Fail and Diswork

Problem: PremierePro can get started, but Can't Be USED since...dunno. Updatefail --> ALL, AMM helpt out, but not fully.
Fail:
Adobe Premiere Pro CS6 6.0.2 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I208
DPS Desktop Tools CS6 2.06.2 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I216
Extension Manager 6.0.5 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I208

Run the Creative Suite Cleaner Tool, reinstall from scratch.
Mylenium

Similar Messages

How can I install Adobe Photoshop Elements Update 9.0.3 after I get a message that Installation has failed and the solution is not in troubleshooting or forums?

My Photoshop Elements 9 stopped working a couple of weeks ago. When I clicked the PSE button nothing happened. I tried this several times over a few days and it still failed. I uninstalled the program and re-installed it. It worked well. Then I tried to install the Update 9.0.3. The download was almost successful. When it was about to show 100% successful for the download, an error message said the installation had failed and that I should try later. I tried this many times over a few days and the same result occurred. I tried troubleshooting and the answers to questions, but I could not find an answer. I don't know where to go to see if anybody has answered my question. How can I install Update 9.0.3?
Colin Hansen

Try downloading and installing the 9.0.3 updater from here:
mac
Adobe - Photoshop Elements : For Macintosh
windows
Adobe - Photoshop Elements : For Windows

My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

Hello SamSax
Check out the assist page below for troubleshooting call connectivity.
Calls and connection issues
http://www.apple.com/support/iphone/assistant/calls/
Thanks for using Apple Support Communities.
Regards,
-Norm G.

I have a 27" imac (intel) my hard drive failed and I installed a new one. This is my first time dealing with this so I am having trouble re-installing the OS. Install disc spits out and ? mark with folder appears what am I missing?

Like the title says. My 1 TB drive failed and unfortunately my computer isn't covered on the replacement program even though my hard drive is the one they are claiming to replace. So that is not a solution just to get that out of the way. So I replaced the hard drive. What I am having trouble with is re-installing my OS. I have 10.6. When I load it and restart it just spits it out and I get the question mark folder. What am I doing wrong is there a step I'm missing? I did do a back up to my Time Machine before the crash. Can I plug it into it and reload format? I'm new to this so any help would be appreciated.
Thanks!

Well, let's hope that nothing was jiggled out of place when you were installing the new hard drive. Your optical drive may just be out of alignment or the disc you have is "dirty." Get a lint-free cloth and some rubbing alcohol, then clean the disc as thoroughly as you can starting from the center and working outward in a concentric circlular motion. See if that helps. In particular clean the inner portion well.
If this does not help, then you have a problem. You have opened the computer yourself. That action voids all support from Apple. If you take the computer in for service the store may refuse to service the computer. This is not related to your now expired warranty.

I have just bought my iphone 4S 32GB from three weeks ago and 'am facing a problem that in the middle of my calls it suddenly says call failed and it keeps on doing it every call i make

I have just bought my iphone 4S 32GB from three weeks ago and 'am facing a problem that in the middle of my calls it suddenly says call failed and it keeps on doing it every call i make .. I Don't know what to DO Please anyone help me i've got OS 5.0.1 and it's factory unlocked i've boughted from USA and it was sent to me where 'am living now in Egypt ...ANy Helpppppppppp Pleasee

try general>settings>reset>reset all settings and start up as an new phone.

Attempted to install AirPort Utility 6.0 on my new mac mini. Install failed and now the previous version 5.5.3 won't open. I downloaded and tried to instal 6.0 without software update, which failed, and my old 5.5.3 AirPort Utility still won't open? Help.

Now the previous version won't open. I downloaded and tried to instal 6.0 without software update, which failed, and my old 5.5.3 Airport Utility still won't open.
iTunes no longer recognizes my airport express.
Error Message:
None of the selected updates could be installed.
An unexpected error occurred.
Can't delete Airport Utility and reinstal from scratch as it is, “AirPort Utility” can’t be modified or deleted because it’s required by Mac OS X.
Any sugestions?

I reinstalled AirPort 5.5.3 which worked, but the app still won't launch but iTunes now recognizes my AirPort Express, I just hope I don't want to change its settings.

The automatic Firefox update to 3.6.13 keeps failing and I think it may be crashing my computer and I am unsure what to do.

I get the notice that there is a new update and if I want to restart Firefox. I click restart and then i get a message that the update fails and it will now download the entire file (?). I allow it to do this and then click restart again but get an error that failed also and to go to Firefox.com and download Firefox from the web site. This happened over the weekend and while I can't be sure it was the cause, my computer crashed and won't shut down and then would not restart. I had to go through a System Restore to get it working again. Any thoughts would be appreciated.
Edit: The Help section says it is version 3.6.13, so I am very confused right now although in system info on the right side of this page it says 3.6.12, so who knows which is correct. Thanks for any suggestions.

Is yours an iMac G5:
or a PowerMac G5:
There is a big difference in the cooling systems. If you have the tower, we can get your post moved to the forum where all the G5 tower gurus hang out.

I have three computers backing up onto the same Time Machine. The Hard drive of one has now failed, and I'd like to restore certain items (principally photographs) to one of the other two computers. How can I do this?

I have three computers backing up onto the same Time Machine. The Hard drive of one has now failed, and I'd like to restore certain items (principally photographs) to one of the other two computers. How can I do this?

"You can also browse the original backup disk for past backups by using "Browse other Time Machine Disks"--to see this choice, hold the Option key then click the Time Machine menu in the Finder (to see the menu, "Show Time Machine status in the menu bar" must be selected in Time Machine preferences."
Mac 101: Time Machine

Installing Mountain Lion from Snow Leopard, Install failed and HD write-locked

I recently downloaded the mountain lion installer from the App Store and I ran the installer. Stupid person as I am, I did not have any backups for my file and I naively assumed that an apple OS installer would be without flaws. Boy, was I wrong. I need every bytes of my data (or close to every bytes) but the installer failed.
Mid installation, the installer stopped and said that the installation failed and that I need to repair my disk. So I restarted the computer and I ran disk utilities (my start up disk was the OS installer and the installer allows me to run several programs, including terminal, disk utilities, and by the way, when I held option while starting up to see which start up disks I have, I only had the OS installer as the start up disk. Also, the installer allows me to run a program called "Startup Disk" when I click on the apple logo on the top left corner, but it doesn't allow me to startup my computer using Macintosh HD) and noticed that when I highlighted Macintosh HD, my "Repair Disk" button was grayed out. So first things first, I ran the "Verify Disk" button but after a minute or so, Disk Utilities said that verification failed and that Macintosh HD needs to be repaired. But the "repair disk" button is grayed out! So I went to the Mountain Lion installer again and ran it. Of course, it failed again so I restarted the computer.
So I tried to first back up all files in Macintosh HD to an external hard drive using Disk Utilities, and I used features such as "New Image" and "Restore" but they both ended up in "Input/Output error". I tried many methods with Disk Utilities but they resulted in errors.
After some research, I noticed that some people's computers worked after they reset their PRAM. So that's what I did. I held command+option+P+R when computer started up and I reset the PRAM. When the start up disk (which is the OS installer, not the normal operating system) loaded, I was greeted with choose languages option and then I was back in the Mountain Lion installer state. I again ran the installer again, hoping something would be different, but then it was different. But not in a good way. When I was told to choose where I would like to install Mountain Lion, I noticed that Macintosh HD was grayed out. Last time, I was at least able to run the installer but this time, Macintosh HD was grayed out. The installer said that my Macintosh HD was locked. After some research, I learned that apparently, the Mountain Lion installer write-locks Macintosh HD mid installation.
So now I am stuck and I am thinking of two things (plus some questions)
1. I am wondering if there is a way to unlock Macintosh HD. But even if I can unlock Macintosh HD, there is no guarantee that the installer will successfully install Mountain Lion, am I right?
a. so how can I un-write-lock Macintosh HD?
2. More realistically, I am thinking of borrowing someone else's macintosh computer and use it as the backup center. I have a firewire cable and a terrabyte external hard drive. So what I'm thinking is that I'll hook my computer in target mode to my friend's computer and I will also plug in my external hard drive to my friend's computer and then I can download and run Carbon Copy Cloner from my friend's computer to copy all data from my Macintosh HD to my external hard drive. And then I will erase my Macintosh HD, freshly install Mountain Lion onto it and then copy all data back from my external hard drive. But I am not sure about few things.
a. it looks like my Macintosh HD is write-locked. Can I still use Carbon Copy Cloner to copy all data from Macintosh HD (in target mode) to my external hard drive?
b. will my computer allow me to erase (or format) Macintosh HD?
c. will my erased/formatted Macintosh HD able to install + be installed Mountain Lion OS?
If you are here, then you have read my long long problem. Thank you very much and I would really really really appreciate your answers and opinions. Thanks

I'm not sure where you read that about the disk being "write-locked." That doesn't make much sense, given that the major task an installer like this must achieve is writing a whole bunch of files to the hard drive. I think your source was mistaken.
As to what happened, it sounds like your hard drive was badly corrupt to start with, or possibly was on the edge of failing and is now in the process of dying entirely. If you don't have backups of your data, that does not bode well for you, unfortunately. If you can manage to use target mode to copy your data, do that.
Once you're sure you've got all your data, you need to start up from your Snow Leopard install disk and repair the hard drive. (Since it sounds like the Mountain Lion installer didn't work, I wouldn't trust the recovery partition that Mountain Lion installs.) Or, even better, just erase the hard drive entirely and reinstall Snow Leopard. Then, once you're back up and running, with all your data back on the system and with Snow Leopard updated to the most recent version, try installing Mountain Lion again. If any of that fails again, the problem is likely to be a dying hard drive, and you'll need to replace it.

Firefox update is constantly failing and is stuck in a loop. I don't know how to bypass this. Help

When I start firefox, it automatically tries to install an update. This fails and it repeats, getting stuck in a loop which I can not get out of. Consequently, I am unable to open firefox and use the internet on this program. I have clicked ok, closed the dialogue box and ended the program using the task manager. None of these have worked. I prefer using firefox to other browsers but have had to return to internet explorer for the time being.
Do I need to uninstall and reinstall firefox or is there another option?

See http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Remove the files in the updates and updates\0 folder:
C:\Documents and Settings\<user>\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
(%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates)
Do a clean reinstall:
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.

Verify operation failed and Runtime Error While using Adobe Reader 10.1.2

We have installed Adobe reader 10.1.2 on Windows Servers 2008 and user are accessing its using Citrix.When users open PDF files they are getting message "Verify Operation Failed" and also getting error "Runtime Error"
even on one server we updated the version to 10.1.3 but still they are getting same error.
Pdf files open up but after multiple attempt..
Error are provided below

Hi, I have been using Citrix on Server 2008 for quite soemtime. And have not seen any such issues with Reader 10.1.2 and 10.1.3
Can you provide the event viewer log ? Also is the same issue seen while opening PDF in the Citrix Server ? Or it is mainly seen while Citrix Users accessing the published Reader app via Citrix Web URL ?

FM SSF_CLOSE failing and giving error message while printing a smartform

Hi,
for language spanish the smartform is not getting printed for output type SG11 but for english it is getting printed? What could be the reason? I debugged and found that SSF_CLOSE is failing and giving error message.
Thanks and regards,
AP.

Hi Aparajita,
for changing from one languages to another translations in SE63 is to be done, either search on SCN for using SE63 , or atleast see these wiki help .
Transaction SE63 - Translation Tools for Translators (BC-DOC-TTL) - SAP Library
Transaction SE63 (SAP Library - Translation Tools for Translators (BC-DOC-TTL))

_10.7 push install failed, and fubar'd everything

Just got a push notice to update to 10.7 (from 10.6.??). I acked the message, and after a zillion minutes, got an error message that the install failed, and that I need to do download only and manually install. So, I tried that. Failed with-- "The installer as encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2324." So, I tried uninstall, presumably of the 10.6.?? that's been on the machine for a while, and has been working. Uninstall fails with same error as above. So... I downloaded 10.7 and tried to install ON TOP OF current, still working install. Same permission error, and now, whatever munged version is actually on the machine (the previously working 10.6, 10.7, or some amalgam of the two) gives me the following error when I attempt to run it-- "The item referred to by this shortcut cannot be accessed. You may not have the appropriate permissions." If I Explorer to %ProgramFiles(x86)%\iTunes, I get "... is not accessible. Access is denied." I CAN access %ProgramFiles%\iTunes (the 64 bit folder), and there are files... but nothing executable... just a resource folder and a handful of dll's.
I am admin on the machine (actually, I am the ONLY human account on the machine... only others are typical system service accounts). Machine is WIN7 Premium, SP1. It is very stable, has no recent (in the last month or so) changes, except a hanful of Windows Update patched from last week.
Suggestions on how to get the machine out of this "iTunes is broken, but can't uninstall/install to fix it" loop???
Grrrrrr.

Community support seems to be slow moving . Others not having this problem?
I spent 4 hours culling through registry, killing off any keys that remotely resembled "apple" or "itunes," manually deleted program files, and then forced msiexec to unregister the GUID, mixed in with a zillion reboots, and was able to install 10.7 clean. BTW, SAME problem on second machine... so it is highly unlikely this is "a Windows problem." Apple, please check your installer package... methinks it'd fubar.

I tried to install the latest version of iTunes on my Windows PC, but the installation failed and I have the error message "Runtime Error R6034 An application has made an attempt to load the C runtime library incorrectly."

I tried to install the latest version of iTunes on my Windows PC, but the installation failed and I have the error message "Runtime Error R6034 An application has made an attempt to load the C runtime library incorrectly." When I then tried to run iTunes (assuming that, since the new install failed, my older version was still OK) I got the message "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 1114". I tried then uninstalling iTunes and reinstalling it fresh, but encountered the same problems. Help!

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Installing IOS 5.1.1 on my iPhone failed and now is not recognized by PC or itunes. All troubleshooting has failed. HELP!!!

Installing IOS 5.1.1 on my iphone failed and now the phone will not show up on itunes and is not recognized by my PC. I tried all troubleshooting Apple says to do minus uninstalling itunes. My wifes iphone still works fine with the same cable and itunes on my PC. ----- Help!

Hello. I was like this yesterday after upgrading 5.1.1. The proccess failed and the iphone only showed the USB cable with the iTunes logo.
What I did was connect the iphone to my wife's PC, and there, with a clean itunes installation, install a clean 5.1.1. Then, went back to my iMac and connect it again, and now it works.
But now, with my iphone working as new, it still cannot be showed up in itunes. I am still working on it.
Good luck!

Fail and Diswork

Similar Messages

Maybe you are looking for