FAGL_FC_VAL error.

Hi
When I am doing my FAGL_FC_VAL transcation, in the out put screen there are 2 fields Exch. Rat and Exch Rate.
But the my problem is in Exch Rat its picking up some old rate 44.17 for EURO and I am not abel to find out from where its picking up.
Regards
GD

Hey...
Just follow the last step.
Follow my first response and path i have written - Periodic processing - Valuation method - Click on Valuation method which you are using for FAGL_FC_VAL
The below are the details you will see. Notice the last 3 lines. This is your problem. Findout here the Exc. rate tyep and go to OB08.
Find the latest exchange rate.
Valuation method     EVR
Description          Always valuate
Document Type            FC
ExchRate Type for Debit Bal SPOT
ExchRate Type for CreditBal SPOT       Minimum difference
E/R Type for Translatn      SPOT

Similar Messages

Valuating Foreign Currency, Err Msg:Required Currency Type 11 Not in Ledger

Dear Experts/Moderator,
When valuating Foreign Currency using FAGL_FC_VAL, error message displayed "Required Currency Type 11 Not in Ledger". Can any one explain the reason for the error and provide solution.
Thanks
Chandra

HI,
did you make a SAPNET search? See SAPNET Note 1115199 for details.
BR Christian

Error while running foreign currency valuation program FAGL_FC_VAL

Hi
this is regarding foreign currency valuation in ECC6.0 with EHP4
i have done the revevent setting in spro and while execturing TC FAGL_FC_VAL agetting following error:-
Incorrect account determination: 1000 10 200010
Message no. FR257
in customization, i have assigned P&L and balance sheet account against above GL (OBA1 -> KDF).
any idea where i am wrong. Please reply.
regards
DD

Hello Devi,
This account managing with open item? Can you check G/L account master data?
If yes,
You should check your customizing OBA1 -> KDF. I think you filled currency and currency type on OBA1-KDF. If you don't have different P&L ve balance sheet adjustment account for each currency and currency type, you can pass initial for this field. ıf you use different balance sheet adj. account or P&L account for each item, you must assign write criteria.
For example your company code currency is USD and you have a customer reconcilation account which has EUR currency, you should assign EUR currency for this account on OBA1-KDF. Please check in FS00 for this account, exchange rate difference key must be empty if this account managing with open item.
Regards,
Burak

Error found at the time of posting of t code : FAGL_FC_VAL

Hi guru,
At the time of posting through said T code,the following errors are coming:
Document no: ERROR 15
Doc Error 015 does not exist in co code 1000 or has been archived.
Due to that error i am unable to post it .
Pl advise.
Regards,
Samar

Hi Gurus,
Kindly advise.
Regards,
Samar

FAGL_FC_VAL is giving DUMP ERROR

Hello Friends,
When i execute FCV for G/L Balances, system is giving dump error which i mentioned below.
Runtime Errors         RAISE_EXCEPTION
Date and Time          16.01.2010 18:31:11
Short text
     Exception condition "CURRENCY_EMPTY" raised.
What happened?
     The current ABAP/4 program encountered an unexpected
     situation.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     A RAISE statement in the program "SAPLGICV" raised the exception
     condition "CURRENCY_EMPTY".
     Since the exception was not intercepted by a superior
     program, processing was terminated.
     Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"RAISE_EXCEPTION" " "
"SAPLGICV" or "LGICVU02"
"G_CURRENCY_FROM_CT_GET"
or
"SAPLGICV" "CURRENCY_EMPTY"
or
"FAGL_FC_VALUATION " "CURRENCY_EMPTY"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
    To save the description, choose "System->List->Save->Local File
(Unconverted)".
As per this dump i've searched SAP Notes in OSS. Unfortunately i couldn't find anything.
But i'm not getting this error when execute FCV for Open Items.
What could be the solution?
Please guide me.
Rgds
Swapna

Hi Anuj,
Thanks for your response.
Actually no need to maintain currency in the main screen.
This is the problem with non-maintenance of currency for a company code. It will be fixed once we maintain the currency for that Company code.
Bye
Swapna

Exchange Gain Loss Revaluation - Error Message No. F5429

Hi,
While peforming the foreign currency revaluation of open items as at 31.12.2007, using the T Code FAGL_FC_VAL, the system calculates the Exchange Rate difference but the documents do not get posted. The Document display shows an error -
Document ERROR 172 does not exist in company code 1000 or has been archived
Message no. F5429
Could anyone advise as to how this could be resolved and what could be the reason for such kind of error.
Thanks in advance.
Rgds.

Raj,
Your question is a little confusing, Does it say " Unable to post the document" while you are trying to run the FCV for Open items.
Or is it like the document that got posted during FCV cannot be viewed by you ?
-Nandita

Incorrect Account Determination Error in Foreign Currency Revaluation

Hi All,
I am executing T-Code FAGL_FC_VAL for foreign currency Valuation with new GL. I am getting an error message
"Incorrect account determination: 1000 01 205000"
Please let me know how to resolve this error. I have maintained the GL Accounts in OB09.
Thanks!
Regards,
Vivek Srivastava

Hi
Please check the document splitting rule defined for this GL account for item category.
Regards,
Lakshmanan Krishnan

Exchange rate differences posted when clearing but not FAGL_FC_VAL

Hello,
I need to configure accounts for exchange rate differences for clearing, but I if I configure just "account for Realized Exchange Rate Losses" and not " Account for Loss from Valuationu201D in OBA1, the account is selected in month end valuation ( FAGL_FC_VAL) and I do not want it because it ends on error.
Do you know how to cover this requirement?
Cheers

Hi,
You can exclude the account in the the forex reval run by excluding the GL account by specifiying the account in the variant used for period end processing.
Or you can use valuation area for period end processing in FAGL_FC_VAL and configure based on which the account if not maintained in the valuation area would not post.
Regards
K.R

Account Determinitation Error

When we are running the Foreign currency valuation
when iam running FAGL_FC_VAL
Incorrect account determination: company code 1000 Vendor reconciliation account 1002011
Message no. FR257
also when i do the posting GL 40 and 50 not assigning
Plz help me out
thank a million in advance

I have Checked the OBA1 Tcode . in KDF i have assigned Vendor reconciliation account and forex loss and gain GL
still iam getting the same error message
@5C\QError@ Incorrect account determination: 1000 V 1002011
Problem class important 1 FR257
Plz suggest me the forex loss and gain and reconciliation a/c gl status .when i run fcv why automatic posing not happen in forex gl

Currency valuation error

Hi,
We have company code:0001 and g/l code: 60000 is maintained for relevant config for foreign currency valuation for the t code: OB09 and assigned this g/l code to FSV also.
we have executed for the t code: fagl_fc_val for the relevent g/l code: 60000 and it is picked for the document numbers accordingly, so that we have executed batch input session with the reference of company code and g/l code number with valuation area level. and session is also created, when we processed batch input session it is showing instead 60000 to <60000>. with g/l code description wrongly and this error is getting for this valuation area level only.
Could you please advice how to resolve this one.
Reg
Sang

Hi Sangeetha,
Have you selected create postings check box while executing fagl_fc_val ?
Regards,
Kesav

Error: country se does not store a hard currency

Reg: country SE does not store a hard currency
Hi
The Above error messages is displayed when i am trying to do foreign currency revaluation setting under TCODE - FAGL_FC_VAL And my co code country is IN but the error message shows for country SE, can any one please give me a solution for the above
Thank you
Charan

Check the following notes:-
Note 81319 - SAPFGVTR: GI806 error in currency translation
Note 135956 - FI-SL: Error GI806 or GI807
thanks
G. Lakshmipathi

Fagl_val error

we would like to know the difference between fagl_fc_val and fagl_fc_trans? which one should run first, under which situation, we need to run fagl_fc_trans?
we encounter an error during fagl_fc_val, it says:
Incorrect account determination: 2230 0L 22700000
Message no. FR257
so how to resolve error

Hi Siva,
The program fagl_fc_val valuates the open items posted in first local currency, whereas the program fagl_fc_trans valuates for additional currencies (2nd or 3rd Local currency). It is not mandatory to execute the second program and is required to be executed only if you have additional currencies customised.
For the error check the configuration in OBA1 for transaction KDF or transaction OB09.
Regards
Pooja

Error in starting Adobe Bridge in Photoshop CS2

I've just installed Photoshop CS2, however upon opening Adobe Bridge this error message appears " The application has failed to start because libagluc28.dll was not found. Reinstalling to application may fix the problem"
I have reinstalled and click repair but to no avail
I followed Adobe Support Knowledgebase solution and run CMD and this appears:
c:Documents and Settings/Jesus M Ferraris>
then i entered the command
cacls c:\windows\installer /T /E /C /G administrators:F
but an error message appears - 'cacls' is not recognized as an internal or external command, operable program or bathc file
I also entered the next command
cacls "c:\documents and setting\all users" /Y /E /C /G administrators:F
still the same error as above appears, Please help, have I miss something or was my procedure correct...
P4, 512ram, WXP 80gHD

Very useful.
Good Luck.
My
Si
tes

Windows Vista: Ipod Error Message, no longer read by PCs

Hello,
I have a 5th generation black ipod video with 30GB of memory.
The other day I hooked it up to my laptop (Toshiba, 4 months old) that it's been functioning on with no problems whatsoever. This weird error message flashed twice about it not being able to sync because of some software problem.
Eversince then, the only thing I can charge my ipod on is the family treadmill in the basement (~_~) as no other computer in the house recognizes it. I can't even charge it through the wall sockets, either.
I have changed the ipod cord, still no luck. I've also reset the device about 3 or 4 times and uninstalled, restarted the laptop then reinstalled itunes. I would like to reset it back to factory settings but that's impossible as computers/laptops don't pick it up. I live very far from a Mac store...
What's a girl to do? I can't live without my Busta Rhymes and Wu-Tang Clan!
Any advice would be greatly appreciated! Thanks!

you have to update Vista go to this site and up-date http://windowsupdate.microsoft.com

Error while offsetting a variable

Hello Experts
I want to display the data for last 5 years in my query. So I tried using the SAP exit variable Current Calendar Year (0CYEAR) and the offset it by 5. However, I am getting the following error message for the query "System error in program SAPLRR12 and form REP_ASSIGN_INITIAL_OPT-01"
Any Help on this is appreciated and points will be assigned.
Thanks

Thanks Chetan for your prompt reply. I have assigned points.
But I would appreciate if you help me clear my understanding of offseting a variable.
Say if the Current Calendar Year variable returns 2008, then will offseting that variable by 5 return me the data for years 2008, 2007, 2006, 2005 , 2004. Or, will it just return me the data for 2008 - 5 = 2004 only.
Thanks
Rishi

FAGL_FC_VAL error.

Similar Messages

Maybe you are looking for