FAGLL03, FS10N (Layout), FBL3N  Customer No not Pick

Dear All,
when my user go for GL line item level through FAGLL03, FS10N (Layout), FBL3N customer no not picking line layout
In that perticuler GL account Sort key also assign Customer no but line layout cutomer field is there but not pick the customer no
Pl help this issue
Regards
KSP

Hi:
          I again assert the same thing..No matter what you maintained in sort key field like PO numbers, vendor or customer numbers can be fetched in reports in FBL3N, FAGLL03 or FS10N line items.. Reason i quoted above..However you have an option to fetch this field using Business transaction event 1650 using FIBF..Your ABAPER will need to modify structures and then modify the contents..Please check it with your ABAPER , i am sure you will get your issue resolved..
Regards

Similar Messages

  • Customer number not picked up

    Hi Friends,
    i have created a 3rd party sales order, as you are all aware the purchase requisistion gets automatically created in the back ground, now if i go and the PR to my suprise there is no customer which should be present in delivery address tab, instead of that adress number of that customer has picked up.
    please be aware sold to party and ship to party are different.
    earlier the customer was reflecting in PR under delivery address tab and now suddenly this is not picked up.
    kinldy let me know what needs to be checked for customer number vanishing.
    regards
    Prasadnaidu

    Hi PrasadNaidu
    I agree with navneetha comments also. Please check the configuration ,and also Please check the other documents which has been created with the same data. If old documents data is coming correctly then kindly debug then only you know what is  the issue also. so kindly take the Technical team help
    Thanks and Regards
    Srinath

  • Customer document number not picked while making payment

    Hi  guys
    we have one vendor the same vendor as customer also. while we making payment to vendor customer document document number not picked,, the erro message comes.. " NO APPROPRIATE LINE ITEM IS CONTAINED IN THE DOCUMENT"
    But we already assigned the following:-
    1) In Vendor master data, Customer code has been given
    2) In  Documnet type KZ, we select vendor also.
    But still the customer document not picked while  making payment
    Pl Help me out.
    Regards
    K.Gururajan

    Hi,
    Check the following:
    1. The check box clearing with customer and clearing with vendor has been selected in both the masters in the payment transactions tab.
    2. Ensure the vendor is not locked up in any payment proposal in F110.
    Thanks
    Aravind

  • Custom Manage Property does not pick up the value from mapping crawl property

    Hi All,
    I have created a custom list with the column name that's called "category".
    Then I ran full crawl and I saw the "ows_category" crawl property is created.
    Then I create the manage property names as "Category" and map with the "ows_category" and run the full crawl again. (Retrivable, Searchable, Refinable options are checked)
    After full crawl, I searched Category:keyword but it returned 0 result. 
    But when I search keyword, that list item is retuned
    I tried to debug with the spsearch2013 tool and there is no "Category" manage property in the return XML.
    It seems the Manage Property does not pick up value from the crawl property. (Something might be wrong with the index schema)
    Do you have any suggestion?
    Do I need to reset the index?
    Best Regards,
    Andy

    Hi Andy,
    When you search ‘category’ in crawled properties(Central Administration->Search Service Application->Search Schema), you will see ows_Category is mapped to DiscussionCategory, like the screenshot:
    So, I suggest you create a new column using another name, then test again, compare the result.
    Best Regards,
    Wendy
    Wendy Li
    TechNet Community Support

  • FBL1N not picking up customer itesm

    Hi Guru,
    could you please share your expeirence is such issue where we are running FBL1N, Vendor line item report with selection creterion for Customer Lines apart from Normal items.
    Normally system picks up Vendor line items and also customer line items, if customer and vendor are linked to each other. but in a particular case system is not picking up customer lines, its only showing vedor lines. Also when I run FBL5N for customer which is linked to same vendor where there is a problem, system work correctly and it shows customer lines as well as vendor lines.
    It would be great if you can suggest your idesa as to why system is behaving in such a way.
    Thanks & regards,

    Hello,
    You might check if there is some archived information. Select the option
    "Data Sources" and setting the flag for the "Archive" data.
    Best Regards

  • SAP web AS not picking up my custom actions defined jar

    Hi,
    I added some custom actions in the config.xml of the SAP Internet Sales Application, but noticed that this server is not picking up the jar file in which I defined my custom actions. This happens even though I placed the jar file directly under the WEB-INF/lib folder.
    When I go through the logs, I see that under the resources, it picked up all the jars except mine. Is there a place where you define what jars to pick up with in the WEB-INF/lib folder.
    Thanks
    SK

    Oh yes, there is.
    In NetWeaver never place any files into directories and expect them to work. You MUST deloy them regularly.
    On every start the server checks the files against what is in the DB and I don't know what it does in case of no file in DB, but it may even delete it...
    Regards,
    Benny

  • Additional fields not showing in FS10N layout

    Hi ,
    1) appended new fields into RFPOS and RFPOSX structures and run the program RFPOSXEXTEND
    2) created BTE to get values for additional fields added
       it was fine working in DEV , once it move to QAS additional fields are not showing in the FS10N layout
    same steps are processed as in QAS as i din in DEV, sturcture as got fields and BTE is fine
    Why the additional fields are not showing up ...
    Regards,
    Pradeep

    How come i would be posting here without checking the layout , new fields are not in the layout even though it shows in the structure RPOSXEXT.
    FS10N layout  - added new fields in dev using structure and run the program to extend the structure , new fields and data show in DEV , same process i did but it doesnt show in  QAS .
    Would be any configuration issue or any other i need to check ....
    Edited by: Pradeep Annaiah on Jul 20, 2011 10:35 PM

  • FAGLL03 or in FBL3N Display of Line items by variant attributes

    Hi Guru's
    In FAGLL03 and in FBL3N, when I select fiscal year and posting period fields from dynamic selection and in Variant attributes under dynamic selection for fields Fiscal Year and Posting Period ,selection type S ..for type Selection variable I selected T i.e T: Table Variable from TVARVC and in Name of Variable (Input Only Using F4) I selected Variable name.
    I want the line items to be displayed for fiscal Year and Period that is maintained in that Table. i.e as per our client our fiscal year is 2012 and Period is 2 , this values are there in tht table but when I select the variant in Both FBL3N or in FAGLL03 , its displaying complete details.
    as a work around I have given fiswcal year and posting period manually..which is not my requirment.
    I want to add this variant to a batch job so tht it will automatically pick the report with current details.
    Please Suggect and help ..
    Thanks in advance
    Goutam

    Issue is Solved.

  • Investment Order not picking

    hi all,
    I am not able to trace the date of the Investment Order in the Asset master data....
    I have made the IO has the optional in the Asset Master data in the Screen layout... eventhough it is not capturing the data..... what could be the reason?....
    as far as my thinking that it will pick the new data which we create the new asset from now onwards.. But it is not picking for the new Assets also.....
    Please let me know what and where should i have to change it....
    Waiting for the inputs...
    Cheers

    hi Vishal and Paul,
    Let me expalin my process what i am doing and it is not tracing the Internal order in fagll03 report for the Depreciation account ( xxxxx) in the Assets side.....
    Process is
    Step 1: I have created the Asset and enter the Investment Order also I:e it is linked to the Internal Order.
    Step 2: Posted through F-90
    Step 3: Run the Depreciation for that Asset.
    Finally When i see the FAGLL03 for that Depreciation account (xxxxx) it is not reflecting....  What could be the reason?
    Please assist me....... is there any settings for this to effect?
    Cheers

  • TDS liability line items are not picking in u2013 J1INCHLN

    Hi Experts
    During depositing of TDS through J1INCHLN it is not picking all line items i.e. available in Ledger (FBL3N). We came to know after reconciliation even as all line items are available in table With_item as uncleared.
    We are facing this problem as the data from 01.03.2009u2026. Previously everything was working fine.
    One more thing I will stress here that we have started Purchase Order based invoice verification also from this period.
    Pl help ASAP.
    Regards
    Kuldeep Dubey

    check the line of TDS is having the Business Place, if the business place is not capturng in TDS line items , then the create the substitution for Business Place & Section Code.
    without business place in TDS line items you can't make the TDS payment.
    Regards
    Akmal

  • How can I tally the fs10n and fbl3n balance?

    Hi sap gurus,
    I have got issue regarding the fs10n and fbl3n balance variance in production system.
    Hence i would like to request you all please provide solution for early.
    Advance thanks
    Regards
    Rakesh

    the file system including all the data pertaining to that partition is closed on windowsphone8, unlike that of Symbian.
    the only part you will be able to see is what you would see in this post here: /t5/Nokia-Lumia/Transfer-file-for-920/m-p/1605954#M24335
    the rest is locked unless you have developer access, and even then not much as you would just use the SDK to make your applications.

  • Receiving Open Interface not picking Inter-Org records from Interface

    Hi,
    I am trying to receive the inter org transfer through the Receiving Open interface, but the interface not picking the data from the interface tables (RCV_HEADERS_INTERFACE, RCV_TRANSACTION_INTERFACE).
    I am in 11.5.10.2, all the sources worked fine like Vendor, Internal Order, Customer but the issue is with the Inventory source (inter orgs)
    Please could you advise what could be the reason for the interface for not picking the Inventory source data from the interface table.
    Below are the interface insert script that am using..
    INSERT INTO RCV_HEADERS_INTERFACE
    (HEADER_INTERFACE_ID,
    GROUP_ID,
    PROCESSING_STATUS_CODE,
    RECEIPT_SOURCE_CODE,
    TRANSACTION_TYPE,
    AUTO_TRANSACT_CODE,
    LAST_UPDATE_DATE,
    LAST_UPDATED_BY,
    LAST_UPDATE_LOGIN,
    CREATION_DATE,
    CREATED_BY,
    SHIPMENT_NUM,
    RECEIPT_HEADER_ID,
    SHIP_TO_ORGANIZATION_ID,
    EXPECTED_RECEIPT_DATE,
    EMPLOYEE_ID,
    VALIDATION_FLAG
    VALUES
    (rcv_headers_interface_s.nextval , --Header_Interface_Id
    rcv_interface_groups_s.nextval, --Group_Id
    'PENDING', --Processing_Status_Code
    'INVENTORY', --Receipt_Source_Code
    'RECEIVE', --Transaction_Type
    'DELIVER', --Auto_Transact_Code
    SYSDATE, --Last_Update_Date
    -1, --Last_Updated_By
    -1, --Last_Update_Login
    SYSDATE, --Creation_Date
    -1, --Created_By
    'ICR-001', --SHIPMENT_NUM
    21073573, --RECEIPT_HEADER_ID
    2266, -- SHIP_TO_ORGANIZATION_ID
    SYSDATE+1, --Expected_Receipt_Date
    5543, --Employee_Id,
    'Y' --Validation_Flag
    INSERT INTO RCV_TRANSACTIONS_INTERFACE
    (INTERFACE_TRANSACTION_ID,
    GROUP_ID,
    LAST_UPDATE_DATE,
    LAST_UPDATED_BY,
    CREATION_DATE,
    CREATED_BY,
    LAST_UPDATE_LOGIN,
    TRANSACTION_TYPE,
    TRANSACTION_DATE,
    PROCESSING_STATUS_CODE,
    PROCESSING_MODE_CODE,
    TRANSACTION_STATUS_CODE,
    CATEGORY_ID,
    QUANTITY,
    UNIT_OF_MEASURE,
    ITEM_ID,
    AUTO_TRANSACT_CODE,
    SHIPMENT_HEADER_ID,
    SHIPMENT_LINE_ID,
    SHIP_TO_LOCATION_ID,
    RECEIPT_SOURCE_CODE,
    TO_ORGANIZATION_ID,
    DESTINATION_TYPE_CODE,
    DELIVER_TO_PERSON_ID,
    LOCATION_ID,
    DELIVER_TO_LOCATION_ID,
    SUBINVENTORY,
    LOCATOR_ID,
    HEADER_INTERFACE_ID,
    VALIDATION_FLAG,
    SHIPPED_DATE
    --SELECT
    VALUES
    rcv_transactions_interface_s.nextval, --Interface_Transaction_id
    rcv_interface_groups_s.currval, --Group_id
    SYSDATE, --Last_update_date
    -1, --Last_updated_by
    SYSDATE, --Creation_date
    -1, --Created_by
    -1, --Last_update_login
    'RECEIVE', --TRANSACTION_TYPE_RECEIVE
    SYSDATE, --TRANSACTION_DATE
    'PENDING', --PROCESSING_STATUS_CODE
    'BATCH', --PROCESSING_MODE_CODE
    'PENDING', --TRANSACTION_STATUS_CODE
    203, -- CATEGORY_ID
    20, --QUANTITY
    'EACH', --UNIT_OF_MEASURE
    4379131, --ITEM_ID
    'DELIVER', --AUTO_TRANSACT_CODE
    21073573, --SHIPMENT_HEADER_ID
    16566939, --SHIPMENT_LINE_ID
    101629781, --SHIP_TO_LOCATION_ID
    'INVENTORY', --RECEIPT_SOURCE_CODE
    2266, --TO_ORGANIZATION_ID
    'INVENTORY', --DESTINATION_TYPE_CODE
    13706, --DELIVER_TO_PERSON_ID
    101629781, --LOCATION_ID
    101629781, --DELIVER_TO_LOCATION_ID
    'FG', --SUBINVENTORY 
    46259, --LOCATOR_ID  
    rcv_headers_interface_s.currval, --Header_interface_id
    'Y', --VALIDATION_FLAG 
    SYSDATE
    Thank you,
    Genoo
    Edited by: Geno on May 25, 2013 4:54 AM

    Any suggestion/advise please!
    Thanks,
    Genoo

  • Excise duty is not picking up for a business area

    Hi,
    please help me  ,The problem is
    while creating invoice it is found that exice duty is not picked up by the system for that invoice for a particular business area , so please suggest what setting has to be checked to rectify the error.Is
    Thanks
    Ahsan

    Excise Duty will flow based on your plant and CIN settings and not based on your business area.  So first check in your sale order / billing document whether plant is flowing.
    If you are in TAXINJ, ensure that you have maintained both the customer code and material code in J1ID.  If you are in TAXINN, ensure that the relevant tax code with that ED condition type is maintained in FV11
    thanks
    G. Lakshmipathi

  • XML Publisher:Concurrent Prg not picking the RTF Template

    Hi All,
    We developed the rdf report and design the layout and we registred it.when we run the concurrent program program is not picking the RTF template.
    We are using the Following version.
    Oracle Apps 11.5.10
    xml pub is 5.6.2
    So please do the need ful, pleaseeeeeeee
    Thanks & Regards
    Leela

    that suggests you haven't got the setup of the data definition and/or the layout template right.
    Go into the XML Publisher administrator responsibility and select 'Data Definition'
    You need to make sure that when you create the data definition it has the same code as the concurrent program short name and application. This is the connection between the two.
    Having create the data definition, click on the 'Templates' tab and create a template. It should connect with the data Definition you have just created.
    Now upload your layout template file.
    If you have this right, then you will be able to see the layout template from the onsite setting tab.

  • Query is not picking the data from multiprovider

    Hi All,
    i have defined a query on a multiprovider which is made up of three ods one from sales orders, delivery, and billing but when i run the query ...its not picking up order quantity for some sales orders and also its not picking all the items available for that orders...but for some orders its picking up the order quantity but not delivery quantity...
    order quantity is coming from sales orders ods and delivery quantity is coming form delivery ods, billing quantity is coming from billing ods...can somebody help me with a suggestion like what could be ther problem...
    any sugestions will be highly appreciated.
    with regards
    harish

    dear Harish,
    multiprovider works as union,
    you have order, delivery, billing, e.g the data like
    order
    orderno orditem customer product ordqty
    ORD001  1       a        x        10
    ORD001  2       a        y        20
    ORD002  1       b        x        30
    delivery
    delvno delvitem customer product delvqty
    DLV001  1       a        x        8
    DLV002  1       b        x        25
    billing
    billno billitem customer product billqty
    BIL001  1       a        x        8
    multiprovider
    orderno-orditem-delvno-delvitem-billno-billitem-customer- product-ordqty-delvqty-billqty
    ORD001  1   blank blank blank blank    a        x        10 blank blank
    ORD001  2   blank blank blank blank     a        y        20 blank blank
    ORD002  1   blank blank blank blank    b        x        30 blank blank
    blank blank DLV001  1 blank blank      a        x        8
    blank blank DLV002  1 blank blank      b        x        blank 25 blank
    blank blank blank blank BIL001  1       a        x        blank blank 8
    what can you do is remove order no, order item, delivery no, delivery item, billing no, and billing item from query row area.
    hope this helps.

Maybe you are looking for