Fail and dead bios ge60 0nd.help!!!!

hi .
i update bios ge60 0nd with AMI utility first time from E16GAIMS.10A to E16GAIMS.10F
for this i restart pc and laptop boot fine . for a second time i update from E16GAIMS.10A
to E16GAIMS.514 and after restart the laptop dead and dont show anything on screen.
i use AMI recovery with "ctr"+"home" and rename bios file to AMIBOOT.ROM and dont help .
Who knows What should I do? are bios chip in this version can be replace with new?
if i send it to support team they van be flash or they replace with new bios chip or replace motherboard? How much will it cost?

The repair fee varies from the region, you can just call the local service center to get the exactly information.

Similar Messages

BIOS and Virtualization Issues - GE60-0ND

After extensive searching through this forum, and googling in general, I have been unable to identify any solid answer. So here's the background:
I purchased the MSI GE60 0ND-042U over a year ago. Upon receipt, I immediately swapped out the hard disk for a SSD, and loaded a clean install of Windows 8 on it. Everything worked out just fine.
Now, I'm trying to run Windows Phone emulators in Visual Studio Express, which requires Hyper-V virtualization. Hyper-V will not enable within Win8's "Programs and Features" menu. Running "systeminfo.exe" from a command prompt yields the following:
"Virtualization Enabled in Firmware: No"
At which point I'm directed to enable said features in the BIOS. The related options for virtualization in the BIOS are nowhere to be found. Further searching recommends updating the BIOS.
My current BIOS information is as follows:
Per "systeminfo.exe": American Megatrends Inc. E16GAIMS.108 5/2/2012
Per MSI Live Update 6: MS-16GAE 1.80
MSI's support page for my product has two BIOS updates, one for Win7 and one for Win8. Neither of them match what I currently have. Additional searching through this forum yields more confusion - I've learned that I should NOT update to the Win8 BIOS, since my notebook was packaged with Win7. I've learned that I should NOT update to the Win7 BIOS, since my notebook is currently running Win8.
Would a BIOS unlock help? Am I SOL?
As you might have guessed by now, I'm not familiar with BIOS updating, and have no experience with it. To those who can help, I appreciate your time, and look forward to your response!

Update your BIOS to the latest version .10F for your NB:
http://download.msi.com/bos_exe/E16GAIMS.10F.zip
>>Use the MSI HQ Forum USB flasher<<

Request Custom or Unlocked BIOS GE60 0ND-257US

Hi Svet,
I am running Linux on the GE60 0ND-257US, Product Number 9S7-16GA11-257.
My problem is that there are no Linux nvdia drivers which will let me run the nvidia card, only the Intel card (my card is a "Hybrid" optimus card) so I cannot get the full capability of the card.
My card is the stock GEForce GTX 660M.
The only way for me to workaround is to find a way in BIOS to disable the Intel card and only run the 'discrete' nvidia.
I would then be able to install nvidia drivers and probably get more out of the card.
The stock BIOS on this laptop is geared for Windows 8 and I really have a problem with that.
I would like to have a fully unlocked BIOS with full configuration options available, no Windows 8 features, etc. This should then have a way to switch off (and on, a toggle switch) Intel card and have only nvidia card running.
Is there anyway this can be done?
(I am running in legacy MBR mode.)
I am neither a BIOS nor an nvidia expert (not afraid to flash BIOS) but may not have explained the above properly.
Feel free to ask more info.
Thanks.

1 see here for some of them as example: https://forum-en.msi.com/index.php?topic=164130.msg1203494#msg1203494
2 we will stick to approved flashing methods, as not tested flashers may brick the NB
3 yes that's correct
4 to tell me current BIOS and EC versions that's installed [you can look for them in bios setup system info]
and donation at: https://forum-en.msi.com/index.php?topic=134259.0

Whenever i try to download Adobe after effects it says installation failed and it does nothing PLEASE HELP ME

I tried to install after effects but then it said installation failed and came up with this :
Exit Code: 6 Please see specific errors below for troubleshooting. For example, ERROR: DS012 ... -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 7 error(s) ----------- Payload: Adobe After Effects CC 2014 Presets 13.0.0.0 {B11629D3-E9EE-467B-B9C6-30D37E2A39CF} ----------- ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 351) ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 683) ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 685) ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 687) ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 689) ----------- Payload: Microsoft Visual C++ 2008 Redistributable Package (x86) 9.0.30729.5677 {539B5BB0-18F9-11E2-BBBC-00215AEA26C9} ----------- ERROR: Third party payload installer vcredist_x86.exe failed with exit code: 1603 ERROR: Failed to install Microsoft Visual C++ 2008 Redistributable Package (x86). Please try installing it by double clicking on the executable at "C:\Users\Aejeaz\AppData\Local\Temp\{907694F0-1B67-475C-8E74-2B81DF08E30B}\AfterEffects_13_LS20\Adobe After Effects CC 2014\payloads\Microsoft VC 2008 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2008 Redistributable Package (x86) from Microsoft website - www.microsoft.com -------------------------------------------------------------------------------------

JazzGames please see Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html for information on how to locate and interpret your installation log files. You are welcome to post any specific errors you discover to this discussion.

Flashing of MSI Z87-GD65 GAMING failed and dual bios not helping, not sure why?

Hi all
For the first time in 20 years Ive had a firmware flash fail it seems.
I have a MSI Z87-GD65 GAMING and updated the bios with the latest firmware via the "M-FLASH" utility within the systems bios.
All seemed to have gone well, it flashed to 100% rebooted and then just a blank screen and a sequence of keyboard light flashes.
After a minutes panic I thought not to worry, the motherboard has a dual bios. So I powered down and switched the bios switch to bios B hoping it would assist and the problem is identical.
Any tips anyone?

I just tried this along with removing power from the main board and it seems one of the two did it! thanks

TS1424 Secure Link to iTunes Store failed, and when I click on Help, the help box is blank. I have a 25Mbit up and down. 64 bit PC running window 7 home premium

Secure Link to iTunes Store Failed. When I click on the help button to the right, and the new help window pops up, it is blank with zero infomation on how to correct the "Secure Link to iTunes Store"

A few things may resulted in this. Did it just happen over night?
Can you make sure your date, and time including time zone settings are correct?
What are you using to correct from?

Shared volume file transfers fail and kill my RAID. Help!

Hi all,
I'm not an IT expert by any stretch, so please go easy if my questions are stupid. First, a quick rundown of my setup:
Xserve Quad with 10.5.2
Areca 1220ML RAID card (this is a hardware RAID card with 256MB)
NORCO 1220DS 8-drive RAID box
Multiple sharepoints all coming from RAID box (one 4-drive RAID5 and several single drive passthroughs)
Trunked 2GB connections to most client machines, client connect using AFP
I have been experiencing potential signs of the issues others are having here (AFP etc.) but the most troubling is that occasionally, when attempting to move a folder from one sharepoint to another (whether doing this from a client machine or on the server directly) or when moving files from a client machine to the sharepoint, finder will hang after moving 84kb or so, I get the beachball, and end up having no choice but to force reboot the system. Upon restart, sometimes the RAID volumes are all present and working, but several times the drives just disappeared outright and the admin tool for the RAID card says the RAID volume/passthrough drive has failed. I have to rebuild them and lose every ounce of data. Yay!
Is this a familiar/known type of problem to anyone out there? I am not quick to assume the card is at fault, as it is a reasonably expensive hardware-based RAID card and its drivers are built in to with Leopard Server 10.5 (there is even speculation that Apple's own RAID card is based on Areca's) which tells me they've passed a quality test to some degree.
This problem doesn't always happen, and there are times where it will happily transfer large quantities of giant files with no problems. It usually seems to glitch out when some time has passed since the last attempted file transfer, which makes me wonder if this might be part of the dreaded AFP disconnect issues.

I just wanted to close this question out and let the community know that I isolated the problem down to my RAID box, the NORCO DS-1240. These things have been noted to have build issues, including the excessive use of solder and other issues that lead to shorting out etc.
After hours in tech support land, I replaced it with a Enhance Technologies EnhanceBox and everything now works beautifully.

Firmware update failing and constant restart loop PLEASE HELP

I was updating my firmware, the update that fixes problems with batteries over 1000 loads.
The loading bar on the apple screen gets half way, then it shuts down. I turn the computer on again and it just repeats.
Please help.

Just giving an update incase somebody else might have this problem too.
I took it to my local Mac repair shop and it turns out there was actually a problem with my hard drive, and the fact it decided to happen right after my firmware update was just a coincidence.

Unlock request ge60 0nd free dos E16GAIMS.10A

hi svt .
please help for unlock bios ge60 0nd free dos and now bios version is :E16GAIMS.10A
i dont have paypal or etc becuase im living in iran . can you accept itunes gift card for donate??

Hello, yes all possible bios options can be unlocked.
About updated, you already are using latest version for your notebook,
but Intel SATA rom version can be updated.
Quote
with all supported settings
i can't say what settings will be supported and which one not,
but to unlock all of them.

Satellite A500-1DN (PSAR3E) - Dead BIOS after flashing

Hi all.
At first, sorry for my english.
My problem is simple I have a dead bios after flashing from toshiba service station (or something like that).
How does it happened? :4 days ago it was asking me for update. It was for me totaly normal because it is asking for some updates every day. I enablished that update and after some cliks on button next I noticed that it was BIOS update and it was nearly at half. I wanted to wait to end (because i know if I stop bios uptade I end up with dead bios(corrupted bios)) but it stoped nearly at end and it showed me some errors. After that my laptop made a restart and i could not stop it. It turned off.
Now if i push power button i get black screen (like it is turned off) som leds lights and Cpu fan at 10% maybe.
What i did 3 last days? : I searched all the interned about what to do with it. I tried maybe 10 types off crisdisks with usb and CD(with floppy not becose Bios for my laptop is too big for 1 floopy).
I tried to boot with FN+B it worked for me CD drive started to search for CD, USB drive showed activity but to dead end happened nothing. I tried to make Boot usb with newer minidos.sys and phlash16.exe. I tried to combinate it but still nothing.
I tried all what i found on forums everywhere on internet. nothing helped.
Another thing is that only one bios i found was 1.90. If somebody has a older bios for my laptop pls give me link. I am losing hope becose i cant find anithing on google.
I am a advenced user I did nearly everithing with pc but i never worked with dead bios.
Pls help me somebody and give me a correct crisdisk for my model. Or different sugestion.

hi,
sorry, mate but you should contact the Asp http://eu.computers.toshiba-europe.com/innovation/generic/ASP_SUPPORT/
Unfortunately, the warranty doesn't cover bios failure and you will have to pay about 50-60 Us dollars (Anyway, it costs like this in my service center)

MSI GE60 0ND BIOS and EC Request

My System (GE60 0ND-228XTH) came with FreeDos pre-installed.
BIOS Version: E16GAIMS.10F
BIOS Build: 12/18/2012 15:20:43
EC Version: 16GAEMS Ver4.04
EC Build: 04/26/2012
The real need of this request is to fix the Wireless Connection Drop issue (happens randomly or after waking up) occurred in Windows 8 OS.
I have tried ...
- Every combination of BIOS/EC that are provided in the official MSI page and compatible with my System.
- Every SCM that is compatible with Windows 8 OS.
- Any solution about Connection Drop issue in Windows 8 OS.
but still no luck.
The best bet is to use
- E16GAIMS.10F BIOS
- 16GAEMS1.505 EC
Though the problem still persist, the frequency of occurrence is less than other approaches.
Since this above EC firmware is for Windows 8 System, so this is not the best workaround for my system.
That is why my assumption came up with BIOS/EC and made this request.
This problem is NEVER shown in the Windows 7 OS and any Linux Distributions.
Also, can you add any updates possible for BIOS and EC.
I will make a donation as soon as possible after your confirmation.
Thank in advance.
Edit: Added Current BIOS Configuration Screen.

Quote
its probably wifi driver related or something specified for win8
try different wifi drivers
I already tried many drivers from the MSI itself, Intel, even other Notebook Manufacturers, but still not working.
I have tested Windows 8 in my friend's notebook(DELL) that has similar Wireless Adapter and everything working fine without issues like mine, so that means Windows 8 is not the culprit.
Quote
try set wifi to max performance from power profiles
This is one of solutions I've tried long ago and it failed.
Anyway, thank for your response.

MSI GE60 0ND-296NE unlocked Bios request

I have the GE60 0ND-296NE
Mainboard: MS-16GA
PCB Version: REV:1.0
BIOS Version: E16GAIMS.513
BIOS Date: 11/8/2012
EC-FW Version: 16GAEMS1.504
I would like to update to the 514 bios and the 506 ec-fw with unlocked bios options. I am also having a hard time flashing the updated bios with the msihq tool. the tool gives me an error with the bios archive. it says the archive should be extracted and then to use mode 2 to select the bios file directly but on my nb mode 2 is not an option. i do not have the option to update the bios from the bios either. any help would be appreciated and of course a donation made for your services.

Quote from: darksideauto on 09-March-14, 07:39:30
the links to efi-auto.zip are all dead.
UPDATE: i downloaded the bios update for the ge60 20c. then i borrowed some of the files from that archive and edited the batch files and put them in the 0ND 514 bios archive. then i used the msihq tool to flash. i probably shouldnt have tried anything like that but it worked. i dont recommend anyone else try it!
Quote from: darksideauto on 09-March-14, 07:39:30
the links to efi-auto.zip are all dead.
weird i don't know the new links
Quote
UPDATE: i downloaded the bios update for the ge60 20c. then i borrowed some of the files from that archive and edited the batch files and put them in the 0ND 514 bios archive. then i used the msihq tool to flash. i probably shouldnt have tried anything like that but it worked. i dont recommend anyone else try it!
oki, so are you running .514 now?
Quote from: darksideauto on 09-March-14, 09:38:26
Also im still interested in the unlocked bios.
oki, i can start working on it once donation is received, and to send back to you when its done

Request BIOS to fix an USB flash drive boot problem in EFI (GE60 0ND-265FR)

Hello,
I'm currently trying to install Ubuntu on my MSI GE60 0ND notebook but I'm having troubles to boot on my USB flash drive in EFI mode.
I've disabled Fast Boot and Secure Boot options but the only thing I can have is the GRUB menu of the liveUSB and whatever option I try I always get a blank screen. On the other hand everything works fine when I set the BIOS on Legacy mode.
It's the same problem they have on this thread : https://forum-en.msi.com/index.php?topic=165756.0 but with an other notebook.
The problem is I want to keep Windows 8 side by side with Ubuntu so I must have them both installed in EFI mode.
I asked for help on a specialized forum (french Ubuntu's community) and they believe this problem is related to the BIOS. Do you think an unlocked BIOS will help with that ?
Here are my current BIOs and EC infos :
BIOS Version : E16GAIMS.514
BIOS Build : 03/12/2013
EC Version : 16GAEMS1 Ver5.05
EC Build : 02/21/2013
Thanks for your help, and sorry if I've made English mistakes.

i don't know if unlocked BIOS can help you with this

Private Bios For GE60 0ND

Hi Svet,
I read forum and i want to new private bios for my GE60 0ND. I use Windows 8.1 and lastest bios and firmware.
I just want, Super Raid mode on, now just IDE and AHCI enabled.
Unlocked bios and re edited fan table. Because my cpu fan never stop. :(
My PayPal Confirmation Number is 64385335DD680132R. Its a little bit but i will make new donation after your work.
Thanks. I will wait you.
My Bios: http:// download.msi.com/bos_exe/w8_E16GAIMS.514.zip
My Firmware: http:// dl.msi.com/download_files/frm_exe/w8_16GAEMS1.506.zip

Quote
I just want, Super Raid mode on, now just IDE and AHCI enabled.
can't help with this, can't add something that isn't there.
Quote
Unlocked bios
oki, its possible
Quote
and re edited fan table. Because my cpu fan never stop. :(
you want the FAN to turn off on idle or?

BIOS update, GE60 0ND-296NE

Hi,
I´m have some questions when it comes to upgrading BIOS on my GE60 0ND-296NE.
My notebook came with win8 pre-installed, but when i check my current BIOS version it says: E16GAIMS.10E, which I think is kind of strange. As I understand it, this version is for notebooks that doesn´t come with win8 pre-installed?
I´m guessing that i have to use the BIOS version for win7, but I would really like to be able to have the BIOS for win8, is there any way i can flash win8 BIOS if I´m currently using the win7 version (E16GAIMS.10E)?
Thanks in advance.

Thanks for the reply.
No, there is no windows key on a sticker at the bottom of my notebook, neither on the adapter where they sometimes put it, but I have a windows 8 sticker on the top (just a sticker that says Windows8).
I don´t know if the information below matters, but it probably doesn´t hurt.
I bought the notebook refurbished, and I believe that they have changed the motherboard (but it´s the same model as the original, MS-16GA). They had also forgotten to format the hard drive, so I had to do a reset (Remove everything and reinstall Windows, in windows 8) and when I had windows installed again it said that the serial code for windows was invalid, so i had to use a new windows key.

Fail and dead bios ge60 0nd.help!!!!

Similar Messages

Maybe you are looking for