FAGLFLEXT Table not getting updated
Hello All,
I have activated 0L leading ledger and the document splitting is up and active, however while posting a document, the FAGLFLEXT Table is not getting updated.
Can anybody please help.
Regards,
Vikram
Hello Vikram,
Did you assigned any scenarios to ledger.There are six scenarios like profit center update,prep for consolidation and all....so if you assign these scenarios then the FAGLFLEXT will be updated...
pls let us know if you already assigned and then we need to look in to it...
Thanks,
Sai.
Similar Messages
-
Custom field in BP_PDBGP table not getting updated
Hi,
i am working in Contract management in SRM 7.0 Pack 6. I have aadded a custom field in partner table which appears in the partner table of contract header. It is a checkbox. when i check it the value gets saved in BBPPDBGP table for the first time after that if i try to uncheck it the value is not getting updated. I checked in the BBP_DOC_CHANGE_BADI, the value which is getting passed is correct but it doesn't update the databse accordingly.
Any suggestions? is this a standard bug?
NehaHi Virendra,
Thanks a lot for your suggestion.
Where should i check? If the data passing to BBP_DOC_CHANGE_BADI is correct then that means at the webdynpro side there should not be any problem and as per the standard after doc_change also it should save properly. i also checked the badi there is not dependent coding done over there. DOC_SAVE badi is also inactive for contract business object. Hence, i am not getting any clue where could be the problem.
Let me know if you want more details inorder to analyse this problem.
Thanks &Regards,
Neha -
Error in Proxy- Table not getting updated
Hi,
This is an Interface between Oracle and SAP SRM. The Middleware used is
SAP XI.XI is fetching the data based on the SQL condition in the JDBC Adapter. The SAP XI JDBC Adapter picks up the
data with a poll interval of 600 seconds and do the required mapping
transformation in SAP XI and it gives XML to SAP SRM. The
receiver XI Adapter used is XI Adapter since there is a Inbound Proxy
program in the SRM system which when receives the XML from SAP X,
updates table . The data which is getting updated is of Bid
Invitation in SRM. I am able to see xml messages in SXMB_MONI in SRM system. But data is not getting updated in the tables.Any idea why this happening.
Thankshave you created the sales order through BDC .... or manually ....check first ...
if it is through BDC ...then error in the Program ...
if it is throught Manual check with function People in SD they would have defined in the Customisation upto 130 lines of Line item ...
orelse the patch should be applied ...
if you ask anydoubt in this message ....please mention your sap version which you are working ...
Girish -
BWFI_AEDAT table not getting updated - FI_GL_4 Delta
Hi Friends,
We have just started loading Delta loads using FI_GL_4.
The Changed records are getting updated correctly for all the documents into BWFI_AEDAT and loaded into BW except in cases of an Intercompany doc.
Is there a particular reason that changes to Intercompany Doc will not get updated in the table or is there a way to find out how this table gets populated so that I can debug this issue.
Any help is highly appreciated..
Ashish.Hi,
How many days after INIT are you going for delta??
If there is entry in BWFI_AEDAT there is no reason why delta should not come.
check for newly created documents in BKPF using CPUDT to see if new documents have been created in this period too.
Regards,
Saurabh -
GLPCA table not getting updated correctly for VBUND
Hi All,
I have come across one issue that the value of trading partner field (VBUND) in table GLPCA are not getting updated correctly for document type KP.
In vendor master this field has different value versus it is showing in GLPCA-VBUND.
Does any one knows about ?
Thanks for your help on it.
Regards,
ManojHi Sridhar,
Thanks for your response on it.
This note is not applicable for our system as we are working on 4.0B with support pack 52.
Also we are getting this worng update of this field (GLPCA-VBUND) while doing MR11 creating document with doc. type KP. This value is not picking from vendor master (LAF1-VBUND) and randamly picking any value. Not sure from where ?
Please advise your thought.
Thanks,
Manoj -
AUSP table not getting updated
Classification data of materials is not getting updated in the AUSP table. only few fileds are getting updated. Can you please guide me on this
AUSP table will update whenever you change characteristics option..
Suppose you are using classification for vendor..
Then whenever you will change characteristics value for vendor, the table will update..
Same as material master..
There are no field for material description in table AUSP.
Regards
Dev -
File to Proxy----Tables not getting updated.
Hi all,
I have File to proxy scnerio, where Data from file is uploaded in to BAPI in turn
updated in to tables.
If i take pay load from Moni and test in SPROXY then tables is getting updated.
But when i run Scnerio form XI tables are not getting updated.
Please help......Hi ,
Check this out if you missed any step.. This is exactly on your senario.
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
hope this will help you.
Regards
Aashish Sinha
PS : reward points if helpful -
C$sync_history table not getting updated
I am doing file based sync using the oracle APIs. While syncing there is no entry in the table showing Sync happened. but C$SYNC_LOG table is getting updated.
Can anybody tell whats the issue.
Thanks and Regards
Lijo LawranceSomething additionaly. If the removeSession throws exception, or does not work as expected, the only way to continue is to extend the HeliosSession Class, and add to history by yourself.
The code for extending the HeliosSession is listed above.
The only thing you need is to call
((HeliosSessionExtended)localHeliosSession).addToSyncHistory(this); //this is the FDSession, or the new one used in constrctor of HeliosSession, or in the createSession Method from syncService)
afert startSession completes successfully.
import java.sql.Connection;
import java.sql.PreparedStatement;
import java.sql.SQLException;
import java.sql.Timestamp;
import java.util.Iterator;
import java.util.LinkedList;
import oracle.lite.sync.HeliosSession;
import oracle.lite.sync.HeliosTransport;
import oracle.lite.sync.SiteDef;
import oracle.lite.sync.Subscription;
import oracle.lite.sync.SyncPubItemStatus;
public class HeliosSessionExtended extends HeliosSession {
public HeliosSessionExtended(HeliosTransport paramHeliosTransport) throws Throwable {
super(paramHeliosTransport);
//override the addToSyncHistory method
void addToSyncHistory(Connection paramConnection) {
//what I said about Sync_history
if (!SiteDef.SYNC_HISTORY) {
return;
Long SessionId = this.getSessionId();
Long DeviceSessionId = this.getDeviceSessionId();
String clientId = this.getClientId();
String memberId = this.getMemberId();
String devicePlatform = this.getDevicePlatform();
int result = this.getResult();
String localHeliosMessage = this.getMessage();
long startTime = this.getStartTimeMs();
long finishTime = this.getFinishTimeMs();
long uploadStartTime = this.getUploadStartTimeMs();
long uploadFinishTime = this.getUploadFinishTimeMs();
int recordCount = this.getUploadRecordCount();
long uploadedByteCount = this.getUploadByteCount();
long compressedByteCount = this.getUploadCompressedByteCount();
LinkedList uploadedPubItems = this.getUploadPubItems();
int uploadPubItemsSize = 0;
if (uploadedPubItems != null) {
uploadPubItemsSize = uploadedPubItems.size();
long downloadStartTime = this.getDownloadStartTimeMs();
long downloadFinishTime = this.getDownloadFinishTimeMs();
int downloadRecordTime = this.getDownloadRecordCount();
long downloadedByteCount = this.getDownloadByteCount();
long downloadedCompressedByteCount = this.getDownloadCompressedByteCount();
LinkedList downloadedPublicationItems = this.getDownloadPubItems();
int downloadPubItemsSize = 0;
if (downloadedPublicationItems != null) {
downloadPubItemsSize = downloadedPublicationItems.size();
int completeRefItemsCount = this.getCompleteRefreshItemCount();
PreparedStatement preparedStatement = null;
try {
String insertString = "INSERT INTO C$SYNC_HISTORY (SESSION_ID,CLIENT_ID,DEVICE_PLATFORM,RESULT,START_TIME,FINISH_TIME,UPLOAD_START_TIME,UPLOAD_FINISH_TIME,UPLOAD_RECORD_COUNT,UPLOAD_BYTE_COUNT,UPLOAD_COMPRESSED_BYTE_COUNT,DOWNLOAD_START_TIME,DOWNLOAD_FINISH_TIME,DOWNLOAD_RECORD_COUNT,DOWNLOAD_BYTE_COUNT,DOWNLOAD_COMPRESSED_BYTE_COUNT,COMPLETE_REFRESH_ITEM_COUNT,DEVICE_SESSION_ID,UPLOAD_PUB_ITEM_COUNT,DOWNLOAD_PUB_ITEM_COUNT,MEMBER_CLIENT_ID) VALUES (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)";
preparedStatement = paramConnection.prepareStatement(insertString);
preparedStatement.setLong(1, SessionId.longValue());
if ((clientId != null) && (clientId.length() > 0)) {
SetStringParameter(preparedStatement, 2, clientId);
} else {
SetStringParameter(preparedStatement, 2, " ");
if ((devicePlatform != null) && (devicePlatform.length() > 0)) {
SetStringParameter(preparedStatement, 3, devicePlatform);
} else {
SetStringParameter(preparedStatement, 3, " ");
if (result == 0) {
preparedStatement.setString(4, "SUCCESS");
} else if (result == 1) {
preparedStatement.setString(4, "FAILURE");
} else if (result == -1) {
preparedStatement.setString(4, "UNKNOWN");
} else {
preparedStatement.setNull(4, 12);
SetTimeParameter(preparedStatement, 5, startTime);
SetTimeParameter(preparedStatement, 6, finishTime);
SetTimeParameter(preparedStatement, 7, uploadStartTime);
SetTimeParameter(preparedStatement, 8, uploadFinishTime);
preparedStatement.setInt(9, recordCount);
preparedStatement.setLong(10, uploadedByteCount);
preparedStatement.setLong(11, compressedByteCount);
SetTimeParameter(preparedStatement, 12, downloadStartTime);
SetTimeParameter(preparedStatement, 13, downloadFinishTime);
preparedStatement.setInt(14, downloadRecordTime);
preparedStatement.setLong(15, downloadedByteCount);
preparedStatement.setLong(16, downloadedCompressedByteCount);
preparedStatement.setInt(17, completeRefItemsCount);
if (DeviceSessionId != null) {
preparedStatement.setLong(18, DeviceSessionId.longValue());
} else {
preparedStatement.setNull(18, 2);
preparedStatement.setInt(19, uploadPubItemsSize);
preparedStatement.setInt(20, downloadPubItemsSize);
if (memberId != null) {
preparedStatement.setString(21, memberId);
} else {
preparedStatement.setNull(21, 12);
preparedStatement.executeUpdate();
preparedStatement.close();
preparedStatement = null;
Object localObjcClob;
if (localHeliosMessage != null) {
localObjcClob = new Long[]{SessionId};
Subscription.setCLOB(paramConnection, "C$SYNC_HISTORY", "MESSAGE", localHeliosMessage, "SESSION_ID=? ", (Object[]) localObjcClob);
if (((uploadedPubItems != null) && (uploadedPubItems.size() > 0)) || ((downloadedPublicationItems != null) && (downloadedPublicationItems.size() > 0))) {
insertString = "INSERT INTO C$SYNC_HIS_PUB_ITEMS (SESSION_ID,PHASE,PUBLICATION,PUB_ITEM,DEVICE_TABLE,START_TIME,FINISH_TIME,IS_COMPLETE_REFRESH,RECORD_COUNT,BYTE_COUNT,COMPRESSED_BYTE_COUNT,MESSAGE) VALUES (?,?,?,?,?,?,?,?,?,?,?,?)";
preparedStatement = paramConnection.prepareStatement(insertString);
preparedStatement.setLong(1, SessionId.longValue());
SyncPubItemStatus localSyncPubItemStatus;
if ((uploadedPubItems != null) && (uploadedPubItems.size() > 0)) {
preparedStatement.setString(2, "UPLOAD");
localObjcClob = uploadedPubItems.iterator();
while (((Iterator) localObjcClob).hasNext()) {
localSyncPubItemStatus = (SyncPubItemStatus) ((Iterator) localObjcClob).next();
SetStringParameter(preparedStatement, 3, localSyncPubItemStatus.publication);
SetStringParameter(preparedStatement, 4, localSyncPubItemStatus.pubItem);
SetStringParameter(preparedStatement, 5, localSyncPubItemStatus.deviceTable);
SetTimeParameter(preparedStatement, 6, localSyncPubItemStatus.startTimeMs);
SetTimeParameter(preparedStatement, 7, localSyncPubItemStatus.finishTimeMs);
if (localSyncPubItemStatus.isCompleteRefresh) {
preparedStatement.setString(8, "YES");
} else {
preparedStatement.setString(8, "NO");
preparedStatement.setInt(9, localSyncPubItemStatus.recordCount);
preparedStatement.setLong(10, localSyncPubItemStatus.byteCount);
preparedStatement.setLong(11, localSyncPubItemStatus.compressedByteCount);
SetStringParameter(preparedStatement, 12, localSyncPubItemStatus.message);
preparedStatement.executeUpdate();
if ((downloadedPublicationItems != null) && (downloadedPublicationItems.size() > 0)) {
preparedStatement.setString(2, "DOWNLOAD");
localObjcClob = downloadedPublicationItems.iterator();
while (((Iterator) localObjcClob).hasNext()) {
localSyncPubItemStatus = (SyncPubItemStatus) ((Iterator) localObjcClob).next();
SetStringParameter(preparedStatement, 3, localSyncPubItemStatus.publication);
SetStringParameter(preparedStatement, 4, localSyncPubItemStatus.pubItem);
SetStringParameter(preparedStatement, 5, localSyncPubItemStatus.deviceTable);
SetTimeParameter(preparedStatement, 6, localSyncPubItemStatus.startTimeMs);
SetTimeParameter(preparedStatement, 7, localSyncPubItemStatus.finishTimeMs);
if (localSyncPubItemStatus.isCompleteRefresh) {
preparedStatement.setString(8, "YES");
} else {
preparedStatement.setString(8, "NO");
preparedStatement.setInt(9, localSyncPubItemStatus.recordCount);
preparedStatement.setLong(10, localSyncPubItemStatus.byteCount);
preparedStatement.setLong(11, localSyncPubItemStatus.compressedByteCount);
SetStringParameter(preparedStatement, 12, localSyncPubItemStatus.message);
preparedStatement.executeUpdate();
if (preparedStatement != null) {
preparedStatement.close();
preparedStatement = null;
} catch (Throwable localThrowable) {
//some error logging
} finally {
try {
if (preparedStatement != null) {
preparedStatement.close();
preparedStatement = null;
} catch (SQLException localSQLException2) {
//some sqlexception logging
void SetStringParameter(PreparedStatement paramPreparedStatement, int paramInt, String paramString)
throws SQLException {
if (paramString != null) {
paramPreparedStatement.setString(paramInt, paramString);
} else {
paramPreparedStatement.setNull(paramInt, 12);
void SetTimeParameter(PreparedStatement paramPreparedStatement, int paramInt, long paramLong)
throws SQLException {
if (paramLong > 0L) {
paramPreparedStatement.setTimestamp(paramInt, new Timestamp(paramLong));
} else {
paramPreparedStatement.setNull(paramInt, 93);
Edited by: FlorinA on Jul 6, 2010 12:37 AM
Edited by: FlorinA on Jul 6, 2010 12:45 AM -
Hi
I'm having a problem with updating an item which is not a database item.
I have about 8 fields , Items 1-7 belong to table A and item 8 belongs to table B
I have block level triggers like post-insert, pre-update and pre-delete to take care of the insert, update and delete which are all working fine.
Except when I update Item 8 ONLY , table B does not get updated and I get the message frm-40401 - No Changes To Save
I'm not able to figure out what else is needed. Pls help.
ThanxThere may be a better answer, but try setting the Lock Record property to Yes on the non-base-table item.
If that doesn't work, in the item's when-validate-item trigger, set one of the first seven items values to itself:
:Blk.Itm1 := :Blk.Itm1;
This will cause the record status to be CHANGED, so the record update will take place. -
UJE* tables not getting updated
Hello security experts,
We are currently on BI 7.4 version and have BPC 10 (CPM 801 SP 005) implemented, we are facing issues with the creation of New Teams and Member access profiles in the system.
Ideally when a new team/ Task or Member access profile gets created the respective UJE* tables must also get updated.
We created 3 new Teams and Member access profiles in the BPC front end, while checking the backend tables we found that not all UJE* tables are getting updated as expected.
Tables that got updated are :
UJE_MEMACCESS
UJE_TEAM_AGR
UJE_TEAM_MULTAGR
Tables that didnot get updated:
UJE_TEAM
UJE_PROFILE
UJE_PROFILE_ASIN
UJE_PROFILET
UJE_TEAMT
UJE_USER_TEAM ( we assigned users to the team via front end as well)
Ideally these tables must get updated for every new Team; Member access profile created. Am I missing some configuration which should update these tables?
Thanks & Regards
VeenaHi Veena,
I am also facing the same issue.
Please let me know if you could resolve the issue.
Thanks,
Manohar -
PAYR table not getting updated....
Dear all,
We have created one Z program for manual check creation. Z program automatically created manual checks in the system and its working fine.
In some cases system is not updated GL account in PAYR table for checks generated. In normal GL accounts also gets updated in PAYR table..
And this is happening only for few cases...
Please suggestHi,
Check the difference between full clearing / partial clearing OR the type of invoice cleared (like KR / RE).
VVR -
JCDS table not getting updated
Hi,
After creating a Service Order, I find Object Number OBJNR in Table JEST. But the same is not getting populated in Table JCDS. What could be the possible reasons ?
Thanks.
RajHello Manish,
I executed the said report and getting the following result:-
Repair: Status for PM/CS Orders
UPDATE MODE
Header
Operations
Components
No orders found with missing status information
END OF PROGRAM
What is the inference ? Have I missed out any config ?
Thanks.
Raj -
TVARVC table not getting updated properly
Hi,
We are facing a strange problem...
First job runs to update TVARVC variable to a new value...let say 6 to 7....
Second job which runs immediatly after first job uses this variable in TVARVC to read the value picks up old value instead of new value....i.e. its using 6 instead of 7.
Also TVARVC variable is Fully Buffered table...Can anyone tell me eventhough this variable is updated with new value, why second job is picking old value..??? also i dint see any COMMIT WORK after updating TVARVC in program...i doubt if buffered and no commit work causing the issue...any thoughts???
Expecting your help.
Thanks
HariHi Hari,
Is your update and the program that uses the update in the same LUW? You can create a function module, and run it "in update task". Then update your TVARV table, and run the other program from the function module.
This will put all the programs in the same LUW.
If for some reason your update to TVARV doesn't happen, and it abends, your other program will not be executed.
Just a thought,
Michelle -
EKPO table not getting updated with PR numbers
Hi All,
PR and PO is created in APO and then transferred to R/3 system. For all these POs, we can see the PR number in the PO display(ME23n) but when we see in the EKPO table the PR number is missing.
Any pointers as to why this is happenning? whether any SAP notes needs to be implemented?how we can make that PR is updated in EKPO table also?
Any feed abck will be highly appreciated.Hi,
The problem with having the EKPO hold the requisition number is that you then only have the ability to store ONE PR number.
By storing them on the delivery schedule lines you have the ability to have as many as you like and so you should be looking for these on the delivery schedule lines on the PO item and not on the item itself.
Steve B -
BW-CRM: SMOREPMA table not getting updated
Hi Gurus,
We have implemented BW-CRM link to display workbooks on Mobile clients.
I believe for every workbook 2 entries are added in SMOREPMA table, REPKIND = 'W' and one REPKIND = 'Q'.
In our case, we got 'W' record but the REPKIND = 'Q' record is not entered.
Out of ur experience can u pls tell me where the problem lies?have you created the sales order through BDC .... or manually ....check first ...
if it is through BDC ...then error in the Program ...
if it is throught Manual check with function People in SD they would have defined in the Customisation upto 130 lines of Line item ...
orelse the patch should be applied ...
if you ask anydoubt in this message ....please mention your sap version which you are working ...
Girish
Maybe you are looking for
-
My 'Set As Start Page' isn't working...does anyone know what I can do? Thank you!!
-
Full screen movie on video output
Hi. I don't know if someone has addressed this question already. But I sure as **** could not find it. I hooked up my Philips 32" digital widescreen flat TV to my iMac 20" via HDMI cable. Everything works fine, except i'm trying to project a movie on
-
How could we delete transport request and task(the released one)
Hello We have a released transport task(not request). Transport request is not released. How could we delete transport request and task(the released one). Namely we would not like to transport it to production
-
My phone cut off by itself and will not tun back on
the iphone cut off and will not cut back on or do anything. it is not receptive when i plug it into my computer either. Help please
-
Unable to start BPEL PM Server
All, I am getting the following exception when I try to start BPEL PM Server. Feb 2, 2007 3:40:44 PM com.evermind.server.XMLDataSourcesConfig parseRootNode INFO: Legacy datasource detected...attempting to convert to new syntax. 2007-02-02 15:40:50.29