool to accompany me on my long flight. (You see, I was about to spend 9 hours on a plane as I moved to the United Kingdom.) Before I purchased this lovely device, I did extensi've research. I had planned on buying an MP3 player that exhibited the features I wanted AND would last quite a while. Everything I read about the Zen V Plus was perfect. Not a complaint in sight.
Until today.
Over these past few months, I haven't actually used my Zen V very often. I can count on one hand the amount that I actually have used it. Once on a short walk to post office. Once on a walk to ASDA. Once whilst I was hoovering and waiting for my laptop to come in the post. Plus, the flight across the Atlantic -- about 2 hours continuous use. The rest of these four months, my little Zen V has been nestled away in its case, in my nightstand drawer, next to my bed.
Now that you know all this, I'm sure you can imagine my surprise when I pulled it out of its case this afternoon and discovered my screen was drastically faded. My initial thought was that it may be a problem with the contrast. So I inserted a thin object into the reset slot and powered my Zen V back on. This is when I discovered, well, nothing. A plain black screen. No lines, no text, no glow -- nothing. My buttons still glow with the blue color they always have when my Zen is powered on. Plus, when I push 'play' music happily sounds through my earbuds.
After I discovered that my precious Zen was broken, I quickly took to the Internet to find a solution. But what do I find? Several cases like mine strewn across message board after message board. Even a search for 'black screen' on the forum I'm currently posting this to returns with ten results.
Is this a problem with 'firmware' or is this a problem with design? Did you acti'vely know about this problem when these devices were tested and 'OK'd to ship? A better question is, do you care? Why is there no recall and why is there no repair time faster than two months?
Furthermore, I'm well under my warranty expiration date. It comes with a year from the date of purchase, no? The downside of this is that every bit of my Zen V paperwork is back in a box, within a box, within my storage unit in the USA.
So now that you know my problem, please help with a solution. How do I pursue repairs on my Zen V Plus? Where would I send it within the UK? Is my warranty still valid now that I've moved? If not, what will the price be to repair? Etc etc.
Don't get this letter wrong. The times that I've used my Zen V, I've absolutely loved it. It's a very nicely packaged mp3 player with some equally nice features. Trouble is, I expected it to hold out a bit longer than /3 of a year.
Love,
VraiYep. Tried that. A few of times, actually. I tried to 'update the firmware' also. I did this blindly (more or less) as I couldn't actually see the screen. I just followed the physical instructions and tried each possible thing you could. I'm not actually sure if I ended up repeating myself. Did it about eight to be sure. I think there are only four options on the menu where you can access the firmware.
-
CS4: Flashing black screens between clips after exporting
I'm having some trouble with a particular project when exporting video, and I can't seem to track down the cause. The primary problem is flashing black screens between clips, with the additional problem of occasionally having a clip that I fade to be completely black (ie, the first clip just fades to black instead of fading to the second clip).
I say "occasionally" because the problem seems to migrate depending on what I do to try to fix it. I've noticed that if I shift the clips .1 seconds one way or another where there is a black screen, it will sometimes fix the problem, but when I fix one of them the exact same problem will pop up in another place where it didn't exist before. I can also export a few seconds of video where the problem occurs independently of the rest of the project and the issue won't occur, but will then reoccur in the same place if I export the project as a whole. All of the video is from the same source and is in the same format (.MOV from a Canon 7D). I've edited plenty of other stuff from the same source on the same computer, and the only other time I've seen this problem it's been fixed by just shifting the clips a little bit in the timeline as mentioned above. If anyone can suggest ANYTHING I can try to troubleshoot this problem I'd really appreciate it, because right now this is driving me up the wall.I've been exporting to h.264 exclusively so far. Below is a screenshot of where one of the offending screens appears between the two clips on the timeline (the yellow in the bar up top is there because I had stepped that clip back .1 seconds like I mentioned earlier and not re-renered the sequence). I've also verified that this particular spot shows no black screen on the Program Monitor - it's a completely smooth jump from one cut to another. Please let me know if you see anything that might be causing this!
-
Black screen with a thick white vertical line down the middle?
I turned my iPod touch 5 off, it was at about 10%. I turned it back on a few minutes later and there was the apple logo, as usual, but with small white writing on the black background. Then, I plugged it into my charger, and the logo and writing faded away. Instead, there then was a black screen with a thick white vertical line going down the middle, and it seems to be stuck like that. What happened and how do I fix it??
Note: My home button is stuck and does not work. Also, I never updated my iPod to iOS 7.Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recovery mode,
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I changed the battery thing a few times from "better performance" to "energy saver” about 4 times over a period of a few hours, it would act like it was switching from the regular screen to the screen saver, but the screen saver never came up. And sometimes this would happen while I was working, so it shouldn't be going to the screen saver at all. The screen would be black, but still lit up. I tried to press buttons to get it to the desktop, but it wouldn't do anything. It was in between asleep and awake. I had to restart it by holding down the power button.
The next day, I changed the battery setting again to try to fix it, but it did this same thing in a shorter amount of time (like 5 times in 5 minutes) The last time, it started "breathing" like it was turning on, but it never actually came on. I had to disconnect the battery to get it to stop.
Then, this morning, it worked fine for a few hours, but again while I was working, it did the same thing. I just restarted it again, but this time it didn't even come on. It went straight to the dark, lit screen. I turned it off and waited awhile. The next time I tried it, it went straight to the dark screen.
So, each time I would try it, it would boot less and less before finally dieing. The whole time the battery was fully charged. It would do it when it was plugged in and when it wasn't. I could hear the computer running.
Any comments? I just don't know what's wrong or what to do. From reading this, I think it would be the failed logic board problems with the battery problems, but like I said, the whole time the battery was fully charged.I demonstrated this behavior at the Apple Store on 11/2/2013 on my machine and in their test environment. It is easy to reproduce and easy to avoid. I've provided details in this thread: https://discussions.apple.com/thread/5475679.
When the display turns off, it goes through three stages: 1. the screen dims, 2. the screen goes black, 3. the keyboard backlight turns off. Tapping the spacebar or swiping the trackpad anytime during stage 1 will reset the timer. Tapping the keyboard or swiping the trackpad during stage 2 will freeze the black screen with the keyboard lit up. Waiting until stage three to tap the spacebar will wake up the display and everything is fine.
There is less than a one-second window between stages 2 and 3 while the screen is black but the keyboard is still fading that touching the input devices will hang the machine.
This can be reproduced on all mid-2013 MBA's, fresh out of the box, running Mountain Lion or Mavericks. Getting a new machine will not fix it, unless they do a hardware upgrade to fix it. -
Experiencing Black screen/ Computer is on but screen looks like it is off.
Well recently i have been noticing that the screen on my all in one desktop has been going dark. Not like the usually hibernating kind of dark screen but more so computer it off screen. There was even a point in which i was in a messaging program and the screen went really dark in the middle of my typing. No messages about the graphic failing or anything like that showed up so im abit scared that my computer may be dying. I have been rummaging through this support forums and looking for people with similar issues and i came across something that said the Bios may need to be updated of something to that extent. SO, i have been trying to figure out how to do that but when i search my product no updates show up or anything so im beginning to think my product has become obselete. That being said how would i go about getting these update i so crucially need and how can i prevent my computer from dying. All help will be greatly appreciated and i do need a computer because my family is starting a business and this computer is a vital role in said business.
*Key Details*
- HP Pavilion 20-b210z All-in-One CTO Desktop PC (ENERGY STAR)
- Screen has been Fading/going black
- Looking for info on how to update BIOS
- Preformed a factory restore i January if i recall correctly.
- Also when i go to the support page i cant even identify my machine
- Support pages has no updates listed (kinda seems as though my product has been forgotten)Hi @Xhinzo,
Here is the product page for your computer. You can check the Software and Drivers section and use Option 2 if it's not able to detect your specific product, then select your operating system and see what's available.
When the screen goes dark, if you shine a flashlight on it can you see anything in the darkness? I'm wondering if it might be a hardware problem -- maybe the backlight is going out. Have you tried using an external monitor or connecting it to your TV, to see if the darkening problem occurs on a separate screen?
Please click the thumbs up button to say "Thanks!"
Clicking "Accept as Solution" on a reply that solves your problem makes it easier for other people to find solutions.
I am an HP employee. -
Satellite P10: white and purple clouds fading across the screen when booting
I had been having problems with my SP-10 laptop so I bought a new hard drive (Fujitsu 60GB instead of standard 40GB) and fitted it myself. I was working fine with this for a long time until suddenly I had the strangest problem I have ever seen on a computer...
Sometimes, when booting the laptop, instead of the normal red "TOSHIBA" screen and the Windows XP startup message, the laptop simply shows some weird white and purple clouds fading across the screen, eventually fading to a very dark but not quite black screen.
I thought to begin with it was a problem with the DVD drive, as when it finally gave in and booted normally, the DVD drive was disabled. However, I have noticed in the BIOS, under "Advanced" that the InfraRed Port shows intermittently - it shows with the [Disabled] setting next to it, but will then disappear from the listing, then reappear again, and then go again and so on.
Sometimes my computer will be operating normally, then completely lock up (mouse and all) and will reboot with the clouds!
I have looked in the Windows Event Viewer for when the notebook has locked up and have seen something to do with an IRQ problem for the Infrared Port. I disabled the InfraRed port in Device Manager (I managed to enable it in the BIOS by loading standard BIOS settings) and restarted, but it started up with the clouds again, so I have a feeling the InfraRed port is the culprit - perhaps faulty hardware/loose connection as it is located quite close to the DVD drive and HD drive.
I was just wondering if anyone has ever seen anything like this before on ANY computer, and if they knew how to resolve it? It seems completely illogical that a faulty IR port could alter what is displayed on the screen at bootup, unless of course there is something wrong with the boot sector of my HD?
Any ideas?
Thanks.
TomWell I can assure you my laptop has an InfraRed Port on it - I used to use it with my mobile phone for various things but don't bother now.
Good idea about attaching another monitor - hadn't thought of that. I will see what I can come up with.
I simply don't understand how anything except the display driver could be causing this, unless of course, another piece of hardware is conflicting with the display driver. But then why would it be intermittent and not constant? Anyway, I don't seem to have had the problem since I disabled the IR port (except the first time I disabled it) so here's hoping it's fixed.
Will definitely try attaching another display though. Good thinking.
Thanks,
Tom -
Black screen problem dv6-3120us
Ive been having overheating problems and my brother stepped on my screen. Ever since then my laptop screen has been fading in and out at random times. It would be working one minute then just fade to a black screen. I was looking online and saw that it could be my motherboard so Im wondering if that is the problem and if so do i have to replace the whole thing, or is it another problem and not my motherboard at all.
Hello AA-DRE,
You’re having a problem with the display shutting off.
Go into device manager and uninstall the display adapter. Restart the computer.
This will uninstall and reinstall the driver for the graphics.
Here is a link to device manager.
Check to see if you’re still having the problem.
Do a hard reset.
Turn the computer off.
Remove the power cable and the battery.
Hold down the power button for 15 sec while booth power sources are removed.
This should reset the hardware in the computer.
As you turn it back on tap the F10 key. This will load BIOS setup utility.
If you’re having the problem on this screen your hardware has gone out on the computer.
Press F9 to load defaults.
Press F10 to save and exit.
If you were having the problem in BIOS you can connect an external monitor to the laptop to see if the problem is with the graphics/motherboard or the monitor.
If it doesn't happen on the external monitor you need to replace the display on the laptop.
Let me know how everything goes
Have a good day. -
HAVE NEW 13.3 MAC AIR (previously, still have 13.3 MCbook pro which works captures what I am looking for an answer to)
when i open sites in safari the page opens fine if it is not a pdf based page.
Once i open a site that has a link to another page that is a pdf based page the page comes up as a black screen with no info showing
If I open a site that gices me an open to save a file to a word, excel type document or a pdf , everything works fine until I try to save the information to a PDF and again the screen goes black
I have tried the safari help site but to no avail, does anyone have a solution to thid problem. (I do have the abode ofr mac program loaded)If you delete all the Adobe Reader stuff it will probably fix this. For almost everything, the Apple pdf handling works better.
-
Start-up problems, black screen or open firmware
My iBook G4 1.33GHz Dual USB, with 1 gb RAM memory has been troublesome lately. It's installed with the latest version of OS 10.4.9
When starting up the ibook, it will sometimes only show a black screen after the boot chime. Repeated force restart sometimes makes it boot up the open firmware (white screen).
Then I see the error message:
"Illegal instructions at: %SRR0:ff85e778 %SRR1:00081000"
When I continue on with "mac-boot", I get the blue screen with a question marked box. So it can't find the startup disk.
This usually only happens when I'm done working for the day and close the lid on my ibook without manually clicking on the sleep mode when I put in in my drawer,. I've seen several times that the screen is still on when I close the lid, so it will continue to burn battery time.
I've managed to get the ibook to boot properly after removing the battery and letting it "cool-down" for 15-20 min. Also, zapping pram, vram sometimes works, but I don't know how much that actually helped. It worked once when I typed in the reset-nvram in the open firmware screen too.
I'd rather not have this happen at all! Any suggestions? Is this the much-talked about RAM memory failure?
Any suggestions would be very appreciated.
Message was edited by: antony chenHI,
*"I get the blue screen with a question marked box."*
That can mean several things. One, the drive is failing. Two, your iBook can't find a System Folder to boot from. Try booting while holding down the Option key which will prompt the Startup Manager window.
MemTest
Boot from your install disk and check the hard disk for errors.
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window where you see Capacity and Available. Make sure there is always 15% free disk space. Not enough disk space can cause directory corruption.
If you cannot boot from your install disk, try booting in Safe Mode
A flashing question mark appears when you start your Mac
Carolyn -
My iMac 8.1 (10.6.8 ) was slowing down and had recurrent permissions problems, mostly with Java. I backed everything up, and then re-installed from time machine. Now all I get is a black screen which says I need to reboot. Power+D gives me a hardware error message: 4 MOT/1/40000003: HDD-1336 or HDD-1327. When I reboot from the OSX CD and start disc utilities everything checks out OK. When I reload 10.5.2 from the OSX CD everything seems to work OK and no more permissions problems. But then I loose all my email and safari stuff. Anyone have any ideas short of going back to my old PC?
DonM. wrote:
Hi
Thanks for the help. No point in fooling around with it any more. Will I be able to use it as a monitor if I get a mimi mac?
Cheers. Don
No unfortunatley it's too old, you are referring to Target Display Mode which became avialble in 2009, your 2008 needs to have the HD replaced. I'd still do that if everything else is OK or you can simply buy a new MM and display or even a new iMac or an Apple refurbished iMac to save money. -
A movie I bought a while ago will no longer play, instead it just shows a black screen and no audio. All of the other movies in my library play fine. Any ideas as to whats going on or how to fix it? Thanks for any help.
Hi 22chill,
I recommend that we delete and re-download the movie from your purchase history:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Thanks,
Matt M. -
as of today when i plug my 7th generation ipod that i just got for christmas 2012 my pc shuts down to a blue screen with alot of writing then to black screen with alot of writing then to an all black screen then and windows error message my computer is ingood condition no malicious malware and has been clean i need help
thank ycjlet me get back with the answer with what the messages say on the blue screen and the black screen if i can read them fast enough before it shuts down i have windows 7 professional
-
[solved]black screen with xorg 1.6 after resume (intel)
after upgrading to xorg-server 1.6 no matter if i use s2ram or s2disk, first resume works fine, the second suspend and resume results in a black screen without any chance to swich to any tty.
i have read about bug like this which was resolved with using intel legacy driver. however my problem still occures.
maybe there is some module i should load/unload/reload on hibernate/wake-up?
here is my xorg.conf, lspci, Xorg.0.log.old (the one i had to kill with black screen) and Xorg.0.log
xorg.conf
Section "ServerFlags"
Option "AutoAddDevices" "False"
Option "DontZap" "false"
EndSection
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Cursor" "SendCoreEvents"
InputDevice "Stylus" "SendCoreEvents"
InputDevice "Eraser" "SendCoreEvents"
EndSection
Section "InputDevice"
Identifier "Cursor"
Driver "wacom"
Option "Device" "/dev/ttyS0"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"
Option "KeepShape" "on"
Option "Mode" "Absolute"
Option "BottomY" "18432"
Option "BottomX" "24576"
EndSection
Section "InputDevice"
Identifier "Stylus"
Driver "wacom"
Option "Device" "/dev/ttyS0"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"
Option "KeepShape" "on"
Option "TPCButton" "off"
Option "BottomY" "18432"
Option "BottomX" "24576"
Option "Mode" "Absolute"
EndSection
Section "InputDevice"
Identifier "Eraser"
Driver "wacom"
Option "Device" "/dev/ttyS0"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"
Option "KeepShape" "on"
Option "BottomY" "18432"
Option "BottomX" "24576"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "extmod"
Load "xtrap"
Load "dbe"
Load "dri"
Load "glx"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "base"
Option "XkbModel" "pc105"
Option "XkbLayout" "de, ru"
Option "XkbVariant" "nodeadkeys, winkeys"
Option "XkbOptions" "grp:caps_toggle"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 915GM/GMS/910GML Express Graphics Controller"
BusID "PCI:0:2:0"
Option "FramebufferCompression" "on"
Option "AccelMethod" "EXA"
Option "Tiling" "on"
Option "TrippleBuffer" "true"
Option "MigrationHeuristic" "greedy"
Option "RenderAccel" "true"
Option "ExaNoComposite" "false"
Option "EnablePageFlip" "true"
Option "DRI" "on"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "dri"
Mode 0666
EndSection
lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751M Gigabit Ethernet PCI Express (rev 11)
04:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 8d)
04:00.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 13)
04:02.0 Ethernet controller: Atheros Communications Inc. AR5212 802.11abg NIC (rev 01)
Xorg.0.log
X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux thinky 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
Build Date: 10 April 2009 07:03:14PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 14 19:27:54 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Cursor"
(**) |-->Input Device "Stylus"
(**) |-->Input Device "Eraser"
(**) Option "DontZap" "false"
(**) Option "AutoAddDevices" "False"
(**) Not automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/local,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0xa0080000/524288, 0xc0000000/268435456, 0xa0000000/262144, I/O @ 0x00001800/8
(--) PCI: (0@0:2:1) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0x68000000/524288
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "xtrap"
(WW) Warning, couldn't open module xtrap
(II) UnloadModule: "xtrap"
(EE) Failed to load module "xtrap" (module does not exist, 0)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.3.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input//wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Wacom driver level: 47-0.8.3-2 $
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "AccelMethod" "EXA"
(**) intel(0): Option "DRI" "on"
(**) intel(0): Option "FramebufferCompression" "on"
(**) intel(0): Option "Tiling" "on"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
(--) intel(0): Chipset: "915GM"
(--) intel(0): Linear framebuffer at 0xC0000000
(--) intel(0): IO registers at addr 0xA0080000
(II) intel(0): 2 display pipes available.
(**) intel(0): Using EXA for acceleration
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(II) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7872 kB
(II) intel(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1024x768
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.4.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000000 to 0x00000203
(WW) intel(0): PIPEASTAT before: status:
(WW) intel(0): PIPEASTAT after: status: VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 363776 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1455100 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xa0080000
(II) intel(0): [drm] ring buffer = 0xc0000000
(II) intel(0): [drm] mapped front buffer at 0xc0800000, handle = 0xc0800000
(II) intel(0): [drm] mapped back buffer at 0xc1800000, handle = 0xc1800000
(II) intel(0): [drm] mapped depth buffer at 0xc1c00000, handle = 0xc1c00000
(II) intel(0): [drm] mapped classic textures at 0xc2000000, handle = 0xc2000000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(**) intel(0): Option "MigrationHeuristic" "greedy"
(**) intel(0): Option "EXANoComposite" "false"
(II) EXA(0): Offscreen pixmap area of 12582912 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x00800000 (pgoffset 2048)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00c00000 (pgoffset 3072)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01800000 (pgoffset 6144)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x01c00000 (pgoffset 7168)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x02000000 (pgoffset 8192)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000005f820000 physical
(II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000005fe20000 physical
(II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000005fe21000 physical
(II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
(II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000005fe33000 physical
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled
(II) intel(0): 0x00c00000-0x017fffff: exa offscreen (12288 kB)
(II) intel(0): 0x01800000-0x01bfffff: back buffer (4096 kB) X tiled
(II) intel(0): 0x01c00000-0x01ffffff: depth buffer (4096 kB) X tiled
(II) intel(0): 0x02000000-0x03ffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): DPMS enabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Enabled
(WW) intel(0): Option "TrippleBuffer" is not used
(WW) intel(0): Option "RenderAccel" is not used
(WW) intel(0): Option "EnablePageFlip" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 270 x 203
(**) Option "Protocol" "auto"
(**) Option "Device" "/dev/input/mice"
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Mouse0: Sensitivity: 1
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(**) Mouse0: (accel) keeping acceleration scheme 1
(**) Mouse0: (accel) filter chain progression: 2.00
(**) Mouse0: (accel) filter stage 0: 20.00 ms
(**) Mouse0: (accel) set acceleration profile 0
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "base"
(**) Keyboard0: XkbRules: "base"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "de, ru"
(**) Keyboard0: XkbLayout: "de, ru"
(**) Option "XkbVariant" "nodeadkeys, winkeys"
(**) Keyboard0: XkbVariant: "nodeadkeys, winkeys"
(**) Option "XkbOptions" "grp:caps_toggle"
(**) Keyboard0: XkbOptions: "grp:caps_toggle"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(**) Option "SendCoreEvents"
(**) Cursor: always reports core events
(**) Cursor device is /dev/ttyS0
(**) Cursor is in absolute mode
(**) Cursor: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "KeepShape" "on"
(**) Cursor: keeps shape
(**) Option "BottomX" "24576"
(**) Cursor: bottom x = 24576
(**) Option "BottomY" "18432"
(**) Cursor: bottom y = 18432
(**) Option "BaudRate" "9600"
(**) Cursor: serial speed 9600
(II) XINPUT: Adding extended input device "Cursor" (type: Wacom Cursor)
(**) Option "Device" "/dev/ttyS0"
(**) Option "StopBits" "1"
(**) Option "DataBits" "8"
(**) Option "Parity" "None"
(**) Option "Vmin" "1"
(**) Option "Vtime" "10"
(**) Option "FlowControl" "Xoff"
usbDetect: can not ioctl version
(==) Wacom using pressure threshold of 15 for button 1
(==) Wacom General ISDV4 tablet speed=9600 (19200) maxX=24576 maxY=18432 maxZ=255 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Cursor" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
(**) Option "SendCoreEvents"
(**) Stylus: always reports core events
(**) Stylus device is /dev/ttyS0
(**) Stylus is in absolute mode
(**) Stylus: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "KeepShape" "on"
(**) Stylus: keeps shape
(**) Option "BottomX" "24576"
(**) Stylus: bottom x = 24576
(**) Option "BottomY" "18432"
(**) Stylus: bottom y = 18432
(**) Stylus: threshold = 15
(**) Stylus: max x set to 24576 by xorg.conf
(**) Stylus: max y set to 18432 by xorg.conf
(**) Stylus: max z = 255
(**) Option "TPCButton" "off"
(**) Option "BaudRate" "9600"
(**) Stylus: serial speed 9600
(II) XINPUT: Adding extended input device "Stylus" (type: Wacom Stylus)
(==) Wacom device "Stylus" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
(**) Option "SendCoreEvents"
(**) Eraser: always reports core events
(**) Eraser device is /dev/ttyS0
(**) Eraser is in absolute mode
(**) Eraser: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "KeepShape" "on"
(**) Eraser: keeps shape
(**) Option "BottomX" "24576"
(**) Eraser: bottom x = 24576
(**) Option "BottomY" "18432"
(**) Eraser: bottom y = 18432
(**) Eraser: threshold = 15
(**) Eraser: max x set to 24576 by xorg.conf
(**) Eraser: max y set to 18432 by xorg.conf
(**) Eraser: max z = 255
(**) Option "BaudRate" "9600"
(**) Eraser: serial speed 9600
(II) XINPUT: Adding extended input device "Eraser" (type: Wacom Eraser)
(==) Wacom device "Eraser" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
(II) config/hal: Adding input device ThinkPad Extra Buttons
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Wacom Serial Tablet PC Pen Tablet/Digitizer
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Macintosh mouse button emulation
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device TPPS/2 IBM TrackPoint
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Video Bus
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x04000000 (pgoffset 16384)
(II) intel(0): xf86UnbindGARTMemory: unbind key 5
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x04000000 (pgoffset 16384)
(II) intel(0): xf86UnbindGARTMemory: unbind key 5
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x04000000 (pgoffset 16384)
(II) intel(0): xf86UnbindGARTMemory: unbind key 5
Xorg.0.log.old
X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux thinky 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
Build Date: 10 April 2009 07:03:14PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 14 19:27:40 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Cursor"
(**) |-->Input Device "Stylus"
(**) |-->Input Device "Eraser"
(**) Option "DontZap" "false"
(**) Option "AutoAddDevices" "False"
(**) Not automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/local,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0xa0080000/524288, 0xc0000000/268435456, 0xa0000000/262144, I/O @ 0x00001800/8
(--) PCI: (0@0:2:1) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0x68000000/524288
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "xtrap"
(WW) Warning, couldn't open module xtrap
(II) UnloadModule: "xtrap"
(EE) Failed to load module "xtrap" (module does not exist, 0)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.3.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input//wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Wacom driver level: 47-0.8.3-2 $
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "AccelMethod" "EXA"
(**) intel(0): Option "DRI" "on"
(**) intel(0): Option "FramebufferCompression" "on"
(**) intel(0): Option "Tiling" "on"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
(--) intel(0): Chipset: "915GM"
(--) intel(0): Linear framebuffer at 0xC0000000
(--) intel(0): IO registers at addr 0xA0080000
(II) intel(0): 2 display pipes available.
(**) intel(0): Using EXA for acceleration
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(II) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7872 kB
(II) intel(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1024x768
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.4.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x10000000 to 0x000c0c00
(WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
(WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
(WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
(WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
(WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
(WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
(WW) intel(0): Register 0x68028 (TV_CLR_KNOBS) changed from 0x00000000 to 0x00606000
(WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
(WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
(WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
(WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
(WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
(WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
(WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
(WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710088
(WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x4e2d1dc8
(WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
(WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x800010bb
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
(WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
(WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 363776 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1455100 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] loaded kernel module for "i915" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xa0080000
(II) intel(0): [drm] ring buffer = 0xc0000000
(II) intel(0): [drm] mapped front buffer at 0xc0800000, handle = 0xc0800000
(II) intel(0): [drm] mapped back buffer at 0xc1800000, handle = 0xc1800000
(II) intel(0): [drm] mapped depth buffer at 0xc1c00000, handle = 0xc1c00000
(II) intel(0): [drm] mapped classic textures at 0xc2000000, handle = 0xc2000000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(**) intel(0): Option "MigrationHeuristic" "greedy"
(**) intel(0): Option "EXANoComposite" "false"
(II) EXA(0): Offscreen pixmap area of 12582912 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x00800000 (pgoffset 2048)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00c00000 (pgoffset 3072)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01800000 (pgoffset 6144)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x01c00000 (pgoffset 7168)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x02000000 (pgoffset 8192)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000005f820000 physical
(II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000005fe20000 physical
(II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000005fe21000 physical
(II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
(II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000005fe33000 physical
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled
(II) intel(0): 0x00c00000-0x017fffff: exa offscreen (12288 kB)
(II) intel(0): 0x01800000-0x01bfffff: back buffer (4096 kB) X tiled
(II) intel(0): 0x01c00000-0x01ffffff: depth buffer (4096 kB) X tiled
(II) intel(0): 0x02000000-0x03ffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): DPMS enabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Enabled
(WW) intel(0): Option "TrippleBuffer" is not used
(WW) intel(0): Option "RenderAccel" is not used
(WW) intel(0): Option "EnablePageFlip" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 270 x 203
(**) Option "Protocol" "auto"
(**) Option "Device" "/dev/input/mice"
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Mouse0: Sensitivity: 1
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(**) Mouse0: (accel) keeping acceleration scheme 1
(**) Mouse0: (accel) filter chain progression: 2.00
(**) Mouse0: (accel) filter stage 0: 20.00 ms
(**) Mouse0: (accel) set acceleration profile 0
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "base"
(**) Keyboard0: XkbRules: "base"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "de, ru"
(**) Keyboard0: XkbLayout: "de, ru"
(**) Option "XkbVariant" "nodeadkeys, winkeys"
(**) Keyboard0: XkbVariant: "nodeadkeys, winkeys"
(**) Option "XkbOptions" "grp:caps_toggle"
(**) Keyboard0: XkbOptions: "grp:caps_toggle"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(**) Option "SendCoreEvents"
(**) Cursor: always reports core events
(**) Cursor device is /dev/ttyS0
(**) Cursor is in absolute mode
(**) Cursor: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "KeepShape" "on"
(**) Cursor: keeps shape
(**) Option "BottomX" "24576"
(**) Cursor: bottom x = 24576
(**) Option "BottomY" "18432"
(**) Cursor: bottom y = 18432
(**) Option "BaudRate" "9600"
(**) Cursor: serial speed 9600
(II) XINPUT: Adding extended input device "Cursor" (type: Wacom Cursor)
(**) Option "Device" "/dev/ttyS0"
(**) Option "StopBits" "1"
(**) Option "DataBits" "8"
(**) Option "Parity" "None"
(**) Option "Vmin" "1"
(**) Option "Vtime" "10"
(**) Option "FlowControl" "Xoff"
usbDetect: can not ioctl version
(==) Wacom using pressure threshold of 15 for button 1
(==) Wacom General ISDV4 tablet speed=9600 (19200) maxX=24576 maxY=18432 maxZ=255 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Cursor" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
(**) Option "SendCoreEvents"
(**) Stylus: always reports core events
(**) Stylus device is /dev/ttyS0
(**) Stylus is in absolute mode
(**) Stylus: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "KeepShape" "on"
(**) Stylus: keeps shape
(**) Option "BottomX" "24576"
(**) Stylus: bottom x = 24576
(**) Option "BottomY" "18432"
(**) Stylus: bottom y = 18432
(**) Stylus: threshold = 15
(**) Stylus: max x set to 24576 by xorg.conf
(**) Stylus: max y set to 18432 by xorg.conf
(**) Stylus: max z = 255
(**) Option "TPCButton" "off"
(**) Option "BaudRate" "9600"
(**) Stylus: serial speed 9600
(II) XINPUT: Adding extended input device "Stylus" (type: Wacom Stylus)
(==) Wacom device "Stylus" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
(**) Option "SendCoreEvents"
(**) Eraser: always reports core events
(**) Eraser device is /dev/ttyS0
(**) Eraser is in absolute mode
(**) Eraser: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "KeepShape" "on"
(**) Eraser: keeps shape
(**) Option "BottomX" "24576"
(**) Eraser: bottom x = 24576
(**) Option "BottomY" "18432"
(**) Eraser: bottom y = 18432
(**) Eraser: threshold = 15
(**) Eraser: max x set to 24576 by xorg.conf
(**) Eraser: max y set to 18432 by xorg.conf
(**) Eraser: max z = 255
(**) Option "BaudRate" "9600"
(**) Eraser: serial speed 9600
(II) XINPUT: Adding extended input device "Eraser" (type: Wacom Eraser)
(==) Wacom device "Eraser" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
(II) UnloadModule: "mouse"
(II) UnloadModule: "kbd"
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) intel(0): xf86UnbindGARTMemory: unbind key 2
(II) intel(0): xf86UnbindGARTMemory: unbind key 3
(II) intel(0): xf86UnbindGARTMemory: unbind key 4
(II) intel(0): [drm] removed 1 reserved context for kernel
(II) intel(0): [drm] unmapping 8192 bytes of SAREA 0xf8079000 at 0xb78f7000
(II) intel(0): [drm] Closed DRM master.
anyone clue?
Last edited by lynucs (2009-05-09 18:38:01)took a look into everything.log.
that line looks pretty suspicious:
kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
it occures around the time i did the last resume.
here is a relevant snippet from everything.log:
Apr 14 18:35:57 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
Apr 14 18:35:58 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
Apr 14 18:36:00 thinky acpid: client connected from 9040[0:0]
Apr 14 18:36:00 thinky acpid: 1 client rule loaded
Apr 14 18:38:04 thinky ntpd[6265]: adjusting local clock by -87.862975s
Apr 14 18:42:04 thinky ntpd[6265]: adjusting local clock by -87.769493s
Apr 14 18:42:55 thinky acpid: client 6223[0:0] has disconnected
Apr 14 18:42:55 thinky logger: ACPI group/action undefined: ibm/hotkey / HKEY
Apr 14 18:42:57 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
Apr 14 18:43:07 thinky kernel: PM: Syncing filesystems ... done.
Apr 14 18:43:07 thinky kernel: Freezing user space processes ... (elapsed 0.01 seconds) done.
Apr 14 18:43:07 thinky kernel: Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
Apr 14 18:43:07 thinky kernel: Suspending console(s) (use no_console_suspend to debug)
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: PCI INT A disabled
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: power state changed by ACPI to D3
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Stopping disk
Apr 14 18:43:07 thinky kernel: serial 00:09: disabled
Apr 14 18:43:07 thinky kernel: ath5k 0000:04:02.0: PCI INT A disabled
Apr 14 18:43:07 thinky kernel: ACPI handle has no context!
Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: PME# disabled
Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: PCI INT B disabled
Apr 14 18:43:07 thinky kernel: ACPI handle has no context!
Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: PME# enabled
Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: PCI INT A disabled
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PCI INT D disabled
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PME# disabled
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: PCI INT D disabled
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: PCI INT C disabled
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: PCI INT B disabled
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: PCI INT A disabled
Apr 14 18:43:07 thinky kernel: ACPI: Preparing to enter system sleep state S3
Apr 14 18:43:07 thinky kernel: Disabling non-boot CPUs ...
Apr 14 18:43:07 thinky kernel: Extended CMOS year: 2000
Apr 14 18:43:07 thinky kernel: Intel machine check architecture supported.
Apr 14 18:43:07 thinky kernel: Intel machine check reporting enabled on CPU#0.
Apr 14 18:43:07 thinky kernel: Back to C!
Apr 14 18:43:07 thinky kernel: Extended CMOS year: 2000
Apr 14 18:43:07 thinky kernel: Force enabled HPET at resume
Apr 14 18:43:07 thinky kernel: ------------[ cut here ]------------
Apr 14 18:43:07 thinky kernel: WARNING: at kernel/hrtimer.c:625 hres_timers_resume+0x41/0x50()
Apr 14 18:43:07 thinky kernel: Hardware name: 1866WBA
Apr 14 18:43:07 thinky kernel: hres_timers_resume() called with IRQs enabled!Modules linked in: ipv6 aes_i586 aes_generic i915 drm i2c_algo_bit ext2 pcmcia psmouse thinkpad_acpi rfkill nvram i2c_i801 serio_raw iTCO_wdt iTCO_vendor_support i2c_core sg yenta_socket rsrc_nonstatic sdhci_pci sdhci pcmcia_core mmc_core video output uhci_hcd ehci_hcd usbcore intel_agp agpgart evdev thermal fan button battery ac fuse snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_intel8x0 snd_ac97_codec snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd soundcore ac97_bus ath_pci wlan ath_hal(P) arc4 ecb ath5k mac80211 led_class cfg80211 tg3 libphy cpufreq_powersave cpufreq_ondemand cpufreq_conservative acpi_cpufreq freq_table processor rtc_cmos rtc_core rtc_lib ext3 jbd mbcache sd_mod ata_piix ahci ata_generic pata_acpi libata scsi_mod
Apr 14 18:43:07 thinky kernel: Pid: 9512, comm: s2ram Tainted: P 2.6.29-ARCH #1
Apr 14 18:43:07 thinky kernel: Call Trace:
Apr 14 18:43:07 thinky kernel: [<c012f9d7>] warn_slowpath+0x87/0xe0
Apr 14 18:43:07 thinky kernel: [<c011ec25>] default_spin_lock_flags+0x5/0x10
Apr 14 18:43:07 thinky kernel: [<c01164d0>] lapic_next_event+0x10/0x20
Apr 14 18:43:07 thinky kernel: [<c01500e3>] clockevents_program_event+0xa3/0x170
Apr 14 18:43:07 thinky kernel: [<c0151312>] tick_dev_program_event+0x32/0xb0
Apr 14 18:43:07 thinky kernel: [<c0150447>] tick_notify+0x97/0x3c0
Apr 14 18:43:07 thinky kernel: [<c01491a6>] notifier_call_chain+0x36/0x70
Apr 14 18:43:07 thinky kernel: [<c0147ea1>] hres_timers_resume+0x41/0x50
Apr 14 18:43:07 thinky kernel: [<c014cc3a>] timekeeping_resume+0x11a/0x140
Apr 14 18:43:07 thinky kernel: [<c0299d91>] __sysdev_resume+0x11/0x50
Apr 14 18:43:07 thinky kernel: [<c0299e0f>] sysdev_resume+0x3f/0x70
Apr 14 18:43:07 thinky kernel: [<c015b410>] suspend_devices_and_enter+0x160/0x190
Apr 14 18:43:07 thinky kernel: [<c015bb7f>] freeze_processes+0x4f/0xa0
Apr 14 18:43:07 thinky kernel: [<c015b58a>] enter_state+0xfa/0x150
Apr 14 18:43:07 thinky kernel: [<c015b674>] state_store+0x94/0xd0
Apr 14 18:43:07 thinky kernel: [<c015b5e0>] state_store+0x0/0xd0
Apr 14 18:43:07 thinky kernel: [<c0224a74>] kobj_attr_store+0x24/0x30
Apr 14 18:43:07 thinky kernel: [<c01f3351>] sysfs_write_file+0xa1/0x100
Apr 14 18:43:07 thinky kernel: [<c01f32b0>] sysfs_write_file+0x0/0x100
Apr 14 18:43:07 thinky kernel: [<c01a8df0>] vfs_write+0xa0/0x160
Apr 14 18:43:07 thinky kernel: [<c01a8f81>] sys_write+0x41/0x80
Apr 14 18:43:07 thinky kernel: [<c0103ea3>] sysenter_do_call+0x12/0x2f
Apr 14 18:43:07 thinky kernel: ---[ end trace 2b9e3dc85bad025f ]---
Apr 14 18:43:07 thinky kernel: agpgart-intel 0000:00:00.0: restoring config space at offset 0x1 (was 0x900106, writing 0x20900106)
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x68000000)
Apr 14 18:43:07 thinky kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0)
Apr 14 18:43:07 thinky kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x1821)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x1841)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x1881)
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xa0040000)
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xac820000)
Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: restoring config space at offset 0x4 (was 0x0, writing 0xa0211000)
Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
Apr 14 18:43:07 thinky kernel: ath5k 0000:04:02.0: restoring config space at offset 0x3 (was 0x5008, writing 0xa808)
Apr 14 18:43:07 thinky kernel: ACPI: Waking up from system sleep state S3
Apr 14 18:43:07 thinky kernel: ACPI: EC: non-query interrupt received, switching to interrupt mode
Apr 14 18:43:07 thinky kernel: agpgart-intel 0000:00:00.0: restoring config space at offset 0x1 (was 0x900106, writing 0x20900106)
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: PME# disabled
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.1: PME# disabled
Apr 14 18:43:07 thinky kernel: pcieport-driver 0000:00:1c.0: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: usb usb2: root hub lost power or was reset
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: usb usb3: root hub lost power or was reset
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: usb usb4: root hub lost power or was reset
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: usb usb5: root hub lost power or was reset
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PME# disabled
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PME# disabled
Apr 14 18:43:07 thinky kernel: pci 0000:00:1e.0: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: ata_piix 0000:00:1f.2: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xac820000)
Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: PME# disabled
Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Apr 14 18:43:07 thinky kernel: ath5k 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
Apr 14 18:43:07 thinky kernel: serial 00:09: activated
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Starting disk
Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
Apr 14 18:43:07 thinky kernel: ata1.00: configured for UDMA/100
Apr 14 18:43:07 thinky kernel: ata1.00: configured for UDMA/100
Apr 14 18:43:07 thinky kernel: ata1: EH complete
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write Protect is off
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write Protect is off
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr 14 18:43:07 thinky kernel: usb 4-2: reset full speed USB device using uhci_hcd and address 2
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: power state changed by ACPI to D0
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: power state changed by ACPI to D0
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: setting latency timer to 64
Apr 14 18:43:07 thinky kernel: Restarting tasks ... done.
Apr 14 18:43:07 thinky acpid: client 9040[0:0] has disconnected
Apr 14 18:43:07 thinky logger: ACPI group/action undefined: processor / CPU
Apr 14 18:43:07 thinky acpid: client connected from 9040[0:0]
Apr 14 18:43:07 thinky acpid: 1 client rule loaded
Apr 14 18:43:08 thinky dhcpcd[7651]: wlan0: carrier lost
Apr 14 18:43:08 thinky kernel: wlan0: deauthenticating by local choice (reason=14)
Apr 14 18:43:08 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 1
Apr 14 18:43:09 thinky kernel: ath5k phy0: noise floor calibration timeout (2452MHz)
Apr 14 18:43:13 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 1
Apr 14 18:43:13 thinky kernel: wlan0 direct probe responded
Apr 14 18:43:13 thinky kernel: wlan0: authenticate with AP 00:12:bf:a2:a5:5b
Apr 14 18:43:13 thinky kernel: wlan0: authenticated
Apr 14 18:43:13 thinky kernel: wlan0: associate with AP 00:12:bf:a2:a5:5b
Apr 14 18:43:13 thinky kernel: wlan0: deauthenticated (Reason: 1)
Apr 14 18:43:14 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 2
Apr 14 18:43:14 thinky kernel: wlan0 direct probe responded
Apr 14 18:43:14 thinky kernel: wlan0: authenticate with AP 00:12:bf:a2:a5:5b
Apr 14 18:43:14 thinky kernel: wlan0: authenticated
Apr 14 18:43:14 thinky kernel: wlan0: associate with AP 00:12:bf:a2:a5:5b
Apr 14 18:43:14 thinky kernel: wlan0: deauthenticated (Reason: 1)
Apr 14 18:43:15 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 3
Apr 14 18:43:15 thinky kernel: wlan0 direct probe responded
Apr 14 18:43:15 thinky kernel: wlan0: authenticate with AP 00:12:bf:a2:a5:5b
Apr 14 18:43:15 thinky kernel: wlan0: authenticated
Apr 14 18:43:15 thinky kernel: wlan0: associate with AP 00:12:bf:a2:a5:5b
Apr 14 18:43:15 thinky kernel: wlan0: deauthenticated (Reason: 1)
Apr 14 18:43:16 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b timed out
Apr 14 18:43:19 thinky logger: ACPI group/action undefined: ibm/hotkey / HKEY
Apr 14 18:43:19 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
Apr 14 19:27:27 thinky syslog-ng[5106]: syslog-ng starting up; version='3.0.1'
Apr 14 19:27:27 thinky kernel: Linux version 2.6.29-ARCH (root@T-POWA-LX) (gcc version 4.3.3 (GCC) ) #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009
Apr 14 19:27:27 thinky kernel: KERNEL supported cpus:
Apr 14 19:27:27 thinky kernel: Intel GenuineIntel
Maybe you are looking for
-
Adobe Premiere Pro CC 2014.1 won't open and crashes
Hi all, I'm pretty desperate because I need to work on a project by my colleague (who works with Premiere, latest version)... but I just can't make my version even open. As soon as it starts firing up, it crashes. I used to have a working version (7.
-
Connecting Color Correction Monitor To My G5 (Help Please)
Hello everyone. I'm getting ready to begin color correction on a DV feature I've just finished audio post on. I have a Macintosh dual 2Gig G5. It's an early G5 that has PC133 slots, however, and is NOT HD compatible or ready. I cannot use an HD video
-
SYS PACKAGE DBMS_DEFER_IMPORT_INTERNAL NOT ACCESSIBLE
We are trying to import a dmp file to Oracle 10.2.0.1 database. This is a full import and ignore=y has been given. We found the following error for one particular user ORA-06550: line 2, column 5: PLS-00302: component 'DBMS_DEFER_IMPORT_INTERNAL' mus
-
IBM Thinkpad Monitor goes blank after a few miniutes
Hi, I have aT43p with an ATI Mobility FireGL V3200 running XP Sp2. For the past couple of weeks the screen goes blank (Black) after several minutes. I can use the Fn-F7 to toggle the monitor between LCD and external monitor (which is not attached) an
-
Problems with event handling in JmenuItem
Hello: I'm trying to handle an event for a menuItem and tool bar item: with this code: newBallotAction = new AbstractAction("newBallot") public void actionPerformed(ActionEvent e) try{ System.out.println("MainWindow newBallotAction"); Ballot ballot =