FAGLL03 doesn't display functional areas
Dear All,
Whenever we run the FAGLL03- Display GL line item report, it's not displaying the functional area value for some line items (for some it displays), even though the original posted document shows the functional area value. I would appreciate if anyone provides solution for this issue.
Thanks in Advance........
Arun
Hi Arun,
Check if note 1151397 is applied. Then check point 52 of note 1070629.
The functional area is determined as in classic General Ledger
Accounting. That is, the functional area characteristic is not
determined until documents are saved.
By default, after activation of New General Ledger, the reports only
read the tables for New GL Accounting if the the indicator 'read
from Classical GL' is not set in table FAGL_ACTIVEC.
I hope this helps. I'm taking a guess here since I don't know your system.
Regards,
Lucas
Similar Messages
-
Financial statement version:functional area
Hi,
I created a financial statement version with functional area and run it(S_PL0_86000032 ) , most items are correct, however, the item which assigned function area always 0, this means that system can not get any data via function area. would anyone help me?
Rgds,
WubinHello
If you want to define a financial statement version with functional areas, these functions are limited. You cannot use the following functions:
Balance-Dependent Display
You cannot display functional areas dependent on the balance, that is, assign them to a different item dependent on the balance.
· Debit/Credit Shift
You cannot define items to which you have assigned functional areas as debit/credit shift items.
· Check for Completeness
You cannot use the check for completeness for financial statement versions with functional areas.
You also have to carry out the following additional activities:
1. When you enter the general data, set the Functional area permitted indicator.
You then have the option of assigning either accounts or functional areas to an item in your financial statement version.
2. Assign the required functional areas or functional area intervals to your P&L items
Before setting the indicator please go through this help link
http://help.sap.com/saphelp_erp2005vp/helpdata/en/b5/688b8ea30d11d39759006094b969cf/frameset.htm
regards -
My iPod and iPhone are not recognized in Windows 7 iTunes. I've reinstalled iTunes and restarted windows. Now iPod briefly displays, then device manager mass storage shows a yellow exclamation point. iPhone doesn't display in iTunes at all. Please advise
Try Andrei Cerbu's post here, JF Fourie's post here, or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update. See also TS1363: iPod: Appears in Windows but not in iTunes.
tt2 -
SAPUI5 Application doesn't display in Portal Content Area
Hallo Guys
We are developing a SAPUI5 application that needs to be displayed inside the portal.
The problem is that the SAPUI5 app doesn't display in in the content area, no erors, just a blank page, you have to set the iview to open in a seperate headerless window, then it works. But it needs to work in the content area.
Our findings: a possible cause is that the IE mode when inside the Portal content area is IE5 Quirks, and when it displays in a new window, the mode changes to a more recent and acceptable mode for SAPUI5, IE9.
Is there any solution to this? We get the same result with both URL iView and using the SAPUI5 iView in content provided by SAP. We are on NW 7.4
Regards
AntonetteHi Antonette,
As Lawrence explained the reason is indeed that quirks and standards mode can't run together on the same page (not only in portal but it's a limitation by MS).
Since your framework page is in IE5 quirks mode the UI5 application doesn't run in the content area, you can run it by selecting in the iView properties "Launch in a new headerless window (strandards)", that will open the UI5 application in a new window and will work.
If you wish to run UI5 applications in the content area you can get latest SP of 7.4 and there you will have a new framework page: standards AFP, basically an AFP framework page that works in standards mode.
In that framework page you can run UI5 applications in the content area, however trying to run old applications (HTMLB, not WD) may fail, for WD you have a paramater you need to pass called sap-ie, passing it with the value of "Edge" will make sure WD applications run in standards mode as well.
When running the AFP in standards mode you will need to open your HTMLB and other old applications in a new headerless window or new window so you can see the content.
Hope this helped,
BR,
Saar -
When logging into iCloud in Safari, Calendar doesn't display any events. They are displayed on the iPad, iPhone on even the iCal. What is wrong ?
:S,
Sorry, missed that fact. My memory is good, but short.
Try moving the "Calendar Cache" file to your Desktop. Quit iCal, and find the "Calendar Cache" file in your Macintosh HD/Users/yourusername/Library/Calendars. Move that file to your Desktop. After that, (I remember that I recommended this before), as long as you are moving files to the Desktop, repeat the plist removal procedure once again, log out/in or restart.
You should also consider removing the "To Do's" from Mail before restarting iCal. When you open iCal turn off "Show Birthdays calendar" in iCal>Preferences...>General.
Are you syncing any data? If so, what method(s) are you using?
;~) -
Functional Area in Line Item Display FBL3N
Dear Expert,
My system is running on ECC6.0 and functional area is activated.
I would like to see the Functional Area in Line Item Display (FBL3N) but couldn't get it in any field selection (change layout).
I have added the field in the GL Accounts> Line Items> Define Special Field for line item display as BSEG - FKBER_LONG
But I still couldn't get the functional area for each line item in the Line Item Display.
Please advise. Many thanks.Dear Please Configure Through Below Path, You will get Line item wise Functional Area:-
Financial Accounting (New)>Accounts Receivable and Accounts Payable>>Vendor Accounts>> Line Items >>Display Line Items> Define Special Field for line item display as BSEG - FKBER
Regards,
Viswa -
creative cloud installed and run but doesn't display apps or anything for that matters , only a black bar at the top with creative cloud written and a drop down menu of (help pin on notification area and quit ), creative cloud installed and run but doesn't display apps or anything for that matters , only a black bar at the top with creative cloud written and a drop down menu of (help pin on notification area and quit )
don't know if it's relevant or not , I run Windows 8 64-bit111994 please try utilizing the steps listed in App doesn’t open | Progress wheel spins continually to resolve the current error.
-
XMP doesn't display proper info in Photoshop CS2 for Mac.
Dear List members:
I have just recently installed Creative Suite CS2 and begun to explore the functionality of XMP. After purchasing Bruce Fraser's book on Camera Raw for CS2, I downloaded Metalab (Pound Hill Software) and created my first custom XMP panel that can be seen under the file info in Photoshop when an image (digital photo) is open.
The problem is that I noticed a few odd things and began to question myself if there is some kind of bug or a problem with my installation of CS2.
1. The window that opens under the file info command has several categories of information on the left to be chosen from, in the following order:
(1)Description, (2)Camera Data 1, (3)Camera Data 2, (4)Categories, (5)History, (6)IPTC Contact, (7)IPTC Content, (8)IPTC Image, (9)IPTC Status, (10)Adobe Stock Photos, (11)Origin, (12)Advanced
The Camera Data 1 option when selected opens a panel in the file info window that seems to contain all the information it is supposed to contain. The Camera Data 2 panel, on the other hand, doesn't display any information at all. Although the fields are there, they are empty. The fields are:
(1)Pixel Dimension X and Y, (2)Orientation, (3)Resolution X and Y, (4)Resolution Unit, (5)Compressed Bits per Pixel, (6)Color Space, (7)Light Source, (8)File Source.
All these fields are empty but when looking at the same file under Bridge the information is there, displayed under the metadata menu.
This is something I noticed "before" installing Metalab so I know it is not a compatibility issue generated by the installation of the software.
After installing CS2 I noticed that CS1 remained installed in my system. The version I purchased of CS2 is the upgrade one. Since I have no use for CS1 as I am now totally converted to CS2, I would like to uninstall CS1. The following are some of the questions I have:
1. How can I uninstall CS1 without causing any problems to my installation of CS1 ? Is there an uninstall utility with the software or will I have to uninstall the entire package manually ?
2. My G5 came with only one internal 160 GB drive where I originally installed CS1. I then purchased another internal 400 GB HD and copied the original drive onto it. This week I am going to replace the original 160 GB drive with a second 400 GB drive so that I can do regular "mirror image" back-ups between the two drives. Shold I expect any problems as I remove the drive where I originally installed CS1 ? Since I used disk utility to "copy" the 160 GB drive onto the 400 GB drive, my understanding it that any Adobe software key or authorization was also transferred to the drive. Is this right ? In case it hasn't, how can I transfer this information so that after I remove the 160 GB drive I will not experience any problems when trying to run CS2 ?
3. How can I fix the problem with the Camera Data 2 panel under the file info window and command ? I noticed that the folder that is supposed to hold the Custom File Info Panels (HD>Library>Application Support>Adobe>XMP>Custom File Info Panels) has files for CS1 and CS2. Could this be a problem ? There many more files with .dat extenson than there are with the .txt extension. Bruce Fraser specifically says that the ones with the .txt extension are the ones that hold the XMP templates for information related to the image files. The files I have in this folder with the .txt are:
(1)Camera1_CS2.txt , (2)Camera1.txt , (3)Camera2_CS2.txt , (4)Camera2.txt , (5)Categories.txt , (6)History.txt , (7)IPTC_Contact.txt , (8)IPTC_Content.txt , (9)IPTC_Image.txt , (10)IPTC_Status.txt , (11)StockPhotoInfo.txt
The only ones that have two separate files one each for CS1 ad CS2 are Camera 1 and Camera 2. Camera 2 seems to be the only that is now non-functional. What should I expect to happen if I were to manually uninstall the ones that relate to CS1 ? Could that cause any problems ?
My apologies for the long post but I didn't really know how to make it shorter.The Photoshop and/or Bridge forums would be more likely places to get answers to your questions. This forum is inhabited more by programmer types interested in implementing the XMP specification in applications we write.
I'd expect CS2 to ignore CS1 panels so I doubt that's the issue. Panels don't interfere with each other--they just offer different views of the data. In any case, move the extra panels to your desktop and see what happens.
As far as I know, all you need to do on the Mac is drag the CS1 application folder to the trash to uninstall it. -
Visual Calendar doesn't display in IE or Netscape
I have Dreamweaver's php visual calendar on my web page. It
displays fine in Firefox, but doesn't show at all in IE7 or
Netscape. I haven't uploaded the page to a server, just running it
on my computer. Does anyone know why it doesn't display in the NS
or IE?
Also, I'm not able to run the administrator functions as
outlined in Dreamweaver's info about the calendar. When I type in
c://my-site/TDE_Vcalendar/admin in the location bar, I get an index
listing of the folder, but no prompt to enter a user name and
password.lhutchinson wrote:
> I uploaded the files to our web server, and the calendar
displays perfectly now
> in IE7 and FF, but Netscape 7.2 just shows a blank
space. I looked through the
> NS preferences, but didn't see anything about php files.
Is there a setting in
> NS that I'm missing that will allow php files to run?
NS doesn't "run" PHP files, the server does, the server will
send HTML to the browser and the browser interprets it, including
pulling images, JavaScript and CSS files and executing any
JavaScript. If the calendar isn't showing up, then there is either
an issue with way the calendar is set up, or the calendar doesn't
support Netscape.
In your original post, you say that you have "Dreamweaver's
php visual calendar on my web page". There is no Dreamweaver php
visual calendar that comes with Dreamweaver. Are you perhaps using
an extension, if so, please state which one, and where you got it.
You have have to go to the developer's site for support.
Beyond that you'll need to post a link to your page and if
anyone using Netscape 7.2 may drop by. I've not used any version of
Netscape since Firefox came out, plus it is no longer developed,
and the version you're talking about is even 2 versions older than
the last one released. so do you really need to worry about it?
Danilo Celic
|
http://blog.extensioneering.com/
| WebAssist Extensioneer
| Adobe Community Expert -
IE doesn't display part of spry data set!?!?
Hi there,
I hope somebody can help me out with a problem I got with the spry dataset I use on my website. -> http://media-powerplant.de/media-powerplant-referenzen.html
The thing is that the IE doesn't display text in the "master" region. There are no problems with the Details region, and pictures are also diplayed in the master, but strangely enough no text! :-(
When i visit the site with firefox or any other browser the text gets displayed. I have no idea what the problem is, but this is really bothering me.
I hope that somebody is kind enough to help me out here. Big thanks in advance! :-)
Here is the HTML-code of the site: (the red highlighted lines are those which doesn't get diplayed)
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd
">
<html xmlns="http://www.w3.org/1999/xhtml" xmlns:spry="http://ns.adobe.com/spry
">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<meta name="description" content="Ihr Partner für Musik- und
Videoproduktionen, Webdesign, Internet, Flash, Podcasts und
Grafikdesign" />
<meta name="keywords" content="gemafreie musik,lizenzfrei,lizenzfreie
musik, royalty free, filmmusik,hintergrundmusik, werbespot,trailer,
jingles, loops, Werbemusik, Mastering, Scoremusik,
Filmproduktion
,Videoproduktion,Computeranimation,Postproduktion,Filmagentur,3D
Visualisierung,3D Animation,Filme,Video,Film Produktion,Grafik
Design,Imagefilm,Werbefilm,Werbefilme,Werbefilmproduktion, Webdesign,
Webspace ,Webhosting, Web-Design , Web, Domainregistrierung,
Internetdesign, Internet, Provider, HTML, Web-Space, Design, Webdesign
München, Grafikdesign, kreative, innovative, Homepage,
Suchmaschinenoptimierung, Michael Peh, Michi Peh, Matthias Damoser,
media powerplant, media-powerplant, München"/>
<title>media powerplant *** Musikproduktion / Videoproduktion /
Webdesign ***</title>
<meta name="author" content="[email protected]">
<meta name="copyright" content="Webdesign: Matthias Damoser / media
powerplant">
<meta name="Content-Language" content="de">
<meta name="robots" content="INDEX,FOLLOW">
<meta name="revisit-after" content="7 days">
<link rel="SHORTCUT ICON" href="http://www.media-powerplant.de/favicon.ico
">
<link href="mppLayout.css" rel="stylesheet" type="text/css" />
<!--[if IE]>
<style type="text/css">@import url(ie.css);</style>
<![endif]-->
<script src="SpryAssets/xpath.js" type="text/javascript"></script>
<script src="SpryAssets/SpryData.js" type="text/javascript"></script>
<script type="text/javascript">
<!--
var dsreferenzen = new Spry.Data.XMLDataSet("referenzen.xml",
"referenz/beispiel");
dsreferenzen.setColumnType("name", "html");
dsreferenzen.setColumnType("MP3", "html");
dsreferenzen.setColumnType("theURL", "html");
dsreferenzen.setColumnType("theURL2", "html");
function MM_preloadImages() { //v3.0
var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array();
var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0;
i<a.length; i++)
if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j+
+].src=a[i];}}
function MM_goToURL() { //v3.0
var i, args=MM_goToURL.arguments; document.MM_returnValue = false;
for (i=0; i<(args.length-1); i+=2) eval(args[i]+".location='"+args[i
+1]+"'");
var dslinks = new Spry.Data.XMLDataSet("referenzenlinks.xml",
"referenz/link");
dslinks.setColumnType("a", "html");
//-->
</script>
<link href="SpryAssets/SpryMasterDetail.css" rel="stylesheet"
type="text/css">
</head>
<body>
<div id="hauptfenster">
<div id="content">
<div id="mitte">
<div id="header">
<h1>media powerplant</h1>
</div>
<div id="mainnavi">
<div class="menuHome" onclick=MM_goToURL('parent','media-
powerplant-home.html');return document.MM_returnValue
document.MM_returnValue></div>
<div class="menuMusik" onclick=MM_goToURL('parent','media-
powerplant-musikproduktion.html');return document.MM_returnValue></div>
<div class="menuVideo" onclick="MM_goToURL('parent','media-
powerplant-videoproduktion.html');return document.MM_returnValue"></div>
<div class="menuWeb" onclick=MM_goToURL('parent','media-
powerplant-webdesign.html') document.MM_returnValue></div>
<div class="menuReferenzen" onclick="MM_goToURL('parent','media-
powerplant-referenzen.html');return document.MM_returnValue"></div>
<div class="menuAbout" onclick=MM_goToURL('parent','media-
powerplant-about.html') document.MM_returnValue></div>
<div class="menuKontakt" onclick="MM_goToURL('parent','media-
powerplant-kontakt.html');return document.MM_returnValue"></div>
<div class="menuImpressum" onclick="MM_goToURL('parent','media-
powerplant-impressum.html');return document.MM_returnValue"></div>
</div>
<div id="inhalt">
<h2><span class="mpp">media powerplant</span> <span
class="bereich">Referenzen</span></h2>
<h2 class="unterüberschrift">Hier finden Sie einen Überblick
und einige interessante Details über unsere letzten Projekte</h2>
<p> </p>
<div id="musikproduktion">
<div id="musikprojekte">
<div id="projektescroll">
<div spry:region="dsreferenzen">
<table id="referenzTable">
<tr spry:repeat="dsreferenzen"
spry:hover="rowHoverRef" spry:select="rowSelectRef"
spry:setrow="dsreferenzen">
<td><img src="{screenshot}" alt="{name}"
width="140" height="93" class="screenshot"></td>
<td><span class="kategorie">{kategorie}</span><br>
<span class="name">{name}</span></td>
</tr>
</table>
</div>
</div>
</div>
<div spry:detailregion="dsreferenzen">
<div id="musikmainRef">
<h2> </h2>
<p> </p>
<div id="projektbeschreibung">
<p class="beschreibung">{beschreibung}</p>
<p class="aufgabenfeld">{dsreferenzen::aufgabenfeld}</p>
<p class="aufgabenbilder">
<img src="{bild1}" width="90" height="77"
class="bild"><img src="{bild2}" width="90" height="77"
class="bild"><img src="{bild3}" width="90" height="77"
class="bild"><img src="{bild4}" width="90" height="77" class="bild"> </
p>
<p class="linkMP3">{MP3}</p>
<p class="reflink">{theURL}</p>
<p class="reflink">{theURL2}</p>
</div>
</div>
</div>
</div>
<div class="copyrightref">Copyright © 2009 media powerplant |
Alle Rechte vorbehalten | <a href="media-powerplant-
impressum.html">Impressum</a> | <a href="media-powerplant-
kontakt.html">Kontakt</a> | </div>
</div>
</div>
</div>
</div>
</body>
</html>
the XML looks like this: (again highlighting the problematic regions)
<?xml version="1.0" encoding="UTF-8"?>
<referenz>
<beispiel>
<screenshot>Bilder/Projektbilder/impulstv.jpg</screenshot>
<name>Sounddesign ImpulsTV</name>
<kategorie>Musikproduktion</kategorie>
<beschreibung>Produktion des Musikstückes "Today" für Imagefilm
der Firma ImpulsTV</beschreibung>
<aufgabenfeld>Aufgabenbereich: * Musikkomposition *
Musikproduktion</aufgabenfeld>
<bild1>Bilder/Projektbilder/mics.jpg</bild1>
<bild2>Bilder/Projektbilder/misch2.jpg</bild2>
<bild3>Bilder/Projektbilder/keyboard.jpg</bild3>
<bild4>Bilder/Projektbilder/headphones.jpg</bild4>
<MP3>
<![CDATA[
<embed src="Songs/Referenzen/Today.mp3" autostart="false"
loop="false" width="300" height="18" controller="true" id="rock.mp3"
name="bg song" pluginspage= "http://www.apple.com/quicktime/
download/"> </embed>
]]>
</MP3>
</beispiel>
<beispiel>
<screenshot>Bilder/Projektbilder/gm.jpg</screenshot>
<name>Webdesign gin-mum.com</name>
<kategorie>Webdesign</kategorie>
<beschreibung>Design, Programmierung und Webspace-Hosting der
Internetpräsenz für die Münchner Band gin mum.</beschreibung>
<aufgabenfeld>Aufgabenbereich: * Webdesign * Hosting und Domain *
Programmierung</aufgabenfeld>
<bild1>Bilder/Projektbilder/gm_1.jpg</bild1>
<bild2>Bilder/Projektbilder/gm_2.jpg</bild2>
<bild3>Bilder/Projektbilder/gm_3.jpg</bild3>
<bild4>Bilder/Projektbilder/gm_4.jpg</bild4>
<theURL>
<![CDATA[
<p>
<a target="_blank" href="http://www.gin-mum.com">www.gin-mum.com</a>
</p>
]]>
</theURL>
</beispiel>
<beispiel>
<screenshot>Bilder/Projektbilder/hz.jpg</screenshot>
<name>Imagefilm für Johanna Schäfer</name>
<kategorie>Videoprodution</kategorie>
<beschreibung>Videoediting für Johanna Schäfer</beschreibung>
<aufgabenfeld>Aufgabenbereich: * Videoediting</aufgabenfeld>
<bild1>Bilder/Projektbilder/hz_1.jpg</bild1>
<bild2>Bilder/Projektbilder/hz_2.jpg</bild2>
<bild3>Bilder/Projektbilder/hz_3.jpg</bild3>
<bild4>Bilder/Projektbilder/hz_4.jpg</bild4>
</beispiel>
<beispiel>
<screenshot>Bilder/Projektbilder/SRB.jpg</screenshot>
<name>Sounddesign Radio SRB</name>
<kategorie>Musikproduktion</kategorie>
<beschreibung>Media powerplant produzierte das gesamte
Sounddesign für den regionalen Radiosender SRB. Dabei wurden
hauptsächlich Musikbetten und Radiojingles produziert.</beschreibung>
<aufgabenfeld>Aufgabenbereich: * Sounddesign * Musikkomposition *
Musikproduktion</aufgabenfeld>
<bild1>Bilder/Projektbilder/waves.jpg</bild1>
<bild2>Bilder/Projektbilder/peakmeter.jpg</bild2>
<bild3>Bilder/Projektbilder/mixpult.jpg</bild3>
<bild4>Bilder/Projektbilder/mics.jpg</bild4>
<MP3>
<![CDATA[
<embed src="Songs/Electro/Hintergrund_3.mp3" autostart="false"
loop="false" width="300" height="18" controller="true" id="rock.mp3"
name="bg song" pluginspage= "http://www.apple.com/quicktime/
download/"> </embed>
]]>
</MP3>
</beispiel>
<beispiel>
<screenshot>Bilder/Projektbilder/Logo_earthTV.jpg</screenshot>
<name>EarthTV Musik</name>
<kategorie>Musikproduktion</kategorie>
<beschreibung>Komposition und Produktion des Stückes "Steil" im
Auftrag von EarthTV für deren Sendeformat bei Sevenload.</beschreibung>
<aufgabenfeld>Aufgabenbereich:* Musikkompostion *
Musikproduktion</aufgabenfeld>
<bild1>Bilder/Projektbilder/peakmeter.jpg</bild1>
<bild2>Bilder/Projektbilder/headphones.jpg</bild2>
<bild3>Bilder/Projektbilder/keyboard.jpg</bild3>
<bild4>Bilder/Projektbilder/mic.jpg</bild4>
<theURL>
<![CDATA[
<p>
<a target="_blank" href="http://de.sevenload.com/sendungen/
earthTV">EarthTV bei www.Sevenload.de</a>
</p>
]]>
</theURL>
<MP3>
<![CDATA[
<embed src="Songs/Electro/Steil.mp3" autostart="false" loop="false"
width="300" height="18" controller="true" id="rock.mp3" name="bg song"
pluginspage= "http://www.apple.com/quicktime/download/"> </embed>
]]>
</MP3>
</beispiel>
</referenz>
Are you still with me? :-)
Attached you'll find what it looks like with Firefox and with InternetExplorer.Hmm, stil not working. But thanks for your support!
Here is the modified XML-code: (the not shown elements are highlighted)
<?xml version="1.0" encoding="UTF-8"?>
<referenz>
<beispiel>
<screenshot>Bilder/Projektbilder/impulstv.jpg</screenshot>
<name><![CDATA[Sounddesign ImpulsTV]]></name>
<kategorie><![CDATA[Musikproduktion]]></kategorie>
<beschreibung><![CDATA[Produktion des Musikstückes "Today" für Imagefilm der Firma ImpulsTV]]></beschreibung>
<aufgabenfeld>Aufgabenbereich: * Musikkomposition * Musikproduktion</aufgabenfeld>
<bild1>Bilder/Projektbilder/mics.jpg</bild1>
<bild2>Bilder/Projektbilder/misch2.jpg</bild2>
<bild3>Bilder/Projektbilder/keyboard.jpg</bild3>
<bild4>Bilder/Projektbilder/headphones.jpg</bild4>
<MP3>
<![CDATA[
<embed src="Songs/Referenzen/Today.mp3" autostart="false" loop="false" width="300" height="18" controller="true" id="rock.mp3" name="bg song" pluginspage= "http://www.apple.com/quicktime/download/"> </embed>
]]>
</MP3>
</beispiel>
<beispiel>
<screenshot>Bilder/Projektbilder/gm.jpg</screenshot>
<name><![CDATA[Webdesign gin-mum.com]]></name>
<kategorie><![CDATA[Webdesign]]></kategorie>
<beschreibung><![CDATA[Design, Programmierung und Webspace-Hosting der Internetpräsenz für die Münchner Band gin mum.]]></beschreibung>
<aufgabenfeld>Aufgabenbereich: * Webdesign * Hosting und Domain * Programmierung</aufgabenfeld>
<bild1>Bilder/Projektbilder/gm_1.jpg</bild1>
<bild2>Bilder/Projektbilder/gm_2.jpg</bild2>
<bild3>Bilder/Projektbilder/gm_3.jpg</bild3>
<bild4>Bilder/Projektbilder/gm_4.jpg</bild4>
<theURL>
<![CDATA[
<p>
<a target="_blank" href="http://www.gin-mum.com">www.gin-mum.com</a>
</p>
]]>
</theURL>
</beispiel>
<beispiel>
<screenshot>Bilder/Projektbilder/hz.jpg</screenshot>
<name><![CDATA[Imagefilm für Johanna Schäfer]]></name>
<kategorie><![CDATA[Videoprodution]]></kategorie>
<beschreibung><![CDATA[Videoediting für Mediengestalterin und Fotografin Johanna Schäfer.]]></beschreibung>
<aufgabenfeld>Aufgabenbereich: * Videoediting</aufgabenfeld>
<bild1>Bilder/Projektbilder/hz_1.jpg</bild1>
<bild2>Bilder/Projektbilder/hz_2.jpg</bild2>
<bild3>Bilder/Projektbilder/hz_3.jpg</bild3>
<bild4>Bilder/Projektbilder/hz_4.jpg</bild4>
<theURL>
<![CDATA[
<p>
<a target="_blank" href="http://hanna-schaefer.de/">Website von Johanna Schäfer</a>
</p>
]]>
</theURL>
</beispiel>
<beispiel>
<screenshot>Bilder/Projektbilder/SRB.jpg</screenshot>
<name><![CDATA[Sounddesign Radio SRB]]></name>
<kategorie><![CDATA[Musikproduktion]]></kategorie>
<beschreibung><![CDATA[Media powerplant produzierte das gesamte Sounddesign für den regionalen Radiosender SRB. Dabei wurden hauptsächlich Musikbetten und Radiojingles produziert.]]></beschreibung>
<aufgabenfeld>Aufgabenbereich: * Sounddesign * Musikkomposition * Musikproduktion</aufgabenfeld>
<bild1>Bilder/Projektbilder/waves.jpg</bild1>
<bild2>Bilder/Projektbilder/peakmeter.jpg</bild2>
<bild3>Bilder/Projektbilder/mixpult.jpg</bild3>
<bild4>Bilder/Projektbilder/mics.jpg</bild4>
<MP3>
<![CDATA[
<embed src="Songs/Electro/Hintergrund_3.mp3" autostart="false" loop="false" width="300" height="18" controller="true" id="rock.mp3" name="bg song" pluginspage= "http://www.apple.com/quicktime/download/"> </embed>
]]>
</MP3>
</beispiel>
<beispiel>
<screenshot>Bilder/Projektbilder/Logo_earthTV.jpg</screenshot>
<name><![CDATA[EarthTV Musik]]></name>
<kategorie><![CDATA[Musikproduktion]]></kategorie>
<beschreibung><![CDATA[Komposition und Produktion des Stückes "Steil" im Auftrag von EarthTV für deren Sendeformat bei Sevenload.]]></beschreibung>
<aufgabenfeld>Aufgabenbereich:* Musikkompostion * Musikproduktion</aufgabenfeld>
<bild1>Bilder/Projektbilder/peakmeter.jpg</bild1>
<bild2>Bilder/Projektbilder/headphones.jpg</bild2>
<bild3>Bilder/Projektbilder/keyboard.jpg</bild3>
<bild4>Bilder/Projektbilder/mic.jpg</bild4>
<theURL>
<![CDATA[
<p>
<a target="_blank" href="http://de.sevenload.com/sendungen/earthTV">EarthTV bei www.Sevenload.de</a>
</p>
]]>
</theURL>
<MP3>
<![CDATA[
<embed src="Songs/Electro/Steil.mp3" autostart="false" loop="false" width="300" height="18" controller="true" id="rock.mp3" name="bg song" pluginspage= "http://www.apple.com/quicktime/download/"> </embed>
]]>
</MP3>
</beispiel>
<beispiel>
<screenshot>Bilder/Projektbilder/Ortner_video.jpg</screenshot>
<name><![CDATA[Webdesign christian-ortner.de]]></name>
<kategorie><![CDATA[Webdesign]]></kategorie>
<beschreibung><![CDATA[Design, Programmierung und Webspace-Hosting der Internetpräsenz für den Berufsmusiker Christian Ortner.]]></beschreibung>
<aufgabenfeld>Aufgabenbereich: * Webdesign * Hosting und Domain * Programmierung</aufgabenfeld>
<bild1>Bilder/Projektbilder/Ortner_projekte.jpg</bild1>
<bild2>Bilder/Projektbilder/Ortner_video.jpg</bild2>
<bild3>Bilder/Projektbilder/Ortner_MP3.jpg</bild3>
<bild4>Bilder/Projektbilder/Ortner_kontakt.jpg</bild4>
<theURL>
<![CDATA[
<p>
<a target="_blank" href="http://www.christian-ortner.de">www.christian-ornter.de</a>
</p>
]]>
</theURL>
</beispiel>
<beispiel>
<screenshot>Bilder/Projektbilder/henriette_1.jpg</screenshot>
<name><![CDATA[Sounddesign für Filmprojekt]]></name>
<kategorie><![CDATA[Musikproduktion]]></kategorie>
<beschreibung><![CDATA[Sounddesign und Titeltrack des Abschlussfilms der beiden Filmhochschule Ilmenau - Absolventen Suzanna Gorolova und Laura Süßenguth.]]></beschreibung>
<aufgabenfeld>Aufgabenbereich: * Sounddesign * Musikkomposition</aufgabenfeld>
<bild1>Bilder/Projektbilder/henriette_1.jpg</bild1>
<bild2>Bilder/Projektbilder/henriette_2.jpg</bild2>
<bild3>Bilder/Projektbilder/henriette_3.jpg</bild3>
<bild4>Bilder/Projektbilder/henriette_4.jpg</bild4>
<MP3>
<![CDATA[
<embed src="Songs/Referenzen/Henriette.mp3" autostart="false" loop="false" width="300" height="18" controller="true" id="rock.mp3" name="bg song" pluginspage= "http://www.apple.com/quicktime/download/"> </embed>
]]>
</MP3>
<theURL>
<![CDATA[
<p>
Hier kann man das Video sehen:
<a target="_blank" href="http://www.youtube.com/watch?v=LdBnFKNVhTY">Henriette auf Youtube</a>
</p>
]]>
</theURL>
</beispiel>
<beispiel>
<screenshot>Bilder/Projektbilder/she_1.jpg</screenshot>
<name><![CDATA[Musikvideo "She said" für die Band gin mum]]></name>
<kategorie><![CDATA[Videoprodution]]></kategorie>
<beschreibung><![CDATA[Musikvideo für das Lied "She said" der lokalen Rock-Pop Band gin mum.]]></beschreibung>
<aufgabenfeld>Aufgabenbereich: * Videoediting</aufgabenfeld>
<bild1>Bilder/Projektbilder/she_1.jpg</bild1>
<bild2>Bilder/Projektbilder/she_2.jpg</bild2>
<bild3>Bilder/Projektbilder/she_3.jpg</bild3>
<bild4>Bilder/Projektbilder/she_4.jpg</bild4>
<theURL>
<![CDATA[
<p>
<a target="_blank" href="http://www.gin-mum.com">www.gin-mum.com</a>
</p>
]]>
</theURL>
</beispiel>
<beispiel>
<screenshot>Bilder/Projektbilder/Sim_thumb.jpg</screenshot>
<name><![CDATA[Imagefilm für die Firma "Sim-Events"]]></name>
<kategorie><![CDATA[Videoproduktion]]></kategorie>
<beschreibung><![CDATA[Produkttrailer und Imagefilm für die Simbacher Eventmanagement Firma Sim-events.]]></beschreibung>
<aufgabenfeld>Aufgabenbereich: * 3D Grafik-Animation * Musikkomposition * Musikproduktion</aufgabenfeld>
<bild1>Bilder/Projektbilder/Sim_1.jpg</bild1>
<bild2>Bilder/Projektbilder/Sim_2.jpg</bild2>
<bild3>Bilder/Projektbilder/Sim_3.jpg</bild3>
<bild4>Bilder/Projektbilder/Sim_4.jpg</bild4>
<MP3>
<![CDATA[
<embed src="Songs/Referenzen/Sim.mp3" autostart="false" loop="false" width="300" height="18" controller="true" id="rock.mp3" name="bg song" pluginspage= "http://www.apple.com/quicktime/download/"> </embed>
]]>
</MP3>
</beispiel>
<beispiel>
<screenshot>Bilder/Projektbilder/Logo_earthTV.jpg</screenshot>
<name><![CDATA[EarthTV Musik]]></name>
<kategorie><![CDATA[Musikproduktion]]></kategorie>
<beschreibung><![CDATA[Komposition und Produktion des Stückes "Horizon" im Auftrag von EarthTV für deren Webstreaming-Formate.]]></beschreibung>
<aufgabenfeld>Aufgabenbereich: * Musikkompostion * Musikproduktion</aufgabenfeld>
<bild1>Bilder/Projektbilder/mischklein.jpg</bild1>
<bild2>Bilder/Projektbilder/headphones.jpg</bild2>
<bild3>Bilder/Projektbilder/misch2.jpg</bild3>
<bild4>Bilder/Projektbilder/mic.jpg</bild4>
<theURL>
<![CDATA[
<p>
<a target="_blank" href="http://www.wetter.com/webcams_galerien/earthtv/">EarthTV bei www.wetter.com</a>
</p>
]]>
</theURL>
<theURL2>
<![CDATA[
<p>
<a target="_blank" href="http://www.hamburg-tourism.de/sehenswertes/webcam-earthtv/">EarthTV auf www.Hamburg-tourism.de</a>
</p>
]]>
</theURL2>
<MP3>
<![CDATA[
<embed src="Songs/Chill/Elf.mp3" autostart="false" loop="false" width="300" height="18" controller="true" id="rock.mp3" name="bg song" pluginspage= "http://www.apple.com/quicktime/download/"> </embed>
]]>
</MP3>
</beispiel>
<beispiel>
<screenshot>Bilder/Projektbilder/like_2.jpg</screenshot>
<name><![CDATA[Musikvideo "like a fool" für die Band gin mum]]></name>
<kategorie><![CDATA[Videoproduktio]]>n</kategorie>
<beschreibung><![CDATA[Editing des Musikvideos "Like a Fool" für die Münchner Band "gin mum".]]></beschreibung>
<aufgabenfeld>Aufgabenbereich: * Videoediting</aufgabenfeld>
<bild1>Bilder/Projektbilder/like_1.jpg</bild1>
<bild2>Bilder/Projektbilder/like_2.jpg</bild2>
<bild3>Bilder/Projektbilder/like_3.jpg</bild3>
<bild4>Bilder/Projektbilder/like_4.jpg</bild4>
<theURL>
<![CDATA[
<p>
<a target="_blank" href="http://www.gin-mum.com">www.gin-mum.com</a>
</p>
]]>
</theURL>
</beispiel>
<beispiel>
<screenshot>Bilder/Projektbilder/eromat.jpg</screenshot>
<name><![CDATA[Eromat Musikproduktion]]></name>
<kategorie><![CDATA[Musikproduktion]]></kategorie>
<beschreibung><![CDATA[Titeltrack für Hörbuch des Eromat Verlages und Corporate Sounddesign in Form eines Jingles für den Verlag]]></beschreibung>
<aufgabenfeld>Aufgabenbereich: * Musikkompostion * Musikproduktion</aufgabenfeld>
<bild1>Bilder/Projektbilder/mischklein.jpg</bild1>
<bild2>Bilder/Projektbilder/headphones.jpg</bild2>
<bild3>Bilder/Projektbilder/misch2.jpg</bild3>
<bild4>Bilder/Projektbilder/mic.jpg</bild4>
<MP3>
<![CDATA[
<embed src="Songs/Referenzen/Eromat.mp3" autostart="false" loop="false" width="300" height="18" controller="true" id="rock.mp3" name="bg song" pluginspage= "http://www.apple.com/quicktime/download/"> </embed>
]]>
</MP3>
</beispiel>
<beispiel>
<screenshot>Bilder/Projektbilder/Wildcats-Cover.jpg</screenshot>
<name><![CDATA[Highlight Video Kirchdorf Wildcats]]></name>
<kategorie><![CDATA[Videoproduktion]]></kategorie>
<beschreibung><![CDATA[Jahresrückblicksvideo der Kirchdorf Wildcats, American Football Mannschaft der 2.Bundesliga.]]></beschreibung>
<aufgabenfeld>Aufgabenbereich: * Videoediting * DVD-Authoring * Cover Design * Musikkompostion * Musikproduktion</aufgabenfeld>
<bild1>Bilder/Projektbilder/Wildcats-Cover.jpg</bild1>
<bild2>Bilder/Projektbilder/Wildcats_davor.jpg</bild2>
<bild3>Bilder/Projektbilder/Wildcats_Spiel.jpg</bild3>
<bild4>Bilder/Projektbilder/Wildcats_touchdown.jpg</bild4>
<MP3>
<![CDATA[
<embed src="Songs/Referenzen/Wildcats.mp3" autostart="false" loop="false" width="300" height="18" controller="true" id="rock.mp3" name="bg song" pluginspage= "http://www.apple.com/quicktime/download/"> </embed>
]]>
</MP3>
</beispiel>
</referenz>
Anyhing wrong with that or is the syntax correct so far?
Then you said that I have to change the columne type..... Right now I have those two columnes ("name" and "kategorie") set to "string" as you can see in the attached screenshot. Is that correct? If it is, the mistake must be something else I'm afraid.
Again, thanks for your support! :-)
And by the way, merry Christmas everybody! :-) -
Some browser doesn't display the MW page correctly
after installing Maintenance Wizard 2.17, some browser doesn't display the MW page correctly, some menu function is missing. The display problem is not for everyone, some user's browser have no problem. Some user's IE are displaying it correctly. i.e. one user has both IE and firefox working, however, after she clear her java cache, both browser refuses to display the MW page correctly.
The resolution of PCs is set to the same value. however, the size of the text isn't. after changing the size of the text, some of our pc start to work. The display web page for MW doesn't show the right most menu item. After resize the screen, we find it is because of the blue frame for the MW page that stop to dynamical stretch up to 20 inches.
The menu item is been streched out of the blue frame, they are no longer displayable
any ideas?We have the same problem.
And find it is caused by a combination of your screen resolution, font size and browser window size.
The blue frame that displays the Oracle Mainentance Wizard banner doesnt dynamical strech to the full window size.
After experiment with it, MW can display much better in our case. -
Verify_function doesn't display the error messge in oracle forms
We are planning to use the verify_function to validate the password when user password is expires.
The users are using Forms 6i on web.
When I set the profile to user verify_fucntion and then try to change the password with the default password change window , it doesn't display the error message if the crieteria doesn't match. Instead it just clears the screen. So the user doesn't get any idea what's going on.
has anybody seen this. We are trying to utilize the default password change functionality instead of coding our own.....in forms
Thanks,
DjIt can be that the spry:content does not support the function::<syntax> or that your impelementation is wrong. You can try this:
spry:content="function::FormatDate"
Like you would implement the function statement in the spry:if statements.
If that doesn't do the trick you need to modify the SpryData.js if you need this kind of support. -
HTMLDB's SVG doesn't display in SVG-enabled browsers
Hi,
HTMLDB's SVG doesn't display in SVG-enabled browsers, such as firefox 1.5
The problem is in file /i/javascript/plugins.js
function detectPlugin(){
It requires the Adobe SVG Viewer plugin, but firefox 1.5 has SVG capabilities by itself, without the plugin. Please fix the detection or simply don't try to detect anything and let the browser suggest what plugin is needed, if any.
ThanksHello,
While hacking around with this I figured out a way to enable svg rendering In Firefox 1.5 beta and IE.
When a chart is created the region src html is something like this
<div id="svgRegion"><embed src="f?p=&FLOW_ID.:&FLOW_PAGE_ID.:#SESSION#:FLOW_SVG_CHART_R#REGION_ID#" width="#WIDTH#" height="#HEIGHT#" type="image/svg+xml" /></div><script src="#IMAGE_PREFIX#javascript/plugins.js"></script>
Change it to be this
<iframe src="f?p=&FLOW_ID.:&FLOW_PAGE_ID.:#SESSION#:FLOW_SVG_CHART_R#REGION_ID#" width="#WIDTH#" height="#HEIGHT#" type="image/svg+xml" style="border:0;" frameborder="0" />
I would test this very carefully if you are using it in a production application but it is working for me here http://htmldb.oracle.com/pls/otn/f?p=11933:32
Carl -
N82, Gallery doesn't display pictures stored in th...
Hi!
Suddenly the gallery function doesn't display pictures stored on the memorycard. Well, not any files in the memory card.., doesn't recognize musicfiles either.
Is there a way to set the gallery function to display files in the memory card? It did automatically before.
New pictures are stored in the memorycard and also not displayed.
I can browse and open the pictures using the filemanager. If i copy them to the phonememory it also displays correctly..
I've upgraded the firmware but the problem remains..
Help much appreciated
Solved!
Go to Solution.glad its worked
If you find my post useful then click on
Kudos!Nokia N96 (v20.050 / RM-247)
www.shaysoft.net | Competitions! -
how can I operate multi displays on my Imac 21.5 quad core 2.5 using Lion and have each display function independently?
Below are some converters/adapters to look at. If these look like they may work:
USB 2.0 to HDMI Audio Video 1080P Adapter for Windows and Macbook
Matrox DualHead2Go D2G-A2D-IF (or look here)
These should allow you to run multiple displays in extended display mode. Note that these use HDMI as an output so you would need some additional adapter to conver HDMI to whatever your displays require. Of course these suggestions are all academic if such an adapter doesn't exist.
Update:
I just reread your last post and I am confused. Is it only your TV that you are trying to run in extended display mode? I thought you wanted more than two displays. If only the TV it should just work if you are not using mirrored displays. Your Displays Arrangement tab should show both your main screen (one with the little whith menu bar) and the TV. Set the proper resolution and refresh rate for the TV using it's Displays preference window. That is all you need to basically do (ignoring overscan/underscan problems).
Note, if you are using Lion then I have heard that when using full screen mode in Lion additional screens show nothing.
Maybe you are looking for
-
Does anyone know if any of the methods in the OracleDatabaseMetaData class alter or edit the structures you point them at? Specifically the getIndexInfo method. I have been running some small classes to try and retrieve index data from an Oracle 7 sy
-
Critical Error in Jco...
Hello All. I have a Swing Aplication using Jco to execute BW Queries. When execute a query with more than 10.000 registers. occurs the error TIME_OUT has exceeded the maximum permitted runtime without interruption, and has therefore been terminated
-
Using part of the 1TB TC Drive
I want to get TC to backup to Mac computers. I don't, however, want TC to use the entire 1TB for just two computers. I want to manually backup certain files. Is it possible to set TC to only use a certain amount of the hard disk and then be able to c
-
Date scope variant, help me please
in my query ,I create a variant of date scope,and the variant has a default value(2008.10.01 -2008.20.31),however,in visual composer I could not find the solution to this question,and when I use the following format for the default value in vc: DSTR
-
Help-think i have a kernel panic
I need help, every couple of months my computer goes nuts and crashes either when i start up or when using the internet or entourage mail. Usual starts with colored little dots on the screen and then the screen goes grey and the restart message shows